HomeMatic-Forum / FHZ-Forum

Code: Alles auswählen

[code]piVCCU version: 3.43.15-18
Kernel modules: Not available
Raw UART dev:   Not available
Rasp.Pi3 UART:  Assigned to GPIO pins
HMRF Hardware:  unknown
HMIP Hardware:  unknown
Board serial:   unknown
Radio MAC:      unknown
SGTIN:          unknown
State:          STOPPED

Code: Alles auswählen

● pivccu.service - piVCCU
   Loaded: loaded (/lib/systemd/system/pivccu.service; enabled; vendor preset: enabled)
   Active: failed (Result: resources) since Thu 2019-03-14 17:20:28 UTC; 6min ago
      CPU: 288ms

Mar 14 17:19:52 raspberrypi start_container.sh[17088]: modprobe: FATAL: Module rpi_rf_mod_led not found in directory /lib/modules/4.14.98-v7+
Mar 14 17:19:52 raspberrypi start_container.sh[17088]: kernel.sched_rt_runtime_us = -1
Mar 14 17:19:58 raspberrypi start_container.sh[17088]: lxc-start: tools/lxc_start.c: main: 366 The container failed to start.
Mar 14 17:19:58 raspberrypi start_container.sh[17088]: lxc-start: tools/lxc_start.c: main: 368 To get more details, run the container in foreground mode.
Mar 14 17:19:58 raspberrypi start_container.sh[17088]: lxc-start: tools/lxc_start.c: main: 370 Additional information can be obtained by setting the --logfile and --logpriority options.
Mar 14 17:19:58 raspberrypi systemd[1]: pivccu.service: PID file /var/run/pivccu3.pid not readable (yet?) after start: No such file or directory
Mar 14 17:20:28 raspberrypi systemd[1]: pivccu.service: Daemon never wrote its PID file. Failing.
Mar 14 17:20:28 raspberrypi systemd[1]: Failed to start piVCCU.
Mar 14 17:20:28 raspberrypi systemd[1]: pivccu.service: Unit entered failed state.
Mar 14 17:20:28 raspberrypi systemd[1]: pivccu.service: Failed with result 'resources'.

Code: Alles auswählen

pi@raspberrypi:~ $ cd /usr/src/linux-headers-4.14.98-v7+
pi@raspberrypi:/usr/src/linux-headers-4.14.98-v7+ $ sudo mkdir -p net/wireguard
pi@raspberrypi:/usr/src/linux-headers-4.14.98-v7+ $ sudo touch net/wireguard/Kconfig
pi@raspberrypi:/usr/src/linux-headers-4.14.98-v7+ $ sudo touch net/wireguard/Makefile
pi@raspberrypi:/usr/src/linux-headers-4.14.98-v7+ $ sudo make scripts
  HOSTCC  scripts/kconfig/conf.o
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
scripts/kconfig/conf  --silentoldconfig Kconfig
  HOSTCC  scripts/genksyms/parse.tab.o
  HOSTLD  scripts/genksyms/genksyms
  CC      scripts/mod/empty.o
  MKELF   scripts/mod/elfconfig.h
  HOSTCC  scripts/mod/modpost.o
  CC      scripts/mod/devicetable-offsets.s
  CHK     scripts/mod/devicetable-offsets.h
  HOSTCC  scripts/mod/file2alias.o
  HOSTCC  scripts/mod/sumversion.o
  HOSTLD  scripts/mod/modpost
  HOSTCC  scripts/sortextable
scripts/sortextable.c:31:32: fatal error: tools/be_byteshift.h: No such file or directory
 #include <tools/be_byteshift.h>
                                ^
compilation terminated.
scripts/Makefile.host:102: recipe for target 'scripts/sortextable' failed
make[1]: *** [scripts/sortextable] Error 1
Makefile:572: recipe for target 'scripts' failed
make: *** [scripts] Error 2
pi@raspberrypi:/usr/src/linux-headers-4.14.98-v7+ $ sudo dpkg-reconfigure pivccu-modules-dkms
Removed /etc/systemd/system/pivccu.service.requires/pivccu-dkms.service.
Removed /etc/systemd/system/debmatic.service.wants/pivccu-dkms.service.
Removed /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service.

------------------------------
Deleting module version: 1.0.26
completely from the DKMS tree.
------------------------------
Done.

Creating symlink /var/lib/dkms/pivccu/1.0.26/source ->
                 /usr/src/pivccu-1.0.26

DKMS: add completed.

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area...
make -j4 KERNELRELEASE=4.14.98-v7+ ARCH=arm all....(bad exit status: 2)
Error! Bad return status for module build on kernel: 4.14.98-v7+ (armv7l)
Consult /var/lib/dkms/pivccu/1.0.26/build/make.log for more information.

Code: Alles auswählen

DKMS make.log for pivccu-1.0.26 for kernel 4.14.98-v7+ (armv7l)
Thu 14 Mar 17:23:59 UTC 2019
make -C /lib/modules/4.14.98-v7+/build M=/var/lib/dkms/pivccu/1.0.26/build modules
make[1]: Entering directory '/usr/src/linux-headers-4.14.98-v7+'
  CC [M]  /var/lib/dkms/pivccu/1.0.26/build/eq3_char_loop.o
  CC [M]  /var/lib/dkms/pivccu/1.0.26/build/plat_eq3ccu2.o
  CC [M]  /var/lib/dkms/pivccu/1.0.26/build/generic_raw_uart.o
  CC [M]  /var/lib/dkms/pivccu/1.0.26/build/pl011_raw_uart.o
  CC [M]  /var/lib/dkms/pivccu/1.0.26/build/dw_apb_raw_uart.o
/var/lib/dkms/pivccu/1.0.26/build/generic_raw_uart.c: In function ‘generic_raw_uart_get_gpio_pin_number’:
/var/lib/dkms/pivccu/1.0.26/build/generic_raw_uart.c:725:31: error: too few arguments to function ‘fwnode_get_named_gpiod’
     struct gpio_desc *gpiod = fwnode_get_named_gpiod(fwnode, label);
                               ^~~~~~~~~~~~~~~~~~~~~~
In file included from ./include/asm-generic/gpio.h:14:0,
                 from ./arch/arm/include/asm/gpio.h:10,
                 from ./include/linux/gpio.h:49,
                 from /var/lib/dkms/pivccu/1.0.26/build/generic_raw_uart.c:39:
./include/linux/gpio/consumer.h:138:19: note: declared here
 struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
                   ^~~~~~~~~~~~~~~~~~~~~~
scripts/Makefile.build:332: recipe for target '/var/lib/dkms/pivccu/1.0.26/build/generic_raw_uart.o' failed
make[2]: *** [/var/lib/dkms/pivccu/1.0.26/build/generic_raw_uart.o] Error 1
make[2]: *** Waiting for unfinished jobs....
Makefile:1535: recipe for target '_module_/var/lib/dkms/pivccu/1.0.26/build' failed
make[1]: *** [_module_/var/lib/dkms/pivccu/1.0.26/build] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.14.98-v7+'
Makefile:23: recipe for target 'all' failed
make: *** [all] Error 2

Code: Alles auswählen

root@opi2e_piVCCU3:~# apt upgrade -s
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
  armbian-config pivccu-modules-dkms
2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Inst pivccu-modules-dkms [1.0.25] (1.0.27 piVCCU stable:stable [all])
Inst armbian-config [5.76] (5.77 Armbian:stretch [all])
Conf pivccu-modules-dkms (1.0.27 piVCCU stable:stable [all])
Conf armbian-config (5.77 Armbian:stretch [all])