Hi,
habe heute meinen Raspberry ausgetauscht, aber durch den Wechsel vom alten externen LAN-Gateway
auf das neue Funkmodul funktioniert z.B. meine Fernbedienung nicht mehr.
Alter Rasperry: pivccu in aktueller Version mit externem LAN-Gatewayf. Backup aus der Systemsteuerung erstellt, alten raspi und LAN-Gateway abgegklemmt.
Neuer Rasperry: Mit identischer pivccu, Backup aus der Systemsteuerung eingespielt,
Das alte LAN-Gateway habe ich nach dem einspielen des Backups aus der Systemsteuerung/BidCos-RF Konfiguration entfernt.
alle Geraete erscheinen, aber ich kann mit der Fernbedienung z.B. die Kaffeemaschine nicht einschalten.
Welcher Schritt fehlt mir jetzt noch? Habe im Forum gesucht, bin aber bisher nicht fuendig geworden.
Danke fuer Hilfe!
Joerg
Wechsel von externem LAN-Gateway auf das neue Funkmodul
Moderator: Co-Administratoren
-
deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: Wechsel von externem LAN-Gateway auf das neue Funkmodul
Hi,
hast du auch die Gerätezuordnung angepasst? Sonst könnte ich mir vorstellen, dass da vom rfd versucht wird, über das nicht mehr existierende LAN GW zu funken.
Viele Grüße
Alex
hast du auch die Gerätezuordnung angepasst? Sonst könnte ich mir vorstellen, dass da vom rfd versucht wird, über das nicht mehr existierende LAN GW zu funken.
Viele Grüße
Alex
Re: Wechsel von externem LAN-Gateway auf das neue Funkmodul
Was meinst Du genau? Wenn ich mich richtig erinnere, hatte ich ja keinem Geraet das LAN-Gateway extra zugewiesen, sondern
nur das LAN-Gateway unter BidCos-RF Konfiguration eingerichtet.
Was muesste ich dort stattdessen eintragen?
Zur Auswahl habe ich nur
- RF HomeMatic RF-LAN Gateway
- RF HM Configuration Tool LAN
- Wired Homematic RS485 Gateway
Die passen doch alle nicht, oder?
lg
Joerg
nur das LAN-Gateway unter BidCos-RF Konfiguration eingerichtet.
Was muesste ich dort stattdessen eintragen?
Zur Auswahl habe ich nur
- RF HomeMatic RF-LAN Gateway
- RF HM Configuration Tool LAN
- Wired Homematic RS485 Gateway
Die passen doch alle nicht, oder?
lg
Joerg
-
klassisch
- Beiträge: 3974
- Registriert: 24.03.2011, 04:32
- System: Alternative CCU (auf Basis OCCU)
- Hat sich bedankt: 110 Mal
- Danksagung erhalten: 71 Mal
Re: Wechsel von externem LAN-Gateway auf das neue Funkmodul
-> Systemsteuerung -> LAN Gateway und Konfiguration -> Spalte rechts zu jedem Gerät "Einstellen"
Da kann man einzelne Geräte ans Gateway binden.
Da kann man einzelne Geräte ans Gateway binden.
Re: Wechsel von externem LAN-Gateway auf das neue Funkmodul
Dort habe ich ueberall “Standardgateway” eingestellt und neu gestartet.
Aber es ruehrt sich nichts...
Aber es ruehrt sich nichts...
-
Gluehwurm
- Beiträge: 12434
- Registriert: 19.03.2014, 00:37
- System: in Planung
- Hat sich bedankt: 105 Mal
- Danksagung erhalten: 380 Mal
Re: Wechsel von externem LAN-Gateway auf das neue Funkmodul
Gelöscht wegen Denkfehler ...
Gruß
Bruno
Gruß
Bruno
Zuletzt geändert von Gluehwurm am 06.08.2018, 22:05, insgesamt 1-mal geändert.
-
deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: Wechsel von externem LAN-Gateway auf das neue Funkmodul
Hi,
kannst du die Geräte über die Webobfläche einschalten? Und siehst du in der Weboberfläche bei der Fernbedienung, dass sich der Zeitstempel ändert?
Reden wir an der Stelle überhaupt von einem Zentralenprogramm? Weil das ja eigentlich schwer nach Direktverknüpfung schreit.
Viele Grüße
Alex
kannst du die Geräte über die Webobfläche einschalten? Und siehst du in der Weboberfläche bei der Fernbedienung, dass sich der Zeitstempel ändert?
Reden wir an der Stelle überhaupt von einem Zentralenprogramm? Weil das ja eigentlich schwer nach Direktverknüpfung schreit.
Viele Grüße
Alex
Re: Wechsel von externem LAN-Gateway auf das neue Funkmodul
- Ueber das WebUI laesst sich das auch nicht schalten.
- Wo in der Weboberflaeche laesst sich der Zeitstempel der Fernbedienung sehen?
Und ich sehe gerade noch eine Fehlermeldung, wenn ich unter Startseite > Programme und Verknüpfungen > Direkte Verknüpfungen
eine Neue Verknuepfung hinzufuegen will: "Interface-Prozess 'BidCos-RF' läuft nicht."
