ich hoffe mir kann jemand helfen, da ich momentan keine Idee mehr habe.
Nach einem geplanten Shutdown zwecks Stromabschaltung funktioniert mein HMIP-BSM (Lichtschalter) nicht mehr.
Manuell kann ich ihn bedienen (also am Taster), aber nicht per CCU. Es kommt immer "Gerätekommunikation gestört".
Vorher lief alles monatelang einwandfrei.
Ich verwende:
Raspi
piVCCU 2.41.5-40
RPI-RF-MOD
Ich habe schon zig mal neu gestartet, aber leider ohne Erfolg.
Das aktuelle Logfile füge ich hier ein. Ich habe auf "Alles loggen" gestellt, falls das zuviel ist oder noch etwas anderes gebraucht wird,
bitte Bescheid sagen.
Code: Alles auswählen
***** messages *****
Jul 9 21:47:54 homematic-ccu2 syslog.info syslogd started: BusyBox v1.20.2
Jul 9 21:47:54 homematic-ccu2 user.notice kernel: klogd started: BusyBox v1.20.2 (2018-11-20 17:56:54 CET)
Jul 9 23:47:54 homematic-ccu2 syslog.info syslogd started: BusyBox v1.20.2
Jul 9 23:47:54 homematic-ccu2 user.notice kernel: klogd started: BusyBox v1.20.2 (2018-11-20 17:56:54 CET)
Jul 9 21:47:54 homematic-ccu2 daemon.info ifplugd(eth0)[120]: ifplugd 0.28 initializing.
Jul 9 21:47:55 homematic-ccu2 daemon.info ifplugd(eth0)[120]: Using interface eth0/BA:53:A3:2E:43:97 with driver <veth> (version: 1.0)
Jul 9 21:47:55 homematic-ccu2 daemon.info ifplugd(eth0)[120]: Using detection mode: SIOCETHTOOL
Jul 9 21:47:55 homematic-ccu2 daemon.info ifplugd(eth0)[120]: Initialization complete, link beat detected.
Jul 9 21:47:55 homematic-ccu2 daemon.warn ifplugd(eth0)[120]: Could not open /dev/tty, cannot beep.
Jul 9 21:47:55 homematic-ccu2 daemon.info ifplugd(eth0)[120]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Jul 9 21:47:55 homematic-ccu2 daemon.warn ifplugd(eth0)[120]: client: net.ipv4.tcp_timestamps = 0
Jul 9 21:47:55 homematic-ccu2 daemon.warn ifplugd(eth0)[120]: client: eth0 carrier detected
Jul 9 21:47:55 homematic-ccu2 daemon.info ifplugd(eth0)[120]: Program executed successfully.
Jul 9 23:47:55 homematic-ccu2 user.debug setclock: Try to get time from ntp.homematic.com
Jul 9 23:47:55 homematic-ccu2 user.debug setclock: Tue Jul 9 23:47:55 CEST 2019
Jul 9 21:48:00 homematic-ccu2 user.info kernel: [ 38.242352] NET: Registered protocol family 38
Jul 9 21:48:01 homematic-ccu2 user.info logger: Updating RF Lan Gateway Coprocessor Firmware
Jul 9 21:48:01 homematic-ccu2 user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Jul 9 21:48:01 homematic-ccu2 user.info logger: Updating RF Lan Gateway Firmware
Jul 9 21:48:01 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Jul 9 21:48:01 homematic-ccu2 user.info logger: Updating Wired Lan Gateway Firmware
Jul 9 21:48:01 homematic-ccu2 user.info update-lgw-firmware: No gateway found in config file /etc/config/hs485d.conf
Jul 9 21:48:01 homematic-ccu2 user.info logger: Checking if firmware Update is needed for RPI-RF-MOD
Jul 9 21:48:01 homematic-ccu2 user.info logger: [DEBUG] Start bootloader ...
