Wird es eine Möglichkeit geben, diese Nummer per Software anpassen zu können?
Möchte ungern eine sehr zu meiner Zufriedenheit laufende Hardware entsorgen und etwas neues (von dem ich noch nicht weiß, ob es ebenfalls so stabil laufen wird) kaufen müssen.
Auch ein Verzicht auf Homeputer wäre nach einem mit den Jahren gewachsenen Vorrat an Progrämmchen ein erheblicher Aufwand.
Übrigens: Das soll jetzt ausdrücklich kein Vorwurf an Alex sein!
Nur eine demütige Anfrage, ob es evtl. aktuell (oder in Zukunft) eine Anpassungsmöglichkeit geben könnte...
Erstes piVCCU3 Stable Release
Moderator: Co-Administratoren
-
deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: Erstes piVCCU3 Stable Release
Hi,
ich kenne eine Möglichkeit, welche die /proc/cpuinfo in einer Weise bereitstellt, dass man da eine eigene Seriennummer angeben kann. Nur die einzubauen, nur damit Homputer die Lizenzprüfung hinbekommt und mit dem Wissen, dass ich dadurch an sich eine Möglichkeit zur Umgehung von Kopierschutzmaßnahmen implementiere, ist rechtlich sehr dünnes Eis, auf welches ich mich nicht wirklich begeben will.
An sich sehe ich hier auch Homputer als das Problem an, die Lizenzprüfung wird auf einer reinen RaspberryMatic Installation mit Tinkerboard ebenfalls nicht funktionieren.
Viele Grüße
Alex
ich kenne eine Möglichkeit, welche die /proc/cpuinfo in einer Weise bereitstellt, dass man da eine eigene Seriennummer angeben kann. Nur die einzubauen, nur damit Homputer die Lizenzprüfung hinbekommt und mit dem Wissen, dass ich dadurch an sich eine Möglichkeit zur Umgehung von Kopierschutzmaßnahmen implementiere, ist rechtlich sehr dünnes Eis, auf welches ich mich nicht wirklich begeben will.
An sich sehe ich hier auch Homputer als das Problem an, die Lizenzprüfung wird auf einer reinen RaspberryMatic Installation mit Tinkerboard ebenfalls nicht funktionieren.
Viele Grüße
Alex
Re: Erstes piVCCU3 Stable Release
Verstehe.
Also muss ich, solange Homeputer seine Lizenzprüfung nicht verbessert, entweder auf Homeputer oder pivccu3 verzichten.
Ärgerlich.
Also muss ich, solange Homeputer seine Lizenzprüfung nicht verbessert, entweder auf Homeputer oder pivccu3 verzichten.
Ärgerlich.
-
deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: Erstes piVCCU3 Stable Release
Hi,
frag halt an nach einem Lizenzschlüssel mit C0000000 und sag, dass du RaspberryMatic mit einem Tinkerboard hast, steht ja nirgendwo auf der Seite, dass nur der Raspberry unterstützt wird.
Viele Grüße
Alex
frag halt an nach einem Lizenzschlüssel mit C0000000 und sag, dass du RaspberryMatic mit einem Tinkerboard hast, steht ja nirgendwo auf der Seite, dass nur der Raspberry unterstützt wird.
Viele Grüße
Alex
-
wendy2702
- Beiträge: 463
- Registriert: 05.03.2014, 19:31
- Hat sich bedankt: 1 Mal
- Danksagung erhalten: 1 Mal
Re: Erstes piVCCU3 Stable Release
Hi,
jetzt muss ich leider doch mal Fragen.
Hatte bisher piVCCU2 auf einem PI3 mit RPI-RF-MOD laufen. Das ganze auf USB Stick und nicht SD Karte.
Bin jetzt der Anleitung im ersten Post gefolgt und bekomme nachdem ich CUXD eingespielt habe immer diese Fehlermeldungen:
Auch kann ich die Seite "Allgemeine Einstellungen" nicht aufrufen.
Die CCU3 läuft noch auf einer anderen IP Adresse als vorher die CCU2. HmIP Geräte habe ich keine im Einsatz.
Auf der CCU2 lief ganz früher als es noch die Original CCU war mal HVL, das hatte ich aber eigentlich nach Anleitung gelöscht.
Muss ich da noch etwas machen oder wo liegt der Fehler/ das Problem ?
Danke und Gruß
Mirko
Edit: Scheinbar kommen die beiden Fehler immer unmittelbar nachdem ich versuche "Allgemeine Einstellungen" oder "Kopplungen" zu öffnen.
Noch ein paar logs:
jetzt muss ich leider doch mal Fragen.
Hatte bisher piVCCU2 auf einem PI3 mit RPI-RF-MOD laufen. Das ganze auf USB Stick und nicht SD Karte.
Bin jetzt der Anleitung im ersten Post gefolgt und bekomme nachdem ich CUXD eingespielt habe immer diese Fehlermeldungen:
Code: Alles auswählen
^Cpi@pi_piVCCU:~ $ sudo pivccu-info
piVCCU version: 3.37.8-6
Kernel modules: Available
Raw UART dev: Available
Rasp.Pi3 UART: Assigned to GPIO pins
HMRF Hardware: RPI-RF-MOD
HMIP Hardware: RPI-RF-MOD
Board serial: 58A992F7B6
Radio MAC: unknown
SGTIN: 3014F711A0001F58A992F7B6
State: RUNNING
PID: 3549
IP: 192.168.178.95
CPU use: 62.04 seconds
BlkIO use: 1.68 MiB
Link: vethIXRVGC
TX bytes: 7.98 MiB
RX bytes: 3.26 MiB
Total bytes: 11.24 MiB
pi@pi_piVCCU:~ $
Auf der CCU2 lief ganz früher als es noch die Original CCU war mal HVL, das hatte ich aber eigentlich nach Anleitung gelöscht.
Muss ich da noch etwas machen oder wo liegt der Fehler/ das Problem ?
