Problem bei der Umstellung von CCU2 auf pivccu
Moderator: Co-Administratoren
Re: Problem bei der Umstellung von CCU2 auf pivccu
Also Änderungen habe ich nur an im IOBroker gemacht auf der Homematic Seite garkeine dann versuche ich es nocheinmal mit einem Restore. Ich habe auch nur 3 IP Geräte. Muss ich bevor ich das Backup erneut einspiele noch etwas beachten?
Re: Problem bei der Umstellung von CCU2 auf pivccu
Ich habe gerad einmal nachgesehen an rpc-0 und rpc-1 werden mir die IP Geräte wie vorher gezeigt
- deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: Problem bei der Umstellung von CCU2 auf pivccu
Hi,
Backup einfach einspielen (bevor Mißverständnisse aufkommen: nur in der CCU).
Das du Geräte siehst, bringt dich nicht weiter. Du wirst sie nicht steuern können, weil du die Schlüssel für die Kommunikation gelöscht hast.
Viele Grüße
Alex
Backup einfach einspielen (bevor Mißverständnisse aufkommen: nur in der CCU).
Das du Geräte siehst, bringt dich nicht weiter. Du wirst sie nicht steuern können, weil du die Schlüssel für die Kommunikation gelöscht hast.
Viele Grüße
Alex
Re: Problem bei der Umstellung von CCU2 auf pivccu
Also das Backup auf die CCU2 einspielen? Und natürlich den Pi solange wieder vom Netz nehmen? Ich mache das alles das erste mal deshalb so dumme Fragen.
- deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: Problem bei der Umstellung von CCU2 auf pivccu
Hi,
nein, das CCU Backup im CCU Teil vom Raspi einspielen und den ioBroker Teil in Ruhe lassen.
Viele Grüße
Alex
nein, das CCU Backup im CCU Teil vom Raspi einspielen und den ioBroker Teil in Ruhe lassen.
Viele Grüße
Alex
Re: Problem bei der Umstellung von CCU2 auf pivccu
Ah super verstanden, werde ich sofort durchführen.
Danke Peter
Danke Peter
Re: Problem bei der Umstellung von CCU2 auf pivccu
Ich hatte noch ein Backup vom pivccu vom 11.11. Das spiele ich gerade ein. Im Moment ist die CCU noch nicht bereit, das dauert immer Ellenlang.
Re: Problem bei der Umstellung von CCU2 auf pivccu
Code: Alles auswählen
pi@All-In-One_RasPi:~ $ sudo ls -la /var/lib/piVCCU/userfs/etc/config/crRFD/data/*
-rw-r--r-- 1 root root 131 Nov 11 07:52 /var/lib/piVCCU/userfs/etc/config/crRFD/data/3014F711A00003522998D4CA.ap
-rw-r--r-- 1 root root 209 Mär 16 2016 /var/lib/piVCCU/userfs/etc/config/crRFD/data/3014F711A00003522998D4CA.apkx
-rw-r--r-- 1 root root 21709 Nov 11 07:52 /var/lib/piVCCU/userfs/etc/config/crRFD/data/3014F711A0000858A98F418C.dev
-rw-r--r-- 1 root root 20555 Nov 11 07:52 /var/lib/piVCCU/userfs/etc/config/crRFD/data/3014F711A0000858A99194D9.dev
-rw-r--r-- 1 root root 1277 Nov 11 07:52 /var/lib/piVCCU/userfs/etc/config/crRFD/data/3014F711A0000C5709AE78B1.dev
-rw-r--r-- 1 root root 15 Aug 26 11:10 /var/lib/piVCCU/userfs/etc/config/crRFD/data/linkData.conf
pi@All-In-One_RasPi:~ $
- deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: Problem bei der Umstellung von CCU2 auf pivccu
Hi,
hmm. ok. Das sieht eigentlich gut aus.
Was kommt bei
Viele Grüße
Alex
hmm. ok. Das sieht eigentlich gut aus.
Was kommt bei
Code: Alles auswählen
sudo ls -la /var/lib/piVCCU/userfs/etc/config
Alex
Re: Problem bei der Umstellung von CCU2 auf pivccu
folgendes
Code: Alles auswählen
pi@All-In-One_RasPi:/ $ sudo ls -la /var/lib/piVCCU/userfs/etc/config
insgesamt 8448
drwxrwxr-x 11 root root 4096 Nov 15 16:55 .
drwxr-xr-x 3 root root 4096 Nov 15 16:54 ..
drwxr-xr-x 5 root root 4096 Nov 15 16:54 addons
drwxr-xr-x 3 root root 4096 Nov 15 16:54 crRFD
-rw-r--r-- 1 root root 0 Apr 4 2015 crypttool.cfg
-rw-r--r-- 1 root root 108 Feb 20 2017 energyPrice
drwxr-xr-x 3 root root 4096 Nov 15 16:54 eshlight
-rw-r--r-- 1 root root 324 Mär 16 2017 firewall.conf
drwxr-xr-x 3 root root 4096 Nov 15 16:54 firmware
-rw-r--r-- 1 root root 1050 Dez 21 2017 hm_addons.cfg
-rw-r--r-- 1 root root 78 Mär 16 2016 hmip_address.conf
-rw-r--r-- 1 root root 4268674 Nov 11 20:09 homematic.regadom
-rw-r--r-- 1 root root 4268747 Nov 11 19:16 homematic.regadom.bak
drwxr-xr-x 2 root root 4096 Jan 1 1970 hs485d
-rw-r--r-- 1 root root 26 Jan 1 1970 ids
-rwxr-xr-x 1 root root 516 Nov 15 16:54 InterfacesList.xml
-rw-r--r-- 1 root root 1220 Apr 4 2015 log4j.xml
drwxr-xr-x 2 root root 4096 Nov 15 16:54 measurement
-rw-r--r-- 1 root root 402 Mär 16 2016 multimacd.conf
-rw-r--r-- 1 root root 302 Nov 15 16:54 netconfig
-rw-r--r-- 1 root root 27 Sep 9 23:30 ntpclient
drwxr-xr-x 2 root root 4096 Nov 15 16:54 rc.d
drwxr-xr-x 2 root root 4096 Nov 15 16:54 rfd
-rw-r--r-- 1 root root 635 Nov 15 16:55 rfd.conf
-rw------- 1 root root 381 Mai 10 2016 shadow
-rw-r--r-- 1 root root 0 Mai 10 2016 sshEnabled
-rw-r--r-- 1 root root 66 Jan 1 1970 syslog
-rw-r--r-- 1 root root 85 Dez 28 2017 time.conf
-rw-r--r-- 1 root root 45 Dez 28 2017 TZ
-rw-r--r-- 1 root root 0 Okt 27 2017 userAckSecurityHint
drwxr-xr-x 3 root root 4096 Nov 15 16:54 userprofiles
pi@All-In-One_RasPi:/ $