Jul 9 21:48:01 homematic-ccu2 user.info logger: [DEBUG] Bootloader running
Jul 9 21:48:01 homematic-ccu2 user.info logger: [DEBUG] Request bootloader version ...
Jul 9 21:48:01 homematic-ccu2 user.info logger: [INFO] SGTIN = 3014f711a0001f58a99300c3
Jul 9 21:48:01 homematic-ccu2 user.info logger: [INFO] Performing update with firmware file '/firmware/RPI-RF-MOD/dualcopro_update_blhmip-3.4.8.eq3' ...
Jul 9 21:48:01 homematic-ccu2 user.info logger: [DEBUG] Start application ...
Jul 9 21:48:02 homematic-ccu2 user.info logger: [DEBUG] Application 'DualCoPro_App' running
Jul 9 21:48:02 homematic-ccu2 user.info logger: [DEBUG] Request application version ...
Jul 9 21:48:02 homematic-ccu2 user.info logger: [DEBUG] Request application version ...
Jul 9 21:48:02 homematic-ccu2 user.info logger: [WARN] The coprocessor already has the desired version 3.4.8
Jul 9 21:48:02 homematic-ccu2 user.info logger: [ERROR] No update performed.
Jul 9 21:48:02 homematic-ccu2 user.info logger: [INFO] Exiting update tool.
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: FastMacResponder::ThreadFunction() started Id=239
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: SubsystemManager::ThreadFunction() started. Id=241
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: MacController::ThreadFunction() started. Id=240
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C<: #0 COMMON IdentifyRequest
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C< @39985: bin:FD 00 03 FE 00 01 14 1E
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: Subsystem 1 ThreadFunction() started. Id=243
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: UpstreamCharConnection slave mmd_bidcos ThreadFunction() started Id=244
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: Subsystem 2 ThreadFunction() started. Id=245
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: UpstreamCharConnection slave ttyS0 ThreadFunction() started Id=242
Jul 9 21:48:02 homematic-ccu2 user.info kernel: [ 39.982691] eq3loop: created slave ttyS0
Jul 9 21:48:02 homematic-ccu2 user.info kernel: [ 39.983125] eq3loop: created slave mmd_bidcos
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C> @39990: #0 COMMON Response Ack 44 75 61 6C 43 6F 50 72 6F 5F 41 70 70
Jul 9 23:48:02 homematic-ccu2 user.info multimac: Copro application running.
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C<: #1 TRX GetVersion
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C< @39990: bin:FD 00 03 01 01 02 9E 1B
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C> @40096: #1 TRX Response Ack 03 04 08 01 00 01 01 22 00
Jul 9 23:48:02 homematic-ccu2 user.info multimac: Vapp=030408 Vbl=010001 Vhmos=012200
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C<: #2 COMMON GetSGTIN
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C< @40096: bin:FD 00 03 FE 02 04 98 03
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C> @40102: #2 COMMON Response Ack 30 14 F7 11 A0 00 1F 58 A9 93 00 C3
Jul 9 23:48:02 homematic-ccu2 user.info multimac: SGTIN=30 14 F7 11 A0 00 1F 58 A9 93 00 C3
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C<: #3 LLMAC GetDefaultRfAddress
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C< @40102: bin:FD 00 03 03 03 08 92 0F
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C> @40106: #3 LLMAC Response ACK @255: 00 FF FF
Jul 9 23:48:02 homematic-ccu2 user.info multimac: RF address=65535
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C<: #4 LLMAC GetSerialNumber
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C< @40106: bin:FD 00 03 03 04 07 00 2E
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C> @40111: #4 LLMAC Response ACK @20549: 50 45 51 30 36 32 38 39 33 31
Jul 9 23:48:02 homematic-ccu2 user.info multimac: Serial Number=PEQ0628931
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C<: #5 LLMAC GetTimestamp
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C< @40111: bin:FD 00 03 03 05 02 86 33
Jul 9 23:48:02 homematic-ccu2 user.debug multimac: C> @40115: #5 LLMAC Response ACK @779: 03 0B
Jul 9 23:48:02 homematic-ccu2 user.info multimac: Timer= 779
Jul 9 23:48:05 homematic-ccu2 user.info rfd: BidCoS-Service started
Jul 9 23:48:05 homematic-ccu2 user.info rfd: XmlRpc Server is listening on TCP port 2001
Jul 9 23:48:05 homematic-ccu2 user.warn rfd: opendir(/etc/config/firmware//) failed
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: UpstreamCharConnection slave device mmd_bidcos opened
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A<: #0 HmSystem Identify Co_CPU_App
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: CCU2CommController::init() - Improved initialization.
