HomeMatic IP lässt sich unter PIVCCU3 nicht steuern/anlernen

Virtualisierte CCU für Raspberry Pi und Clones

Moderator: Co-Administratoren

Antworten
1nd
Beiträge: 8
Registriert: 18.02.2019, 17:03

HomeMatic IP lässt sich unter PIVCCU3 nicht steuern/anlernen

Beitrag von 1nd » 18.02.2019, 17:50

Hallo zusammen,

bin nun von meiner CCU2 auf Raspi3b mit RPI-RF-MOD umgezogen.
Ich habe das fertige Image (Raspbian_Stretch_Lite_piVCCU3_2019-01-05) auf eine nigel nagel neue SD-Karte geflasht. Daraufhin ein Backup von meiner CCU2 eingespielt und nun fällt mir auf, dass sich meine bereits angelernten HM IP-Geräte nicht steuern lassen, die HomeMatic-Geräte aber schon. Ein neues HM IP-Gerät (HmIP-SPI) lässt sich leider auch nicht anlernen.

In der Suche konnte ich leider nichts richtig passendes finden. (hatte kein YAHM installiert)
Über Hilfe/Lösungsvorschläge wäre ich sehr dankbar.

Code: Alles auswählen

pi@raspberrypi:~ $ sudo pivccu-info
piVCCU version: 3.41.11-17
Kernel modules: Available
Raw UART dev:   Available
Rasp.Pi3 UART:  Assigned to GPIO pins
HMRF Hardware:  RPI-RF-MOD
HMIP Hardware:  RPI-RF-MOD
Board serial:   58A9A71437
Radio MAC:      unknown
SGTIN:          3014F711A0001F58A9A71437
State:          RUNNING
PID:            858
IP:             10.8.3.67
IP:             192.168.178.17
CPU use:        43.31 seconds
BlkIO use:      52.25 MiB
Link:           vethpivccu
 TX bytes:      518.76 KiB
 RX bytes:      560.86 KiB
 Total bytes:   1.05 MiB
Zuletzt geändert von 1nd am 18.02.2019, 18:31, insgesamt 1-mal geändert.
Nach oben
1nd
Beiträge: 8
Registriert: 18.02.2019, 17:03

