HomeMatic RS485 Gateway zeigt keinen Status

Virtualisierte CCU für Raspberry Pi und Clones

Moderator: Co-Administratoren

Antworten
Grumbler
Beiträge: 2
Registriert: 23.10.2018, 09:49

HomeMatic RS485 Gateway zeigt keinen Status

Beitrag von Grumbler » 23.10.2018, 11:18

Hallo allerseits,

ich betreibe erfolgreich einen OpenhabianPi (Raspberry Pi 3 Model B Rev 1.2, Linux 4.14.71-v7+) mit aufgestecktem RPI-RF-MOD. Genutzt wird das pivccu3 image in der Version 3.37.8.

Im Moment versuche ich ein Homematic-Wired Lan-Gateway (HMW-LGW-O-DR-GS-EU) und einige HomeMatic-Wired RS485 Rollladenaktoren (HMW-LC-Bl1-DR) in Betrieb zu nehmen. Die Komponenten sind an ein 24 V Mean Well-Hutschienennetzteil gemäß Schaltplan angeschlossen (Schirm jeweils einseitig auf Masse gelegt).

Ich nutze diverse RF-Komponenten problemlos und habe gestern das Lan-Gateway über Einstellungen->Systemsteuerung->LAN Gateway Konfiguration hinzugefügt. Ich habe die entsprechende IP-Adresse und den Sicherheitsschlüssel (Aufkleber auf Lan-Gateway) eingetragen, übernommen und sowohl die Homematic als auch die Hardware selbst mehrfach neu gestartet (stromlos):
2018-10-23_10h26_53.png
2018-10-23_10h26_53.png (22.83 KiB) 1020 mal betrachtet

Das Lan-Gateway wird auch mit dem Homematic-NetFinder erfolgreich gefunden:
2018-10-23_10h30_10.png
2018-10-23_10h30_10.png (10.73 KiB) 1020 mal betrachtet

Entsprechend diverser Forenbeiträge habe ich versucht den Lan-Gateway sowohl per DHCP (wird gefunden) als auch mit statischer IP (wird auch gefunden) zu betreiben.

Leider verbleibt das Status-Feld in jedem Betriebsmodus leer (weder "verbunden" noch "nicht verbunden"):
2018-10-23_10h35_06.png
2018-10-23_10h35_06.png (4.4 KiB) 1020 mal betrachtet

Ich habe daraufhin das LOGLEVEL_HS485D (/var/lib/piVCCU3/userfs/etc/config/syslog) auf 0 gestellt um möglichst viel Information zu sammeln.

Wenn ich das Gerät z. B. über den NetFinder erfolgreich neu starte, so kann ich im syslog erkennen, dass das Lan-Gateway kurz nicht erreichbar ist (erwartungskonform) und dann wieder erreichbar wird.

Code: Alles auswählen

Oct 23 10:40:00 ccu3-webui user.err hs485d: LanConnection::perror(): recv error
Oct 23 10:40:01 ccu3-webui user.err hs485d: response timeout
Oct 23 10:40:01 ccu3-webui user.err hs485d: HS485ControllerLGW::keepAliveMsgThreadFunction(): Did not get an answer
Oct 23 10:40:03 ccu3-webui user.crit hs485d: LGWPortWrapper::connect(): Reconnected.
Weiterhin finde ich beim Start folgende (für mich positive) Einträge zum Lan-Gateway:

Code: Alles auswählen

Oct 22 14:14:47 ccu3-webui user.info root: Updating Wired Lan Gateway Firmware
Oct 22 14:14:47 ccu3-webui user.info update-lgw-firmware: LAN Gateway Firmware Update...
Oct 22 14:14:47 ccu3-webui user.info update-lgw-firmware: Gateway PEQ0170186
Oct 22 14:14:49 ccu3-webui user.info update-lgw-firmware: Gateway type is eQ3-HMW-LGW-App
Oct 22 14:14:49 ccu3-webui user.info update-lgw-firmware: Available Firmware Version:   1.0.5
Oct 22 14:14:49 ccu3-webui user.info update-lgw-firmware: Lan Gateway Firmware Version: 1.0.5
Oct 22 14:14:49 ccu3-webui user.info update-lgw-firmware: Firmware is up to date
Oct 22 14:14:49 ccu3-webui user.info hs485d: Using configuration file: /etc/config/hs485d.conf
Oct 22 14:14:49 ccu3-webui user.info hs485d: Lan Device Information: Protocol-Version: 1 Product-ID: eQ3-HMW-LGW Firmware-Version: 1.0.5 Serial Number: PEQ0170186
Dann erhalte ich jedoch folgende Fehler:

Code: Alles auswählen

Oct 22 14:14:49 ccu3-webui user.err hs485d: XmlRpc transport error calling system.listMethods({"BidCos-Wired_java"}) on http://127.0.0.1:9292/bidcos:
Oct 22 14:14:49 ccu3-webui user.err hs485d: XmlRpc transport error calling system.listMethods({"2084"}) on binary://127.0.0.1:1999/RPC2:
Allerdings erhalte ich eine ähnliche Nachricht auch für die BidCos-RF wobei ich mit RF-Komponenten keinerlei Probleme habe (allerdings alle aus CCU1-Export importiert):

Code: Alles auswählen

Oct 22 14:14:53 ccu3-webui user.err rfd: XmlRpc transport error calling system.listMethods({"BidCos-RF_java"}) on http://127.0.0.1:9292/bidcos:
Oct 22 14:14:53 ccu3-webui user.err rfd: XmlRpc transport error calling system.listMethods({"1007"}) on binary://127.0.0.1:1999/RPC2:
Im hmserver.log konnte ich noch folgenden Eintrag finden, der nach Wired klingt:

Code: Alles auswählen

Oct 22 13:13:47 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_POWER_SHORT_CIRCUIT_BUS_1 subtype=default 
Oct 22 13:13:47 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_POWER_SHORT_CIRCUIT_BUS_2 subtype=default 
Oct 22 13:13:47 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_1 subtype=default 
Oct 22 13:13:47 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_2 subtype=default 
Oct 22 13:13:47 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_BUS_CONFIG_MISMATCH subtype=default
Anbei messages nach Neustart:

Code: Alles auswählen

Oct 23 10:57:15 ccu3-webui syslog.info syslogd started: BusyBox v1.28.4
Oct 23 10:57:15 ccu3-webui user.notice kernel: klogd started: BusyBox v1.28.4 (2018-08-29 11:23:30 CEST)
Oct 23 10:57:15 ccu3-webui daemon.err udhcpc[161]: started, v1.28.4
Oct 23 10:57:15 ccu3-webui daemon.err udhcpc[161]: sending discover
Oct 23 10:57:16 ccu3-webui daemon.err udhcpc[161]: sending select for 192.168.178.44
Oct 23 10:57:16 ccu3-webui daemon.err udhcpc[161]: lease of 192.168.178.44 obtained, lease time 864000
Oct 23 10:57:16 ccu3-webui user.info firewall: 'modprobe: FATAL: Module ip6_tables not found in directory /lib/modules/4.14.71-v7+ ip6tables v1.6.2: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?) Perhaps ip6tables or your kernel needs to be upgraded.'
Oct 23 10:57:16 ccu3-webui daemon.info ifplugd(eth0)[209]: ifplugd 0.28 initializing.
Oct 23 10:57:16 ccu3-webui daemon.info ifplugd(eth0)[209]: Using interface eth0/0A:AE:46:3A:FB:CF with driver <veth> (version: 1.0)
Oct 23 10:57:16 ccu3-webui daemon.info ifplugd(eth0)[209]: Using detection mode: SIOCETHTOOL
Oct 23 10:57:16 ccu3-webui daemon.info ifplugd(eth0)[209]: Initialization complete, link beat detected.
Oct 23 10:57:16 ccu3-webui daemon.warn ifplugd(eth0)[209]: Could not open /dev/tty, cannot beep.
Oct 23 10:57:16 ccu3-webui daemon.info ifplugd(eth0)[209]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Oct 23 10:57:17 ccu3-webui daemon.warn ifplugd(eth0)[209]: client: ifup: interface eth0 already configured
Oct 23 10:57:17 ccu3-webui daemon.info ifplugd(eth0)[209]: Program executed successfully.
Oct 23 10:57:23 ccu3-webui daemon.notice ntpdate[214]: step time server 81.14.202.21 offset 0.001768 sec
Oct 23 10:57:23 ccu3-webui daemon.notice ntpd[215]: ntpd 4.2.8p11@1.3728-o Wed Aug 29 10:08:05 UTC 2018 (1): Starting
Oct 23 10:57:23 ccu3-webui daemon.info ntpd[215]: Command line: /usr/sbin/ntpd -g ntp.homematic.com
Oct 23 10:57:23 ccu3-webui daemon.info ntpd[217]: proto: precision = 0.989 usec (-20)
Oct 23 10:57:23 ccu3-webui daemon.info ntpd[217]: Listen and drop on 0 v6wildcard [::]:123
Oct 23 10:57:23 ccu3-webui daemon.info ntpd[217]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Oct 23 10:57:23 ccu3-webui daemon.info ntpd[217]: Listen normally on 2 lo 127.0.0.1:123
Oct 23 10:57:23 ccu3-webui daemon.info ntpd[217]: Listen normally on 3 eth0 192.168.178.44:123
Oct 23 10:57:23 ccu3-webui daemon.info ntpd[217]: Listen normally on 4 lo [::1]:123
Oct 23 10:57:23 ccu3-webui daemon.info ntpd[217]: Listening on routing socket on fd #21 for interface updates
Oct 23 10:57:23 ccu3-webui daemon.err xinetd[234]: Unable to read included directory: /etc/config/xinetd.d [file=/etc/xinetd.conf] [line=14]
Oct 23 10:57:23 ccu3-webui daemon.crit xinetd[234]: 234 {init_services} no services. Exiting...
Oct 23 10:57:23 ccu3-webui user.info root: Updating RF Lan Gateway Coprocessor Firmware
Oct 23 10:57:23 ccu3-webui user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Oct 23 10:57:23 ccu3-webui user.info root: Updating RF Lan Gateway Firmware
Oct 23 10:57:23 ccu3-webui user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Oct 23 10:57:23 ccu3-webui user.info root: Updating Wired Lan Gateway Firmware
Oct 23 10:57:23 ccu3-webui user.info update-lgw-firmware: LAN Gateway Firmware Update...
Oct 23 10:57:23 ccu3-webui user.info update-lgw-firmware: Gateway PEQ0170186
Oct 23 10:57:25 ccu3-webui user.info update-lgw-firmware: Gateway type is eQ3-HMW-LGW-App
Oct 23 10:57:25 ccu3-webui user.info update-lgw-firmware: Available Firmware Version:   1.0.5
Oct 23 10:57:25 ccu3-webui user.info update-lgw-firmware: Lan Gateway Firmware Version: 1.0.5
Oct 23 10:57:25 ccu3-webui user.info update-lgw-firmware: Firmware is up to date
Oct 23 10:57:25 ccu3-webui daemon.info snmpd[297]: Turning on AgentX master support.
Oct 23 10:57:25 ccu3-webui daemon.info snmpd[299]: NET-SNMP version 5.7.3
Oct 23 10:57:25 ccu3-webui user.info dÎè~^B: Copro application running.
Oct 23 10:57:25 ccu3-webui user.info kernel: [87939.954060] eq3loop: created slave mmd_hmip
Oct 23 10:57:25 ccu3-webui user.info kernel: [87939.954462] eq3loop: created slave mmd_bidcos
Oct 23 10:57:25 ccu3-webui user.info dÎè~^B: Vapp=030408 Vbl=010001 Vhmos=012200
Oct 23 10:57:25 ccu3-webui user.info dÎè~^B: SGTIN=30 14 F7 11 A0 00 1F 58 A9 93 01 4E
Oct 23 10:57:25 ccu3-webui user.info dÎè~^B: RF address=65535
Oct 23 10:57:25 ccu3-webui user.info dÎè~^B: Serial Number=PEQ0629070
Oct 23 10:57:25 ccu3-webui user.info dÎè~^B: Timer=10545
Oct 23 10:57:25 ccu3-webui user.err hs485d: XmlRpc transport error calling system.listMethods({"BidCos-Wired_java"}) on http://127.0.0.1:9292/bidcos:
Oct 23 10:57:25 ccu3-webui user.err hs485d: XmlRpc transport error calling system.listMethods({"2084"}) on binary://127.0.0.1:1999/RPC2:
Oct 23 10:57:27 ccu3-webui user.info rfd: BidCoS-Service started
Oct 23 10:57:27 ccu3-webui user.info rfd: XmlRpc Server is listening on TCP port 2001
Oct 23 10:57:27 ccu3-webui user.warn rfd: opendir(/etc/config/firmware//) failed
Oct 23 10:57:27 ccu3-webui user.info rfd: CCU2CommController::init(): Coprocessor Bootloader Version is: 1.0.1
Oct 23 10:57:27 ccu3-webui user.info rfd: CCU2CommController::init(): Coprocessor Firmware Version is: 3.4.8
Oct 23 10:57:27 ccu3-webui user.info rfd: () CCU2CommController::setCSMACAEnabled(): CSMA/CA disabled.
Oct 23 10:57:27 ccu3-webui user.info rfd: Current AES key=0, previous AES key=0