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A>: #0 HmSystem Identify
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A<: #0 HmSystem Response 02 43 6F 5F 43 50 55 5F 41 70 70
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: CCU2CommController::improvedInit() - Coprocessor is in application.
Jul 9 23:48:05 homematic-ccu2 user.info kernel: [ 42.817667] eq3loop: eq3loop_open_slave() mmd_bidcos
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A>: #1 HmSystem VersionRequest
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A<: #1 HmSystem Response 02 01 00 01 03 04 08
Jul 9 23:48:05 homematic-ccu2 user.info rfd: CCU2CommController::init(): Coprocessor Bootloader Version is: 1.0.1
Jul 9 23:48:05 homematic-ccu2 user.info rfd: CCU2CommController::init(): Coprocessor Firmware Version is: 3.4.8
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A>: #2 HmSystem CsmaCaControl 00
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: CSMA/CD off
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A<: #2 HmSystem Response 01
Jul 9 23:48:05 homematic-ccu2 user.info rfd: () CCU2CommController::setCSMACAEnabled(): CSMA/CA disabled.
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A>: #3 HmSystem GetSerialNumber
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A<: #3 HmSystem Response 02 50 45 51 30 36 32 38 39 33 31
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A>: #4 HmBidcos SetTime 5D 25 0B 95 04
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: Time 1562708885 +02:00
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A<: #4 HmSystem Response 01
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: Default interface is now PEQ0628931
Jul 9 23:48:05 homematic-ccu2 user.info rfd: Current AES key=0, previous AES key=0
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A>: #5 HmBidcos SetAesKey.cur (0) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A<: #5 HmBidcos Response 01
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: (PEQ0628931) Response status: OK.
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: CCU2BidcosRemoteInterface::StartInterface(): addr=40 97 d6
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A>: #6 HmBidcos SetRfAddress 40 97 D6
Jul 9 23:48:05 homematic-ccu2 user.debug multimac: A<: #6 HmBidcos Response 01
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: (PEQ0628931) Response status: OK.
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: Device description rf_dw.xml loaded (1)
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: Device description rf_bl.xml loaded (2)
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: Device description rf_dim_1t_fm_lf.xml loaded (3)
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: Device description rf_pbi.xml loaded (4)
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: Device description rf_bl_le_v2_3.xml loaded (5)
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: Device description rf_tis_le_v1_0.xml loaded (6)
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: Device description rf_sci_3.xml loaded (7)
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: Device description rf_scd_v1_0.xml loaded (8)
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: Device description rf_sen_mdir.xml loaded (9)
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: Device description rf_em_8.xml loaded (10)
Jul 9 23:48:05 homematic-ccu2 user.debug rfd: Device description rf_winmatic.xml loaded (11)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_dim_2l_644.xml loaded (12)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_sc_e_v1_7.xml loaded (13)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_ash550.xml loaded (14)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_sen_ep.xml loaded (15)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_keymatic.xml loaded (16)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_s550ia.xml loaded (17)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_rc-4-2.xml loaded (18)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_rhs_e_v1_7.xml loaded (19)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_dim_2l_644_le_v2_4.xml loaded (20)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_d_le_v1_9.xml loaded (21)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_bl_conf_644_e_v2_1.xml loaded (22)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_tc_it_wm-w-eu.xml loaded (23)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_swi.xml loaded (24)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_ou_led16_ge_v1_1.xml loaded (25)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_rc_19.xml loaded (26)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_ou_led16_le_v1_0.xml loaded (27)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_rep.xml loaded (28)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_bl_conf_644.xml loaded (29)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_es_pmsw_le_v2_4.xml loaded (30)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_em_8_bit.xml loaded (31)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_dim_1t_644.xml loaded (32)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_4dis.xml loaded (33)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_cc_vd.xml loaded (34)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_cc_tc.xml loaded (35)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_s_le_v1_5.xml loaded (36)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_sen_wa_od.xml loaded (37)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_central.xml loaded (38)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_s_8_ba.xml loaded (39)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_wds40_th_i_2.xml loaded (40)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_cc_rt_dn.xml loaded (41)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_es_tx_wm_le_v1_0.xml loaded (42)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_sen_db.xml loaded (43)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_dim_2t_644_le_v2_4.xml loaded (44)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_dim_1tconf_644.xml loaded (45)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_resc_win_pcb_sc.xml loaded (46)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_es_tx_wm.xml loaded (47)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_sec_sd_2.xml loaded (48)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_cmm.xml loaded (49)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_oligo_smart_iq.xml loaded (50)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_cfm_tw.xml loaded (51)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_sec_sd_schueco.xml loaded (52)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_d_le_v1_7.xml loaded (53)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_rc-key4-2.xml loaded (54)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_cc_rt_dn_bom.xml loaded (55)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_dim_t.xml loaded (56)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_rc-sec4-2.xml loaded (57)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_s_644.xml loaded (58)
Jul 9 23:48:06 homematic-ccu2 user.debug rfd: Device description rf_dis_ep_wm55.xml loaded (59)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_sec_sir_wm.xml loaded (60)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_pb-2-wm55_ge_v1_4.xml loaded (61)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_pb-2-wm55_le_v1_3.xml loaded (62)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_hm-wds100-c6-o-2.xml loaded (63)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_dim_1pwm_644.xml loaded (64)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_rc_2_fm.xml loaded (65)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_s_1conf_644_le_v2_3.xml loaded (66)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_sec_sfa.xml loaded (67)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_roto_wdf_solar.xml loaded (68)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_ddc.xml loaded (69)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_fs_ba.xml loaded (70)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_rc.xml loaded (71)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_sen_li.xml loaded (72)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_s_1conf_644.xml loaded (73)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_rgbw.xml loaded (74)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_ao.xml loaded (75)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_rc-4-3_single_on.xml loaded (76)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_s_2conf_644.xml loaded (77)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_sc_le_v1_6.xml loaded (78)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_rc_single_on.xml loaded (79)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_rc_12.xml loaded (80)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_cm.xml loaded (81)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_s_ba.xml loaded (82)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_cfm.xml loaded (83)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_s.xml loaded (84)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_dim_1t_644_le_v2_4.xml loaded (85)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_dim_1l_644_le_v2_4.xml loaded (86)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_sen_mdir_wm55.xml loaded (87)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_bl_conf_644_e_v2_0.xml loaded (88)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_wds_v1_0.xml loaded (89)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_rd_le_v1_3.xml loaded (90)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_tis.xml loaded (91)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_pb-2.xml loaded (92)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_bl_644.xml loaded (93)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_dim_2pwm.xml loaded (94)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_sec_sd.xml loaded (95)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_sen_mdir_v1_5.xml loaded (96)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_dim_2t_644.xml loaded (97)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_dim_t_le_v1_9.xml loaded (98)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_dim_1t_dr.xml loaded (99)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_cf.xml loaded (100)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_ws550.xml loaded (101)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_rd.xml loaded (102)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_wds_v1_1.xml loaded (103)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_sec_sco.xml loaded (104)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_wds30_ot2.xml loaded (105)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_ja_conf_644.xml loaded (106)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_ks550.xml loaded (107)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_sec_mdir.xml loaded (108)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_rhs_le_v1_6.xml loaded (109)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_dis_ep_wm55_le_v1_0.xml loaded (110)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_s_1conf_644_le_v2_1.xml loaded (111)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_st_6_sh.xml loaded (112)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_s_le_v2_3.xml loaded (113)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_dim_1l_644.xml loaded (114)
Jul 9 23:48:07 homematic-ccu2 user.debug rfd: Device description rf_s_mega168.xml loaded (115)
Jul 9 23:48:08 homematic-ccu2 user.debug rfd: Device description rf_d.xml loaded (116)
Jul 9 23:48:08 homematic-ccu2 user.debug rfd: Device description rf_rhs.xml loaded (117)
Jul 9 23:48:08 homematic-ccu2 user.debug rfd: Device description rf_sec_mdir_v1_5.xml loaded (118)
Jul 9 23:48:08 homematic-ccu2 user.debug rfd: Device description rf_dim_1pwm_644_le_v2_4.xml loaded (119)
Jul 9 23:48:08 homematic-ccu2 user.debug rfd: Device description rf_s_4_ba.xml loaded (120)
Jul 9 23:48:08 homematic-ccu2 user.debug rfd: Device description rf_dis_wm55.xml loaded (121)
Jul 9 23:48:08 homematic-ccu2 user.debug rfd: Device description rf_es_pmsw.xml loaded (122)
Jul 9 23:48:08 homematic-ccu2 user.debug rfd: Device description rf_cc_tc_le_v1_9.xml loaded (123)
Jul 9 23:48:08 homematic-ccu2 user.debug rfd: Device description rf_sc.xml loaded (124)
Jul 9 23:48:08 homematic-ccu2 user.debug rfd: Device description rf_dim_1tconf_644_le_v2_4.xml loaded (125)
Jul 9 23:48:08 homematic-ccu2 user.debug rfd: Device description rf_rc_dis.xml loaded (126)
Jul 9 23:48:12 homematic-ccu2 user.debug multimac: C<: #6 TRX GetDutyCycle
Jul 9 23:48:12 homematic-ccu2 user.debug multimac: C< @50115: bin:FD 00 03 01 06 03 8C 1D
Jul 9 23:48:12 homematic-ccu2 user.debug multimac: C> @50220: #6 TRX Response Ack 00
Jul 9 23:48:12 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 0.0 ) = 0
