HB-RF-MOD externe Antenne

Virtualisierte CCU für Raspberry Pi und Clones

Moderator: Co-Administratoren

deimos
Beiträge: 3049
Registriert: 20.06.2017, 10:38
Wohnort: Leimersheim
Hat sich bedankt: 11 Mal
Danksagung erhalten: 55 Mal
Kontaktdaten:

Re: HB-RF-MOD externe Antenne

Beitrag von deimos » 12.07.2019, 10:38

Hi,

in der dmesg Ausgabe ich nichts wirklich Auffälliges. Ich kann hier auch nicht erkennen, dass das HB-RF-USB mehrfach gefunden wird, verwechselst du da vielleicht die ganzen Meldungen von USB Controller und Hubs?

Was kommt denn bei

Code: Alles auswählen

sudo pivccu-info
sudo pivccu-attach cat /var/log/hmserver.log
sudo pivccu-attach cat /var/log/messages
Viele Grüße
Alex

RouvenE
Beiträge: 205
Registriert: 11.06.2013, 19:54

Re: HB-RF-MOD externe Antenne

Beitrag von RouvenE » 12.07.2019, 10:51

Da absolut nichts mehr lief bzw. auf die CCU reagierte, startete ich nach meinem Post eben die CCU neu... ups, hätte ich ggf abwarten sollen...

Die interessanteste Meldung jedenfalls müsste diese hier sein:

Code: Alles auswählen

[email protected]:~ $ sudo pivccu-attach cat /var/log/messages
Jul 12 10:29:36 piVCCU syslog.info syslogd started: BusyBox v1.29.2
Jul 12 10:29:36 piVCCU user.notice kernel: klogd started: BusyBox v1.29.2 (2019-06-21 09:16:48 CEST)
Jul 12 10:29:38 piVCCU syslog.info syslogd exiting
Jul 12 10:29:38 ccu3-webui syslog.info syslogd started: BusyBox v1.29.2
Jul 12 10:29:38 ccu3-webui user.notice kernel: klogd started: BusyBox v1.29.2 (2019-06-21 09:16:48 CEST)
Jul 12 10:29:38 ccu3-webui daemon.err udhcpc[170]: started, v1.29.2
Jul 12 10:29:38 ccu3-webui daemon.err udhcpc[170]: sending discover
Jul 12 10:29:38 ccu3-webui daemon.err udhcpc[170]: sending select for 192.168.178.38
Jul 12 10:29:38 ccu3-webui daemon.err udhcpc[170]: lease of 192.168.178.38 obtained, lease time 864000
Jul 12 10:29:39 ccu3-webui user.info firewall: iptables v1.6.2: invalid port/service `310000' specified Try `iptables -h' or 'iptables --help' for more information.
Jul 12 10:29:39 ccu3-webui user.info firewall: ip6tables v1.6.2: invalid port/service `310000' specified Try `ip6tables -h' or 'ip6tables --help' for more information.
Jul 12 10:29:39 ccu3-webui user.info firewall: configuration set
Jul 12 10:29:39 ccu3-webui daemon.info ifplugd(eth0)[271]: ifplugd 0.28 initializing.
Jul 12 10:29:39 ccu3-webui daemon.info ifplugd(eth0)[271]: Using interface eth0/CA:2F:E5:BF:CD:AD with driver <veth> (version: 1.0)
Jul 12 10:29:39 ccu3-webui daemon.info ifplugd(eth0)[271]: Using detection mode: SIOCETHTOOL
Jul 12 10:29:39 ccu3-webui daemon.info ifplugd(eth0)[271]: Initialization complete, link beat detected.
Jul 12 10:29:39 ccu3-webui daemon.warn ifplugd(eth0)[271]: Could not open /dev/tty, cannot beep.
Jul 12 10:29:39 ccu3-webui daemon.info ifplugd(eth0)[271]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Jul 12 10:29:39 ccu3-webui daemon.warn ifplugd(eth0)[271]: client: ifup: interface eth0 already configured
Jul 12 10:29:39 ccu3-webui daemon.info ifplugd(eth0)[271]: Program executed successfully.
Jul 12 10:29:49 ccu3-webui daemon.notice ntpdate[279]: step time server 131.188.3.220 offset -0.001225 sec
Jul 12 10:29:49 ccu3-webui daemon.notice ntpd[280]: ntpd [email protected] Fri Jun 21 07:15:18 UTC 2019 (1): Starting
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[280]: Command line: /usr/sbin/ntpd -g 0.de.pool.ntp.org 1.de.pool.ntp.org 2.de.pool.ntp.org 3.de.pool.ntp.org
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: proto: precision = 0.416 usec (-21)
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen and drop on 0 v6wildcard [::]:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen normally on 2 lo 127.0.0.1:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen normally on 3 eth0 192.168.178.38:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen normally on 4 lo [::1]:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen normally on 5 eth0 [fd00::c82f:e5ff:febf:cdad]:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen normally on 6 eth0 [2003:d0:bf43:1200:c82f:e5ff:febf:cdad]:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listening on routing socket on fd #23 for interface updates
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: kernel reports TIME_ERROR: 0x2041: Clock Unsynchronized
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: kernel reports TIME_ERROR: 0x2041: Clock Unsynchronized
Jul 12 10:29:49 ccu3-webui daemon.err xinetd[302]: Unable to read included directory: /etc/config/xinetd.d [file=/etc/xinetd.conf] [line=14]
Jul 12 10:29:49 ccu3-webui daemon.crit xinetd[302]: 302 {init_services} no services. Exiting...
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: write_pid /var/run/cuxd.pid [337]
Jul 12 10:29:49 ccu3-webui user.info homematic: started cux-daemon
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: CUx-Daemon(2.1.0) on CCU(3.47.10) start PID:337
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:1166 update(-193s):Fri Jul 12 10:26:36 2019
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: 2 device-paramset(s) loaded ok!
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: write_proxy /var/cache/cuxd_proxy.ini (337 /usr/local/addons/cuxd/ 2.1.0 3.47.10 0)
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: add interface 'CUxD'
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: write interface(1) 'BidCos-RF' to /usr/local/etc/config/InterfacesList.xml
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: write interface(2) 'VirtualDevices' to /usr/local/etc/config/InterfacesList.xml
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: write interface(3) 'HmIP-RF' to /usr/local/etc/config/InterfacesList.xml
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: write interface(4) 'CUxD' to /usr/local/etc/config/InterfacesList.xml
Jul 12 10:29:49 ccu3-webui user.info root: Updating RF Lan Gateway Coprocessor Firmware
Jul 12 10:29:49 ccu3-webui user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Jul 12 10:29:49 ccu3-webui user.info root: Updating RF Lan Gateway Firmware
Jul 12 10:29:49 ccu3-webui user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Jul 12 10:29:50 ccu3-webui user.info kernel: [   42.033280] eq3loop: created slave mmd_hmip
Jul 12 10:29:50 ccu3-webui user.info kernel: [   42.033565] eq3loop: created slave mmd_bidcos
Jul 12 10:29:52 ccu3-webui user.info kernel: [   44.115844] eq3loop: eq3loop_open_slave() mmd_bidcos
Jul 12 10:30:05 ccu3-webui user.info kernel: [   57.116495] eq3loop: eq3loop_close_slave() mmd_hmip
Jul 12 10:30:05 ccu3-webui user.info kernel: [   57.119642] eq3loop: eq3loop_close_slave() mmd_hmip
Jul 12 10:30:05 ccu3-webui user.info kernel: [   57.130036] eq3loop: eq3loop_open_slave() mmd_hmip
Jul 12 10:30:14 ccu3-webui daemon.warn cuxd[337]: process_rpc_request(127.0.0.1) - illegal XMLRPC(listDevices) request
Jul 12 10:30:16 ccu3-webui daemon.warn cuxd[337]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
Jul 12 10:30:27 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00091569927D28:1","MOTION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: MOTION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00091569927D28:1","MOTION"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:27 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00155993965711:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00155993965711:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:27 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0000D7099A47AA:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"0000D7099A47AA:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:27 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0000D3C98C9D70:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"0000D3C98C9D70:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:27 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001559939646E5:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"001559939646E5:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:28 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00155993965468:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00155993965468:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:28 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A55699D7280:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000A55699D7280:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:28 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A55699D76C3:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000A55699D76C3:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:28 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A55699D748B:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000A55699D748B:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:28 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A55699D74E6:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000A55699D74E6:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:36 ccu3-webui daemon.info cuxd[337]: INIT 'xmlrpc_bin://127.0.0.1:31999' '1783'
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","SET_POINT_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SET_POINT_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","SET_POINT_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","ACTUAL_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTUAL_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","ACTUAL_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","ACTIVE_PROFILE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTIVE_PROFILE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","ACTIVE_PROFILE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","WINDOW_STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: WINDOW_STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","WINDOW_STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","SET_POINT_MODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SET_POINT_MODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","SET_POINT_MODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","PARTY_TIME_START"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","PARTY_TIME_START"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","PARTY_TIME_END"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","PARTY_TIME_END"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","PARTY_SET_POINT_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POINT_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","PARTY_SET_POINT_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","PARTY_MODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_MODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","PARTY_MODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","SET_POINT_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SET_POINT_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","SET_POINT_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","ACTUAL_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTUAL_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","ACTUAL_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","ACTIVE_PROFILE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTIVE_PROFILE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","ACTIVE_PROFILE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","WINDOW_STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: WINDOW_STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","WINDOW_STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","SET_POINT_MODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SET_POINT_MODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","SET_POINT_MODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","PARTY_TIME_START"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","PARTY_TIME_START"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","PARTY_TIME_END"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","PARTY_TIME_END"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","PARTY_SET_POINT_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POINT_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","PARTY_SET_POINT_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","PARTY_MODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_MODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","PARTY_MODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","SET_POINT_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SET_POINT_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","SET_POINT_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","ACTUAL_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTUAL_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","ACTUAL_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","ACTIVE_PROFILE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTIVE_PROFILE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","ACTIVE_PROFILE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","WINDOW_STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: WINDOW_STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","WINDOW_STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","SET_POINT_MODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SET_POINT_MODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","SET_POINT_MODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","PARTY_TIME_START"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","PARTY_TIME_START"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","PARTY_TIME_END"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","PARTY_TIME_END"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","PARTY_SET_POINT_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POINT_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","PARTY_SET_POINT_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","PARTY_MODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_MODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","PARTY_MODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]