Oct 23 10:57:30 ccu3-webui user.info rfd: RF-ccu support system.multicall
Oct 23 10:57:30 ccu3-webui user.info rfd: RF-ccu support event
Oct 23 10:57:30 ccu3-webui user.info rfd: RF-ccu support deleteDevices
Oct 23 10:57:30 ccu3-webui user.info rfd: RF-ccu support newDevices
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpc transport error calling system.listMethods({"BidCos-RF_java"}) on http://127.0.0.1:9292/bidcos:
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpc transport error calling system.listMethods({"1007"}) on binary://127.0.0.1:1999/RPC2:
Oct 23 10:57:30 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF_java","OEQ0987184:2","ACTUAL_TEMPERATURE",19.000000}]}) on http://127.0.0.1:9292/bidcos:
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:30 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:30 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","OEQ0987184:2","ACTUAL_TEMPERATURE",19.000000}]}) on binary://127.0.0.1:1999/RPC2:
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF_java","OEQ0987184:2","ACTUAL_HUMIDITY",63.000000}],[methodName:"event",params:{"BidCos-RF_java","OEQ0987184:2","SET_TEMPERATURE",17.000000}]}) on http://127.0.0.1:9292/bidcos:
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:30 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","OEQ0987184:2","ACTUAL_HUMIDITY",63.000000}],[methodName:"event",params:{"1007","OEQ0987184:2","SET_TEMPERATURE",17.000000}]}) on binary://127.0.0.1:1999/RPC2:
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:30 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:30 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","KEQ0080884:1","TEMPERATURE",17.000000}]}) on binary://127.0.0.1:1999/RPC2:
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF_java","KEQ0080884:1","TEMPERATURE",17.000000}]}) on http://127.0.0.1:9292/bidcos:
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:30 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:30 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF_java","KEQ0080884:1","HUMIDITY",70}]}) on http://127.0.0.1:9292/bidcos:
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","KEQ0080884:1","HUMIDITY",70}]}) on binary://127.0.0.1:1999/RPC2:
Oct 23 10:57:30 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:37 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:37 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF_java","CENTRAL","PONG","ccu"}]}) on http://127.0.0.1:9292/bidcos:
Oct 23 10:57:37 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:37 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:37 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","CENTRAL","PONG","ccu"}]}) on binary://127.0.0.1:1999/RPC2:
Oct 23 10:57:37 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:37 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 10:57:37 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 10:57:37 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 10:57:37 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 10:57:37 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 10:57:37 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 10:57:37 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 10:57:37 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 10:57:37 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 10:57:37 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 10:57:37 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 10:57:37 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 10:57:38 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #01[BiDi|BC|Ren] 205F46->164A81 Info: 06 01 00 00 54
Oct 23 10:57:38 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:38 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","KEQ0055382:1","STATE",false}],[methodName:"event",params:{"1007","KEQ0055382:1","WORKING",false}]}) on binary://127.0.0.1:1999/RPC2:
Oct 23 10:57:38 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:38 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:38 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF_java","KEQ0055382:1","STATE",false}],[methodName:"event",params:{"BidCos-RF_java","KEQ0055382:1","WORKING",false}]}) on http://127.0.0.1:9292/bidcos:
Oct 23 10:57:38 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:38 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #0A[BiDi|BC|Ren] 205F46->164A81 Info: 06 02 00 00 54
Oct 23 10:57:38 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:38 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:38 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF_java","KEQ0055382:2","STATE",false}]}) on http://127.0.0.1:9292/bidcos:
Oct 23 10:57:38 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:38 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","KEQ0055382:2","STATE",false}],[methodName:"event",params:{"1007","KEQ0055382:2","WORKING",false}]}) on binary://127.0.0.1:1999/RPC2:
Oct 23 10:57:38 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:38 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:38 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF_java","KEQ0055382:2","WORKING",false}]}) on http://127.0.0.1:9292/bidcos:
Oct 23 10:57:38 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:39 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #13[BiDi|BC|Ren] 205F46->164A81 Info: 06 03 00 00 54