Re: HomeMatic IP lässt sich unter PIVCCU3 nicht steuern/anlernen

Beitrag von 1nd » 18.02.2019, 18:06

Code: Alles auswählen

Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   mssfix = 1450
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   explicit_exit_notification = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]: Connection profiles END
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_random = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ipchange = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   dev = 'tun'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   dev_type = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   dev_node = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   lladdr = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   topology = 1
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_local = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_remote_netmask = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_noexec = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_nowarn = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_ipv6_local = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_ipv6_netbits = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_ipv6_remote = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   shaper = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   mtu_test = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   mlock = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   keepalive_ping = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   keepalive_timeout = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   inactivity_timeout = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ping_send_timeout = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ping_rec_timeout = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ping_rec_timeout_action = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ping_timer_remote = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remap_sigusr1 = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   persist_tun = ENABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   persist_local_ip = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   persist_remote_ip = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   persist_key = ENABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   passtos = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   resolve_retry_seconds = 1000000000
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   resolve_in_advance = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   username = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   groupname = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   chroot_dir = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   cd_dir = '/usr/local/addons/hconnectvpn'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   writepid = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   up_script = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   down_script = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   down_pre = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   up_restart = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   up_delay = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   daemon = ENABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   inetd = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   log = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   suppress_timestamps = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   machine_readable_output = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   nice = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   verbosity = 4
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   mute = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   gremlin = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   status_file = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   status_file_version = 1
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   status_file_update_freq = 60
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   occ = ENABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   rcvbuf = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   sndbuf = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   mark = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   sockflags = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   fast_io = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   comp.alg = 2
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   comp.flags = 1
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   route_script = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   route_default_gateway = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   route_default_metric = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   route_noexec = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   route_delay = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   route_delay_window = 30
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   route_delay_defined = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   route_nopull = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   route_gateway_via_dhcp = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   allow_pull_fqdn = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   management_addr = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   management_port = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   management_user_pass = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   management_log_history_cache = 250
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   management_echo_buffer_size = 100
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   management_write_peer_info_file = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   management_client_user = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   management_client_group = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   management_flags = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   shared_secret_file = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   key_direction = not set
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ciphername = 'BF-CBC'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ncp_enabled = ENABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ncp_ciphers = 'AES-256-GCM:AES-128-GCM'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   authname = 'SHA1'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   prng_hash = 'SHA1'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   prng_nonce_secret_len = 16
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   keysize = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   engine = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   replay = ENABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   mute_replay_warnings = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   replay_window = 64
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   replay_time = 15
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   packet_id_file = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   use_iv = ENABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   test_crypto = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   tls_server = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   tls_client = ENABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   key_method = 2
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ca_file = './keys/ca.crt'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ca_path = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   dh_file = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   cert_file = './keys/andy.crt'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   extra_certs_file = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   priv_key_file = './keys/andy.key'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   pkcs12_file = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   cipher_list = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   tls_cert_profile = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   tls_verify = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   tls_export_cert = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   verify_x509_type = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   verify_x509_name = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   crl_file = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ns_cert_type = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 65535
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_ku[i] = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   remote_cert_eku = 'TLS Web Server Authentication'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ssl_flags = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   tls_timeout = 2
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   renegotiate_bytes = -1
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   renegotiate_packets = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   renegotiate_seconds = 3600