Danke und Gruß
Mirko
Edit: Scheinbar kommen die beiden Fehler immer unmittelbar nachdem ich versuche "Allgemeine Einstellungen" oder "Kopplungen" zu öffnen.
Noch ein paar logs:
Code: Alles auswählen
pi@pi_piVCCU:~ $ sudo pivccu-attach tail -f /var/log/hmserver.log
Nov 13 13:48:09 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-5] SYSTEM ADVICE: pre-conditions for deployment of LocalServerFirmwareUpdateInitialization still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:09 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-4] SYSTEM ADVICE: pre-conditions for deployment of LegacyInitializion still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:16 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-0] SYSTEM ADVICE: long-lasting deployment, check deployment configuration - currently deployed 18 out of 20
Nov 13 13:48:16 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-5] SYSTEM ADVICE: pre-conditions for deployment of LocalServerFirmwareUpdateInitialization still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:16 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-4] SYSTEM ADVICE: pre-conditions for deployment of LegacyInitializion still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:23 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-5] SYSTEM ADVICE: pre-conditions for deployment of LocalServerFirmwareUpdateInitialization still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:30 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-0] SYSTEM ADVICE: long-lasting deployment, check deployment configuration - currently deployed 18 out of 20
Nov 13 13:48:23 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-4] SYSTEM ADVICE: pre-conditions for deployment of LegacyInitializion still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:30 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-4] SYSTEM ADVICE: pre-conditions for deployment of LegacyInitializion still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:30 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-5] SYSTEM ADVICE: pre-conditions for deployment of LocalServerFirmwareUpdateInitialization still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:37 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-5] SYSTEM ADVICE: pre-conditions for deployment of LocalServerFirmwareUpdateInitialization still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:37 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-4] SYSTEM ADVICE: pre-conditions for deployment of LegacyInitializion still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:44 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-0] SYSTEM ADVICE: long-lasting deployment, check deployment configuration - currently deployed 18 out of 20
Nov 13 13:48:44 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-5] SYSTEM ADVICE: pre-conditions for deployment of LocalServerFirmwareUpdateInitialization still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:44 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-4] SYSTEM ADVICE: pre-conditions for deployment of LegacyInitializion still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:51 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-5] SYSTEM ADVICE: pre-conditions for deployment of LocalServerFirmwareUpdateInitialization still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 13:48:51 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-4] SYSTEM ADVICE: pre-conditions for deployment of LegacyInitializion still not met - check deployment configuration (still unfulfilled: [connector.open])
^Cpi@pi_piVCCU:~ $
Code: Alles auswählen
Cpi@pi_piVCCU:~ $ sudo pivccattach tail -f /var/log/messages
Nov 13 13:49:33 ccu3-webui user.debug rfd: HSSXmlRpcEventDispatcher::Handle send completed
Nov 13 13:49:33 ccu3-webui user.debug rfd: HSSXmlRpcEventDispatcher::Handle send completed
Nov 13 13:49:40 ccu3-webui user.debug dސ~^B: C<: #150 TRX GetDutyCycle
Nov 13 13:49:40 ccu3-webui user.debug dސ~^B: C< @3445503: bin:FD 00 03 01 96 03 EC 17
Nov 13 13:49:41 ccu3-webui user.debug dސ~^B: C> @3445608: #150 TRX Response Ack 3F
Nov 13 13:49:41 ccu3-webui user.debug dސ~^B: SubsystemBidcos::CheckDutyCycleEventThreshold( 31.5, 31.5 ) = 0
Nov 13 13:49:50 ccu3-webui user.debug dސ~^B: C<: #151 TRX GetDutyCycle
Nov 13 13:49:50 ccu3-webui user.debug dސ~^B: C< @3455504: bin:FD 00 03 01 97 03 6A 14
Nov 13 13:49:51 ccu3-webui user.debug dސ~^B: C> @3455608: #151 TRX Response Ack 3F
Nov 13 13:49:51 ccu3-webui user.debug dސ~^B: SubsystemBidcos::CheckDutyCycleEventThreshold( 31.5, 31.5 ) = 0
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: C> @3458114: #71 LLMAC RX @ 704ms -60dBm AB A6 10 46 6B 1F 25 2A 41 06 01 00 00
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: Bidcos RX: #AB[BiDi|BC|Ren|WMup] 466B1F->252A41 Info: 06 01 00 00
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: GetAckActionForIncomingTelegram() channel=1
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: GetAckActionForIncomingTelegram() ackAction=AckAction_AesChallenge, wakeup=None
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: BidcosMacController::SendAESChallenge()
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: MacController::OnDownstreamFrame(#255 LLMAC TX @ 810ms [10k,NoCCA] AB A0 02 25 2A 41 46 6B 1F 04 66 0F FC 91 6A 14 00)