Weist das in Richtung des Fehlers?
lg
Joerg
- Wo in der Weboberflaeche laesst sich der Zeitstempel der Fernbedienung sehen?
Und ich sehe gerade noch eine Fehlermeldung, wenn ich unter Startseite > Programme und Verknüpfungen > Direkte Verknüpfungen
eine Neue Verknuepfung hinzufuegen will: "Interface-Prozess 'BidCos-RF' läuft nicht."
Weist das in Richtung des Fehlers?
lg
Joerg
-
deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: Wechsel von externem LAN-Gateway auf das neue Funkmodul
Hi,
ja, ohne BidCoS-RF a.k.a. RFD kann es nicht laufen.
Bitte einmal den Pi neu starten und dann nach ca. 5 Minuten folgende Befehle ausführen und die Ausgabe hier posten:
Viele Grüße
Alex
ja, ohne BidCoS-RF a.k.a. RFD kann es nicht laufen.
Bitte einmal den Pi neu starten und dann nach ca. 5 Minuten folgende Befehle ausführen und die Ausgabe hier posten:
Code: Alles auswählen
sudo pivccu-info
sudo pivccu-attach cat /var/log/messages
sudo pivccu-attach cat /var/log/hmserver.log
sudo ps aux
Alex
Re: Wechsel von externem LAN-Gateway auf das neue Funkmodul
sudo pivccu-info
sudo pivccu-attach cat /var/log/messages
sudo pivccu-attach cat /var/log/hmserver.log
sudo ps aux
Code: Alles auswählen
piVCCU version: 2.35.16-35
Kernel modules: Available
Raw UART dev: Available
Rasp.Pi3 UART: Assigned to GPIO pins
HMRF Hardware: RPI-RF-MOD
HMIP Hardware: RPI-RF-MOD
Board serial: 58a992f2f8
Radio MAC: 0xB555F4
SGTIN: 3014f711a0001f58a992f2f8
State: RUNNING
PID: 735
IP: 192.168.2.6
CPU use: 21.90 seconds
BlkIO use: 30.55 MiB
Link: vethpivccu
TX bytes: 1.78 MiB
RX bytes: 474.23 KiB
Total bytes: 2.24 MiB
Code: Alles auswählen
Aug 7 17:30:30 homematic-ccu2 syslog.info syslogd started: BusyBox v1.20.2
Aug 7 17:30:30 homematic-ccu2 user.notice kernel: klogd started: BusyBox v1.20.2 (2018-07-03 14:19:59 CEST)
Aug 7 15:30:32 homematic-ccu2 daemon.info ifplugd(eth0)[144]: ifplugd 0.28 initializing.
Aug 7 15:30:32 homematic-ccu2 daemon.info ifplugd(eth0)[144]: Using interface eth0/2A:3C:3D:B8:35:40 with driver <veth> (version: 1.0)
Aug 7 15:30:32 homematic-ccu2 daemon.info ifplugd(eth0)[144]: Using detection mode: SIOCETHTOOL
Aug 7 15:30:32 homematic-ccu2 daemon.info ifplugd(eth0)[144]: Initialization complete, link beat detected.
Aug 7 15:30:32 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: Could not open /dev/tty, cannot beep.
Aug 7 15:30:32 homematic-ccu2 daemon.info ifplugd(eth0)[144]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Aug 7 15:30:32 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: net.ipv4.tcp_timestamps = 0
Aug 7 15:30:32 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: udhcpc (v1.20.2) started
Aug 7 17:30:32 homematic-ccu2 user.debug setclock: Try to get time from 0.de.pool.ntp.org
Aug 7 15:30:32 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Sending discover...
Aug 7 17:30:32 homematic-ccu2 user.debug setclock: Tue Aug 7 17:30:32 CEST 2018
Aug 7 15:30:32 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Sending select for 192.168.2.6...
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Lease of 192.168.2.6 obtained, lease time 86400
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: netconfigcmd [-i ip-address] [-g gateway] [-n netmask] [-d1 dns-server] [-d2 dns-server]
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Sets the networkinformation
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Options:
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -i: current ip address
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -g: current gateway
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -n: current (sub) netmask
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -d1: current primary dns server
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -d2: current secondary dns server
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: netconfigcmd [-i ip-address] [-g gateway] [-n netmask] [-d1 dns-server] [-d2 dns-server]
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Sets the networkinformation
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Options:
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -i: current ip address
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -g: current gateway
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -n: current (sub) netmask
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -d1: current primary dns server
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -d2: current secondary dns server
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: rm: can't remove '/var/etc/resolv.conf': No such file or directory
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: udhcpc (v1.20.2) started
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Sending discover...
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Sending select for 192.168.2.6...