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   handshake_window = 60
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   transition_window = 3600
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   single_session = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   push_peer_info = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   tls_exit = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   tls_auth_file = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   tls_crypt_file = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   server_network = 0.0.0.0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   server_netmask = 0.0.0.0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   server_network_ipv6 = ::
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   server_netbits_ipv6 = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   server_bridge_ip = 0.0.0.0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   server_bridge_netmask = 0.0.0.0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   server_bridge_pool_start = 0.0.0.0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   server_bridge_pool_end = 0.0.0.0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_pool_defined = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_pool_start = 0.0.0.0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_pool_end = 0.0.0.0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_pool_netmask = 0.0.0.0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_pool_persist_filename = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_pool_persist_refresh_freq = 600
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_ipv6_pool_defined = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_ipv6_pool_base = ::
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ifconfig_ipv6_pool_netbits = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   n_bcast_buf = 256
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   tcp_queue_limit = 64
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   real_hash_size = 256
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   virtual_hash_size = 256
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   client_connect_script = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   learn_address_script = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   client_disconnect_script = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   client_config_dir = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   ccd_exclusive = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   tmp_dir = '/tmp'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   push_ifconfig_defined = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   push_ifconfig_local = 0.0.0.0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   push_ifconfig_remote_netmask = 0.0.0.0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   push_ifconfig_ipv6_defined = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   push_ifconfig_ipv6_local = ::/0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   push_ifconfig_ipv6_remote = ::
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   enable_c2c = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   duplicate_cn = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   cf_max = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   cf_per = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   max_clients = 1024
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   max_routes_per_client = 256
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   auth_user_pass_verify_script = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   auth_user_pass_verify_script_via_file = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   auth_token_generate = DISABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   auth_token_lifetime = 0
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   port_share_host = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   port_share_port = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   client = ENABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   pull = ENABLED
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]:   auth_user_pass_file = '[UNDEF]'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]: OpenVPN 2.4.6 arm-buildroot-linux-gnueabihf [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [MH/PKTINFO] [AEAD] built on Nov 12 2018
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[714]: library versions: OpenSSL 1.0.2o  27 Mar 2018, LZO 2.10
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: LZO compression initializing
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: Control Channel MTU parms [ L:1622 D:1212 EF:38 EB:0 ET:0 EL:3 ]
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: Data Channel MTU parms [ L:1622 D:1450 EF:122 EB:406 ET:0 EL:3 ]
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: Local Options String (VER=V4): 'V4,dev-type tun,link-mtu 1542,tun-mtu 1500,proto UDPv4,comp-lzo,cipher BF-CBC,auth SHA1,keysize 128,key-method 2,tls-client'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: Expected Remote Options String (VER=V4): 'V4,dev-type tun,link-mtu 1542,tun-mtu 1500,proto UDPv4,comp-lzo,cipher BF-CBC,auth SHA1,keysize 128,key-method 2,tls-server'
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: TCP/UDP: Preserving recently used remote address: [AF_INET]52.232.72.85:1194
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: Socket Buffers: R=[163840->163840] S=[163840->163840]
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: UDP link local: (not bound)
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: UDP link remote: [AF_INET]52.232.72.85:1194
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: TLS: Initial packet from [AF_INET]52.232.72.85:1194, sid=c77765f3 13bf4fd1
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: VERIFY OK: depth=1, C=DE, ST=NRW, L=Wetter, O=INTEX Datensysteme, OU=IT, CN=INTEX Datensysteme CA, name=HConnect, emailAddress=hconnect@deike.cc
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: VERIFY KU OK
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: Validating certificate extended key usage
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: VERIFY EKU OK
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: VERIFY OK: depth=0, C=DE, ST=NRW, L=Wetter, O=INTEX Datensysteme, OU=IT, CN=server, name=HConnect, emailAddress=hconnect@deike.cc
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: Control Channel: TLSv1.2, cipher TLSv1/SSLv3 DHE-RSA-AES256-GCM-SHA384, 2048 bit RSA
Feb 18 17:56:27 ccu3-webui daemon.notice openvpn[715]: [server] Peer Connection Initiated with [AF_INET]52.232.72.85:1194
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.1,topology subnet,ping 10,ping-restart 120,ifconfig 10.8.3.67 255.255.0.0'
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: OPTIONS IMPORT: timers and/or timeouts modified
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: OPTIONS IMPORT: --ifconfig/up options modified
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: OPTIONS IMPORT: route-related options modified
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:406 ET:0 EL:3 ]
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: Outgoing Data Channel: Cipher 'BF-CBC' initialized with 128 bit key
Feb 18 17:56:28 ccu3-webui daemon.warn openvpn[715]: WARNING: INSECURE cipher with block size less than 128 bit (64 bit).  This allows attacks like SWEET32.  Mitigate by using a --cipher with a larger block size (e.g. AES-256-CBC).
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: Outgoing Data Channel: Using 160 bit message hash 'SHA1' for HMAC authentication
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: Incoming Data Channel: Cipher 'BF-CBC' initialized with 128 bit key
Feb 18 17:56:28 ccu3-webui daemon.warn openvpn[715]: WARNING: INSECURE cipher with block size less than 128 bit (64 bit).  This allows attacks like SWEET32.  Mitigate by using a --cipher with a larger block size (e.g. AES-256-CBC).
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: Incoming Data Channel: Using 160 bit message hash 'SHA1' for HMAC authentication
Feb 18 17:56:28 ccu3-webui daemon.warn openvpn[715]: WARNING: cipher with small block size in use, reducing reneg-bytes to 64MB to mitigate SWEET32 attacks.
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: TUN/TAP device tun0 opened
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: TUN/TAP TX queue length set to 100
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: /sbin/ip link set dev tun0 up mtu 1500
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: /sbin/ip addr add dev tun0 10.8.3.67/16 broadcast 10.8.255.255
Feb 18 17:56:28 ccu3-webui daemon.warn openvpn[715]: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Feb 18 17:56:28 ccu3-webui daemon.notice openvpn[715]: Initialization Sequence Completed
Feb 18 17:56:30 ccu3-webui daemon.info ntpd[347]: Listen normally on 5 tun0 10.8.3.67:123
Feb 18 17:56:30 ccu3-webui daemon.info ntpd[347]: Listen normally on 6 tun0 [fe80::61d7:65aa:f6e0:a468%2]:123
Feb 18 17:56:33 ccu3-webui daemon.info cuxd[401]: INIT 'xmlrpc_bin://127.0.0.1:31999' '2362'
pi@raspberrypi:~ $