Code: Alles auswählen

[email protected]:~ $ sudo pivccu-info
piVCCU version: 3.47.10-28
Kernel modules: Available
Raw UART dev:   Available
Rasp.Pi3 UART:  Assigned to GPIO pins
HMRF Hardware:  RPI-RF-MOD
HMIP Hardware:  RPI-RF-MOD
Board serial:   58A992FFC6
Radio MAC:      unknown
SGTIN:          3014F711A0001F58A992FFC6
State:          RUNNING
PID:            954
IP:             192.168.178.38
IP:             2003:d0:bf43:1200:c82f:e5ff:febf:cdad
IP:             fd00::c82f:e5ff:febf:cdad
CPU use:        40.02 seconds
BlkIO use:      51.02 MiB
Memory use:     158.91 MiB
KMem use:       5.27 MiB
Link:           vethpivccu
 TX bytes:      1.60 MiB
 RX bytes:      1.80 MiB
 Total bytes:   3.40 MiB

Code: Alles auswählen

[email protected]:~ $ sudo pivccu-attach cat /var/log/hmserver.log
Jul 12 10:29:57 de.eq3.lib.util.dynamics.GenericFactory INFO  [main] @GenericFactory 
Jul 12 10:29:57 de.eq3.lib.util.dynamics.GenericFactory INFO  [main] created instance of HMServerConfiguration with parameter(s) 
Jul 12 10:29:57 de.eq3.lib.util.dynamics.GenericFactory INFO  [main] passed 1 parameter(s), in declarative order [String] 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [HMIPTRXWriterWorker] (1) *worker 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [KeyServerWorker] (1) *worker 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [KryoPersistenceWorker] (1) *worker 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [TransactionSubsystemHandler] (1) *worker 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [FirmwareLoaderFileSystem] (1) *worker 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerPersistentDataLoader] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerAdapterInitialization] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [BackendCommandHandler] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceInclusionAcceptHandler] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [CheckDeviceExistHandler] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [IncomingHMIPFrameHandler] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceBackgroundUpdateSubsystem] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceLiveUpdateSubsystem] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [DeviceInclusionDefaultConfigurationChanger] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [CyclicSmokeDetectorAwakening] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [AccessPointElectroCardioGram] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LocalServerFirmwareUpdateInitialization] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [AccessPointAuthorisationHandler] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [AccessPointMessageDispatcher] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [AccessPointWatchdog] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [WebSocketManager] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [AccessPointCommDevice] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [RouterKeyServerWorker] (1) *worker 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [AccessPointKeyServerWorker] (1) *worker 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [RemoteCommAdapterInitialization] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [RemoteCommAdapterFinalization] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LanRoutingWorker] (1) *worker 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyNotificationHandler] (1) *worker 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyAPIWorker] (1) *worker 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyBackendNotificationHandler] (3) *worker 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyBlindLevelCorrectionHandler] (1) *worker 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: added for deployment [LegacyInitializion] (1)  
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: deploying 32 classes to Vert.x 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: 32 VertxDeployers initialized 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of CyclicSmokeDetectorAwakening succeeded (6457c7f6-af67-4a4a-a1a1-a8e7c6a5a175) 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of TransactionSubsystemHandler succeeded (d3203af3-a5b6-4995-aca9-3dff1b072ec8) 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of AccessPointKeyServerWorker succeeded (632d5820-7952-4e74-9cf4-9e0f23d44673) 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of LegacyBlindLevelCorrectionHandler succeeded (d0ec85ad-09e5-44d9-96de-0a48ae6f9ddc) 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of AccessPointElectroCardioGram succeeded (40de1d09-fbb3-40cc-9284-b4e7ce70dc68) 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of DeviceInclusionDefaultConfigurationChanger succeeded (b19baefe-1f9c-45f7-9603-f160871fb0ed) 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of CheckDeviceExistHandler succeeded (3a668bd5-1307-41ee-a008-8d41af6c0801) 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of HMIPTRXWriterWorker succeeded (a21c2dd3-43bf-48f2-ac53-fbfca039eefb) 
Jul 12 10:30:03 de.eq3.cbcs.lib.remotecommadapter.device.security.RouterKeyServerWorker ERROR [vert.x-worker-thread-2] Missing key server configuration parameter (Network.Key) for  mode: KEYSERVER_LOCAL 
Jul 12 10:30:03 de.eq3.cbcs.server.core.vertx.KeyServerWorker ERROR [vert.x-worker-thread-0] Missing key server configuration parameter (Network.Key) for  mode: KEYSERVER_LOCAL 
Jul 12 10:30:03 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of RouterKeyServerWorker succeeded (2ce08234-20f9-4971-ac96-03a7cdeb6d13) 
Jul 12 10:30:04 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of KryoPersistenceWorker succeeded (cada1831-fd62-4153-bd9d-7e77e4dacb66) 
Jul 12 10:30:04 de.eq3.cbcs.server.core.live_otau.DeviceLiveUpdateSubsystem INFO  [vert.x-eventloop-thread-3] SYSTEM: DeviceLiveUpdateSubsystem started 
Jul 12 10:30:04 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of KeyServerWorker succeeded (cedad6d2-67ec-426d-b19a-1d0f46951f72) 
Jul 12 10:30:04 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of LocalServerPersistentDataLoader succeeded (a1612a59-7a05-4912-9f09-46368248ae3f) 
Jul 12 10:30:04 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of DeviceLiveUpdateSubsystem succeeded (6b663a18-0ab5-497f-98f0-e036b136331b) 
Jul 12 10:30:04 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of DeviceBackgroundUpdateSubsystem succeeded (ef41aab8-b34f-4255-857e-1580b49128af) 
Jul 12 10:30:05 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-7] SYSTEM: start of LocalServerAdapterInitialization succeeded (1ebdb55a-3dc9-4868-8d52-03d4a4af557c) 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] TRX adapter state 1: HMIP_TRX_App 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] TRX adapter application is already running or started 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] No NWK, try to set address ... 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Try to set radio address 12198934... 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Set max send attempts for 3014F711A0001F58A992FFC6 to 3 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Try to get application version... 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Application version 4.0.20 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Bootloader version 1.0.1 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] hmos version 1.40.1 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] MCU type: CC1310 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Duty Cycle: 0.0 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] set DutyCycle limit to ffffffc8 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Set Duty Cycle Limit 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Current Security Counter: 69800193 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Update security counter to calculation: 70036260 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] TRX adapter has 1 link partners 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO  [Thread-6] Adapter with Access Point id 3014F711A0001F58A992FFC6 initialized 
Jul 12 10:30:05 de.eq3.cbcs.server.local.base.internal.LocalServerAdapterInitialization INFO  [Thread-6] HMIPTRXInitialResponseListener said that Adapter was initialized 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of AccessPointMessageDispatcher succeeded (0f9e8bc9-177e-4c3b-a261-8ca86d8de3e7) 
Jul 12 10:30:06 de.eq3.cbcs.server.core.otau.util.FirmwareLoaderFileSystem INFO  [vert.x-worker-thread-1] SYSTEM: Firmware update directory is set to /etc/config/firmware 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of FirmwareLoaderFileSystem succeeded (cf1b97ed-cefd-4224-ac05-7aea260cae56) 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of RemoteCommAdapterInitialization succeeded (a54e3655-c82c-4c64-b17e-2ffce86351b2) 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of WebSocketManager succeeded (f05dd920-d548-4cc7-b259-c958d687a89a) 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of LocalServerFirmwareUpdateInitialization succeeded (0a45951d-41b1-49d6-b715-a3bcc5606bdb) 
Jul 12 10:30:06 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-2] SYSTEM: Checking all devices on all accesspoints for updates 
Jul 12 10:30:06 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-2] SYSTEM: There are 0 APs queued with updatable devices (RF) 
Jul 12 10:30:06 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-2] SYSTEM: There are 0 APs queued with updatable devices (WIRED) 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of DeviceInclusionAcceptHandler succeeded (f7401529-0af0-4984-9721-d1bbce76a83c) 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of BackendCommandHandler succeeded (838c3a30-eec2-426a-a31b-c1560f97fe1a) 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of AccessPointAuthorisationHandler succeeded (65dbc122-f15e-4592-a915-fd553652c48c) 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of AccessPointWatchdog succeeded (3e86ebb0-3940-4fec-9bee-b48d3a5e61f5) 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of IncomingHMIPFrameHandler succeeded (0993a714-0d32-4be7-b433-471bb1624d54) 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of LegacyBackendNotificationHandler succeeded (f502090b-613f-44ad-b620-9e2aac7925b3) 
Jul 12 10:30:06 de.eq3.cbcs.lib.lanrouting.UdpServer INFO  [vert.x-worker-thread-3] UDP Routing configuration: trying to bind port 43438 on eth0 0.0.0.0 -> 192.168.178.38 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of LegacyAPIWorker succeeded (a6b36927-f49c-462d-b50e-b2278ab2eefc) 
Jul 12 10:30:06 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of LegacyNotificationHandler succeeded (85b0797d-06a0-493e-ad7a-51c36338b7cd) 
Jul 12 10:30:07 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of LanRoutingWorker succeeded (d7ff2228-b36b-4a96-b675-7dda88feb6a8) 
Jul 12 10:30:07 de.eq3.cbcs.lib.lanrouting.UdpServer INFO  [vert.x-worker-thread-2] UDP Routing established on network interface eth0 : 0.0.0.0 (192.168.178.38) 
Jul 12 10:30:07 de.eq3.cbcs.lib.hmiptrxcommadapter.internal.RoutingSubsystem WARN  [Thread-6] Received routing key D7AC9A2C6B8133AB48CBE1D9284DC570 
Jul 12 10:30:07 de.eq3.cbcs.lib.lanrouting.UdpServer INFO  [vert.x-worker-thread-4] UDP Routing multi cast established on network interface eth0 : 192.168.178.38 
Jul 12 10:30:07 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of AccessPointCommDevice succeeded (cb5a2733-4875-4e54-8c5c-128b951bd9ea) 
Jul 12 10:30:07 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of LegacyInitializion succeeded (f0fb79d5-517e-41f7-8bfd-bef017372e29) 
Jul 12 10:30:09 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-6] SYSTEM: start of RemoteCommAdapterFinalization succeeded (575a5c73-4be7-48bc-94cc-5d7d28e9a256) 
Jul 12 10:30:09 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-0] SYSTEM: initial deployment complete _____________________________________________________ 
Jul 12 10:30:10 de.eq3.cbcs.server.local.LocalServer INFO  [Thread-0] SYSTEM: Bind XML-RPC api to port 32010 
Jul 12 10:30:10 de.eq3.cbcs.lib.remotecommadapter.AccessPointCommDevice INFO  [vert.x-eventloop-thread-3] SYSTEM: Started Access Point WebSocket server with port 9293 
Jul 12 10:30:10 de.eq3.cbcs.lib.remotecommadapter.AccessPointCommDevice INFO  [vert.x-eventloop-thread-3] SYSTEM: connector open 
Jul 12 10:30:12 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Default MaxEventLoopExecuteTime: 2000000000 
Jul 12 10:30:12 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Default BlockedThreadCheckInterval: 1000 