Oct 23 10:57:39 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:39 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF_java","KEQ0055382:3","STATE",false}]}) on http://127.0.0.1:9292/bidcos:
Oct 23 10:57:39 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:39 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:39 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF_java","KEQ0055382:3","WORKING",false}]}) on http://127.0.0.1:9292/bidcos:
Oct 23 10:57:39 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:39 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:39 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","KEQ0055382:3","STATE",false}],[methodName:"event",params:{"1007","KEQ0055382:3","WORKING",false}]}) on binary://127.0.0.1:1999/RPC2:
Oct 23 10:57:39 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:40 ccu3-webui user.info dÎè~^B: ACK received after 2 repetitions: #1C[BiDi|BC|Ren] 205F46->164A81 Info: 06 04 00 00 54
Oct 23 10:57:40 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:40 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","KEQ0055382:4","STATE",false}]}) on binary://127.0.0.1:1999/RPC2:
Oct 23 10:57:40 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 10:57:40 ccu3-webui user.warn rfd: XmlRpc transport failed (first try), retrying...
Oct 23 10:57:40 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","KEQ0055382:4","WORKING",false}]}) on binary://127.0.0.1:1999/RPC2:
Oct 23 10:57:40 ccu3-webui user.err rfd: XmlRpc transport error
Oct 23 11:02:40 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #01[BiDi|BC|Ren] 528DFC->164A81 EnergySpontaenous: 80 00 00 00 00 00 00 00 09 10 FC
Oct 23 11:02:40 ccu3-webui user.info rfd: 1007 support deleteDevices
Oct 23 11:02:40 ccu3-webui user.info rfd: 1007 support event
Oct 23 11:02:40 ccu3-webui user.info rfd: 1007 support listDevices
Oct 23 11:02:40 ccu3-webui user.info rfd: 1007 support newDevices
Oct 23 11:02:40 ccu3-webui user.info rfd: 1007 support replaceDevice
Oct 23 11:02:40 ccu3-webui user.info rfd: yes support replace device
Oct 23 11:02:40 ccu3-webui user.info rfd: 1007 support reportValueUsage
Oct 23 11:02:40 ccu3-webui user.info rfd: 1007 support setReadyConfig
Oct 23 11:02:40 ccu3-webui user.info rfd: 1007 support system.listMethods
Oct 23 11:02:40 ccu3-webui user.info rfd: 1007 support system.methodHelp
Oct 23 11:02:40 ccu3-webui user.info rfd: 1007 support updateDevice
Oct 23 11:02:40 ccu3-webui user.info rfd: 1007 support system.multicall
Oct 23 11:02:40 ccu3-webui local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Oct 23 11:02:40 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =init Params = {"xmlrpc_bin://127.0.0.1:1999","1008"} result= nil [iseXmlRpc.cpp:2599]
Oct 23 11:02:40 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallInit: CallXmlrpcMethod failed [iseXmlRpc.cpp:1204]
Oct 23 11:02:40 ccu3-webui local0.err ReGaHss: Error: XmlRpcClientThread::ThreadFunction(): failed call init for interface=VirtualDevices [iseRTHss.cpp:163]
Oct 23 11:02:40 ccu3-webui local0.err ReGaHss: Error: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [iseXmlRpc.h:281]
Oct 23 11:02:40 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute failed; method =init Params = {"xmlrpc_bin://127.0.0.1:1999","1009"} result= nil [iseXmlRpc.cpp:2599]
Oct 23 11:02:40 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallInit: CallXmlrpcMethod failed [iseXmlRpc.cpp:1204]
Oct 23 11:02:40 ccu3-webui local0.err ReGaHss: Error: XmlRpcClientThread::ThreadFunction(): failed call init for interface=HmIP-RF [iseRTHss.cpp:163]
Oct 23 11:02:40 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #01[BiDi|BC|Ren] 528E27->164A81 EnergySpontaenous: 80 00 00 00 00 00 00 00 08 F6 FA
Oct 23 11:02:40 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #0A[BiDi|BC|Ren] 528DFC->164A81 Info: 06 01 00 00 3F
Oct 23 11:02:41 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #0A[BiDi|BC|Ren] 528E27->164A81 Info: 06 01 00 00 4D
Oct 23 11:02:41 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #01[BiDi|BC|Ren] 62933D->164A81 Info: 06 01 00 00 50
Oct 23 11:02:41 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #01[BiDi|BC|Ren] 199221->164A81 Info: 06 01 C8 00 3B
Oct 23 11:02:41 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #25[BiDi|BC|Ren] 205F46->164A81 Info: 06 01 00 00 54
Oct 23 11:02:42 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #2E[BiDi|BC|Ren] 205F46->164A81 Info: 06 02 00 00 54
Oct 23 11:02:42 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #37[BiDi|BC|Ren] 205F46->164A81 Info: 06 03 00 00 54
Oct 23 11:02:42 ccu3-webui user.info dÎè~^B: ACK received after 0 repetitions: #40[BiDi|BC|Ren] 205F46->164A81 Info: 06 04 00 00 54
Oct 23 11:02:42 ccu3-webui user.err rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Oct 23 11:02:42 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"OEQ0024393:1","BRIGHTNESS"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Oct 23 11:02:42 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Oct 23 11:02:42 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Oct 23 11:02:42 ccu3-webui user.err rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Oct 23 11:02:42 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"OEQ0987184:7","DECISION_VALUE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Oct 23 11:02:42 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Oct 23 11:02:42 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
und hmserver.log nach Neustart:

Code: Alles auswählen

Oct 23 10:57:32 de.eq3.lib.util.dynamics.GenericFactory INFO  [main] @GenericFactory 
Oct 23 10:57:32 de.eq3.lib.util.dynamics.GenericFactory INFO  [main] creating instance of HMServerConfiguration with no-arg constructor 
Oct 23 10:57:37 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_POWER_SHORT_CIRCUIT_BUS_1 subtype=default 
Oct 23 10:57:37 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_POWER_SHORT_CIRCUIT_BUS_2 subtype=default 
Oct 23 10:57:37 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_1 subtype=default 
Oct 23 10:57:37 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_2 subtype=default 
Oct 23 10:57:37 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_BUS_CONFIG_MISMATCH subtype=default 
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [HMIPTRXWriterWorker] (1) *worker 
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [KeyServerWorker] (1) *worker 
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [KryoPersistenceWorker] (1) *worker 
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [TransactionSubsystemHandler] (1) *worker 
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [FirmwareLoaderFileSystem] (1) *worker 
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerPersistentDataLoader] (1)  
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerAdapterInitialization] (1)  
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [BackendCommandHandler] (1)  
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceInclusionAcceptHandler] (1)  
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [CheckDeviceExistHandler] (1)  
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [IncomingHMIPFrameHandler] (1)  
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceBackgroundUpdateSubsystem] (1)  
Oct 23 10:57:37 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceInclusionDefaultConfigurationChanger] (1)  
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [CyclicSmokeDetectorAwakening] (1)  
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerFirmwareUpdateInitialization] (1)  
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyNotificationHandler] (1) *worker 
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyAPIWorker] (1) *worker 
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyBackendNotificationHandler] (3) *worker 
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyBlindLevelCorrectionHandler] (1) *worker 
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyInitializion] (1)  
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: deploying 20 classes to Vert.x 
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: 20 VertxDeployers initialized 
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of CyclicSmokeDetectorAwakening succeeded (23a912d6-bf86-4ffa-9c03-7c62f5038b87) 
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of CheckDeviceExistHandler succeeded (9f9d889a-9d2e-413f-9633-741d87755c96) 
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of HMIPTRXWriterWorker succeeded (c5ff3d8d-441e-4013-8be3-cc37c4d24734) 
Oct 23 10:57:38 de.eq3.cbcs.server.core.vertx.KeyServerWorker ERROR [vert.x-worker-thread-1] Missing key server configuration parameter (Network.Key) for  mode: KEYSERVER_LOCAL 
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of KeyServerWorker succeeded (a85c5ead-fa88-449a-8a7d-7ba745c98288) 
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of TransactionSubsystemHandler succeeded (c90c8122-6408-4e7c-9572-f8c24130ce25) 
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of DeviceInclusionDefaultConfigurationChanger succeeded (c9dd1e41-1881-4b10-a315-1786d6660dd5) 
Oct 23 10:57:38 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of LegacyBlindLevelCorrectionHandler succeeded (cc860671-9275-4500-9847-41b24dc2e0f1) 
Oct 23 10:57:39 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of KryoPersistenceWorker succeeded (814b0bc7-2caf-4a71-b26e-e9d43334c34c) 
Oct 23 10:57:39 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of LocalServerPersistentDataLoader succeeded (1fbf9d1a-bb45-4e0e-82d0-6fffdee939fd) 
Oct 23 10:57:39 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of DeviceBackgroundUpdateSubsystem succeeded (8784137f-1de7-4d43-93f2-41e2e94dfa10) 
Oct 23 10:57:39 de.eq3.cbcs.server.core.otau.util.FirmwareLoaderFileSystem INFO  [vert.x-worker-thread-3] SYSTEM: Firmware update directory is set to /etc/config/firmware 
Oct 23 10:57:39 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of FirmwareLoaderFileSystem succeeded (c78ab22e-2a3f-4d9b-8d2d-1e0d674bd0b0) 