Code: Alles auswählen

pi@raspberrypi:~ $ sudo pivccu-attach cat /var/log/hmserver.log
Feb 18 17:55:53 de.eq3.lib.util.dynamics.GenericFactory INFO  [main] @GenericFactory
Feb 18 17:55:53 de.eq3.lib.util.dynamics.GenericFactory INFO  [main] created instance of HMServerConfiguration with parameter(s)
Feb 18 17:55:53 de.eq3.lib.util.dynamics.GenericFactory INFO  [main] passed 1 parameter(s), in declarative order [String]
Feb 18 17:55:58 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_POWER_SHORT_CIRCUIT_BUS_1 subtype=default
Feb 18 17:55:58 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_POWER_SHORT_CIRCUIT_BUS_2 subtype=default
Feb 18 17:55:58 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_1 subtype=default
Feb 18 17:55:58 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_2 subtype=default
Feb 18 17:55:58 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN  [Thread-0] Invalid state parameter or subtype: Parameter ERROR_BUS_CONFIG_MISMATCH subtype=default
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [HMIPTRXWriterWorker] (1) *worker
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [KeyServerWorker] (1) *worker
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [KryoPersistenceWorker] (1) *worker
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [TransactionSubsystemHandler] (1) *worker
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [FirmwareLoaderFileSystem] (1) *worker
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerPersistentDataLoader] (1)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerAdapterInitialization] (1)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [BackendCommandHandler] (1)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceInclusionAcceptHandler] (1)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [CheckDeviceExistHandler] (1)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [IncomingHMIPFrameHandler] (1)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceBackgroundUpdateSubsystem] (1)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceLiveUpdateSubsystem] (1)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceInclusionDefaultConfigurationChanger] (1)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [CyclicSmokeDetectorAwakening] (1)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerFirmwareUpdateInitialization] (1)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyNotificationHandler] (1) *worker
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyAPIWorker] (1) *worker
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyBackendNotificationHandler] (3) *worker
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyBlindLevelCorrectionHandler] (1) *worker
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyInitializion] (1)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: deploying 21 classes to Vert.x
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: 21 VertxDeployers initialized
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of CyclicSmokeDetectorAwakening succeeded (9aa62eaf-bfcf-4aca-86c5-6ef9ae971c6d)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of DeviceInclusionDefaultConfigurationChanger succeeded (54146739-8bfb-4d98-b9c9-37ea4c4299fb)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of TransactionSubsystemHandler succeeded (9e9ace0a-c4d7-4939-a056-21ddc6623604)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of CheckDeviceExistHandler succeeded (95e6c041-68fd-4726-ae6d-6fe84e4f9ce9)
Feb 18 17:55:58 de.eq3.cbcs.server.core.vertx.KeyServerWorker ERROR [vert.x-worker-thread-0] Missing key server configuration parameter (Network.Key) for  mode: KEYSERVER_LOCAL
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of HMIPTRXWriterWorker succeeded (cda87d78-3b79-4429-bc48-2c8c80018194)
Feb 18 17:55:58 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of KeyServerWorker succeeded (5f5907ef-69df-4a14-a59b-7b86d38a3514)
Feb 18 17:55:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of KryoPersistenceWorker succeeded (e04f7fbd-79a5-49d4-bfe1-442621db3488)
Feb 18 17:55:59 de.eq3.cbcs.server.core.live_otau.DeviceLiveUpdateSubsystem INFO  [vert.x-eventloop-thread-1] SYSTEM: DeviceLiveUpdateSubsystem started
Feb 18 17:55:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of LegacyBlindLevelCorrectionHandler succeeded (8754f122-0b1b-4af6-abea-818ae5e2c354)
Feb 18 17:55:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of DeviceLiveUpdateSubsystem succeeded (032e0274-57ea-42e2-b00b-17bcfc9bc982)
Feb 18 17:55:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of DeviceBackgroundUpdateSubsystem succeeded (ea36ad3e-7b4c-4e2b-9d8b-97f92a1a30e1)
Feb 18 17:55:59 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of LocalServerPersistentDataLoader succeeded (da05cf91-1571-4503-99c6-71223bebd999)
Feb 18 17:56:00 de.eq3.cbcs.server.core.otau.util.FirmwareLoaderFileSystem INFO  [vert.x-worker-thread-2] SYSTEM: Firmware update directory is set to /etc/config/firmware
Feb 18 17:56:00 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of IncomingHMIPFrameHandler succeeded (2ca7b96c-d72c-42e1-baf1-614fe9be0e6d)
Feb 18 17:56:00 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of FirmwareLoaderFileSystem succeeded (cb6eea80-340f-4d44-9ec9-ab323cf35bb7)
Feb 18 17:56:00 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of DeviceInclusionAcceptHandler succeeded (c66a0f39-9a27-4aa7-899a-66deb189e6ee)
Feb 18 17:56:00 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of LegacyBackendNotificationHandler succeeded (5e52fd51-146c-4305-831b-69b400ea1a70)
Feb 18 17:56:00 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of BackendCommandHandler succeeded (2545f69b-03ec-412e-9155-a514ad234c32)
