hab noch was gefunden vllt hilft das: bcm2835-aux-uart 3f215040.serial: could not get clk: -517
Code: Alles auswählen
root@raspberrypi:/home/pi# dmesg -T
[Sat Jan 13 20:38:53 2018] Booting Linux on physical CPU 0x0
[Sat Jan 13 20:38:53 2018] Linux version 4.9.59-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #1047 SMP Sun Oct 29 12:19:23 GMT 2017
[Sat Jan 13 20:38:53 2018] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Sat Jan 13 20:38:53 2018] CPU: div instructions available: patching division code
[Sat Jan 13 20:38:53 2018] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Sat Jan 13 20:38:53 2018] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[Sat Jan 13 20:38:53 2018] cma: Reserved 8 MiB at 0x3ac00000
[Sat Jan 13 20:38:53 2018] Memory policy: Data cache writealloc
[Sat Jan 13 20:38:53 2018] On node 0 totalpages: 242688
[Sat Jan 13 20:38:53 2018] free_area_init_node: node 0, pgdat 80c6f380, node_mem_map ba3a1000
[Sat Jan 13 20:38:53 2018] Normal zone: 2133 pages used for memmap
[Sat Jan 13 20:38:53 2018] Normal zone: 0 pages reserved
[Sat Jan 13 20:38:53 2018] Normal zone: 242688 pages, LIFO batch:31
[Sat Jan 13 20:38:53 2018] percpu: Embedded 14 pages/cpu @ba35b000 s25600 r8192 d23552 u57344
[Sat Jan 13 20:38:53 2018] pcpu-alloc: s25600 r8192 d23552 u57344 alloc=14*4096
[Sat Jan 13 20:38:53 2018] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[Sat Jan 13 20:38:53 2018] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 240555
[Sat Jan 13 20:38:53 2018] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=1680 bcm2708_fb.fbheight=1050 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=51b64c4a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[Sat Jan 13 20:38:53 2018] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Sat Jan 13 20:38:53 2018] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Sat Jan 13 20:38:53 2018] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Sat Jan 13 20:38:53 2018] Memory: 940364K/970752K available (7168K kernel code, 486K rwdata, 2012K rodata, 1024K init, 770K bss, 22196K reserved, 8192K cma-reserved)
[Sat Jan 13 20:38:53 2018] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80800000 (8160 kB)
.init : 0x80b00000 - 0x80c00000 (1024 kB)
.data : 0x80c00000 - 0x80c79834 ( 487 kB)
.bss : 0x80c7b000 - 0x80d3b964 ( 771 kB)
[Sat Jan 13 20:38:53 2018] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Sat Jan 13 20:38:53 2018] Hierarchical RCU implementation.
[Sat Jan 13 20:38:53 2018] Build-time adjustment of leaf fanout to 32.
[Sat Jan 13 20:38:53 2018] NR_IRQS:16 nr_irqs:16 16
[Sat Jan 13 20:38:53 2018] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[Sat Jan 13 20:38:53 2018] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Sat Jan 13 20:38:53 2018] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Sat Jan 13 20:38:53 2018] Switching to timer-based delay loop, resolution 52ns
[Sat Jan 13 20:38:53 2018] Console: colour dummy device 80x30
[Sat Jan 13 20:38:53 2018] console [tty1] enabled
[Sat Jan 13 20:38:53 2018] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Sat Jan 13 20:38:53 2018] pid_max: default: 32768 minimum: 301
[Sat Jan 13 20:38:53 2018] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Jan 13 20:38:53 2018] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Jan 13 20:38:53 2018] Disabling memory control group subsystem
[Sat Jan 13 20:38:53 2018] CPU: Testing write buffer coherency: ok
[Sat Jan 13 20:38:53 2018] ftrace: allocating 22392 entries in 66 pages
[Sat Jan 13 20:38:53 2018] CPU0: update cpu_capacity 1024
[Sat Jan 13 20:38:53 2018] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Sat Jan 13 20:38:53 2018] Setting up static identity map for 0x100000 - 0x100034
[Sat Jan 13 20:38:53 2018] CPU1: update cpu_capacity 1024
[Sat Jan 13 20:38:53 2018] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Sat Jan 13 20:38:53 2018] CPU2: update cpu_capacity 1024
[Sat Jan 13 20:38:53 2018] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Sat Jan 13 20:38:53 2018] CPU3: update cpu_capacity 1024
[Sat Jan 13 20:38:53 2018] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Sat Jan 13 20:38:53 2018] Brought up 4 CPUs
[Sat Jan 13 20:38:53 2018] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Sat Jan 13 20:38:53 2018] CPU: All CPU(s) started in HYP mode.