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: BidcosMacController::SendAESChallenge() - autoTxState=AutoTxState_AesChallenge, txState=TxState_WaitCoproResponseAesSolution
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: AutoTx: #AB[BiDi|Ren] 252A41->466B1F Ack: 04 66 0F FC 91 6A 14 00
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: C<: #152 LLMAC TX @ 810ms [10k,NoCCA] AB A0 02 25 2A 41 46 6B 1F 04 66 0F FC 91 6A 14 00
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: C< @3458115: bin:FD 00 17 03 98 06 03 2A 80 AB A0 02 25 2A 41 46 6B 1F 04 66 0F FC 7C 91 6A 14 00 FC 7D 0D
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: C> @3458243: #152 LLMAC Response ACK @810: 03 2A
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: _txState = TxState_WaitAesSolution
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: C> @3458380: #72 LLMAC RX @ 967ms -60dBm AB A6 03 46 6B 1F 25 2A 41 5A 5F F6 48 60 6D 92 3B CB 66 2A 39 95 62 8F AE
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: Bidcos RX: #AB[BiDi|BC|Ren|WMup] 466B1F->252A41 AesSolution: 5A 5F F6 48 60 6D 92 3B CB 66 2A 39 95 62 8F AE
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: GetAckActionForIncomingTelegram() ackAction=AckAction_AesAck, wakeup=None
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: _txState = TxState_Idle
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: AES solution accepted
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: MacController::OnDownstreamFrame(#255 LLMAC TX @ 1064ms [10k,NoCCA] AB 80 02 25 2A 41 46 6B 1F 00 E7 17 88 5C)
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: AutoTx: #AB[Ren] 252A41->466B1F Ack: 00 E7 17 88 5C
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: C<: #153 LLMAC TX @ 1064ms [10k,NoCCA] AB 80 02 25 2A 41 46 6B 1F 00 E7 17 88 5C
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: A<: #191 HmBidcos RxTelegram Auth[0] #AB[BiDi|BC|Ren|WMup] 466B1F->252A41 Info: 06 01 00 00
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: C< @3458381: bin:FD 00 14 03 99 06 04 28 80 AB 80 02 25 2A 41 46 6B 1F 00 E7 17 88 5C 5F E1
Nov 13 13:49:53 ccu3-webui user.debug rfd: RX for NEQ0062806: @220134573 AES(0) RSSI=-60dB 0x466B1F -> 0x252A41 INFO_ACTUATOR_STATUS [PEQ0626614]: CNT=43,RPTEN=1,RPTED=0,BIDI=1,BURST=0,WAKEUP=0,WAKEMEUP=1,BCAST=1,TYPE=0x10 CHANNEL = 1 STATUS = 0 STATE = 0 CLOCK = 0 LOWBAT = 0 DUTY_CYCLE = 0 RSSI = 0
Nov 13 13:49:53 ccu3-webui user.debug rfd: Event: NEQ0062806:1.STATE=false
Nov 13 13:49:53 ccu3-webui user.debug rfd: Event: NEQ0062806:1.ERROR=0
Nov 13 13:49:53 ccu3-webui user.debug rfd: HSSXmlRpcEventDispatcher::Handle send 1 events
Nov 13 13:49:53 ccu3-webui user.debug rfd: HSSXmlRpcEventDispatcher::Handle send 1 events
Nov 13 13:49:53 ccu3-webui user.debug rfd: Event: NEQ0062806:1.LOWBAT=false
Nov 13 13:49:53 ccu3-webui user.debug rfd: HSSXmlRpcEventDispatcher::Handle send 3 events
Nov 13 13:49:53 ccu3-webui user.debug rfd: HSSXmlRpcEventDispatcher::Handle send completed
Nov 13 13:49:53 ccu3-webui user.debug rfd: HSSXmlRpcEventDispatcher::Handle send completed
Nov 13 13:49:53 ccu3-webui user.debug rfd: HSSXmlRpcEventDispatcher::Handle send 2 events
Nov 13 13:49:53 ccu3-webui user.debug rfd: HSSXmlRpcEventDispatcher::Handle send completed
Nov 13 13:49:53 ccu3-webui user.debug rfd: HSSXmlRpcEventDispatcher::Handle send completed
Nov 13 13:49:53 ccu3-webui user.debug rfd: HSSXmlRpcEventDispatcher::Handle send 2 events
Nov 13 13:49:53 ccu3-webui user.debug rfd: HSSXmlRpcEventDispatcher::Handle send completed
Nov 13 13:49:53 ccu3-webui user.debug dސ~^B: C> @3458495: #153 LLMAC Response ACK @1064: 04 28
^Cpi@pi_piVCCU:~ $
Code: Alles auswählen
sudo pivccattach cat /var/hm_mode
HM_HMIP_ADDRESS=''
HM_HMIP_DEV='RPI-RF-MOD'
HM_HMIP_DEVNODE='/dev/raw-uart'
HM_HMIP_SERIAL='58A992F7B6'
HM_HMIP_SGTIN='3014F711A0001F58A992F7B6'
HM_HMIP_VERSION='3.4.8'
HM_HMRF_ADDRESS=''
HM_HMRF_DEV='RPI-RF-MOD'
HM_HMRF_DEVNODE='/dev/raw-uart'
HM_HMRF_SERIAL='58A992F7B6'
HM_HMRF_VERSION='3.4.8'
HM_HOST='rpi3'
HM_HOST_GPIO_RESET=''
HM_HOST_GPIO_UART='/dev/raw-uart'
HM_LED_GREEN=''
HM_LED_RED=''
HM_LED_YELLOW=''
HM_MODE='NORMAL'
HM_RTC=''
piVCCU3/iobroker mit einigen Aktoren, Sensoren, Empfängern und Sendern.
-
deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: Erstes piVCCU3 Stable Release
Hi,
mach mal einen Neustart und für dann folgende Befehle aus:
EDIT: Hat sich erledigt, nachdem du die Logs nachgereicht hast
Viele Grüße
Alex
mach mal einen Neustart und für dann folgende Befehle aus:
Code: Alles auswählen
sudo pivccu-info
sudo pivccu-attach cat /var/hm_mode
sudo pivccu-attach cat /var/log/messages
sudo pivccu-attach cat /var/log/hmserver.log
Viele Grüße
Alex
-
deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: Erstes piVCCU3 Stable Release
Hi,
stell mal bitte das Loglevel auf Info, mach einen Neustart und poste die Logs dann nochmal neu.
Viele Grüße
Alex
stell mal bitte das Loglevel auf Info, mach einen Neustart und poste die Logs dann nochmal neu.
Viele Grüße
Alex
-
deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: Erstes piVCCU3 Stable Release
Hi,
Neustart piVCCU mit "sudo systemctl restart pivccu" reicht. Neustart über Weboberfläche nicht.
Viele Grüße
Alex
Neustart piVCCU mit "sudo systemctl restart pivccu" reicht. Neustart über Weboberfläche nicht.