Feb 18 17:56:00 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of LegacyNotificationHandler succeeded (d9ae39f2-9bcf-44f4-ac89-af311e16f34e)
Feb 18 17:56:00 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of LegacyAPIWorker succeeded (c98941bc-3b03-48ea-9f05-57719fbbdc88)
Feb 18 17:56:00 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of LocalServerAdapterInitialization succeeded (9b16a97f-13dc-4d13-ac8c-f983df75b91d)
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] TRX adapter state 1: HMIP_TRX_App
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] TRX adapter application is already running or started
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] No NWK, try to set address ...
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Try to set radio address 12259429...
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Set max send attempts for 3014F711A0001F58A9A71437 to 3
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Try to get application version...
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Application version 3.4.8
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Bootloader version 1.0.1
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] hmos version 1.34.0
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] MCU type: CC1310
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Duty Cycle: 0.0
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] set DutyCycle limit to ffffffc8
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Set Duty Cycle Limit
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Current Security Counter: 141940736
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Update security counter to calculation: 141943275
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] TRX adapter has no linkpartner
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Adapter with Access Point id 3014F711A0001F58A9A71437 initialized
Feb 18 17:56:00 de.eq3.cbcs.server.local.base.internal.LocalServerAdapterInitialization INFO  [Thread-6] HMIPTRXInitialResponseListener said that Adapter was initialized
Feb 18 17:56:01 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of LegacyInitializion succeeded (9a1fad1b-d9ca-4f8e-8a8f-5608b62f1e28)
Feb 18 17:56:01 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of LocalServerFirmwareUpdateInitialization succeeded (b5da4721-facd-4cc1-8da8-24308673d426)
Feb 18 17:56:01 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-0] SYSTEM: Checking all devices on all accesspoints for updates
Feb 18 17:56:01 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-0] SYSTEM: There are 0 APs queued with updatable devices
Feb 18 17:56:01 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: initial deployment complete _____________________________________________________
Feb 18 17:56:02 de.eq3.cbcs.server.local.LocalServer INFO  [Thread-0] SYSTEM: Bind XML-RPC api to port 32010
Feb 18 17:56:03 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Default MaxEventLoopExecuteTime: 2000000000
Feb 18 17:56:03 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Default BlockedThreadCheckInterval: 1000
Feb 18 17:56:03 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Default MaxWorkerExecuteTime: 60000000000
Feb 18 17:56:03 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Default EventLoopPoolSize: 8
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [BackendWorker] (1) *worker
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [GroupRequestWorker] (1) *worker
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [DiagramRequestWorker] (1) *worker
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [StorageRequestWorker] (1) *worker
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [DeviceFirmwareRequestWorker] (1) *worker
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [EnergyPriceRequestWorker] (1) *worker
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [CouplingRequestWorker] (1) *worker
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [RegaClientWorker] (1) *worker
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [GroupConfigurationPersistenceFileSystem] (1) *worker
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [HmIPGatewayManagementRequestWorker] (1) *worker
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: deploying 10 classes to Vert.x
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: 10 VertxDeployers initialized
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of BackendWorker succeeded (2127dfee-3409-459c-ba50-f793c333e109)
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of EnergyPriceRequestWorker succeeded (e0bbf02e-606f-48ec-baf8-3a9cb084da0e)
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of CouplingRequestWorker succeeded (e22f2780-60ce-4a50-a360-a39d6be46d41)
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of StorageRequestWorker succeeded (1b8336bb-a437-4504-a95a-1c6958ff4192)
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of GroupConfigurationPersistenceFileSystem succeeded (9ff0290c-8f66-4d63-a37a-357935bb8322)
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of RegaClientWorker succeeded (5e74c746-6541-4f44-9241-10c5fa431535)
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of DiagramRequestWorker succeeded (3352aa42-4644-4a7c-bfd4-735639596905)
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of GroupRequestWorker succeeded (f4412b20-ea73-4a41-90c1-c5a77a1b7cf7)
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of DeviceFirmwareRequestWorker succeeded (36d184f1-98eb-453a-84db-e665d960fa7f)
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of HmIPGatewayManagementRequestWorker succeeded (7982f96d-2e54-4506-b109-c32c99b7264f)