[Sat Jan 13 20:38:53 2018] CPU: Virtualization extensions available.
[Sat Jan 13 20:38:53 2018] devtmpfs: initialized
[Sat Jan 13 20:38:53 2018] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Sat Jan 13 20:38:53 2018] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Sat Jan 13 20:38:53 2018] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Sat Jan 13 20:38:53 2018] pinctrl core: initialized pinctrl subsystem
[Sat Jan 13 20:38:53 2018] NET: Registered protocol family 16
[Sat Jan 13 20:38:53 2018] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Sat Jan 13 20:38:53 2018] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Sat Jan 13 20:38:53 2018] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Sat Jan 13 20:38:53 2018] Serial: AMBA PL011 UART driver
[Sat Jan 13 20:38:53 2018] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Sat Jan 13 20:38:53 2018] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Sat Jan 13 20:38:53 2018] irq: no irq domain found for /soc/aux@0x7e215000 !
[Sat Jan 13 20:38:53 2018] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1
[Sat Jan 13 20:38:53 2018] SCSI subsystem initialized
[Sat Jan 13 20:38:53 2018] usbcore: registered new interface driver usbfs
[Sat Jan 13 20:38:53 2018] usbcore: registered new interface driver hub
[Sat Jan 13 20:38:53 2018] usbcore: registered new device driver usb
[Sat Jan 13 20:38:53 2018] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-10-24 17:09
[Sat Jan 13 20:38:53 2018] clocksource: Switched to clocksource arch_sys_counter
[Sat Jan 13 20:38:53 2018] VFS: Disk quotas dquot_6.6.0
[Sat Jan 13 20:38:53 2018] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Sat Jan 13 20:38:53 2018] FS-Cache: Loaded
[Sat Jan 13 20:38:53 2018] CacheFiles: Loaded
[Sat Jan 13 20:38:53 2018] NET: Registered protocol family 2
[Sat Jan 13 20:38:53 2018] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Sat Jan 13 20:38:53 2018] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Sat Jan 13 20:38:53 2018] TCP: Hash tables configured (established 8192 bind 8192)
[Sat Jan 13 20:38:53 2018] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Sat Jan 13 20:38:53 2018] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Sat Jan 13 20:38:53 2018] NET: Registered protocol family 1
[Sat Jan 13 20:38:53 2018] RPC: Registered named UNIX socket transport module.
[Sat Jan 13 20:38:53 2018] RPC: Registered udp transport module.
[Sat Jan 13 20:38:53 2018] RPC: Registered tcp transport module.
[Sat Jan 13 20:38:53 2018] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Sat Jan 13 20:38:53 2018] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Sat Jan 13 20:38:53 2018] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Sat Jan 13 20:38:53 2018] FS-Cache: Netfs 'nfs' registered for caching
[Sat Jan 13 20:38:53 2018] NFS: Registering the id_resolver key type
[Sat Jan 13 20:38:53 2018] Key type id_resolver registered
[Sat Jan 13 20:38:53 2018] Key type id_legacy registered
[Sat Jan 13 20:38:53 2018] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Sat Jan 13 20:38:53 2018] io scheduler noop registered
[Sat Jan 13 20:38:53 2018] io scheduler deadline registered (default)
[Sat Jan 13 20:38:53 2018] io scheduler cfq registered
[Sat Jan 13 20:38:53 2018] BCM2708FB: allocated DMA memory fad10000
[Sat Jan 13 20:38:53 2018] BCM2708FB: allocated DMA channel 0 @ bb80f000
[Sat Jan 13 20:38:53 2018] Console: switching to colour frame buffer device 210x65
[Sat Jan 13 20:38:53 2018] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[Sat Jan 13 20:38:53 2018] bcm2835-aux-uart 3f215040.serial: could not get clk: -517
[Sat Jan 13 20:38:53 2018] bcm2835-rng 3f104000.rng: hwrng registered
[Sat Jan 13 20:38:53 2018] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Sat Jan 13 20:38:53 2018] vc-sm: Videocore shared memory driver
[Sat Jan 13 20:38:53 2018] brd: module loaded
[Sat Jan 13 20:38:53 2018] loop: module loaded
[Sat Jan 13 20:38:53 2018] Loading iSCSI transport class v2.0-870.