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Lease of 192.168.2.6 obtained, lease time 86400
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: netconfigcmd [-i ip-address] [-g gateway] [-n netmask] [-d1 dns-server] [-d2 dns-server]
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Sets the networkinformation
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Options:
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -i: current ip address
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -g: current gateway
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -n: current (sub) netmask
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -d1: current primary dns server
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -d2: current secondary dns server
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: netconfigcmd [-i ip-address] [-g gateway] [-n netmask] [-d1 dns-server] [-d2 dns-server]
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Sets the networkinformation
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: Options:
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -i: current ip address
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -g: current gateway
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -n: current (sub) netmask
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -d1: current primary dns server
Aug 7 15:30:33 homematic-ccu2 daemon.warn ifplugd(eth0)[144]: client: -d2: current secondary dns server
Aug 7 15:30:34 homematic-ccu2 daemon.info ifplugd(eth0)[144]: Program executed successfully.
Aug 7 17:30:34 homematic-ccu2 user.info kernel: [ 21.383491] sda: sda1
Aug 7 17:30:34 homematic-ccu2 user.notice kernel: [ 21.384644] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
Aug 7 17:30:34 homematic-ccu2 user.notice kernel: [ 21.385906] sd 0:0:0:0: [sda] Attached SCSI disk
Aug 7 17:30:34 homematic-ccu2 user.info kernel: [ 21.609001] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Aug 7 17:30:34 homematic-ccu2 user.info kernel: [ 21.609010] Bluetooth: BNEP filters: protocol multicast
Aug 7 17:30:34 homematic-ccu2 user.info kernel: [ 21.609024] Bluetooth: BNEP socket layer initialized
Aug 7 15:30:37 homematic-ccu2 user.info logger: Updating RF Lan Gateway Coprocessor Firmware
Aug 7 15:30:37 homematic-ccu2 user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Aug 7 15:30:37 homematic-ccu2 user.info logger: Updating RF Lan Gateway Firmware
Aug 7 15:30:37 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Aug 7 15:30:37 homematic-ccu2 user.info logger: Updating Wired Lan Gateway Firmware
Aug 7 15:30:37 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/hs485d.conf
Aug 7 17:30:37 homematic-ccu2 user.info kernel: [ 25.062063] eq3loop: created slave ttyS0
Aug 7 17:30:37 homematic-ccu2 user.info kernel: [ 25.062680] eq3loop: created slave mmd_bidcos
Aug 7 17:30:40 homematic-ccu2 user.err rfd: No BidCoS-Interface available
Aug 7 17:32:47 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug 7 17:32:47 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =init Params = {"xmlrpc_bin://127.0.0.1:1999","1007"} result= nil [iseXmlRpc.cpp:2599]
Aug 7 17:32:47 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallInit: CallXmlrpcMethod failed [iseXmlRpc.cpp:1204]
Aug 7 17:32:47 homematic-ccu2 local0.err ReGaHss: Error: XmlRpcClientThread::ThreadFunction(): failed call init for interface=BidCos-RF [iseRTHss.cpp:163]
Aug 7 17:32:47 homematic-ccu2 local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Aug 7 17:32:47 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =setValue Params = {"NEQ1502095:1","STATE",false} result= nil [iseXmlRpc.cpp:2599]
Aug 7 17:32:47 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1502]
Aug 7 17:32:47 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = NEQ1502095:1 [iseDOMdpHSS.cpp:77]
Aug 7 17:32:47 homematic-ccu2 local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: var x = dom.GetObject("Kaffeemaschine"); if ( x.Variable() == true ) { x.Variable(false); } else { x.Variable(true); } [iseESPexec.cpp:12500]
Aug 7 17:33:11 homematic-ccu2 user.debug setclock: Try to get time from 0.de.pool.ntp.org
Aug 7 17:33:11 homematic-ccu2 user.debug setclock: Tue Aug 7 17:33:11 CEST 2018
Code: Alles auswählen
Aug 7 17:30:43 de.eq3.lib.util.dynamics.GenericFactory INFO [main] @GenericFactory
Aug 7 17:30:43 de.eq3.lib.util.dynamics.GenericFactory INFO [main] creating instance of HMServerConfiguration with no-arg constructor
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [HMIPTRXWriterWorker] (1) *worker
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [KeyServerWorker] (1) *worker
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [KryoPersistenceWorker] (1) *worker
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [TransactionSubsystemHandler] (1) *worker
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [FirmwareLoaderFileSystem] (1) *worker
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LocalServerPersistentDataLoader] (1)
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LocalServerAdapterInitialization] (1)