Feb 18 17:56:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: initial deployment complete _____________________________________________________
Feb 18 17:56:03 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Starting HMServer at 127.0.0.1:39292
Feb 18 17:56:03 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Read Configuration
Feb 18 17:56:03 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create Bidcos Dispatcher
Feb 18 17:56:03 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] InitBidCosCache
Feb 18 17:56:05 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create groupDefinitionProvider
Feb 18 17:56:05 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create VirtualDeviceHolder
Feb 18 17:56:05 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create VirtualDeviceHandlerRega
Feb 18 17:56:05 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create GroupAdministrationService
Feb 18 17:56:05 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create GroupDeviceDispatcher
Feb 18 17:56:05 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create GroupDeviceHandler
Feb 18 17:56:05 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-1] @GroupDeviceHandler - initializing...
Feb 18 17:56:05 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-1] --> created groupDeviceDispatcher (GroupDeviceService to BidCoS (via Dispatcher))
Feb 18 17:56:05 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-1] --> created virtualDeviceHandler (GroupDeviceService to ReGa)
Feb 18 17:56:05 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-1] --> got groupDefinitionProvider
Feb 18 17:56:05 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create BidCosGroupMemberProvider
Feb 18 17:56:05 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Init groupAdministrationService
Feb 18 17:56:05 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Init Virtual OS Device
Feb 18 17:56:05 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Init ESHLight Bridge
Feb 18 17:56:05 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-4] (un)registerCallback on LegacyServiceHandler called from url: http://192.168.178.15:2010
Feb 18 17:56:05 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-4] init finished
Feb 18 17:56:05 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO  [vert.x-worker-thread-3] Added InterfaceId: hm-rpc.2
Feb 18 17:56:06 de.eq3.cbcs.legacy.bidcos.rpc.internal.DeviceUtil INFO  [vert.x-worker-thread-3] updateDevicesForClient hm-rpc.2 -> 35 device addresses will be added
Feb 18 17:56:07 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create RrdDatalogging
Feb 18 17:56:07 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create MeasurementService
Feb 18 17:56:07 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Init MeasurementService
Feb 18 17:56:07 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create HTTP Server
Feb 18 17:56:07 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create BidCos context and start handler
Feb 18 17:56:07 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create group context and start handler
Feb 18 17:56:07 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-2] (un)registerCallback on LegacyServiceHandler called from url: http://127.0.0.1:39292/bidcos
Feb 18 17:56:07 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-2] init finished
Feb 18 17:56:07 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO  [vert.x-worker-thread-0] Added InterfaceId: HmIP-RF_java
Feb 18 17:56:07 de.eq3.cbcs.legacy.bidcos.rpc.internal.DeviceUtil INFO  [vert.x-worker-thread-0] updateDevicesForClient HmIP-RF_java -> 35 device addresses will be added
Feb 18 17:56:08 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Starting HMServer done
Feb 18 17:56:23 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO  [vert.x-eventloop-thread-4] (un)registerCallback on VirtualDeviceHandlerRega called from url: xmlrpc_bin://127.0.0.1:31999
Feb 18 17:56:23 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO  [vert.x-eventloop-thread-4] Added InterfaceId: 1010
Feb 18 17:56:23 de.eq3.ccu.virtualdevice.service.internal.rega.BackendWorker INFO  [vert.x-worker-thread-11] Execute BackendCommand: de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand
Feb 18 17:56:23 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-11] updateDevicesForClient -> 20 device addresses will be added
Feb 18 17:56:33 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-3] (un)registerCallback on LegacyServiceHandler called from url: xmlrpc_bin://127.0.0.1:31999
Feb 18 17:56:33 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-3] init finished
Feb 18 17:56:33 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO  [vert.x-worker-thread-2] Added InterfaceId: 1011
Feb 18 17:56:38 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-11] set ready config of INT0000002
Feb 18 17:56:38 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-11] set ready config of INT0000004
Feb 18 17:56:38 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-11] set ready config of INT0000005
Feb 18 17:56:38 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-11] set ready config of INT0000006
Feb 18 17:56:38 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-11] set ready config of INT0000007
Feb 18 18:00:59 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-0] SYSTEM: 0 Accesspoints in Queue
Feb 18 18:00:59 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-0] SYSTEM: Permanent-/Burstlistener Handler utilization: 0/50 used
Feb 18 18:00:59 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-0] SYSTEM: Eventlistener Handler utilization: 0/50 used
pi@raspberrypi:~ $