Jul 12 10:30:12 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Default MaxWorkerExecuteTime: 60000000000 
Jul 12 10:30:12 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Default EventLoopPoolSize: 8 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [BackendWorker] (1) *worker 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [GroupRequestWorker] (1) *worker 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [DiagramRequestWorker] (1) *worker 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [StorageRequestWorker] (1) *worker 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [DeviceFirmwareRequestWorker] (1) *worker 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [EnergyPriceRequestWorker] (1) *worker 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [CouplingRequestWorker] (1) *worker 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [RegaClientWorker] (1) *worker 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [GroupConfigurationPersistenceFileSystem] (1) *worker 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: added for deployment [HmIPGatewayManagementRequestWorker] (1) *worker 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: deploying 10 classes to Vert.x 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: 10 VertxDeployers initialized 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of BackendWorker succeeded (458e0be7-e9fb-4293-87a4-6560868612c3) 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of CouplingRequestWorker succeeded (561e2056-2643-4f7c-babe-2697f9e8c4d8) 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-0] SYSTEM: start of EnergyPriceRequestWorker succeeded (1366b106-643b-4817-93f9-02e392869ae1) 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-5] SYSTEM: start of StorageRequestWorker succeeded (106b13b5-e130-49cf-bfbd-7583c9348f65) 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-3] SYSTEM: start of GroupConfigurationPersistenceFileSystem succeeded (d49b0cf7-3791-439b-bee5-a54b275d41cd) 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of RegaClientWorker succeeded (ed204aba-3a9f-495b-a07f-2eefeee5d3c7) 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-1] SYSTEM: start of GroupRequestWorker succeeded (dacb16bd-e033-43cd-b2d2-0edeab3b0f09) 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of DiagramRequestWorker succeeded (42609567-fabb-49dc-aa1a-8cc2a84a90db) 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-4] SYSTEM: start of DeviceFirmwareRequestWorker succeeded (540eee1e-e967-47ba-a605-a053750a3b79) 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [vert.x-eventloop-thread-2] SYSTEM: start of HmIPGatewayManagementRequestWorker succeeded (ad875bec-30c4-4fb9-a744-96918c452e04) 
Jul 12 10:30:12 de.eq3.cbcs.vertx.management.VertxManager INFO  [Thread-1] SYSTEM: initial deployment complete _____________________________________________________ 
Jul 12 10:30:12 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Starting HMServer at 127.0.0.1:39292 
Jul 12 10:30:12 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Read Configuration 
Jul 12 10:30:13 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create Bidcos Dispatcher 
Jul 12 10:30:13 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] InitBidCosCache 
Jul 12 10:30:14 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create groupDefinitionProvider 
Jul 12 10:30:14 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create VirtualDeviceHolder 
Jul 12 10:30:14 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create VirtualDeviceHandlerRega 
Jul 12 10:30:14 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create GroupAdministrationService 
Jul 12 10:30:14 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create GroupDeviceDispatcher 
Jul 12 10:30:14 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create GroupDeviceHandler 
Jul 12 10:30:15 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-1] @GroupDeviceHandler - initializing... 
Jul 12 10:30:15 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-1] --> created groupDeviceDispatcher (GroupDeviceService to BidCoS (via Dispatcher)) 
Jul 12 10:30:15 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-1] --> created virtualDeviceHandler (GroupDeviceService to ReGa) 
Jul 12 10:30:15 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO  [Thread-1] --> got groupDefinitionProvider 
Jul 12 10:30:15 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create BidCosGroupMemberProvider 
Jul 12 10:30:15 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Init groupAdministrationService 
Jul 12 10:30:15 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Init Virtual OS Device 
Jul 12 10:30:15 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Init ESHLight Bridge 
Jul 12 10:30:16 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler INFO  [safeCall-2] Polling interval not configured for this hue bridge. Using default value: 10s 
Jul 12 10:30:16 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create RrdDatalogging 
Jul 12 10:30:16 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create MeasurementService 
Jul 12 10:30:16 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Init MeasurementService 
Jul 12 10:30:16 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create HTTP Server 
Jul 12 10:30:16 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create BidCos context and start handler 
Jul 12 10:30:16 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Create group context and start handler 
Jul 12 10:30:16 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-4] (un)registerCallback on LegacyServiceHandler called from url: http://127.0.0.1:39292/bidcos 
Jul 12 10:30:16 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-4] init finished 
Jul 12 10:30:16 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO  [vert.x-worker-thread-0] Added InterfaceId: HmIP-RF_java 
Jul 12 10:30:16 de.eq3.cbcs.legacy.bidcos.rpc.internal.DeviceUtil INFO  [vert.x-worker-thread-0] updateDevicesForClient HmIP-RF_java -> 183 device addresses will be added 
Jul 12 10:30:17 de.eq3.ccu.server.BaseHMServer INFO  [Thread-1] Starting HMServer done 
Jul 12 10:30:17 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-1] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:30:17 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-1] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:30:26 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO  [vert.x-eventloop-thread-4] (un)registerCallback on VirtualDeviceHandlerRega called from url: xmlrpc_bin://127.0.0.1:31999 
Jul 12 10:30:26 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO  [vert.x-eventloop-thread-4] Added InterfaceId: 1008 
Jul 12 10:30:26 de.eq3.ccu.virtualdevice.service.internal.rega.BackendWorker INFO  [vert.x-worker-thread-13] Execute BackendCommand: de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand 
Jul 12 10:30:26 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] updateDevicesForClient -> 1 device addresses will be deleted 
Jul 12 10:30:26 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] updateDevicesForClient -> 39 device addresses will be added 
Jul 12 10:30:27 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-1] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:30:27 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-1] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:30:36 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-1] (un)registerCallback on LegacyServiceHandler called from url: xmlrpc_bin://127.0.0.1:31999 
Jul 12 10:30:36 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO  [vert.x-worker-thread-1] init finished 
Jul 12 10:30:36 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO  [vert.x-worker-thread-0] Added InterfaceId: 1009 
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-Hue beyond  
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-Hue beyon01 
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-Buntlampe 
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-lightstrip 
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-Tradfri Flu 
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-Schranklamp 
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-Hue white B 
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-Philips hue 
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-Stehlampe 
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-Bürovitrin 
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-Hue beyon02 
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-Hue beyon03 
Jul 12 10:30:37 de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand INFO  [vert.x-worker-thread-13] set ready config of HU-Fado 
Jul 12 10:30:38 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-2] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:30:38 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-2] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:30:48 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-1] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:30:48 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-1] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:30:58 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:30:58 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:31:09 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:31:09 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:31:19 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-4] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:31:19 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-4] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:31:29 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-4] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:31:29 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-4] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:31:40 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-5] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:31:40 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-5] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:31:50 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-5] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:31:50 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-5] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:32:00 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:32:00 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:32:10 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-4] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:32:10 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-4] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:32:21 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-5] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:32:21 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-5] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:32:31 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-5] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:32:31 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-5] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:32:41 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:32:41 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:32:52 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:32:52 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:33:02 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:33:02 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:33:12 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-5] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:33:12 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-5] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:33:23 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-5] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:33:23 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-5] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:33:33 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:33:33 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:33:43 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:33:43 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:33:54 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:33:54 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:34:04 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:34:04 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:34:14 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:34:14 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:34:25 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:34:25 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:34:35 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:34:35 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-3] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:34:45 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-11] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:34:45 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-11] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:34:55 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-12] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:34:55 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-12] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:35:04 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-2] SYSTEM: 0 Accesspoints in Queue 