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [BackendCommandHandler] (1)
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [DeviceInclusionAcceptHandler] (1)
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [CheckDeviceExistHandler] (1)
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [IncomingHMIPFrameHandler] (1)
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [DeviceBackgroundUpdateSubsystem] (1)
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [DeviceInclusionDefaultConfigurationChanger] (1)
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [CyclicSmokeDetectorAwakening] (1)
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LocalServerFirmwareUpdateInitialization] (1)
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyNotificationHandler] (1) *worker
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyAPIWorker] (1) *worker
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyBackendNotificationHandler] (3) *worker
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyBlindLevelCorrectionHandler] (1) *worker
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyInitializion] (1)
Aug 7 17:32:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: deploying 20 classes to Vert.x
Aug 7 17:32:27 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: 20 VertxDeployers initialized
Aug 7 17:32:27 de.eq3.cbcs.server.core.vertx.KeyServerWorker ERROR [vert.x-worker-thread-1] Missing key server configuration parameter (Network.Key) for mode: KEYSERVER_LOCAL
Aug 7 17:32:27 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-6] SYSTEM: start of CheckDeviceExistHandler succeeded (860f2a38-a6e9-44be-afea-3953fa1539c8)
Aug 7 17:32:27 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of CyclicSmokeDetectorAwakening succeeded (54a20be2-c24c-4201-a005-25e3a9d1cbcf)
Aug 7 17:32:27 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-0] SYSTEM: start of KeyServerWorker succeeded (9adea930-00a0-49de-b3c0-6feb36e5b431)
Aug 7 17:32:27 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of TransactionSubsystemHandler succeeded (8180a019-a097-4ab0-bec9-e2672845b32d)
Aug 7 17:32:27 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-0] SYSTEM: start of DeviceInclusionDefaultConfigurationChanger succeeded (3546ba58-05fd-485f-9c27-512f43b888bf)
Aug 7 17:32:27 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of LegacyBlindLevelCorrectionHandler succeeded (612ffb23-64ae-4319-aed6-5e1350754e72)
Aug 7 17:32:27 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-5] SYSTEM: start of HMIPTRXWriterWorker succeeded (90b558b0-3603-484e-b79f-22a406b42523)
Aug 7 17:32:27 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of KryoPersistenceWorker succeeded (4df7ec7b-3d96-48e4-8b03-2ab2f95442d2)
Aug 7 17:32:28 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-7] SYSTEM: start of LocalServerPersistentDataLoader succeeded (130c982a-515a-4567-a7e2-0bbc62072ba1)
Aug 7 17:32:28 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-3] SYSTEM: start of DeviceBackgroundUpdateSubsystem succeeded (1074d3bf-f792-44bc-93de-57d76adb0219)
Aug 7 17:32:28 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of IncomingHMIPFrameHandler succeeded (7a1628aa-a31a-4dd7-9fc6-324d3838f062)
Aug 7 17:32:28 de.eq3.cbcs.server.core.otau.util.FirmwareLoaderFileSystem INFO [vert.x-worker-thread-0] SYSTEM: Firmware update directory is set to /etc/config/firmware
Aug 7 17:32:28 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-7] SYSTEM: start of DeviceInclusionAcceptHandler succeeded (f57c33f7-6c57-433e-8b62-366170aed286)
Aug 7 17:32:28 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-3] SYSTEM: start of FirmwareLoaderFileSystem succeeded (228c92ea-3c69-4069-a20e-dfeee6aaa343)
Aug 7 17:32:28 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-7] SYSTEM: start of LegacyBackendNotificationHandler succeeded (1fae5d5e-e8b2-45b0-9039-7af888df484a)
Aug 7 17:32:28 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of LegacyNotificationHandler succeeded (d876ac28-bcaf-4a41-84d9-1b70acb4a679)
Aug 7 17:32:28 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-3] SYSTEM: start of BackendCommandHandler succeeded (817c1453-7a6e-4668-946e-d29d0d7d3272)
Aug 7 17:32:28 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of LegacyAPIWorker succeeded (f25968cd-4cd2-41be-b51b-70d8125aa766)
Aug 7 17:32:28 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-5] SYSTEM: start of LocalServerAdapterInitialization succeeded (1bfbb43e-16f3-41a2-9f88-bba8f5275506)
Aug 7 17:32:28 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] TRX adapter state 1: HMIP_TRX_App
Aug 7 17:32:28 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] TRX adapter application is already running
Aug 7 17:32:28 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] No NWK, try to set address ...
Aug 7 17:32:28 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Try to set radio address 11884020...
Aug 7 17:32:28 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Set max send attempts for 3014F711A0001F58A992F2F8 to 3
Aug 7 17:32:28 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Try to get application version...