Code: Alles auswählen

pi@raspberrypi:~ $ sudo pivccu-attach ls -la /dev/
total 4
drwxr-xr-x    5 root     root           440 Feb 18 17:55 .
drwxr-xr-x   23 root     root          4096 Feb 18 17:55 ..
c--x--x--x    1 root     tty       136,   0 Feb 18 17:55 console
crw-rw-rw-    1 root     root      242,   0 Feb 18 17:55 eq3loop
lrwxrwxrwx    1 root     root            13 Feb 18 17:55 fd -> /proc/self/fd
crw-rw-rw-    1 root     root        1,   7 Feb 18 17:55 full
srw-rw-rw-    1 root     root             0 Feb 18 17:55 log
crw-rw-rw-    1 root     root      242,   2 Feb 18 17:55 mmd_bidcos
crw-rw-rw-    1 root     root      242,   1 Feb 18 17:55 mmd_hmip
drwxr-xr-x    2 root     root            60 Feb 18 17:55 net
crw-rw-rw-    1 root     root        1,   3 Feb 18 17:55 null
crw-rw-rw-    1 root     root        5,   2 Feb 18 17:55 ptmx
drwxr-xr-x    2 root     root             0 Feb 18 17:55 pts
crw-rw-rw-    1 root     root        1,   8 Feb 18 17:55 random
crw-rw-rw-    1 root     root      243,   0 Feb 18 17:55 raw-uart
drwxrwxrwt    2 root     root            40 Feb 18 17:55 shm
lrwxrwxrwx    1 root     root            15 Feb 18 17:55 stderr -> /proc/self/fd/2
lrwxrwxrwx    1 root     root            15 Feb 18 17:55 stdin -> /proc/self/fd/0
lrwxrwxrwx    1 root     root            15 Feb 18 17:55 stdout -> /proc/self/fd/1
crw-rw-rw-    1 root     root        5,   0 Feb 18 17:55 tty
crw-rw-rw-    1 root     root        1,   9 Feb 18 17:55 urandom
crw-rw-rw-    1 root     root        1,   5 Feb 18 17:55 zero

Code: Alles auswählen

pi@raspberrypi:~ $ sudo pivccu-attach cat /sys/module/plat_eq3ccu2/parameters/hmip_major
cat: can't open '/sys/module/plat_eq3ccu2/parameters/hmip_major': No such file or directory

Code: Alles auswählen

pi@raspberrypi:~ $ sudo pivccu-attach cat /sys/module/plat_eq3ccu2/parameters/hmip_minor
cat: can't open '/sys/module/plat_eq3ccu2/parameters/hmip_minor': No such file or directory
Nach oben
Benutzeravatar
deimos
Beiträge: 5396
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 957 Mal
Kontaktdaten:
Kontaktdaten von deimos

Re: HomeMatic IP lässt sich unter PIVCCU3 nicht steuern/anlernen

Beitrag von deimos » 18.02.2019, 18:55

Hi,

das sieht erstmal alles sehr gut aus, Funkmodul wird sauber erkannt und der Keywechsel auf der CCU wurde auch sauber getriggert.
Wie viel Zeit hast du dem System gelassen nach dem Einspielen des Backups? Der Keywechsel kann durchaus mal eine Stunde dauern und jede Aktion mit HmIP Geräten verlängert das potentiell.
Dann noch die Frage, wie siehg deine Stromversorgung aus?
Hast du eine externe Antenne, die CCU2 hat eine deutlicv bessere Funkleistung, wenn keine externe Antenne im Einsatz ist.
Hast du einen Raspi 3B oder 3B+?

Viele Grüße
Alex
Nach oben
1nd
Beiträge: 8
Registriert: 18.02.2019, 17:03

Re: HomeMatic IP lässt sich unter PIVCCU3 nicht steuern/anlernen

Beitrag von 1nd » 18.02.2019, 19:05

Hi und danke für die schnelle Antwort.

Ich weiß nicht was der Keywechsel ist, aber den "Umzug" + Backup habe ich schon vor ein paar Tagen gemacht.
Das Raspi wird mit 2250mA versorgt. (das originale Netzteil 2500mA von ELV ist leider zur Zeit nicht lieferbar, deshalb musste ich mir mit einem anderen helfen) Aber die 250mA weniger sollte noch im grünen Bereich sein, oder?
Externe Antenne ist verbaut.
Ein Raspi 3b ist im Einsatz.