Viele Grüße
Alex
-
wendy2702
- Beiträge: 463
- Registriert: 05.03.2014, 19:31
- Hat sich bedankt: 1 Mal
- Danksagung erhalten: 1 Mal
Re: Erstes piVCCU3 Stable Release
Hier die logs:
Hoffe das mit den Logs passt so.
Bin gerade etwas verwundert wo das denn noch herkommen kann:
EDIT: Komisch, die hatte ich unter CCU2 mal gelöscht. Keine Ahnung warum die wieder im Backup sind und unter Geräte vorhanden.
OK. Der Fehler scheint nicht mehr zu kommen. Zumindest kann ich jetzt auch die Einstellungen öffnen.
Aber ich kann die HUE Devices nicht löschen, oder besser gesagt 2 von den dreien lassen sich nicht löschen.
Kann mich erinnern das es bei CCU2 ein Script dafür gab. Ist das noch verwendbar oder wie bekomme ich die weg?
Code: Alles auswählen
sudo pivccu-attach cat /var/hm_mode
HM_HMIP_ADDRESS=''
HM_HMIP_DEV='RPI-RF-MOD'
HM_HMIP_DEVNODE='/dev/raw-uart'
HM_HMIP_SERIAL='58A992F7B6'
HM_HMIP_SGTIN='3014F711A0001F58A992F7B6'
HM_HMIP_VERSION='3.4.8'
HM_HMRF_ADDRESS=''
HM_HMRF_DEV='RPI-RF-MOD'
HM_HMRF_DEVNODE='/dev/raw-uart'
HM_HMRF_SERIAL='58A992F7B6'
HM_HMRF_VERSION='3.4.8'
HM_HOST='rpi3'
HM_HOST_GPIO_RESET=''
HM_HOST_GPIO_UART='/dev/raw-uart'
HM_LED_GREEN=''
HM_LED_RED=''
HM_LED_YELLOW=''
HM_MODE='NORMAL'
HM_RTC=''
Code: Alles auswählen
sudo pivccu-attach cat /var/log/messages
Nov 13 14:08:37 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="MEQ0271718:0"."UNREACH"=true [iseXmlRpc.cpp:321]
Nov 13 14:08:37 ccu3-webui local0.info ReGaHss: Info: IseAlarmDP::WriteValue -> Alarm is not receipted until now! [iseDOMdpAlarm.cpp:295]
Nov 13 14:08:37 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="MEQ0271718:0"."STICKY_UNREACH"=true [iseXmlRpc.cpp:321]
Nov 13 14:08:37 ccu3-webui local0.info ReGaHss: Info: IseDOMPrg::SetState: Program ID = 25350 'Servicemeldungen all in one', rule's trigger flags = 6 [iseDOMPrg.cpp:515]
Nov 13 14:08:37 ccu3-webui local0.info ReGaHss: Info: SchedulerRT::Add: added script element - id= 25352; time= 1542114518 [iseRTScheduler.cpp:343]
Nov 13 14:08:37 ccu3-webui local0.info ReGaHss: Info: SchedulerRT::ThreadFunction(): wait for event ms= 1000 [iseRTScheduler.cpp:481]
Nov 13 14:08:37 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:37 ccu3-webui local0.info ReGaHss: Info: recvd 870 bytes by web server #2 [httpServer.cpp:764]
Nov 13 14:08:37 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@K34AZ2xp2H@&action=UpdateUI [iseSession.cpp:185]
Nov 13 14:08:37 ccu3-webui local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:38 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= CUxD for ID=1805 [iseXmlRpc.cpp:2549]
Nov 13 14:08:38 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =setValue params = {"CUX2801001:1","CMD_EXEC","logger -t script -p user.debug [ALCHY ALLINScript START]"} result = "" [iseXmlRpc.cpp:2610]
Nov 13 14:08:38 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:38 ccu3-webui user.info d▒▒~^B: No ACK received after 3 repetitions: #06[BiDi|Ren] 252A41->36D110 Configuration: 02 0E
Nov 13 14:08:38 ccu3-webui user.err rfd: RFPhysicalDataInterfaceCommand::GetData SendFrame failed for LEVEL_GET
Nov 13 14:08:38 ccu3-webui user.err rfd: HSSParameter::GetValue() id=VOLTAGE failed getting physical value.
Nov 13 14:08:38 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =setValue params = {"MEQ0271718:0","STICKY_UNREACH",false} result = "" [iseXmlRpc.cpp:2610]
Nov 13 14:08:38 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"MEQ0271718:2","VOLTAGE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Nov 13 14:08:38 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Nov 13 14:08:38 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Nov 13 14:08:38 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:38 ccu3-webui user.err rfd: RFPhysicalDataInterfaceCommand::GetData SendFrame failed for LEVEL_GET
Nov 13 14:08:38 ccu3-webui user.err rfd: HSSParameter::GetValue() id=FREQUENCY failed getting physical value.