[Sat Jan 13 20:38:53 2018] usbcore: registered new interface driver smsc95xx
[Sat Jan 13 20:38:53 2018] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Sat Jan 13 20:38:53 2018] Core Release: 2.80a
[Sat Jan 13 20:38:53 2018] Setting default values for core params
[Sat Jan 13 20:38:53 2018] Finished setting default values for core params
[Sat Jan 13 20:38:53 2018] Using Buffer DMA mode
[Sat Jan 13 20:38:53 2018] Periodic Transfer Interrupt Enhancement - disabled
[Sat Jan 13 20:38:53 2018] Multiprocessor Interrupt Enhancement - disabled
[Sat Jan 13 20:38:53 2018] OTG VER PARAM: 0, OTG VER FLAG: 0
[Sat Jan 13 20:38:53 2018] Dedicated Tx FIFOs mode
[Sat Jan 13 20:38:53 2018] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xbad04000 dma = 0xfad04000 len=9024
[Sat Jan 13 20:38:53 2018] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[Sat Jan 13 20:38:53 2018] dwc_otg: Microframe scheduler enabled
[Sat Jan 13 20:38:53 2018] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x8058f5b0
[Sat Jan 13 20:38:53 2018] WARN::hcd_init_fiq:460: FIQ ASM at 0x8058f920 length 36
[Sat Jan 13 20:38:53 2018] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87a000
[Sat Jan 13 20:38:53 2018] dwc_otg 3f980000.usb: DWC OTG Controller
[Sat Jan 13 20:38:53 2018] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Sat Jan 13 20:38:53 2018] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Sat Jan 13 20:38:53 2018] Init: Port Power? op_state=1
[Sat Jan 13 20:38:53 2018] Init: Power Port (0)
[Sat Jan 13 20:38:53 2018] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Sat Jan 13 20:38:53 2018] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Sat Jan 13 20:38:53 2018] usb usb1: Product: DWC OTG Controller
[Sat Jan 13 20:38:53 2018] usb usb1: Manufacturer: Linux 4.9.59-v7+ dwc_otg_hcd
[Sat Jan 13 20:38:53 2018] usb usb1: SerialNumber: 3f980000.usb
[Sat Jan 13 20:38:53 2018] hub 1-0:1.0: USB hub found
[Sat Jan 13 20:38:53 2018] hub 1-0:1.0: 1 port detected
[Sat Jan 13 20:38:53 2018] dwc_otg: FIQ enabled
[Sat Jan 13 20:38:53 2018] dwc_otg: NAK holdoff enabled
[Sat Jan 13 20:38:53 2018] dwc_otg: FIQ split-transaction FSM enabled
[Sat Jan 13 20:38:53 2018] Module dwc_common_port init
[Sat Jan 13 20:38:53 2018] usbcore: registered new interface driver usb-storage
[Sat Jan 13 20:38:53 2018] mousedev: PS/2 mouse device common for all mice
[Sat Jan 13 20:38:53 2018] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Sat Jan 13 20:38:53 2018] bcm2835-cpufreq: min=1200000 max=1200000
[Sat Jan 13 20:38:53 2018] sdhci: Secure Digital Host Controller Interface driver
[Sat Jan 13 20:38:53 2018] sdhci: Copyright(c) Pierre Ossman
[Sat Jan 13 20:38:53 2018] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[Sat Jan 13 20:38:53 2018] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Sat Jan 13 20:38:53 2018] sdhci-pltfm: SDHCI platform and OF driver helper
[Sat Jan 13 20:38:53 2018] ledtrig-cpu: registered to indicate activity on CPUs
[Sat Jan 13 20:38:53 2018] hidraw: raw HID events driver (C) Jiri Kosina
[Sat Jan 13 20:38:53 2018] usbcore: registered new interface driver usbhid
[Sat Jan 13 20:38:53 2018] usbhid: USB HID core driver
[Sat Jan 13 20:38:53 2018] vchiq: vchiq_init_state: slot_zero = 0xbad80000, is_master = 0
[Sat Jan 13 20:38:53 2018] [vc_sm_connected_init]: start
[Sat Jan 13 20:38:53 2018] [vc_sm_connected_init]: end - returning 0
[Sat Jan 13 20:38:53 2018] Initializing XFRM netlink socket
[Sat Jan 13 20:38:53 2018] NET: Registered protocol family 17
[Sat Jan 13 20:38:53 2018] Key type dns_resolver registered
[Sat Jan 13 20:38:53 2018] Registering SWP/SWPB emulation handler
[Sat Jan 13 20:38:53 2018] registered taskstats version 1
[Sat Jan 13 20:38:53 2018] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Sat Jan 13 20:38:53 2018] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Sat Jan 13 20:38:53 2018] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 220, base_baud = 50000000) is a 16550
[Sat Jan 13 20:38:53 2018] sdhost: log_buf @ bad07000 (fad07000)
[Sat Jan 13 20:38:53 2018] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Sat Jan 13 20:38:53 2018] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Sat Jan 13 20:38:53 2018] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Sat Jan 13 20:38:53 2018] Indeed it is in host mode hprt0 = 00021501
[Sat Jan 13 20:38:53 2018] of_cfs_init
[Sat Jan 13 20:38:53 2018] of_cfs_init: OK
[Sat Jan 13 20:38:53 2018] random: fast init done
[Sat Jan 13 20:38:53 2018] Waiting for root device PARTUUID=51b64c4a-02...