Aug 7 17:32:28 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Application version 3.4.2
Aug 7 17:32:28 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Bootloader version 1.0.1
Aug 7 17:32:28 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] hmos version 1.28.0
Aug 7 17:32:28 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] MCU type: CC1310
Aug 7 17:32:28 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Duty Cycle: 0.0
Aug 7 17:32:28 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] set DutyCycle limit to ffffffc8
Aug 7 17:32:29 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Set Duty Cycle Limit
Aug 7 17:32:29 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Current Security Counter: 244822784
Aug 7 17:32:29 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Update security counter to calculation: 245069133
Aug 7 17:32:29 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] TRX adapter has 1 link partners
Aug 7 17:32:29 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Adapter with Access Point id 3014F711A0001F58A992F2F8 initialized
Aug 7 17:32:29 de.eq3.cbcs.server.local.base.internal.LocalServerAdapterInitialization INFO [Thread-6] HMIPTRXInitialResponseListener said that Adapter was initialized
Aug 7 17:32:30 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-0] SYSTEM: start of LocalServerFirmwareUpdateInitialization succeeded (a5a0b751-15c7-4cf4-987e-319a8b2cc98f)
Aug 7 17:32:30 de.eq3.cbcs.server.core.otau.util.FirmwareLoaderFileSystem WARN [vert.x-worker-thread-4] SYSTEM: Firmware update directory in config file is no valid directory: /etc/config/firmware
Aug 7 17:32:30 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-6] SYSTEM: Checking all devices on all accesspoints for updates
Aug 7 17:32:30 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-6] SYSTEM: There are 0 APs queued with updatable devices
Aug 7 17:32:30 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of LegacyInitializion succeeded (5bc52f38-a3ac-4073-8bd8-e15871a7db6c)
Aug 7 17:32:30 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: initial deployment complete _____________________________________________________
Aug 7 17:32:31 de.eq3.cbcs.server.local.LocalServer INFO [Thread-0] SYSTEM: Bind XML-RPC api to port 2010
Aug 7 17:32:31 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Default MaxEventLoopExecuteTime: 2000000000
Aug 7 17:32:31 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Default BlockedThreadCheckInterval: 1000
Aug 7 17:32:31 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Default MaxWorkerExecuteTime: 60000000000
Aug 7 17:32:31 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Default EventLoopPoolSize: 8
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [BackendWorker] (1) *worker
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [GroupRequestWorker] (1) *worker
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [DiagramRequestWorker] (1) *worker
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [StorageRequestWorker] (1) *worker
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [DeviceFirmwareRequestWorker] (1) *worker
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [EnergyPriceRequestWorker] (1) *worker
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [CouplingRequestWorker] (1) *worker
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [RegaClientWorker] (1) *worker
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [GroupConfigurationPersistenceFileSystem] (1) *worker
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: deploying 9 classes to Vert.x
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: 9 VertxDeployers initialized
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-5] SYSTEM: start of RegaClientWorker succeeded (3ce07e76-b436-44bb-b4a1-6d924f611d07)
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-5] SYSTEM: start of CouplingRequestWorker succeeded (0985b7cc-8c39-4ec0-b8f4-b909d6a2cfda)
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of StorageRequestWorker succeeded (411e4793-538d-4d3d-a84c-7d459a4f7dc3)
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of EnergyPriceRequestWorker succeeded (a5ced40e-f27f-4c00-b3d2-16163a210498)
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of BackendWorker succeeded (7cada33a-fb35-48aa-836e-1eb7b7abba07)
Aug 7 17:32:31 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-0] SYSTEM: start of GroupConfigurationPersistenceFileSystem succeeded (95f201bd-98f9-42f3-9923-7d7998662628)
Aug 7 17:32:32 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of DiagramRequestWorker succeeded (754bcc0b-d626-41a4-abd9-646d4f6a4884)
Aug 7 17:32:32 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of GroupRequestWorker succeeded (606345e1-f67d-4fac-a35a-4e15c6d92ee3)
Aug 7 17:32:32 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of DeviceFirmwareRequestWorker succeeded (794e3eec-f8fa-43d8-bf44-e3bc4247ac28)
Aug 7 17:32:32 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: initial deployment complete _____________________________________________________
Aug 7 17:32:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Starting HMServer at 127.0.0.1:9292
Aug 7 17:32:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Read Configuration
Aug 7 17:32:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create Bidcos Dispatcher
Aug 7 17:32:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] InitBidCosCache
Aug 7 17:32:33 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Thread-2] BidCosCache could not be initialized
Aug 7 17:32:33 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Thread-2] java.net.ConnectException: Connection refused (Connection refused)
Aug 7 17:32:33 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create groupDefinitionProvider
Aug 7 17:32:34 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create VirtualDeviceHolder
Aug 7 17:32:34 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create VirtualDeviceHandlerRega
Aug 7 17:32:34 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create GroupAdministrationService
Aug 7 17:32:34 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create GroupDeviceDispatcher
Aug 7 17:32:34 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create GroupDeviceHandler
Aug 7 17:32:34 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO [Thread-2] @GroupDeviceHandler - initializing...