Jul 12 10:35:04 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-2] SYSTEM: Permanent-/Burstlistener Handler utilization: 0/50 used 
Jul 12 10:35:04 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-2] SYSTEM: Eventlistener Handler utilization: 0/50 used 
Jul 12 10:35:06 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-12] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:35:06 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-12] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:35:16 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:35:16 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:35:26 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:35:26 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:35:37 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-14] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:35:37 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-14] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:35:47 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-14] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:35:47 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-14] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:35:57 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-12] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:35:57 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-12] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:36:08 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:36:08 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:36:18 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:36:18 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:36:28 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:36:28 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:36:39 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:36:39 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:36:49 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:36:49 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:36:59 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:36:59 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:37:10 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:37:10 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:37:20 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:37:20 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:37:30 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:37:30 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-13] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:37:41 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:37:41 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:37:51 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:37:51 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:38:01 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:38:01 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:38:12 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:38:12 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:38:22 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:38:22 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:38:32 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:38:32 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:38:42 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:38:42 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:38:53 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:38:53 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:39:03 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:39:03 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:39:13 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:39:13 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:39:24 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:39:24 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:39:34 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:39:34 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:39:44 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:39:44 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:39:55 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:39:55 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:40:04 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-2] SYSTEM: 0 Accesspoints in Queue 
Jul 12 10:40:04 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-2] SYSTEM: Permanent-/Burstlistener Handler utilization: 0/50 used 
Jul 12 10:40:04 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-2] SYSTEM: Eventlistener Handler utilization: 0/50 used 
Jul 12 10:40:05 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:40:05 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:40:06 de.eq3.cbcs.lib.remotecommadapter.device.service.AccessPointWatchdog INFO  [vert.x-eventloop-thread-4] SYSTEM: Access Point Watchdog running periodic connection check... 
Jul 12 10:40:15 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:40:15 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:40:26 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:40:26 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:40:36 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:40:36 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:40:46 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:40:46 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:40:57 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:40:57 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:41:07 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:41:07 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:41:17 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:41:17 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:41:28 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:41:28 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:41:38 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:41:38 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:41:48 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:41:48 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:41:58 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:41:58 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:42:09 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:42:09 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:42:19 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:42:19 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:42:29 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:42:29 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:42:40 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:42:40 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:42:50 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:42:50 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:43:00 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:43:00 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:43:11 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:43:11 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:43:21 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:43:21 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:43:31 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:43:31 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-20] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:43:42 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:43:42 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:43:52 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:43:52 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:44:02 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:44:02 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:44:13 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:44:13 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:44:23 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:44:23 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:44:33 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:44:33 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:44:44 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:44:44 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-18] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:44:54 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:44:54 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-17] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:45:04 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:45:04 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:45:04 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-2] SYSTEM: 0 Accesspoints in Queue 
Jul 12 10:45:04 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-2] SYSTEM: Permanent-/Burstlistener Handler utilization: 0/50 used 
Jul 12 10:45:04 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO  [vert.x-eventloop-thread-2] SYSTEM: Eventlistener Handler utilization: 0/50 used 
Jul 12 10:45:14 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:45:14 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:45:25 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:45:25 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:45:26 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO  [vert.x-eventloop-thread-4] getDeviceDescription: Found no matching device description for address HU-Hue beyond 
Jul 12 10:45:26 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO  [vert.x-eventloop-thread-4] getDeviceDescription: Found no matching device description for address HU-Hue beyond 
Jul 12 10:45:26 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO  [vert.x-eventloop-thread-4] getDeviceDescription: Found no matching device description for address HU-Hue beyond 
Jul 12 10:45:35 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:45:35 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:45:45 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:45:45 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:45:56 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:45:56 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:46:06 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:46:06 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-30] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:46:16 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-33] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:46:16 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-33] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:46:27 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-34] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:46:27 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-34] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:46:37 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-34] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:46:37 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-34] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:46:47 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-34] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:46:47 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-34] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:46:58 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-34] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:46:58 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-34] Please configure a valid user or remove user from configuration to generate a new one. 
Jul 12 10:47:08 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-36] User 0NUqTF9myhAVu4mLgB2QmPgHM9-F9Te8Eubjj4r0 is not authenticated on Hue bridge 192.168.178.31 
Jul 12 10:47:08 org.eclipse.smarthome.binding.hue.handler.HueBridgeHandler WARN  [ESH-thingHandler-36] Please configure a valid user or remove user from configuration to generate a new one. 
In der letzten Ausgabe entstanden die hue-Fehler wohl aufgrund eines geänderten Passworts. Das muss ich eben korrigieren.