[Sat Jan 13 20:38:53 2018] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Sat Jan 13 20:38:53 2018] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Jan 13 20:38:54 2018] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Jan 13 20:38:54 2018] mmc0: host does not support reading read-only switch, assuming write-enable
[Sat Jan 13 20:38:54 2018] mmc0: new high speed SDHC card at address 0001
[Sat Jan 13 20:38:54 2018] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
[Sat Jan 13 20:38:54 2018] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Sat Jan 13 20:38:54 2018] mmcblk0: p1 p2
[Sat Jan 13 20:38:54 2018] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Sat Jan 13 20:38:54 2018] Indeed it is in host mode hprt0 = 00001101
[Sat Jan 13 20:38:54 2018] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sat Jan 13 20:38:54 2018] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Jan 13 20:38:54 2018] devtmpfs: mounted
[Sat Jan 13 20:38:54 2018] Freeing unused kernel memory: 1024K
[Sat Jan 13 20:38:54 2018] mmc1: new high speed SDIO card at address 0001
[Sat Jan 13 20:38:54 2018] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Sat Jan 13 20:38:54 2018] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Jan 13 20:38:54 2018] hub 1-1:1.0: USB hub found
[Sat Jan 13 20:38:54 2018] hub 1-1:1.0: 5 ports detected
[Sat Jan 13 20:38:54 2018] systemd[1]: System time before build time, advancing clock.
[Sat Jan 13 20:38:54 2018] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Sat Jan 13 20:38:54 2018] NET: Registered protocol family 10
[Sat Jan 13 20:38:54 2018] ip_tables: (C) 2000-2006 Netfilter Core Team
[Sat Jan 13 20:38:54 2018] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Sat Jan 13 20:38:54 2018] systemd[1]: Detected architecture arm.
[Sat Jan 13 20:38:54 2018] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Sat Jan 13 20:38:54 2018] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Jan 13 20:38:54 2018] smsc95xx v1.0.5
[Sat Jan 13 20:38:54 2018] systemd[1]: Set hostname to <raspberrypi>.
[Sat Jan 13 20:38:54 2018] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:42:ac:6b
[Sat Jan 13 20:38:54 2018] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
[Sat Jan 13 20:38:55 2018] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c534
[Sat Jan 13 20:38:55 2018] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[Sat Jan 13 20:38:55 2018] usb 1-1.4: Product: USB Receiver
[Sat Jan 13 20:38:55 2018] usb 1-1.4: Manufacturer: Logitech
[Sat Jan 13 20:38:55 2018] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[Sat Jan 13 20:38:55 2018] input: Logitech USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C534.0001/input/input0
[Sat Jan 13 20:38:55 2018] systemd[1]: Listening on Syslog Socket.
[Sat Jan 13 20:38:55 2018] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[Sat Jan 13 20:38:55 2018] systemd[1]: Reached target Swap.
[Sat Jan 13 20:38:55 2018] systemd[1]: Listening on Journal Socket (/dev/log).
[Sat Jan 13 20:38:55 2018] systemd[1]: Listening on udev Kernel Socket.
[Sat Jan 13 20:38:55 2018] systemd[1]: Listening on Journal Socket.