Aug 7 17:32:34 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO [Thread-2] --> created groupDeviceDispatcher (GroupDeviceService to BidCoS (via Dispatcher))
Aug 7 17:32:34 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO [Thread-2] --> created virtualDeviceHandler (GroupDeviceService to ReGa)
Aug 7 17:32:34 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO [Thread-2] --> got groupDefinitionProvider
Aug 7 17:32:34 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create BidCosGroupMemberProvider
Aug 7 17:32:34 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Init groupAdministrationService
Aug 7 17:32:34 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Init Virtual OS Device
Aug 7 17:32:34 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Init ESHLight Bridge
Aug 7 17:32:35 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create RrdDatalogging
Aug 7 17:32:35 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create MeasurementService
Aug 7 17:32:35 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Init MeasurementService
Aug 7 17:32:35 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create HTTP Server
Aug 7 17:32:35 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create BidCos context and start handler
Aug 7 17:32:35 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create group context and start handler
Aug 7 17:32:35 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:32:35 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-3] (un)registerCallback on LegacyServiceHandler called from url: http://127.0.0.1:9292/bidcos
Aug 7 17:32:35 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-3] init finished
Aug 7 17:32:35 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO [vert.x-worker-thread-2] Added InterfaceId: HmIP-RF_java
Aug 7 17:32:36 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Starting HMServer done
Aug 7 17:32:40 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:32:45 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:32:47 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-1] (un)registerCallback on VirtualDeviceHandlerRega called from url: xmlrpc_bin://127.0.0.1:1999
Aug 7 17:32:47 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-1] Added InterfaceId: 1008
Aug 7 17:32:47 de.eq3.ccu.virtualdevice.service.internal.rega.BackendWorker INFO [vert.x-worker-thread-9] Execute BackendCommand: de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand
Aug 7 17:32:50 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:32:55 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:32:57 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-3] (un)registerCallback on LegacyServiceHandler called from url: xmlrpc_bin://127.0.0.1:1999
Aug 7 17:32:57 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-3] init finished
Aug 7 17:32:57 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO [vert.x-worker-thread-2] Added InterfaceId: 1009
Aug 7 17:33:00 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:33:05 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:33:10 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:33:15 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:33:20 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:33:25 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:33:30 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:33:35 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:33:40 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:33:45 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:33:50 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:33:55 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:34:00 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:34:05 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:34:10 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:34:15 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:34:20 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:34:25 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:34:30 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:34:35 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:34:40 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:34:45 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:34:50 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:34:55 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:35:00 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:35:05 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:35:10 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:35:15 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:35:20 