deimos
Beiträge: 3049
Registriert: 20.06.2017, 10:38
Wohnort: Leimersheim
Hat sich bedankt: 11 Mal
Danksagung erhalten: 55 Mal
Kontaktdaten:

Re: HB-RF-MOD externe Antenne

Beitrag von deimos » 12.07.2019, 10:59

Hi,

die Logs bringen nach einem Neustart nichts mehr, da sie nicht persistent sind, sondern nur im RAM gehalten werden.

Viele Grüße
Alex

RouvenE
Beiträge: 205
Registriert: 11.06.2013, 19:54

Re: HB-RF-MOD externe Antenne

Beitrag von RouvenE » 12.07.2019, 20:11

Nun ist es wieder geschehen - das Modul leuchtet nicht mehr blau... die CCU3 beschwert sich nicht, Veränderungen der Aktoren werden durch die CCU nicht registriert...

Ich führe nun die einzelnen "Tests" durch:

Code: Alles auswählen

[email protected]:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.19.42-v7+ ([email protected]) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1219 SMP Tue May 14 21:20:58 BST 2019
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 8 MiB at 0x3ac00000
[    0.000000] On node 0 totalpages: 242688
[    0.000000]   Normal zone: 2133 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 242688 pages, LIFO batch:63
[    0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0
[    0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632
[    0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=tty1 root=PARTUUID=17fc48fb-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 939084K/970752K available (8192K kernel code, 627K rwdata, 2164K rodata, 1024K init, 821K bss, 23476K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
                   lowmem  : 0x80000000 - 0xbb400000   ( 948 MB)
                   modules : 0x7f000000 - 0x80000000   (  16 MB)
                     .text : 0x(ptrval) - 0x(ptrval)   (9184 kB)
                     .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
                     .data : 0x(ptrval) - 0x(ptrval)   ( 628 kB)
                      .bss : 0x(ptrval) - 0x(ptrval)   ( 822 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 26229 entries in 77 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000010] Switching to timer-based delay loop, resolution 52ns
[    0.000142] Console: colour dummy device 80x30
[    0.000409] console [tty1] enabled
[    0.000441] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000461] pid_max: default: 32768 minimum: 301
[    0.000630] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000647] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001128] CPU: Testing write buffer coherency: ok
[    0.001395] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001725] Setting up static identity map for 0x100000 - 0x10003c
[    0.001803] rcu: Hierarchical SRCU implementation.
[    0.002190] smp: Bringing up secondary CPUs ...
[    0.002625] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.003079] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.003488] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.003541] smp: Brought up 1 node, 4 CPUs
[    0.003578] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.003588] CPU: All CPU(s) started in HYP mode.
[    0.003597] CPU: Virtualization extensions available.
[    0.004123] devtmpfs: initialized
[    0.009395] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.009530] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.009553] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.009864] pinctrl core: initialized pinctrl subsystem
[    0.010344] NET: Registered protocol family 16
[    0.011833] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.014384] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.014402] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.014525] Serial: AMBA PL011 UART driver
[    0.015545] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.030945] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[    0.031719] SCSI subsystem initialized
[    0.031832] usbcore: registered new interface driver usbfs
[    0.031865] usbcore: registered new interface driver hub
[    0.031918] usbcore: registered new device driver usb
[    0.050048] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:45, variant start
[    0.060226] raspberrypi-firmware soc:firmware: Firmware hash is 2e98b31d18547962e564bdf88e57b3df7085c29b
[    0.070807] clocksource: Switched to clocksource arch_sys_counter
[    0.110429] VFS: Disk quotas dquot_6.6.0
[    0.110488] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.110603] FS-Cache: Loaded
[    0.110727] CacheFiles: Loaded
[    0.115146] NET: Registered protocol family 2
[    0.115542] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.115572] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.115629] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.115717] TCP: Hash tables configured (established 8192 bind 8192)
[    0.115801] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.115832] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.115999] NET: Registered protocol family 1
[    0.116323] RPC: Registered named UNIX socket transport module.
[    0.116335] RPC: Registered udp transport module.
[    0.116344] RPC: Registered tcp transport module.
[    0.116353] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.117166] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.118617] Initialise system trusted keyrings
[    0.118731] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.123126] FS-Cache: Netfs 'nfs' registered for caching
[    0.123408] NFS: Registering the id_resolver key type
[    0.123433] Key type id_resolver registered
[    0.123442] Key type id_legacy registered
[    0.123457] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.124531] Key type asymmetric registered
[    0.124546] Asymmetric key parser 'x509' registered
[    0.124578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.124669] io scheduler noop registered
[    0.124679] io scheduler deadline registered (default)
[    0.124771] io scheduler cfq registered
[    0.124781] io scheduler mq-deadline registered (default)
[    0.124792] io scheduler kyber registered
[    0.126084] BCM2708FB: allocated DMA memory 0xfad00000
[    0.126117] BCM2708FB: allocated DMA channel 0
[    0.131091] Console: switching to colour frame buffer device 82x26
[    0.134475] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.136226] bcm2835-rng 3f104000.rng: hwrng registered
[    0.137277] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.139453] vc-sm: Videocore shared memory driver
[    0.140592] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    0.147451] brd: module loaded
[    0.153407] loop: module loaded
[    0.154444] Loading iSCSI transport class v2.0-870.
[    0.155845] libphy: Fixed MDIO Bus: probed
[    0.156884] usbcore: registered new interface driver lan78xx
[    0.157891] usbcore: registered new interface driver smsc95xx
[    0.158856] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.187552] dwc_otg 3f980000.usb: base=(ptrval)
[    0.388642] Core Release: 2.80a
[    0.389618] Setting default values for core params
[    0.390624] Finished setting default values for core params
[    0.591771] Using Buffer DMA mode
[    0.592785] Periodic Transfer Interrupt Enhancement - disabled
[    0.593820] Multiprocessor Interrupt Enhancement - disabled
[    0.594850] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.595862] Dedicated Tx FIFOs mode
[    0.597071] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = bad14000 dma = 0xfad14000 len=9024
[    0.599047] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    0.603751] dwc_otg: Microframe scheduler enabled
[    0.603779] WARN::hcd_init_fiq:457: FIQ on core 1
[    0.604742] WARN::hcd_init_fiq:458: FIQ ASM at 8064b6dc length 36
[    0.605697] WARN::hcd_init_fiq:484: MPHI regs_base at f0006000
[    0.606690] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.607667] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.608665] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[    0.609671] Init: Port Power? op_state=1
[    0.610637] Init: Power Port (0)
[    0.611700] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.613644] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.614685] usb usb1: Product: DWC OTG Controller
[    0.615706] usb usb1: Manufacturer: Linux 4.19.42-v7+ dwc_otg_hcd
[    0.616752] usb usb1: SerialNumber: 3f980000.usb
[    0.618066] hub 1-0:1.0: USB hub found
[    0.619049] hub 1-0:1.0: 1 port detected
[    0.620265] dwc_otg: FIQ enabled
[    0.620267] dwc_otg: NAK holdoff enabled
[    0.620270] dwc_otg: FIQ split-transaction FSM enabled
[    0.620275] Module dwc_common_port init
[    0.620420] usbcore: registered new interface driver usb-storage
[    0.621510] mousedev: PS/2 mouse device common for all mice
[    0.622929] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.624115] bcm2835-cpufreq: min=1400000 max=1400000
[    0.625362] sdhci: Secure Digital Host Controller Interface driver
[    0.626411] sdhci: Copyright(c) Pierre Ossman
[    0.627639] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[    0.628913] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    0.630075] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.632302] ledtrig-cpu: registered to indicate activity on CPUs
[    0.633500] hidraw: raw HID events driver (C) Jiri Kosina
[    0.634723] usbcore: registered new interface driver usbhid
[    0.635870] usbhid: USB HID core driver
[    0.637371] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[    0.639484] [vc_sm_connected_init]: start