Nov 13 14:08:38 ccu3-webui local0.info ReGaHss: Info: IseAlarmDP (OID=6565 Type:Alarm) changed to Receipted state! [iseDOMdpAlarm.cpp:226]
Nov 13 14:08:38 ccu3-webui local0.info ReGaHss: Info: IseDOMPrg::SetState: Program ID = 25350 'Servicemeldungen all in one', rule's trigger flags = 6 [iseDOMPrg.cpp:515]
Nov 13 14:08:40 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"MEQ0271718:2","FREQUENCY"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Nov 13 14:08:40 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Nov 13 14:08:40 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"MEQ0271718:3","DECISION_VALUE"} result = 0 [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"MEQ0271718:4","DECISION_VALUE"} result = 0 [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: SchedulerRT::Add: added script element - id= 25352; time= 1542114521 [iseRTScheduler.cpp:343]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"MEQ0271718:5","DECISION_VALUE"} result = 0 [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"MEQ0271718:6","DECISION_VALUE"} result = 0 [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"NEQ1112928:0","UNREACH"} result = false [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"NEQ1112928:0","STICKY_UNREACH"} result = false [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"NEQ1112928:0","CONFIG_PENDING"} result = false [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"NEQ1112928:0","LOWBAT"} result = false [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"NEQ1112928:0","RSSI_DEVICE"} result = -65535 [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui user.debug script: [ALCHY ALLINScript START]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"NEQ1112928:0","RSSI_PEER"} result = -65535 [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"NEQ1112928:1","STATE"} result = false [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"NEQ1112928:1","ERROR"} result = 0 [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =getValue params = {"NEQ1112928:1","LOWBAT"} result = false [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= CUxD for ID=1805 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =setValue params = {"CUX2801001:1","CMD_EXEC","/etc/config/addons/email/email 01 'NEUE Servicemeldung\x0d\x0aW▒schetrockner : \x0d\x0ahat Kommunikationsfehler \x0d\x0aseit: 13.11.18 14:08 (13.11.18 14:08)\x0d\x0a\x0d\x0aWeihnachten : \x0d\x0ahat Kommunikationsfehler \x0d\x0aseit: 13.11.18 14:08 (13.11.18 14:08)\x0d\x0a\x0d\x0aUnbenutzt : \x0d\x0ahat Kommunikationsfehler \x0d\x0aseit: 13.11.18 14:08 (13.11.18 14:08)\x0d\x0a\x0d\x0a'"} result = "" [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= CUxD for ID=1805 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =setValue params = {"CUX2801001:2","CMD_EXEC","/usr/local/addons/cuxd/extra/curl -s -k -d token='amAiquWoE8mFcAnDvrkoEmtRmLBWqA' -d user='uSerAeaszaFty1GUKpRphtEFPsKsQJ' -d device='Mirko_Iphone' -d html='1' -d message='NEUE%20Servicemeldung\x0d\x0aW%C3%A4schetrockner%20:%20\x0d\x0ahat%20Kommunikationsfehler%20\x0d\x0aseit:%2013.11.18%2014:08%20(13.11.18%2014:08)\x0d\x0a\x0d\x0aWeihnachten%20:%20\x0d\x0ahat%20Kommunikationsfehler%20\x0d\x0aseit:%2013.11.18%2014:08%20(13.11.18%2014:08)\x0d\x0a\x0d\x0aUnbenutzt%20:%20\x0d\x0ahat%20Kommunikationsfehler%20\x0d\x0aseit:%2013.11.18%2014:08%20(13.11.18%2014:08)\x0d\x0a\x0d\x0a' -d priority='1' -d sound='siren' -d retry='30' -d expire='120' https://api.pushover.net/1/messages.json"} result = "" [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui daemon.info cuxd[714]: system(/etc/config/addons/email/email 01 'NEUE Servicemeldung^M W▒schetrockner : ^M hat Kommunikationsfehler ^M seit: 13.11.18 14:08 (13.11.18 14:08)^M ^M Weihnachten : ^M hat Kommunikationsfehler ^M seit: 13.11.18 14:08 (13.11.18 14:08)^M ^M Unbenutzt : ^M hat Kommunikationsfehler ^M seit: 13.11.18 14:08 (13.11.18 14:08)^M ^M ') exit(127) 0s
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= CUxD for ID=1805 [iseXmlRpc.cpp:2549]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =setValue params = {"CUX2801001:1","CMD_EXEC","logger -t script -p user.debug [ALCHY ALLINScript ENDE]"} result = "" [iseXmlRpc.cpp:2610]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: SchedulerRT::ThreadFunction(): wait for event ms= 1000 [iseRTScheduler.cpp:481]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: SchedulerRT::ThreadFunction(): wait for event ms= 1000 [iseRTScheduler.cpp:481]
Nov 13 14:08:40 ccu3-webui user.debug script: [ALCHY ALLINScript ENDE]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: recvd 1535 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /rega.exe [iseSession.cpp:185]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: recvd 1031 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /rega.exe [iseSession.cpp:185]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: recvd 398 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: recvd 1202 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /rega.exe [iseSession.cpp:185]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: recvd 870 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@K34AZ2xp2H@&action=UpdateUI [iseSession.cpp:185]
Nov 13 14:08:40 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= CUxD for ID=1805 [iseXmlRpc.cpp:2549]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =setValue params = {"CUX2801001:1","CMD_EXEC","logger -t script -p user.debug [ALCHY ALLINScript START]"} result = "" [iseXmlRpc.cpp:2610]
Nov 13 14:08:41 ccu3-webui user.debug script: [ALCHY ALLINScript START]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= CUxD for ID=1805 [iseXmlRpc.cpp:2549]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =setValue params = {"CUX2801001:1","CMD_EXEC","logger -t script -p user.debug [ALCHY ALLINScript ENDE]"} result = "" [iseXmlRpc.cpp:2610]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: SchedulerRT::ThreadFunction(): wait for event ms= 4294967295 [iseRTScheduler.cpp:481]
Nov 13 14:08:41 ccu3-webui user.debug script: [ALCHY ALLINScript ENDE]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: recvd 1202 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /rega.exe [iseSession.cpp:185]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: recvd 134 bytes by web server #2 [httpServer.cpp:764]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:41 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:43 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:43 ccu3-webui local0.info ReGaHss: Info: recvd 870 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:43 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@K34AZ2xp2H@&action=UpdateUI [iseSession.cpp:185]
Nov 13 14:08:43 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:45 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:45 ccu3-webui local0.info ReGaHss: Info: recvd 398 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:45 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Nov 13 14:08:45 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:46 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:46 ccu3-webui local0.info ReGaHss: Info: recvd 870 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:46 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@K34AZ2xp2H@&action=UpdateUI [iseSession.cpp:185]