Oct 23 10:57:39 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of LegacyAPIWorker succeeded (49d5b798-519e-446d-8d0e-19205438aea9) 
Oct 23 10:57:39 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of IncomingHMIPFrameHandler succeeded (00c977f2-057a-4e6f-93a7-60025b61d9c1) 
Oct 23 10:57:39 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of BackendCommandHandler succeeded (234bdca9-6a8c-46da-8aa0-551f7e8bfff4) 
Oct 23 10:57:39 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of DeviceInclusionAcceptHandler succeeded (c8e4a6a3-715d-4bff-8c37-64e30a191ccc) 
Oct 23 10:57:39 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of LegacyNotificationHandler succeeded (4292034c-17a1-4a3c-821c-5e19def9f33d) 
Oct 23 10:57:39 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of LegacyBackendNotificationHandler succeeded (fcd6eee6-2b50-465b-83ac-a04d779be0c2) 
Oct 23 10:57:40 de.eq3.cbcs.server.local.base.internal.LocalServerAdapterInitialization ERROR [vert.x-eventloop-thread-6] Error 'LOCAL_ADAPTER_NO_SUCH_PORT' while trying to open port '/dev/mmd_hmip': 
de.eq3.cbcs.lib.commdevice.CommDeviceException: Exception while trying to open serial port. Check configured port '/dev/mmd_hmip'
	at de.eq3.cbcs.lib.nrjavaserialdevice.SerialCommDevice.open(SerialCommDevice.java:109)
	at de.eq3.cbcs.lib.hmiptrxcommadapter.HomeMaticIPTRXCommAdapter.open(HomeMaticIPTRXCommAdapter.java:737)
	at de.eq3.cbcs.lib.hmiptrxcommadapter.HomeMaticIPTRXCommAdapter.<init>(HomeMaticIPTRXCommAdapter.java:102)
	at de.eq3.cbcs.server.local.base.internal.ShareableHomeMaticIPTRXCommAdapter.<init>(ShareableHomeMaticIPTRXCommAdapter.java:25)
	at de.eq3.cbcs.server.local.base.internal.LocalServerAdapterInitialization.start(LocalServerAdapterInitialization.java:182)
	at io.vertx.core.AbstractVerticle.start(AbstractVerticle.java:111)
	at io.vertx.core.impl.DeploymentManager.lambda$doDeploy$8(DeploymentManager.java:434)
	at io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
	at io.netty.util.concurrent.AbstractEventExecutor.safeExecute(AbstractEventExecutor.java:163)
	at io.netty.util.concurrent.SingleThreadEventExecutor.runAllTasks(SingleThreadEventExecutor.java:403)
	at io.netty.channel.nio.NioEventLoop.run(NioEventLoop.java:445)
	at io.netty.util.concurrent.SingleThreadEventExecutor$5.run(SingleThreadEventExecutor.java:858)
	at java.lang.Thread.run(Thread.java:748)
Caused by: gnu.io.NoSuchPortException
	at gnu.io.CommPortIdentifier.getPortIdentifier(CommPortIdentifier.java:294)
	at de.eq3.cbcs.lib.nrjavaserialdevice.SerialCommDevice.open(SerialCommDevice.java:100)
	... 12 more
Oct 23 10:57:40 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of LocalServerAdapterInitialization succeeded (625d4c12-36b2-49d4-bab7-6b5964d6109a) 
Oct 23 10:57:45 de.eq3.cbcs.vertx.management.VertxManager WARN  [vert.x-eventloop-thread-3] SYSTEM ADVICE: pre-conditions for deployment of LegacyInitializion still not met - check deployment configuration  (still unfulfilled: [connector.open]) 
Oct 23 10:57:45 de.eq3.cbcs.vertx.management.VertxManager WARN  [vert.x-eventloop-thread-4] SYSTEM ADVICE: pre-conditions for deployment of LocalServerFirmwareUpdateInitialization still not met - check deployment configuration  (still unfulfilled: [connector.open]) 
Oct 23 10:57:52 de.eq3.cbcs.vertx.management.VertxManager WARN  [vert.x-eventloop-thread-0] SYSTEM ADVICE: long-lasting deployment, check deployment configuration - currently deployed 18 out of 20 
Oct 23 10:57:52 de.eq3.cbcs.vertx.management.VertxManager WARN  [vert.x-eventloop-thread-4] SYSTEM ADVICE: pre-conditions for deployment of LocalServerFirmwareUpdateInitialization still not met - check deployment configuration  (still unfulfilled: [connector.open]) 
Oct 23 10:57:52 de.eq3.cbcs.vertx.management.VertxManager WARN  [vert.x-eventloop-thread-3] SYSTEM ADVICE: pre-conditions for deployment of LegacyInitializion still not met - check deployment configuration  (still unfulfilled: [connector.open]) 
Oct 23 10:57:59 de.eq3.cbcs.vertx.management.VertxManager WARN  [vert.x-eventloop-thread-3] SYSTEM ADVICE: pre-conditions for deployment of LegacyInitializion still not met - check deployment configuration  (still unfulfilled: [connector.open]) 
Oct 23 10:57:59 de.eq3.cbcs.vertx.management.VertxManager WARN  [vert.x-eventloop-thread-4] SYSTEM ADVICE: pre-conditions for deployment of LocalServerFirmwareUpdateInitialization still not met - check deployment configuration  (still unfulfilled: [connector.open])
Ich wäre für jede Hilfe dankbar, da ich nicht weiß, wo ich noch weiter nach dem Problem suchen könnte.