Jul 9 23:48:15 homematic-ccu2 user.debug multimac: C> @53191: #0 LLMAC RX @13850ms -69dBm 07 86 70 54 54 B9 00 00 00 00 9B 32
Jul 9 23:48:15 homematic-ccu2 user.debug multimac: Bidcos RX: #07[BC|Ren|WMup] 5454B9->000000 WeatherData: 00 9B 32
Jul 9 23:48:15 homematic-ccu2 user.debug multimac: GetAckActionForIncomingTelegram(): Unknown peer, AckAction_NotForUs
Jul 9 23:48:15 homematic-ccu2 user.debug multimac: A<: #3 HmBidcos RxTelegram AuthNone #07[BC|Ren|WMup] 5454B9->000000 WeatherData: 00 9B 32
Jul 9 23:48:17 homematic-ccu2 user.debug multimac: C> @54409: #0 TRX CMD=0B 14 02
Jul 9 23:48:17 homematic-ccu2 user.warn multimac: Bad cast: std::bad_cast
Jul 9 23:48:17 homematic-ccu2 user.debug multimac: MacController::OnDownstreamFrame(#255 LLMAC TX @32768ms [10k,WOR,NoCCA] 97 94 3F 40 97 D6 00 00 00 02 04 24 B7 C8 20)
Jul 9 23:48:17 homematic-ccu2 user.debug multimac: C<: #7 LLMAC TX @32768ms [10k,WOR,NoCCA] 97 94 3F 40 97 D6 00 00 00 02 04 24 B7 C8 20
Jul 9 23:48:17 homematic-ccu2 user.debug multimac: C< @54457: bin:FD 00 15 03 07 06 80 00 90 97 94 3F 40 97 D6 00 00 00 02 04 24 B7 C8 20 39 F9
Jul 9 23:48:17 homematic-ccu2 user.debug multimac: C> @54846: #7 LLMAC Response ACK @15124: 3B 14
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: UpstreamCharConnection slave device ttyS0 opened
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: UpstreamCharConnection slave device ttyS0 closed
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: UpstreamCharConnection slave device ttyS0 opened
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: UpstreamCharConnection slave device ttyS0 closed
Jul 9 23:48:22 homematic-ccu2 user.info kernel: [ 60.065744] eq3loop: eq3loop_close_slave() ttyS0
Jul 9 23:48:22 homematic-ccu2 user.info kernel: [ 60.070421] eq3loop: eq3loop_close_slave() ttyS0
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: UpstreamCharConnection slave device ttyS0 opened
Jul 9 23:48:22 homematic-ccu2 user.info kernel: [ 60.080839] eq3loop: eq3loop_open_slave() ttyS0
Jul 9 23:48:22 homematic-ccu2 user.notice kernel: [ 60.083104] eq3loop: eq3loop_ioctl_slave() ttyS0: unhandled ioctl 0x5459
Jul 9 23:48:22 homematic-ccu2 user.notice kernel: [ 60.083118] eq3loop: eq3loop_ioctl_slave() ttyS0: unhandled ioctl 0x545D
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: C<: #8 TRX GetDutyCycle
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: C< @60115: bin:FD 00 03 01 08 03 28 1E
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: A>: #251 COMMON GetSGTIN
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: A<: #251 COMMON Response Ack 30 14 F7 11 A0 00 1F 58 A9 93 00 C3
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: A>: #252 COMMON IdentifyRequest
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: A<: #252 COMMON Response Ack 48 4D 49 50 5F 54 52 58 5F 41 70 70
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: A>: #242 HMIP CMD=00 B1 9A D1
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: MacController::OnDownstreamFrame(#242 HMIP CMD=00 B1 9A D1)
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: C<: #9 HMIP CMD=00 B1 9A D1
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: C< @60201: bin:FD 00 06 02 09 00 B1 9A D1 20 33
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: C> @60206: #9 HMIP CMD=06 01
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: A<: #242 HMIP CMD=06 01
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: C> @60219: #8 TRX Response Ack 02
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 0.0, 1.0 ) = 0
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: A>: #243 HMIP CMD=0D 03
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: MacController::OnDownstreamFrame(#243 HMIP CMD=0D 03)
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: C<: #10 HMIP CMD=0D 03
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: C< @60224: bin:FD 00 04 02 0A 0D 03 87 B9
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: C> @60227: #10 HMIP CMD=06 01
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: A<: #243 HMIP CMD=06 01
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: A>: #45 TRX GetVersion
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: A<: #45 TRX Response Ack 03 04 08 01 00 01 01 22 00
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: A>: #46 TRX CMD=09
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: MacController::OnDownstreamFrame(#46 TRX CMD=09 )