Nov 13 14:08:46 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:48 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="MEQ1598171:1"."TEMPERATURE"=13.600000 [iseXmlRpc.cpp:321]
Nov 13 14:08:48 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="MEQ1598171:2"."TEMPERATURE"=13.800000 [iseXmlRpc.cpp:321]
Nov 13 14:08:48 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="MEQ1598171:3"."TEMPERATURE"=-0.200000 [iseXmlRpc.cpp:321]
Nov 13 14:08:48 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="MEQ1598171:4"."TEMPERATURE"=0.200000 [iseXmlRpc.cpp:321]
Nov 13 14:08:48 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="MEQ1598171:0"."LOWBAT"=false [iseXmlRpc.cpp:321]
Nov 13 14:08:48 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="MEQ1598171:1"."LOWBAT"=false [iseXmlRpc.cpp:321]
Nov 13 14:08:48 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="MEQ1598171:2"."LOWBAT"=false [iseXmlRpc.cpp:321]
Nov 13 14:08:48 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="MEQ1598171:3"."LOWBAT"=false [iseXmlRpc.cpp:321]
Nov 13 14:08:48 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="MEQ1598171:4"."LOWBAT"=false [iseXmlRpc.cpp:321]
Nov 13 14:08:48 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="MEQ1598171:5"."LOWBAT"=false [iseXmlRpc.cpp:321]
Nov 13 14:08:48 ccu3-webui user.warn d▒▒~^B: Bad cast: std::bad_cast
Nov 13 14:08:49 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:49 ccu3-webui local0.info ReGaHss: Info: recvd 870 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:49 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@K34AZ2xp2H@&action=UpdateUI [iseSession.cpp:185]
Nov 13 14:08:49 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:50 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="CENTRAL"."PONG"="hm-rpc.0" [iseXmlRpc.cpp:321]
Nov 13 14:08:50 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: PONG event identified. [iseXmlRpc.cpp:335]
Nov 13 14:08:50 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:50 ccu3-webui local0.info ReGaHss: Info: recvd 398 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:50 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Nov 13 14:08:50 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:52 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:52 ccu3-webui local0.info ReGaHss: Info: recvd 870 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:52 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@K34AZ2xp2H@&action=UpdateUI [iseSession.cpp:185]
Nov 13 14:08:52 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:53 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="LTK0130806:1"."TEMPERATURE"=22.400000 [iseXmlRpc.cpp:321]
Nov 13 14:08:53 ccu3-webui local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="LTK0130806:1"."HUMIDITY"=42 [iseXmlRpc.cpp:321]
Nov 13 14:08:55 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:55 ccu3-webui local0.info ReGaHss: Info: recvd 398 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:55 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Nov 13 14:08:55 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:55 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:55 ccu3-webui local0.info ReGaHss: Info: recvd 870 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:55 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@K34AZ2xp2H@&action=UpdateUI [iseSession.cpp:185]
Nov 13 14:08:55 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Nov 13 14:08:58 ccu3-webui local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Nov 13 14:08:58 ccu3-webui local0.info ReGaHss: Info: recvd 870 bytes by web server #1 [httpServer.cpp:764]
Nov 13 14:08:58 ccu3-webui local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@K34AZ2xp2H@&action=UpdateUI [iseSession.cpp:185]
Nov 13 14:08:58 ccu3-webui local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
pi@pi_piVCCU:~ $
Code: Alles auswählen
sudo pivccu-attach cat /var/log/hmserver.log
Nov 13 14:06:43 de.eq3.lib.util.dynamics.GenericFactory INFO [main] @GenericFactory
Nov 13 14:06:43 de.eq3.lib.util.dynamics.GenericFactory INFO [main] creating instance of HMServerConfiguration with no-arg constructor
Nov 13 14:06:48 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN [Thread-0] Invalid state parameter or subtype: Parameter ERROR_POWER_SHORT_CIRCUIT_BUS_1 subtype=default
Nov 13 14:06:51 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN [Thread-0] Invalid state parameter or subtype: Parameter ERROR_POWER_SHORT_CIRCUIT_BUS_2 subtype=default
Nov 13 14:06:51 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN [Thread-0] Invalid state parameter or subtype: Parameter ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_1 subtype=default
Nov 13 14:06:59 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN [Thread-0] Invalid state parameter or subtype: Parameter ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_2 subtype=default
Nov 13 14:06:59 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN [Thread-0] Invalid state parameter or subtype: Parameter ERROR_BUS_CONFIG_MISMATCH subtype=default
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [HMIPTRXWriterWorker] (1) *worker
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [KeyServerWorker] (1) *worker
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [KryoPersistenceWorker] (1) *worker
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [TransactionSubsystemHandler] (1) *worker
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [FirmwareLoaderFileSystem] (1) *worker
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LocalServerPersistentDataLoader] (1)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LocalServerAdapterInitialization] (1)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [BackendCommandHandler] (1)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [DeviceInclusionAcceptHandler] (1)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [CheckDeviceExistHandler] (1)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [IncomingHMIPFrameHandler] (1)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [DeviceBackgroundUpdateSubsystem] (1)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [DeviceInclusionDefaultConfigurationChanger] (1)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [CyclicSmokeDetectorAwakening] (1)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LocalServerFirmwareUpdateInitialization] (1)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyNotificationHandler] (1) *worker
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyAPIWorker] (1) *worker
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyBackendNotificationHandler] (3) *worker
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyBlindLevelCorrectionHandler] (1) *worker
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyInitializion] (1)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: deploying 20 classes to Vert.x
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: 20 VertxDeployers initialized