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:35:25 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:35:30 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:35:35 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:35:40 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:35:45 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:35:50 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:35:55 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:36:00 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:36:05 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:36:10 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:36:15 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:36:20 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:36:25 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:36:30 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:36:35 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:36:40 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:36:45 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:36:50 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:36:55 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:37:00 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:37:05 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:37:10 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:37:15 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:37:20 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:37:25 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:37:28 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-6] SYSTEM: 0 Accesspoints in Queue
Aug 7 17:37:28 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-6] SYSTEM: Permanent-/Burstlistener Handler utilization: 0/50 used
Aug 7 17:37:28 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-6] SYSTEM: Eventlistener Handler utilization: 0/50 used
Aug 7 17:37:30 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:37:35 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:37:40 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:37:45 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:37:50 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Aug 7 17:37:55 de.eq3.ccu.bidcos.dispatcher.BidCosRpcDispatcher ERROR [Timer-2] Could not register BidCos-RF_java
Code: Alles auswählen
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.3 0.6 27020 6016 ? Ss 17:31 0:01 /sbin/init
root 2 0.0 0.0 0 0 ? S 17:31 0:00 [kthreadd]
root 3 0.0 0.0 0 0 ? I 17:31 0:00 [kworker/0:0]
root 4 0.0 0.0 0 0 ? I< 17:31 0:00 [kworker/0:0H]
root 5 0.0 0.0 0 0 ? I 17:31 0:00 [kworker/u8:0]
root 6 0.0 0.0 0 0 ? I< 17:31 0:00 [mm_percpu_wq]
root 7 0.0 0.0 0 0 ? S 17:31 0:00 [ksoftirqd/0]
root 8 0.0 0.0 0 0 ? I 17:31 0:00 [rcu_sched]
root 9 0.0 0.0 0 0 ? I 17:31 0:00 [rcu_bh]
root 10 0.0 0.0 0 0 ? S 17:31 0:00 [migration/0]
root 11 0.0 0.0 0 0 ? S 17:31 0:00 [cpuhp/0]
root 12 0.0 0.0 0 0 ? S 17:31 0:00 [cpuhp/1]
root 13 0.0 0.0 0 0 ? S 17:31 0:00 [migration/1]
root 14 0.0 0.0 0 0 ? S 17:31 0:00 [ksoftirqd/1]
root 16 0.0 0.0 0 0 ? I< 17:31 0:00 [kworker/1:0H]
root 17 0.0 0.0 0 0 ? S 17:31 0:00 [cpuhp/2]
root 18 0.0 0.0 0 0 ? S 17:31 0:00 [migration/2]
root 19 0.0 0.0 0 0 ? S 17:31 0:00 [ksoftirqd/2]
root 21 0.0 0.0 0 0 ? I< 17:31 0:00 [kworker/2:0H]
root 22 0.0 0.0 0 0 ? S 17:31 0:00 [cpuhp/3]
root 23 0.0 0.0 0 0 ? S 17:31 0:00 [migration/3]
root 24 0.0 0.0 0 0 ? S 17:31 0:00 [ksoftirqd/3]
root 26 0.0 0.0 0 0 ? I< 17:31 0:00 [kworker/3:0H]
root 27 0.0 0.0 0 0 ? S 17:31 0:00 [kdevtmpfs]
root 28 0.0 0.0 0 0 ? I< 17:31 0:00 [netns]
root 29 0.0 0.0 0 0 ? I 17:31 0:00 [kworker/0:1]
root 30 0.0 0.0 0 0 ? I 17:31 0:00 [kworker/1:1]
root 31 0.0 0.0 0 0 ? I 17:31 0:00 [kworker/2:1]
root 32 0.0 0.0 0 0 ? I 17:31 0:00 [kworker/3:1]
root 33 0.0 0.0 0 0 ? S 17:31 0:00 [khungtaskd]
root 34 0.0 0.0 0 0 ? S 17:31 0:00 [oom_reaper]
root 35 0.0 0.0 0 0 ? I< 17:31 0:00 [writeback]
root 36 0.0 0.0 0 0 ? S 17:31 0:00 [kcompactd0]
root 37 0.0 0.0 0 0 ? I< 17:31 0:00 [crypto]
root 38 0.0 0.0 0 0 ? I< 17:31 0:00 [kblockd]
root 39 0.0 0.0 0 0 ? I< 17:31 0:00 [watchdogd]
root 40 0.0 0.0 0 0 ? I< 17:31 0:00 [rpciod]
root 41 0.0 0.0 0 0 ? I< 17:31 0:00 [xprtiod]
root 44 0.0 0.0 0 0 ? S 17:31 0:00 [kswapd0]
root 45 0.0 0.0 0 0 ? I< 17:31 0:00 [nfsiod]
root 55 0.0 0.0 0 0 ? I< 17:31 0:00 [kthrotld]
root 56 0.0 0.0 0 0 ? I< 17:31 0:00 [iscsi_eh]
root 57 0.0 0.0 0 0 ? I< 17:31 0:00 [dwc_otg]
root 58 0.0 0.0 0 0 ? I< 17:31 0:00 [DWC Notificatio]
root 59 0.0 0.0 0 0 ? S< 17:31 0:00 [vchiq-slot/0]
root 60 0.0 0.0 0 0 ? S< 17:31 0:00 [vchiq-recy/0]
root 61 0.0 0.0 0 0 ? S< 17:31 0:00 [vchiq-sync/0]