Danke vorab

Gruß
Andy
Zuletzt geändert von 1nd am 18.02.2019, 19:10, insgesamt 1-mal geändert.
Nach oben
Benutzeravatar
deimos
Beiträge: 5396
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 957 Mal
Kontaktdaten:
Kontaktdaten von deimos

Re: HomeMatic IP lässt sich unter PIVCCU3 nicht steuern/anlernen

Beitrag von deimos » 18.02.2019, 19:08

Hi,

was heißt "mit 2250mA versorgt"? Nicht original elv Netzteil am Funkmodul?

Viele Grüße
Alex
Nach oben
1nd
Beiträge: 8
Registriert: 18.02.2019, 17:03

Re: HomeMatic IP lässt sich unter PIVCCU3 nicht steuern/anlernen

Beitrag von 1nd » 18.02.2019, 19:11

Nein nicht original, hab meinen letzten Post ergänzt^^
(das originale Netzteil 2500mA von ELV ist leider zur Zeit nicht lieferbar, deshalb musste ich mir mit einem anderen helfen) Aber die 250mA weniger sollte noch im grünen Bereich sein, oder?
Zuletzt geändert von 1nd am 18.02.2019, 19:15, insgesamt 1-mal geändert.
Nach oben
1nd
Beiträge: 8
Registriert: 18.02.2019, 17:03

Re: HomeMatic IP lässt sich unter PIVCCU3 nicht steuern/anlernen

Beitrag von 1nd » 18.02.2019, 19:14

Und wie erwähnt alle "normalen" Homematic-Geräte machen keine Probleme. Hab sogar noch ein paar Tür-/Fenstersensoren angelernt.
Nach oben
Benutzeravatar
deimos
Beiträge: 5396
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 957 Mal
Kontaktdaten:
Kontaktdaten von deimos

Re: HomeMatic IP lässt sich unter PIVCCU3 nicht steuern/anlernen

Beitrag von deimos » 18.02.2019, 19:20

Hi,

die mA Angabe auf einem Netzteil ist nur einer von vielen Parametern. Grade wg Funk ist dann z.B noch die Frage, wie sieht es z.B. mit Restwelligkeit aus, wie gleicht das Netzteil kurze Lastspitzen ab, usw.

Da es ansonsten von den Logs her gut aussieht, funktioniert entweder das Netzteil doch nicht, wie es soll oder du hast irgendwo einen Störsender auf 868Mhz.

Der Hinweis auf Homematic ohne IP zeigt hier auch, dass die Kommunikation vom Raspi mit dem Funkmodul funktioniert. Bei HmIP wird aber Listen-Before-Talk gemacht und wenn das Funkmodul dann denkt, dass da grade jemand anderes funkt, dann funkt es selber nicht.
Bei Homematic ohne IP wird stattdessen einfach direkt drauf losgefunkt. Und genau dieser Umstand macht HmIP empfindlicher gegen Störungen.

Viele Grüße
Alex
Nach oben
1nd
Beiträge: 8
Registriert: 18.02.2019, 17:03

Re: HomeMatic IP lässt sich unter PIVCCU3 nicht steuern/anlernen

Beitrag von 1nd » 18.02.2019, 19:26

Den IP-Presenzmelder (HmIP-SPI) habe ich bei den Anlernversuchen direkt neben das Raspi gelegt, trotzdem keine Chance. Dann habe ich noch zwei HM IP Zwischenstecker (welche schon angelernt sind), diese sind ca 3m von dem Raspi entfernt und die kann ich nun nicht mehr schalten.

Der Standort der Zentrale ist unverändert.

Sollte ich nun das originale Netzteil bestellen (lange Lieferzeit) :| , oder sollte auch ein etwaiges anderes (natürlich mit min. 2500mA) reichen?
Nach oben
Benutzeravatar
deimos
Beiträge: 5396
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 957 Mal
Kontaktdaten:
Kontaktdaten von deimos

Re: HomeMatic IP lässt sich unter PIVCCU3 nicht steuern/anlernen

Beitrag von deimos » 18.02.2019, 19:30

Hi,

muss ich mich jetzt selber zitieren? Die Frage kann man nicht allgemeingültig beantworten.

Viele Grüße
Alex
Nach oben
Antworten

Zurück zu „piVCCU“