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of DeviceInclusionDefaultConfigurationChanger succeeded (3df879e1-fdc5-4a29-9360-bc9efa45963e)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of HMIPTRXWriterWorker succeeded (fdf9d10f-ab5c-4925-bc78-e737941ea20b)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-0] SYSTEM: start of CyclicSmokeDetectorAwakening succeeded (fab15262-2289-46a4-86ab-008e2a8d5fa8)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-0] SYSTEM: start of CheckDeviceExistHandler succeeded (0048c827-6810-49dd-8c63-bf894765acf7)
Nov 13 14:06:59 de.eq3.cbcs.server.core.vertx.KeyServerWorker ERROR [vert.x-worker-thread-0] Missing key server configuration parameter (Network.Key) for mode: KEYSERVER_LOCAL
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of LegacyBlindLevelCorrectionHandler succeeded (ca1799ce-5c0c-4ef9-9e50-8a0d73abf216)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-3] SYSTEM: start of TransactionSubsystemHandler succeeded (f13a27e4-24ae-4077-98a9-fe5f726ab928)
Nov 13 14:06:59 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of KeyServerWorker succeeded (73ecfe43-75dc-4802-a73f-1bf47aef8d29)
Nov 13 14:07:00 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of KryoPersistenceWorker succeeded (52a47c67-430f-4051-b51d-fec04321bc49)
Nov 13 14:07:00 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-7] SYSTEM: start of LocalServerPersistentDataLoader succeeded (4fc624cc-43a8-47f2-b94a-3d6c4caac026)
Nov 13 14:07:00 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of DeviceBackgroundUpdateSubsystem succeeded (7b6fa190-568c-4a11-b2a9-d3b747f56f50)
Nov 13 14:07:01 de.eq3.cbcs.server.core.otau.util.FirmwareLoaderFileSystem INFO [vert.x-worker-thread-0] SYSTEM: Firmware update directory is set to /etc/config/firmware
Nov 13 14:07:01 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of FirmwareLoaderFileSystem succeeded (4a317b3a-d19f-4bdb-bf18-30d9965b215a)
Nov 13 14:07:01 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of IncomingHMIPFrameHandler succeeded (f7eecf1b-dcf0-4a42-9a9a-bd120a8dc8bf)
Nov 13 14:07:01 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-5] SYSTEM: start of DeviceInclusionAcceptHandler succeeded (dc7d6778-4be3-4c73-90f9-7b6b4ca81342)
Nov 13 14:07:01 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-7] SYSTEM: start of LegacyNotificationHandler succeeded (f0377f1c-bbe9-4315-9613-72c51267376a)
Nov 13 14:07:01 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of BackendCommandHandler succeeded (6af096b4-50e9-461f-b4f5-e2841a2e34a1)
Nov 13 14:07:01 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-7] SYSTEM: start of LegacyBackendNotificationHandler succeeded (48511093-4824-403c-bae6-9c5671ff4582)
Nov 13 14:07:01 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of LegacyAPIWorker succeeded (2f6c9427-95f8-4d0c-8124-d18a7094892c)
Nov 13 14:07:06 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-3] SYSTEM ADVICE: pre-conditions for deployment of LegacyInitializion still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 14:07:06 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-0] SYSTEM ADVICE: pre-conditions for deployment of LocalServerFirmwareUpdateInitialization still not met - check deployment configuration (still unfulfilled: [connector.open])
Nov 13 14:07:07 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-5] SYSTEM: start of LocalServerAdapterInitialization succeeded (ccf0bea9-8280-44d9-b6b7-c4604f1cb5d5)
Nov 13 14:07:07 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] TRX adapter state 1: HMIP_TRX_App
Nov 13 14:07:07 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] TRX adapter application is already running or started
Nov 13 14:07:07 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] No NWK, try to set address ...
Nov 13 14:07:07 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Try to set radio address 11899696...
Nov 13 14:07:07 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Set max send attempts for 3014F711A0001F58A992F7B6 to 3
Nov 13 14:07:07 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Try to get application version...
Nov 13 14:07:07 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Application version 3.4.8
Nov 13 14:07:07 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Bootloader version 1.0.1
Nov 13 14:07:07 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] hmos version 1.34.0
Nov 13 14:07:08 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] MCU type: CC1310
Nov 13 14:07:08 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Duty Cycle: 1.0
Nov 13 14:07:08 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] set DutyCycle limit to ffffffc8
Nov 13 14:07:08 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Set Duty Cycle Limit
Nov 13 14:07:08 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Current Security Counter: 218322432
Nov 13 14:07:08 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Update security counter to calculation: 218331589
Nov 13 14:07:08 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] TRX adapter has no linkpartner
Nov 13 14:07:08 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Adapter with Access Point id 3014F711A0001F58A992F7B6 initialized
Nov 13 14:07:08 de.eq3.cbcs.server.local.base.internal.LocalServerAdapterInitialization INFO [Thread-6] HMIPTRXInitialResponseListener said that Adapter was initialized
Nov 13 14:07:08 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-0] SYSTEM: start of LegacyInitializion succeeded (d1da1dcd-9db3-4948-bb2a-9eec51c6450b)
Nov 13 14:07:08 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-3] SYSTEM: start of LocalServerFirmwareUpdateInitialization succeeded (5e1c7bc6-457a-45f9-8690-d9b6978f0e3a)
Nov 13 14:07:08 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-6] SYSTEM: Checking all devices on all accesspoints for updates
Nov 13 14:07:08 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-6] SYSTEM: There are 0 APs queued with updatable devices
Nov 13 14:07:08 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: initial deployment complete _____________________________________________________
Nov 13 14:07:09 de.eq3.cbcs.server.local.LocalServer INFO [Thread-0] SYSTEM: Bind XML-RPC api to port 2010
Nov 13 14:07:13 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Default MaxEventLoopExecuteTime: 2000000000
Nov 13 14:07:13 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Default BlockedThreadCheckInterval: 1000
Nov 13 14:07:13 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Default MaxWorkerExecuteTime: 60000000000
Nov 13 14:07:13 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Default EventLoopPoolSize: 8
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [BackendWorker] (1) *worker
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [GroupRequestWorker] (1) *worker
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [DiagramRequestWorker] (1) *worker
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [StorageRequestWorker] (1) *worker
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [DeviceFirmwareRequestWorker] (1) *worker
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [EnergyPriceRequestWorker] (1) *worker
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [CouplingRequestWorker] (1) *worker
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [RegaClientWorker] (1) *worker