root 62 0.0 0.0 0 0 ? S 17:31 0:00 [vchiq-keep/0]
root 63 0.0 0.0 0 0 ? S< 17:31 0:00 [SMIO]
root 65 0.0 0.0 0 0 ? S 17:31 0:00 [irq/92-mmc1]
root 66 0.0 0.0 0 0 ? I 17:31 0:00 [kworker/2:3]
root 67 0.1 0.0 0 0 ? S 17:31 0:00 [mmcqd/0]
root 68 0.0 0.0 0 0 ? S 17:31 0:00 [jbd2/mmcblk0p2-]
root 69 0.0 0.0 0 0 ? I< 17:31 0:00 [ext4-rsv-conver]
root 70 0.0 0.0 0 0 ? I< 17:31 0:00 [ipv6_addrconf]
root 84 0.0 0.0 0 0 ? I< 17:31 0:00 [kworker/1:1H]
root 103 0.0 0.4 26924 4512 ? Ss 17:31 0:00 /lib/systemd/systemd-journald
root 123 0.0 0.0 0 0 ? I 17:31 0:00 [kworker/3:2]
root 126 0.0 0.3 14468 3264 ? Ss 17:31 0:00 /lib/systemd/systemd-udevd
root 212 0.0 0.0 0 0 ? I< 17:31 0:00 [kworker/3:1H]
root 219 0.0 0.0 0 0 ? I< 17:31 0:00 [cfg80211]
root 220 0.0 0.0 0 0 ? S 17:31 0:00 [scsi_eh_0]
root 221 0.0 0.0 0 0 ? I< 17:31 0:00 [scsi_tmf_0]
root 222 0.0 0.0 0 0 ? S 17:31 0:00 [usb-storage]
root 229 0.0 0.0 0 0 ? I< 17:31 0:00 [brcmf_wq/mmc1:0]
root 230 0.0 0.0 0 0 ? S 17:31 0:00 [brcmf_wdog/mmc1]
root 231 0.0 0.0 0 0 ? I 17:31 0:00 [kworker/1:3]
systemd+ 263 0.0 0.3 17280 3676 ? Ssl 17:31 0:00 /lib/systemd/systemd-timesyncd
root 346 0.0 0.0 0 0 ? S 17:31 0:00 [irq/169-usb-001]
nobody 356 0.0 0.2 5296 2408 ? Ss 17:31 0:00 /usr/sbin/thd --triggers /etc/triggerhappy/triggers.d/ --socket /run/thd
root 358 0.0 0.2 5700 2512 ? Ss 17:31 0:00 /usr/sbin/cron -f
root 360 0.0 0.2 23748 2476 ? Ssl 17:31 0:00 /usr/sbin/rsyslogd -n
avahi 362 0.1 0.2 6536 2724 ? Ss 17:31 0:00 avahi-daemon: running [raspi2.local]
message+ 365 0.0 0.3 6384 3356 ? Ss 17:31 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --
avahi 392 0.0 0.0 6404 324 ? S 17:31 0:00 avahi-daemon: chroot helper
root 393 0.0 0.0 0 0 ? I< 17:31 0:00 [kworker/2:1H]
root 414 0.0 0.0 0 0 ? I 17:31 0:00 [kworker/u8:3]
root 423 0.0 0.4 7380 4180 ? Ss 17:31 0:00 /lib/systemd/systemd-logind
root 492 0.0 0.2 6644 2040 ? Ss 17:32 0:00 /sbin/dhclient -4 -v -pf /run/dhclient.br0.pid -lf /var/lib/dhcp/dhclien
root 552 0.0 0.1 4600 1388 tty1 Ss+ 17:32 0:00 /sbin/agetty --noclear tty1 linux
root 566 0.0 0.4 10208 4648 ? Ss 17:32 0:00 /usr/sbin/sshd -D
pi 592 0.0 0.5 9664 5204 ? Ss 17:32 0:00 /lib/systemd/systemd --user
pi 603 0.0 0.1 11276 1328 ? S 17:32 0:00 (sd-pam)
pi 629 1.7 4.4 133192 42432 ? Sl 17:32 0:07 homebridge
redis 630 0.3 0.3 30088 3160 ? Ssl 17:32 0:01 /usr/bin/redis-server 127.0.0.1:6379
root 660 2.0 4.7 139736 44780 ? Ssl 17:32 0:08 iobroker.js-controller
root 724 0.0 0.3 8200 3348 ? Ss 17:32 0:00 /usr/bin/lxc-start --lxcpath /var/lib/piVCCU --name lxc --pidfile /var/r
root 735 0.0 0.1 2388 1444 ? Ss 17:32 0:00 init
root 769 1.5 4.6 139440 43748 ? Sl 17:32 0:06 io.admin.0
root 844 0.0 0.1 2472 1636 ? Ss 17:32 0:00 /usr/sbin/crond
root 848 0.0 0.0 2388 52 ? Ss 17:32 0:00 /sbin/syslogd -m 0
root 850 0.0 0.0 2388 48 ? Ss 17:32 0:00 /sbin/klogd
root 917 0.0 0.0 1988 68 ? S 17:32 0:00 /usr/sbin/ifplugd -i eth0 -fI -u0 -d10
root 1008 0.0 0.0 2388 60 ? Ss 17:32 0:00 udhcpc -x hostname homematic-ccu2 -V eQ3-CCU2 -b -s /bin/dhcp.script
root 1010 0.0 0.0 0 0 ? I< 17:32 0:00 [kworker/u9:0]
root 1015 0.0 0.0 0 0 ? I< 17:32 0:00 [kworker/u9:2]
root 1016 0.0 0.0 2096 152 ? S 17:32 0:00 /usr/bin/hciattach /dev/serial1 bcm43xx 460800 noflow - b8:27:eb:80:9a:9
root 1018 0.0 0.3 7076 3380 ? Ss 17:32 0:00 /usr/lib/bluetooth/bluetoothd
root 1021 0.4 3.9 118728 37384 ? Sl 17:32 0:01 io.discovery.0
root 1067 0.0 0.0 3744 904 ? S 17:32 0:00 /bin/eq3configd
root 1068 0.0 0.0 3720 896 ? S 17:32 0:00 /bin/ssdpd
root 1073 0.0 0.2 5004 2820 ? S 17:32 0:00 /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf
root 1107 0.0 0.1 4404 952 ? Sl 17:32 0:00 /bin/multimacd -f /etc/config/multimacd.conf -l 5
root 1121 0.6 3.6 129468 34476 ? Sl 17:32 0:02 io.web.0
root 1155 4.4 6.9 159068 65736 ? Sl 17:32 0:18 java -Xmx64m -Dlog4j.configuration=file:///etc/config/log4j.xml -Dfile.e
root 1181 0.4 3.9 118736 37632 ? Sl 17:32 0:01 io.history.0
root 1226 1.4 6.2 155084 59288 ? Sl 17:32 0:05 io.javascript.0
root 1263 0.8 3.6 130532 34840 ? Sl 17:32 0:03 io.rpi2.0
root 1314 0.4 3.7 122084 35320 ? Sl 17:32 0:01 io.socketio.0
root 1332 0.0 0.8 15852 7708 ? Sl 17:32 0:00 /bin/ReGaHss.normal -f /etc/rega.conf -l 2
root 1372 0.0 0.0 0 0 ? I< 17:32 0:00 [kworker/0:1H]
root 1400 0.0 0.6 11528 5732 ? Ss 17:33 0:00 sshd: pi [priv]
pi 1410 0.0 0.4 11528 3828 ? S 17:33 0:00 sshd: pi@pts/1
pi 1413 0.0 0.4 6608 4196 pts/1 Ss 17:33 0:00 -bash
root 1439 0.0 0.2 3832 1992 ? S 17:33 0:00 ntpclient -h 0.de.pool.ntp.org -l
root 1685 0.0 0.0 0 0 ? I 17:36 0:00 [kworker/0:2]
root 1786 0.0 0.3 7632 3448 pts/1 S+ 17:39 0:00 sudo ps aux
root 1790 0.0 0.2 8116 2796 pts/1 R+ 17:39 0:00 ps aux