HomematicIP unter Pivccu 2 nicht mehr erreichbar

[deimos]

Hi,

hast du einen Neustart nach der Installation des Kernels gemacht.

Viele Grüße
Alex

[thormann]

Ja, klar, sogar 2x!

[deimos]

Hi,

dann bitte einmal

Code: Alles auswählen

sudo dpkg-reconfigure pivccu-modules-dkms

Und dann einen Reboot.

Viele Grüße
Alex

[thormann]

Das scheint auch nicht richtig zu klappen:

Code: Alles auswählen

sudo dpkg-reconfigure pivccu-modules-dkms
Removed symlink /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service.

------------------------------
Deleting module version: 1.0.18
completely from the DKMS tree.
------------------------------
Done.
Loading new pivccu-1.0.18 DKMS files...
dpkg: warning: version '*-*' has bad syntax: version number does not start with digit
It is likely that 4.9.35-v7+ belongs to a chroot's host
Building initial module for 4.9.35-v7+
Error! Bad return status for module build on kernel: 4.9.35-v7+ (armv7l)
Consult /var/lib/dkms/pivccu/1.0.18/build/make.log for more information.
Created symlink from /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service to /lib/systemd/system/pivccu-dkms.service.

[thormann]

hier noch die angegebene make.log:

Code: Alles auswählen

cat /var/lib/dkms/pivccu/1.0.18/build/make.log
DKMS make.log for pivccu-1.0.18 for kernel 4.9.35-v7+ (armv7l)
Mon 10 Dec 17:11:13 CET 2018
make -C /lib/modules/4.9.35-v7+/build M=/var/lib/dkms/pivccu/1.0.18/build modules
make[1]: Entering directory '/usr/src/linux-headers-4.9.35-v7+'
  CC [M]  /var/lib/dkms/pivccu/1.0.18/build/eq3_char_loop.o
  CC [M]  /var/lib/dkms/pivccu/1.0.18/build/plat_eq3ccu2.o
  CC [M]  /var/lib/dkms/pivccu/1.0.18/build/generic_raw_uart.o
/var/lib/dkms/pivccu/1.0.18/build/generic_raw_uart.c: In function ‘generic_raw_uart_get_gpio_pin_number’:
/var/lib/dkms/pivccu/1.0.18/build/generic_raw_uart.c:687:10: error: implicit declaration of function ‘dev_fwnode’ [-Werror=implicit-function-declaration]
   struct fwnode_handle *fwnode = dev_fwnode(dev);
          ^
/var/lib/dkms/pivccu/1.0.18/build/generic_raw_uart.c:687:34: warning: initialization makes pointer from integer without a cast
   struct fwnode_handle *fwnode = dev_fwnode(dev);
                                  ^
/var/lib/dkms/pivccu/1.0.18/build/generic_raw_uart.c:688:29: error: too many arguments to function ‘fwnode_get_named_gpiod’
   struct gpio_desc *gpiod = fwnode_get_named_gpiod(fwnode, label, 0, GPIOD_ASIS, label);
                             ^
In file included from ./include/asm-generic/gpio.h:13:0,
                 from ./arch/arm/include/asm/gpio.h:9,
                 from ./include/linux/gpio.h:48,
                 from /var/lib/dkms/pivccu/1.0.18/build/generic_raw_uart.c:39:
./include/linux/gpio/consumer.h:137:19: note: declared here
 struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
                   ^
cc1: some warnings being treated as errors
scripts/Makefile.build:299: recipe for target '/var/lib/dkms/pivccu/1.0.18/build/generic_raw_uart.o' failed
make[2]: *** [/var/lib/dkms/pivccu/1.0.18/build/generic_raw_uart.o] Error 1
Makefile:1490: recipe for target '_module_/var/lib/dkms/pivccu/1.0.18/build' failed
make[1]: *** [_module_/var/lib/dkms/pivccu/1.0.18/build] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.9.35-v7+'
Makefile:21: recipe for target 'all' failed
make: *** [all] Error 2

[deimos]

Hi,

YAHM hinterläßt scheinbar richtig viel "Müll".

Code: Alles auswählen

sudo /usr/src/linux-headers-4.9.*
sudo dpkg-reconfigure pivccu-modules-dkms

Viele Grüße
Alex

[thormann]

Hmm,

Code: Alles auswählen

sudo /usr/src/linux-headers-4.9.*
sudo: /usr/src/linux-headers-4.9.35+: command not found

[thormann]

Gibt zwei Verzeichnisse

Code: Alles auswählen

sudo ls /usr/src/linux-headers-4.9.*
/usr/src/linux-headers-4.9.35+:
arch  block  certs  crypto  Documentation  drivers  firmware  fs  include  init  ipc  Kconfig  kernel  lib  Makefile  mm  Module.symvers  net  samples	scripts  security  sound  tools  usr  virt

/usr/src/linux-headers-4.9.35-v7+:
arch  block  certs  crypto  Documentation  drivers  firmware  fs  include  init  ipc  Kconfig  kernel  lib  Makefile  mm  Module.symvers  net  samples	scripts  security  sound  tools  usr  virt

[deimos]

Hi,

sorry, ich meine natürlich

Code: Alles auswählen

sudo rm -rf /usr/src/linux-headers-4.9.*

Viele Grüße
Alex

[thormann]

dann kommt:

Code: Alles auswählen

sudo dpkg-reconfigure pivccu-modules-dkms
Removed symlink /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service.

------------------------------
Deleting module version: 1.0.18
completely from the DKMS tree.
------------------------------
Done.
Loading new pivccu-1.0.18 DKMS files...
dpkg: warning: version '*-*' has bad syntax: version number does not start with digit
It is likely that 4.9.35-v7+ belongs to a chroot's host
Module build for the currently running kernel was skipped since the
kernel source for this kernel does not seem to be installed.
Created symlink from /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service to /lib/systemd/system/pivccu-dkms.service.

...auch nach Neustart