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [GroupConfigurationPersistenceFileSystem] (1) *worker
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: added for deployment [HmIPGatewayManagementRequestWorker] (1) *worker
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: deploying 10 classes to Vert.x
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: 10 VertxDeployers initialized
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of BackendWorker succeeded (8f14b850-adac-409c-89f3-4f48bf51db78)
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of GroupConfigurationPersistenceFileSystem succeeded (7290bb65-8180-4aaa-b68c-57add13dae94)
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-0] SYSTEM: start of EnergyPriceRequestWorker succeeded (095ea05e-ea98-4e01-93e2-f2b7fbc6a8a8)
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of CouplingRequestWorker succeeded (3bc3b091-5401-4cb9-9404-78bd5d57bc7f)
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of RegaClientWorker succeeded (ac651307-f230-4657-96a6-82920b4a61eb)
Nov 13 14:07:13 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of StorageRequestWorker succeeded (756afc0b-3562-42a3-b9ca-61a7a0a59348)
Nov 13 14:07:14 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-5] SYSTEM: start of GroupRequestWorker succeeded (c252a858-a631-43ab-a9dd-9796873d308e)
Nov 13 14:07:14 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of DiagramRequestWorker succeeded (044546e8-5578-41eb-821c-1ca028c94929)
Nov 13 14:07:14 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-3] SYSTEM: start of DeviceFirmwareRequestWorker succeeded (1209263c-899e-411f-9363-d81f73bc0b41)
Nov 13 14:07:14 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of HmIPGatewayManagementRequestWorker succeeded (08bb7a31-ce45-42ae-9986-b58b810e96e0)
Nov 13 14:07:14 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-2] SYSTEM: initial deployment complete _____________________________________________________
Nov 13 14:07:14 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Starting HMServer at 127.0.0.1:9292
Nov 13 14:07:14 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Read Configuration
Nov 13 14:07:14 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create Bidcos Dispatcher
Nov 13 14:07:14 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] InitBidCosCache
Nov 13 14:07:15 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create groupDefinitionProvider
Nov 13 14:07:16 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create VirtualDeviceHolder
Nov 13 14:07:16 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create VirtualDeviceHandlerRega
Nov 13 14:07:16 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create GroupAdministrationService
Nov 13 14:07:16 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create GroupDeviceDispatcher
Nov 13 14:07:16 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create GroupDeviceHandler
Nov 13 14:07:16 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO [Thread-2] @GroupDeviceHandler - initializing...
Nov 13 14:07:16 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO [Thread-2] --> created groupDeviceDispatcher (GroupDeviceService to BidCoS (via Dispatcher))
Nov 13 14:07:16 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO [Thread-2] --> created virtualDeviceHandler (GroupDeviceService to ReGa)
Nov 13 14:07:16 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO [Thread-2] --> got groupDefinitionProvider
Nov 13 14:07:16 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create BidCosGroupMemberProvider
Nov 13 14:07:16 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Init groupAdministrationService
Nov 13 14:07:16 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Init Virtual OS Device
Nov 13 14:07:16 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Init ESHLight Bridge
Nov 13 14:07:30 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create RrdDatalogging
Nov 13 14:07:30 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create MeasurementService
Nov 13 14:07:30 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Init MeasurementService
Nov 13 14:07:30 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create HTTP Server
Nov 13 14:07:30 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create BidCos context and start handler
Nov 13 14:07:30 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Create group context and start handler
Nov 13 14:07:30 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-0] (un)registerCallback on LegacyServiceHandler called from url: http://127.0.0.1:9292/bidcos
Nov 13 14:07:30 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-0] init finished
Nov 13 14:07:30 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO [vert.x-worker-thread-2] Added InterfaceId: HmIP-RF_java
Nov 13 14:07:31 de.eq3.ccu.server.BaseHMServer INFO [Thread-2] Starting HMServer done
Nov 13 14:07:50 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-3] (un)registerCallback on VirtualDeviceHandlerRega called from url: xmlrpc_bin://127.0.0.1:1999
Nov 13 14:07:50 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-3] Added InterfaceId: 1236
Nov 13 14:07:50 de.eq3.ccu.virtualdevice.service.internal.rega.BackendWorker INFO [vert.x-worker-thread-11] Execute BackendCommand: de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand
Nov 13 14:07:50 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO [vert.x-worker-thread-11] updateDevicesForClient -> 9 device addresses will be added
Nov 13 14:08:00 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-1] (un)registerCallback on LegacyServiceHandler called from url: xmlrpc_bin://127.0.0.1:1999
Nov 13 14:08:00 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-1] init finished
Nov 13 14:08:00 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO [vert.x-worker-thread-0] Added InterfaceId: 15833
Nov 13 14:08:00 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO [vert.x-worker-thread-11] set ready config of HU-Hue iris 1
Nov 13 14:08:00 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO [vert.x-worker-thread-11] set ready config of HU-Extended co
Nov 13 14:08:00 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO [vert.x-worker-thread-11] set ready config of HU-Hue white l
pi@pi_piVCCU:~ $
Bin gerade etwas verwundert wo das denn noch herkommen kann:
EDIT: Komisch, die hatte ich unter CCU2 mal gelöscht. Keine Ahnung warum die wieder im Backup sind und unter Geräte vorhanden.
Code: Alles auswählen
Nov 13 14:08:00 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO [vert.x-worker-thread-11] set ready config of HU-Hue iris 1
Nov 13 14:08:00 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO [vert.x-worker-thread-11] set ready config of HU-Extended co
Nov 13 14:08:00 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO [vert.x-worker-thread-11] set ready config of HU-Hue white l
Aber ich kann die HUE Devices nicht löschen, oder besser gesagt 2 von den dreien lassen sich nicht löschen.
Kann mich erinnern das es bei CCU2 ein Script dafür gab. Ist das noch verwendbar oder wie bekomme ich die weg?
Zuletzt geändert von wendy2702 am 13.11.2018, 14:18, insgesamt 1-mal geändert.
piVCCU3/iobroker mit einigen Aktoren, Sensoren, Empfängern und Sendern.