[Sat Jan 13 20:38:55 2018] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3f980000.usb-1.4/input0
[Sat Jan 13 20:38:55 2018] input: Logitech USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0002/input/input1
[Sat Jan 13 20:38:55 2018] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3f980000.usb-1.4/input1
[Sat Jan 13 20:38:55 2018] eq3_char_loop: loading out-of-tree module taints kernel.
[Sat Jan 13 20:38:55 2018] Started plat_eq3ccu2
[Sat Jan 13 20:38:55 2018] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Sat Jan 13 20:38:55 2018] systemd-journald[114]: Received request to flush runtime journal from PID 1
[Sat Jan 13 20:38:56 2018] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Sat Jan 13 20:38:56 2018] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Sat Jan 13 20:38:56 2018] usbcore: registered new interface driver brcmfmac
[Sat Jan 13 20:38:56 2018] brcmfmac: Firmware version = wl0: Aug 7 2017 00:46:29 version 7.45.41.46 (r666254 CY) FWID 01-f8a78378
[Sat Jan 13 20:38:56 2018] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.41 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-08-07 00:37:47
[Sat Jan 13 20:38:57 2018] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[Sat Jan 13 20:38:57 2018] yahmbr0: port 1(eth0) entered blocking state
[Sat Jan 13 20:38:57 2018] yahmbr0: port 1(eth0) entered disabled state
[Sat Jan 13 20:38:57 2018] device eth0 entered promiscuous mode
[Sat Jan 13 20:38:57 2018] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Sat Jan 13 20:38:57 2018] IPv6: ADDRCONF(NETDEV_UP): yahmbr0: link is not ready
[Sat Jan 13 20:38:57 2018] cgroup: new mount options do not match the existing superblock, will be ignored
[Sat Jan 13 20:38:57 2018] fuse init (API version 7.26)
[Sat Jan 13 20:38:57 2018] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS
[Sat Jan 13 20:38:57 2018] random: crng init done
[Sat Jan 13 20:38:58 2018] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[Sat Jan 13 20:38:58 2018] yahmbr0: port 1(eth0) entered blocking state
[Sat Jan 13 20:38:58 2018] yahmbr0: port 1(eth0) entered forwarding state
[Sat Jan 13 20:38:58 2018] IPv6: ADDRCONF(NETDEV_CHANGE): yahmbr0: link becomes ready
[Sat Jan 13 20:39:01 2018] Bluetooth: Core ver 2.22
[Sat Jan 13 20:39:01 2018] NET: Registered protocol family 31
[Sat Jan 13 20:39:01 2018] Bluetooth: HCI device and connection manager initialized
[Sat Jan 13 20:39:01 2018] Bluetooth: HCI socket layer initialized
[Sat Jan 13 20:39:01 2018] Bluetooth: L2CAP socket layer initialized
[Sat Jan 13 20:39:01 2018] Bluetooth: SCO socket layer initialized
[Sat Jan 13 20:39:01 2018] Bluetooth: HCI UART driver ver 2.3
[Sat Jan 13 20:39:01 2018] Bluetooth: HCI UART protocol H4 registered
[Sat Jan 13 20:39:01 2018] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Sat Jan 13 20:39:01 2018] Bluetooth: HCI UART protocol Broadcom registered
[Sat Jan 13 20:39:01 2018] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Sat Jan 13 20:39:01 2018] Bluetooth: BNEP filters: protocol multicast
[Sat Jan 13 20:39:01 2018] Bluetooth: BNEP socket layer initialized
[Sat Jan 13 20:39:05 2018] yahmbr0: port 2(vethMN0UIM) entered blocking state
[Sat Jan 13 20:39:05 2018] yahmbr0: port 2(vethMN0UIM) entered disabled state
[Sat Jan 13 20:39:05 2018] device vethMN0UIM entered promiscuous mode
[Sat Jan 13 20:39:05 2018] IPv6: ADDRCONF(NETDEV_UP): vethMN0UIM: link is not ready
[Sat Jan 13 20:39:05 2018] eth0: renamed from veth21DHLT
[Sat Jan 13 20:39:06 2018] IPv6: ADDRCONF(NETDEV_CHANGE): vethMN0UIM: link becomes ready
[Sat Jan 13 20:39:06 2018] yahmbr0: port 2(vethMN0UIM) entered blocking state
[Sat Jan 13 20:39:06 2018] yahmbr0: port 2(vethMN0UIM) entered forwarding state