Vielen Dank für die Hilfe

Marcus
Nach oben
Benutzeravatar
deimos
Beiträge: 5396
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 957 Mal
Kontaktdaten:
Kontaktdaten von deimos

Re: HomeMatic RS485 Gateway zeigt keinen Status

Beitrag von deimos » 23.10.2018, 11:32

Hi,

verstehe ich es richtig, dass du von einer CCU1 gewechselt bist?

In dem Fall ist es recht wahrscheinlich, dass ein Firmware Update des LAN GW vorgenommen wurde. Und da hatte ich schon mal das Problem, dass das LAN GW eine extra Einladung brauchte in Form eines Stromlos Machens für 5 Minuten. Danach lief alles, als wäre nie etwas gewesen.

Ansonsten sieht man bei deinem wirklich vorbildlich umfangreichen Log, dass das LAN GW zwar im Netzwerk von piVCCU gefunden wird (Er listet die Firmware Version auf und dafür muss er das LAN GW im Netzwerk finden), aber der hs485d kann nicht mit dem Gerät kommunizieren. Wirklich eine Idee, was da schief geht, habe ich nicht und das ist alles komplett im Closed Source, so dass ich mich da weder einlesen kann, geschweige denn irgendwelche Anpassungen machen könnte.

Viele Grüße
Alex
Nach oben
Grumbler
Beiträge: 2
Registriert: 23.10.2018, 09:49

Re: HomeMatic RS485 Gateway zeigt keinen Status

Beitrag von Grumbler » 23.10.2018, 12:35

Hi Alex,

vielen Dank für die Hilfe! Das Gateway wurde tatsächlich beim ersten Start von 1.0.4 auf 1.0.5 upgedated. Ich habe auf Deinen Rat hin nun alles für 10 min komplett stromlos gemacht (bisher immer nur Teile oder einzelne Neustarts) inkl. Abziehen des Netzteils des Raspberry.

Und siehe da es geht!
2018-10-23_12h04_21.png
2018-10-23_12h04_21.png (3.92 KiB) 994 mal betrachtet

Es steht nun unter Geräte anlernen auch Homematic Wired zur Verfügung und meine Aktoren wurden auf Anhieb gefunden.

An alle Mitleidenden noch einmal der Tipp wirklich alles komplett stromlos zu machen.

Besten Dank, viele Grüße und ein riesen Lob für Deine Arbeit an piVCCU!

Marcus
Nach oben
Antworten

Zurück zu „piVCCU“