[    0.646495] [vc_sm_connected_init]: end - returning 0
[    0.648055] Initializing XFRM netlink socket
[    0.649115] NET: Registered protocol family 17
[    0.650214] Key type dns_resolver registered
[    0.651460] Registering SWP/SWPB emulation handler
[    0.652829] registered taskstats version 1
[    0.653879] Loading compiled-in X.509 certificates
[    0.659043] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 53, base_baud = 50000000) is a 16550
[    0.661711] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    0.662796] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    0.689477] sdhost: log_buf @ (ptrval) (fad13000)
[    0.726066] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    0.728597] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.731077] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.734707] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    0.738397] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    0.739896] of_cfs_init
[    0.740796] of_cfs_init: OK
[    0.741922] Waiting for root device PARTUUID=17fc48fb-02...
[    0.797496] mmc0: host does not support reading read-only switch, assuming write-enable
[    0.801904] mmc0: new high speed SDHC card at address 0001
[    0.803507] mmcblk0: mmc0:0001 JB1RT 29.8 GiB
[    0.805832]  mmcblk0: p1 p2
[    0.815088] random: fast init done
[    0.821581] mmc1: new high speed SDIO card at address 0001
[    0.831054] Indeed it is in host mode hprt0 = 00021501
[    0.903871] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    0.905682] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    0.907541] devtmpfs: mounted
[    0.911053] Freeing unused kernel memory: 1024K
[    0.912167] Run /sbin/init as init process
[    1.040841] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.041991] Indeed it is in host mode hprt0 = 00001101
[    1.280991] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[    1.283221] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.284741] hub 1-1:1.0: USB hub found
[    1.285962] hub 1-1:1.0: 4 ports detected
[    1.287730] systemd[1]: System time before build time, advancing clock.
[    1.414169] NET: Registered protocol family 10
[    1.416006] Segment Routing with IPv6
[    1.441062] random: systemd: uninitialized urandom read (16 bytes read)
[    1.444009] random: systemd: uninitialized urandom read (16 bytes read)
[    1.447802] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    1.451676] systemd[1]: Detected architecture arm.
[    1.464683] systemd[1]: Set hostname to <piVCCU>.
[    1.507963] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[    1.600854] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.731018] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[    1.733307] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.734823] hub 1-1.1:1.0: USB hub found
[    1.736024] hub 1-1.1:1.0: 3 ports detected
[    1.874210] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    1.877149] systemd[1]: Listening on Syslog Socket.
[    1.879778] systemd[1]: Listening on udev Kernel Socket.
[    1.882643] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.886514] systemd[1]: Listening on fsck to fsckd communication Socket.
[    1.889654] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.894005] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.050899] usb 1-1.1.2: new full-speed USB device number 4 using dwc_otg
[    2.209762] usb 1-1.1.2: New USB device found, idVendor=0403, idProduct=6f70, bcdDevice= 6.00
[    2.209771] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.209775] usb 1-1.1.2: Product: HB-RF-USB
[    2.209779] usb 1-1.1.2: Manufacturer: Alexander Reinert
[    2.209783] usb 1-1.1.2: SerialNumber: A93DI4TA
[    2.439137] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=30
[    2.491291] systemd-journald[98]: Received request to flush runtime journal from PID 1
[    2.510888] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg
[    2.641289] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[    2.641296] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.667750] generic_raw_uart: loading out-of-tree module taints kernel.
[    2.670778] usb 1-1.1.2: Found HB-RF-USB at usb-3f980000.usb-1.1.2
[    2.903636] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[    2.904144] libphy: lan78xx-mdiobus: probed
[    2.910528] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
[    2.962237] usbcore: registered new interface driver hb_rf_usb
[    3.000793] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    3.001845] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    3.001854] [vc_sm_connected_init]: start
[    3.003248] [vc_sm_connected_init]: installed successfully
[    3.063064] media: Linux media interface: v0.10
[    3.097713] videodev: Linux video capture interface: v2.00
[    3.124137] rtc-rx8130 1-0032: Unable to read registers #28..#30
[    3.124149] i2c i2c-1: probing for rx8130 failed
[    3.124168] rtc-rx8130: probe of 1-0032 failed with error -121
[    3.132386] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    3.135835] bcm2835_audio soc:audio: card created with 8 channels
[    3.155622] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    3.155629] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    3.169168] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    3.178403] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    3.182370] pl011_raw_uart 3f201000.serial: Initialized pl011 device; mapbase=0x3f201000; irq=81; clockrate=47999625
[    3.266212] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.294801] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.346700] brcmfmac: F1 signature read @0x18000000=0x15264345
[    3.351157] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    3.351615] usbcore: registered new interface driver brcmfmac
[    3.556581] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    3.573047] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[    3.597909] random: crng init done
[    3.597918] random: 7 urandom warning(s) missed due to ratelimiting
[    3.792001] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    3.792009] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    3.793801] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    3.793808] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    3.795894] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    3.795901] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    4.456230] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.474021] br0: port 1(eth0) entered blocking state
[    4.474034] br0: port 1(eth0) entered disabled state
[    4.474310] device eth0 entered promiscuous mode
[    4.486001] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[    6.529898] br0: port 1(eth0) entered blocking state
[    6.529904] br0: port 1(eth0) entered forwarding state
[    6.529994] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[    9.883065] raw-uart raw-uart: Reset radio module
[   10.384749] Bluetooth: Core ver 2.22
[   10.384836] NET: Registered protocol family 31
[   10.384839] Bluetooth: HCI device and connection manager initialized
[   10.384857] Bluetooth: HCI socket layer initialized
[   10.384865] Bluetooth: L2CAP socket layer initialized
[   10.384905] Bluetooth: SCO socket layer initialized
[   10.421507] Bluetooth: HCI UART driver ver 2.3
[   10.421513] Bluetooth: HCI UART protocol H4 registered
[   10.421556] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   10.421668] Bluetooth: HCI UART protocol Broadcom registered
[   11.072587] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.072594] Bluetooth: BNEP filters: protocol multicast
[   11.072608] Bluetooth: BNEP socket layer initialized
[   26.890964] br0: port 2(vethpivccu) entered blocking state
[   26.890974] br0: port 2(vethpivccu) entered disabled state
[   26.891274] device vethpivccu entered promiscuous mode
[   26.891612] IPv6: ADDRCONF(NETDEV_UP): vethpivccu: link is not ready
[   27.037399] eth0: renamed from veth2FTSVX
[   27.101880] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.104838] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   27.104990] IPv6: ADDRCONF(NETDEV_CHANGE): vethpivccu: link becomes ready
[   27.105069] br0: port 2(vethpivccu) entered blocking state
[   27.105074] br0: port 2(vethpivccu) entered forwarding state
[   42.033280] eq3loop: created slave mmd_hmip
[   42.033565] eq3loop: created slave mmd_bidcos
[   44.115844] eq3loop: eq3loop_open_slave() mmd_bidcos
[   57.116320] eq3loop: eq3loop_open_slave() mmd_hmip
[   57.116495] eq3loop: eq3loop_close_slave() mmd_hmip
[   57.119496] eq3loop: eq3loop_open_slave() mmd_hmip
[   57.119642] eq3loop: eq3loop_close_slave() mmd_hmip
[   57.130036] eq3loop: eq3loop_open_slave() mmd_hmip

Code: Alles auswählen

[email protected]:~ $ sudo pivccu-info
piVCCU version: 3.47.10-28
Kernel modules: Available
Raw UART dev:   Available
Rasp.Pi3 UART:  Assigned to GPIO pins
HMRF Hardware:  RPI-RF-MOD
HMIP Hardware:  RPI-RF-MOD
Board serial:   58A992FFC6
Radio MAC:      unknown
SGTIN:          3014F711A0001F58A992FFC6
State:          RUNNING
PID:            954
IP:             192.168.178.38
IP:             2003:d0:bf43:1200:c82f:e5ff:febf:cdad
IP:             fd00::c82f:e5ff:febf:cdad
CPU use:        475.45 seconds
BlkIO use:      77.74 MiB
Memory use:     199.57 MiB
KMem use:       7.10 MiB
Link:           vethpivccu
 TX bytes:      33.15 MiB
 RX bytes:      65.80 MiB
 Total bytes:   98.95 MiB

Code: Alles auswählen

[email protected]:~ $ sudo pivccu-attach cat /var/log/messages
Jul 12 10:29:36 piVCCU syslog.info syslogd started: BusyBox v1.29.2
Jul 12 10:29:36 piVCCU user.notice kernel: klogd started: BusyBox v1.29.2 (2019-06-21 09:16:48 CEST)
Jul 12 10:29:38 piVCCU syslog.info syslogd exiting
Jul 12 10:29:38 ccu3-webui syslog.info syslogd started: BusyBox v1.29.2
Jul 12 10:29:38 ccu3-webui user.notice kernel: klogd started: BusyBox v1.29.2 (2019-06-21 09:16:48 CEST)
Jul 12 10:29:38 ccu3-webui daemon.err udhcpc[170]: started, v1.29.2
Jul 12 10:29:38 ccu3-webui daemon.err udhcpc[170]: sending discover
Jul 12 10:29:38 ccu3-webui daemon.err udhcpc[170]: sending select for 192.168.178.38
Jul 12 10:29:38 ccu3-webui daemon.err udhcpc[170]: lease of 192.168.178.38 obtained, lease time 864000
Jul 12 10:29:39 ccu3-webui user.info firewall: iptables v1.6.2: invalid port/service `310000' specified Try `iptables -h' or 'iptables --help' for more information.
Jul 12 10:29:39 ccu3-webui user.info firewall: ip6tables v1.6.2: invalid port/service `310000' specified Try `ip6tables -h' or 'ip6tables --help' for more information.
Jul 12 10:29:39 ccu3-webui user.info firewall: configuration set
Jul 12 10:29:39 ccu3-webui daemon.info ifplugd(eth0)[271]: ifplugd 0.28 initializing.
Jul 12 10:29:39 ccu3-webui daemon.info ifplugd(eth0)[271]: Using interface eth0/CA:2F:E5:BF:CD:AD with driver <veth> (version: 1.0)
Jul 12 10:29:39 ccu3-webui daemon.info ifplugd(eth0)[271]: Using detection mode: SIOCETHTOOL
Jul 12 10:29:39 ccu3-webui daemon.info ifplugd(eth0)[271]: Initialization complete, link beat detected.
Jul 12 10:29:39 ccu3-webui daemon.warn ifplugd(eth0)[271]: Could not open /dev/tty, cannot beep.
Jul 12 10:29:39 ccu3-webui daemon.info ifplugd(eth0)[271]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Jul 12 10:29:39 ccu3-webui daemon.warn ifplugd(eth0)[271]: client: ifup: interface eth0 already configured
Jul 12 10:29:39 ccu3-webui daemon.info ifplugd(eth0)[271]: Program executed successfully.
Jul 12 10:29:49 ccu3-webui daemon.notice ntpdate[279]: step time server 131.188.3.220 offset -0.001225 sec
Jul 12 10:29:49 ccu3-webui daemon.notice ntpd[280]: ntpd [email protected] Fri Jun 21 07:15:18 UTC 2019 (1): Starting
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[280]: Command line: /usr/sbin/ntpd -g 0.de.pool.ntp.org 1.de.pool.ntp.org 2.de.pool.ntp.org 3.de.pool.ntp.org
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: proto: precision = 0.416 usec (-21)
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen and drop on 0 v6wildcard [::]:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen normally on 2 lo 127.0.0.1:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen normally on 3 eth0 192.168.178.38:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen normally on 4 lo [::1]:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen normally on 5 eth0 [fd00::c82f:e5ff:febf:cdad]:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listen normally on 6 eth0 [2003:d0:bf43:1200:c82f:e5ff:febf:cdad]:123
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: Listening on routing socket on fd #23 for interface updates
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: kernel reports TIME_ERROR: 0x2041: Clock Unsynchronized
Jul 12 10:29:49 ccu3-webui daemon.info ntpd[282]: kernel reports TIME_ERROR: 0x2041: Clock Unsynchronized
Jul 12 10:29:49 ccu3-webui daemon.err xinetd[302]: Unable to read included directory: /etc/config/xinetd.d [file=/etc/xinetd.conf] [line=14]
Jul 12 10:29:49 ccu3-webui daemon.crit xinetd[302]: 302 {init_services} no services. Exiting...
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: write_pid /var/run/cuxd.pid [337]
Jul 12 10:29:49 ccu3-webui user.info homematic: started cux-daemon
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: CUx-Daemon(2.1.0) on CCU(3.47.10) start PID:337
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:1166 update(-193s):Fri Jul 12 10:26:36 2019
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: 2 device-paramset(s) loaded ok!
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: write_proxy /var/cache/cuxd_proxy.ini (337 /usr/local/addons/cuxd/ 2.1.0 3.47.10 0)
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: add interface 'CUxD'
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: write interface(1) 'BidCos-RF' to /usr/local/etc/config/InterfacesList.xml
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: write interface(2) 'VirtualDevices' to /usr/local/etc/config/InterfacesList.xml
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: write interface(3) 'HmIP-RF' to /usr/local/etc/config/InterfacesList.xml
Jul 12 10:29:49 ccu3-webui daemon.info cuxd[337]: write interface(4) 'CUxD' to /usr/local/etc/config/InterfacesList.xml
Jul 12 10:29:49 ccu3-webui user.info root: Updating RF Lan Gateway Coprocessor Firmware
Jul 12 10:29:49 ccu3-webui user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Jul 12 10:29:49 ccu3-webui user.info root: Updating RF Lan Gateway Firmware
Jul 12 10:29:49 ccu3-webui user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Jul 12 10:29:50 ccu3-webui user.info kernel: [   42.033280] eq3loop: created slave mmd_hmip
Jul 12 10:29:50 ccu3-webui user.info kernel: [   42.033565] eq3loop: created slave mmd_bidcos
Jul 12 10:29:52 ccu3-webui user.info kernel: [   44.115844] eq3loop: eq3loop_open_slave() mmd_bidcos
Jul 12 10:30:05 ccu3-webui user.info kernel: [   57.116495] eq3loop: eq3loop_close_slave() mmd_hmip
Jul 12 10:30:05 ccu3-webui user.info kernel: [   57.119642] eq3loop: eq3loop_close_slave() mmd_hmip
Jul 12 10:30:05 ccu3-webui user.info kernel: [   57.130036] eq3loop: eq3loop_open_slave() mmd_hmip
Jul 12 10:30:14 ccu3-webui daemon.warn cuxd[337]: process_rpc_request(127.0.0.1) - illegal XMLRPC(listDevices) request
Jul 12 10:30:16 ccu3-webui daemon.warn cuxd[337]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
Jul 12 10:30:27 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00091569927D28:1","MOTION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: MOTION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00091569927D28:1","MOTION"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:27 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00155993965711:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00155993965711:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:27 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0000D7099A47AA:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"0000D7099A47AA:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:27 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0000D3C98C9D70:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"0000D3C98C9D70:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:27 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001559939646E5:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"001559939646E5:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:27 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:28 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00155993965468:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00155993965468:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:28 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A55699D7280:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000A55699D7280:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:28 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A55699D76C3:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000A55699D76C3:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:28 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A55699D748B:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000A55699D748B:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:28 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A55699D74E6:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000A55699D74E6:1","SMOKE_DETECTOR_ALARM_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:30:28 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:30:36 ccu3-webui daemon.info cuxd[337]: INIT 'xmlrpc_bin://127.0.0.1:31999' '1783'
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","SET_POINT_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SET_POINT_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","SET_POINT_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","ACTUAL_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTUAL_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","ACTUAL_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","ACTIVE_PROFILE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTIVE_PROFILE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","ACTIVE_PROFILE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","WINDOW_STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: WINDOW_STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","WINDOW_STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","SET_POINT_MODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SET_POINT_MODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","SET_POINT_MODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","PARTY_TIME_START"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","PARTY_TIME_START"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","PARTY_TIME_END"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","PARTY_TIME_END"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","PARTY_SET_POINT_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POINT_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","PARTY_SET_POINT_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:53 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2201:1","PARTY_MODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_MODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2201:1","PARTY_MODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:53 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","SET_POINT_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SET_POINT_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","SET_POINT_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","ACTUAL_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTUAL_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","ACTUAL_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","ACTIVE_PROFILE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTIVE_PROFILE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","ACTIVE_PROFILE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","WINDOW_STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: WINDOW_STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","WINDOW_STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","SET_POINT_MODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SET_POINT_MODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","SET_POINT_MODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","PARTY_TIME_START"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","PARTY_TIME_START"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","PARTY_TIME_END"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","PARTY_TIME_END"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","PARTY_SET_POINT_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POINT_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","PARTY_SET_POINT_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:45:56 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000393C98D2167:1","PARTY_MODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_MODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000393C98D2167:1","PARTY_MODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:45:56 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","SET_POINT_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SET_POINT_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","SET_POINT_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","ACTUAL_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTUAL_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","ACTUAL_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","ACTIVE_PROFILE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTIVE_PROFILE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","ACTIVE_PROFILE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","WINDOW_STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: WINDOW_STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","WINDOW_STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","SET_POINT_MODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SET_POINT_MODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","SET_POINT_MODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","PARTY_TIME_START"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_START"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","PARTY_TIME_START"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","PARTY_TIME_END"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_TIME_END"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","PARTY_TIME_END"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","PARTY_SET_POINT_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_SET_POINT_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","PARTY_SET_POINT_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Jul 12 10:46:00 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000397098A3904:1","PARTY_MODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PARTY_MODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"000397098A3904:1","PARTY_MODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Jul 12 10:46:00 ccu3-webui local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
HMserver.log ist leider sehr durch die Einbindung von Philips hue-Fehlern überlaufen und extrem ausufernd.

Kannst Du den Fehler lokalisieren ?

Ich habe mittlerweile ein 3Ampere-Netzteil am microUSB des Pi 3B+.

RouvenE
Beiträge: 205
Registriert: 11.06.2013, 19:54

Re: HB-RF-MOD externe Antenne

Beitrag von RouvenE » 13.07.2019, 12:32

Hi Alex,

Konntest Du schon gucken ?

Wäre klasse, wenn es einen Workaround gibt. Merkwürdig ist, dass dieser Fehler nach zahlreichen Stunden erst auftritt.

RouvenE
Beiträge: 205
Registriert: 11.06.2013, 19:54

Re: HB-RF-MOD externe Antenne

Beitrag von RouvenE » 14.07.2019, 13:42

Sofern niemand die Zeit hat, zu antworten, führe ich schonmal meine Gedanken weiter...

Beobachtung: direkt per USB am RPi angeschlossen, läuft das externe Modul einwandfrei. Über USB-Extender und RJ45 verlängert, verliert das Modul nach zahlreichen Stunden erst die Verbindung...

Mögliche Abhilfe ?
sudo nano /boot/config.txt
einfügen bei älteren Firmwares: safe_mode_gpio=4
einfügen bei neueren Firmwares: max_usb_current=1

Dies würde die Strombegrenzung am USB auf 0.6A aufheben und auf 1.2A erhöhen. Ob man einen Spannungsabfall aus meinen geposteten Logs herausliest und dies eine Lösung sein kann, wollte ich nun erfragen, bevor etwas zerstört wird.

deimos
Beiträge: 3049
Registriert: 20.06.2017, 10:38
Wohnort: Leimersheim
Hat sich bedankt: 11 Mal
Danksagung erhalten: 55 Mal
Kontaktdaten:

Re: HB-RF-MOD externe Antenne

Beitrag von deimos » 14.07.2019, 15:16

Hi,

ich sehe in den Logs nichts Auffälliges, aber kann natürlich sein, dass in der hmserver.log noch irgendwas drin war. Falls du ein gutes Multimeter hast, könntest du mal messen, welche Spannung hinter dem USB Extender anliegt und welchen Widerstand du im Kabel hast. Es könnte schon sein, dass du hier im Grenzbereich operierst, 12m bei 5V kann schon zu einem ordentlichen Spannungsabfall führen, wenn da ein dünner Kabelquerschnitt im Einsatz ist.
Die Parameter in der config.txt werden nichts bringen, da die sich auf Strom und nicht auf Spannung beziehen und Strom dürfte nicht dein Problem sein.

Viele Grüße
Alex

RouvenE
Beiträge: 205
Registriert: 11.06.2013, 19:54

Re: HB-RF-MOD externe Antenne

Beitrag von RouvenE » 14.07.2019, 15:27

Die 10-12m sind immerhin mit gutem CAT7 verlegt. Auf beiden Seiten des Kabel läuft es auf patch panels.

Nunja, der ganz Sinn des externen Moduls war die Verbannung des RPi in den Keller.

Ich habe einen Multimeter, weiss aber leider nicht, wo ich a) genau die Punkte messen muss und b) wie genau den Widerstand des Kabels messe.

Es ist für mich nicht erklärbar, warum das Moduls über die Verlängerung stundenlang gut werkelt, dann aber die Füsse von sich streckt.

deimos
Beiträge: 3049
Registriert: 20.06.2017, 10:38
Wohnort: Leimersheim
Hat sich bedankt: 11 Mal
Danksagung erhalten: 55 Mal
Kontaktdaten:

Re: HB-RF-MOD externe Antenne

Beitrag von deimos » 14.07.2019, 15:51

Hi,

das kann vieles sein. Spannungsabfall ist abhängig vom Strom, wenn mehr gesendet wird, braucht es mehr Strom. Es könnten genausogut Störeinstrahlungen sein.

CAT7 Kabel sagt an der Stelle leider erstmal garnichts aus, weil der Kabelquerschnitt nicht genormt ist. Da du die genaue Länge nicht kennst, gehe ich davon aus, dass du auch keine Prüfprotokolle hast. Leider ist meine(berufliche) Erfahrung so, dass es nur wenige Elektriker gibt, welche wirklich wissen, wie man Netzwerkkabel richtig verlegt und auflegt. Und es wird da dann gerne mal AWG27 Kabel genommen, weil das nicht so störisch ist, wie AWG23 oder AWG22, bei welchem man quasi gezwungen ist, die richtigen Radien einzuhalten, weil man es fast nicht anders verlegt bekommt.

Viele Grüße
Alex

RouvenE
Beiträge: 205
Registriert: 11.06.2013, 19:54

Re: HB-RF-MOD externe Antenne

Beitrag von RouvenE » 16.08.2019, 22:11

Habe nun mehrere USB-Ethernet-Adapter getestet.

Zur Info: Raspberry 4 im Keller, die externe Antenne soll ein Stockwerk weiter nach oben.
Die Stockwerke sind mit Cat7-Kabeln verbunden, die auf Patch-Paneln enden.

Dadurch, dass über das Patch-Panel auch weitere Cat7-Kabel verbunden sind, tippe ich, die Belegung ist korrekt. Gigabit funktioniert.

Der erste getestete USB1.1-Adapter lieferte der Antenne Signal und Strom. Nach einigen Stunden brach scheinbar die Spannung ein, sodass die Antenne scheinbar nicht mehr mit Strom versorgt wurde. piVCCU3 hat dies nicht bemerkt. Aktoren konnten nicht mehr angesprochen werden.

Ein anderer USB-Adapter beherrschte USB2.0. Entgegen der Beschreibung lag ein Netzteil zur Verstärkung anbei. Eine Verbindung konnte dieser gar nicht erst herstellen.

Eine Test mit 15m-Ethernetkabel ohne Cat7 und Patch-Panel funktionierte damit allerdings.

Hier die getesteten Adapter:
https://www.amazon.de/gp/product/B01FDH ... UTF8&psc=1
https://www.amazon.de/gp/product/B001TO ... UTF8&psc=1

Nun gibt es dutzende weitere USB-Adapter, die USB2 oder 3 unterstützen. Hat noch jemand weitere Tipps?

Antworten

Zurück zu „piVCCU“