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: C<: #11 TRX CMD=09
Jul 9 23:48:22 homematic-ccu2 user.debug multimac: C< @60267: bin:FD 00 03 01 0B 09 22 22
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C> @60372: #11 TRX Response Ack 04
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A<: #46 TRX Response Ack 04
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A>: #47 TRX GetDutyCycle
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A<: #47 TRX Response Ack 02
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A>: #48 TRX CMD=07 C8
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: MacController::OnDownstreamFrame(#48 TRX CMD=07 C8)
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C<: #12 TRX CMD=07 C8
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C< @60395: bin:FD 00 04 01 0C 07 C8 05 78
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C> @60499: #12 TRX Response Ack
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A<: #48 TRX Response Ack
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A>: #244 HMIP CMD=0A
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: MacController::OnDownstreamFrame(#244 HMIP CMD=0A )
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C<: #13 HMIP CMD=0A
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C< @60501: bin:FD 00 03 02 0D 0A 36 14
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C> @60505: #13 HMIP CMD=06 01 12 80 65 00
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A<: #244 HMIP CMD=06 01 12 80 65 00
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A>: #245 HMIP CMD=08 12 80 69 24
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: MacController::OnDownstreamFrame(#245 HMIP CMD=08 12 80 69 24)
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C<: #14 HMIP CMD=08 12 80 69 24
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C< @60522: bin:FD 00 07 02 0E 08 12 80 69 24 65 2A
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C> @60527: #14 HMIP CMD=06 01
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A<: #245 HMIP CMD=06 01
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A>: #246 HMIP CMD=14 BC 89 E4 8D 58 4D FD 20 7F 82 21 05 8B CF 6C 06 F4 6D 96 88 BA E8 A2 2A 0D 3D 48 97 B6 BA 47 F0 1D CA A7 39 B8 29 48 42 16 B1 8C 61 0B 5D EA 54 A6 30 BA 22 89 34 CA 66 66 5B D3 6F B3 D5 51 B6 67 98
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: MacController::OnDownstreamFrame(#246 HMIP CMD=14 BC 89 E4 8D 58 4D FD 20 7F 82 21 05 8B CF 6C 06 F4 6D 96 88 BA E8 A2 2A 0D 3D 48 97 B6 BA 47 F0 1D CA A7 39 B8 29 48 42 16 B1 8C 61 0B 5D EA 54 A6 30 BA 22 89 34 CA 66 66 5B
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C<: #15 HMIP CMD=14 BC 89 E4 8D 58 4D FD 20 7F 82 21 05 8B CF 6C 06 F4 6D 96 88 BA E8 A2 2A 0D 3D 48 97 B6 BA 47 F0 1D CA A7 39 B8 29 48 42 16 B1 8C 61 0B 5D EA 54 A6 30 BA 22 89 34 CA 66 66 5B D3 6F B3 D5 51 B6 67 98
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C< @60589: bin:FD 00 45 02 0F 14 BC 89 E4 8D 58 4D FC 7D 20 7F 82 21 05 8B CF 6C 06 F4 6D 96 88 BA E8 A2 2A 0D 3D 48 97 B6 BA 47 F0 1D CA A7 39 B8 29 48 42 16 B1 8C 61 0B 5D EA 54 A6 30 BA 22 89 34 CA 66 66 5B D3 6F B3 D5 51
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C> @60600: #15 HMIP CMD=06 01
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A<: #246 HMIP CMD=06 01
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A>: #247 HMIP CMD=12
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: MacController::OnDownstreamFrame(#247 HMIP CMD=12 )
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C<: #16 HMIP CMD=12
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C< @60610: bin:FD 00 03 02 10 12 78 44
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: C> @60614: #16 HMIP CMD=06 01
Jul 9 23:48:23 homematic-ccu2 user.debug multimac: A<: #247 HMIP CMD=06 01
Jul 9 23:48:24 homematic-ccu2 user.debug multimac: A>: #248 HMIP CMD=04 60 12 74 00 00 00 00
Jul 9 23:48:24 homematic-ccu2 user.debug multimac: MacController::OnDownstreamFrame(#248 HMIP CMD=04 60 12 74 00 00 00 00)
Jul 9 23:48:24 homematic-ccu2 user.debug multimac: C<: #17 HMIP CMD=04 60 12 74 00 00 00 00
Jul 9 23:48:24 homematic-ccu2 user.debug multimac: C< @61412: bin:FD 00 0A 02 11 04 60 12 74 00 00 00 00 47 E2
Jul 9 23:48:24 homematic-ccu2 user.debug multimac: C> @61416: #17 HMIP CMD=06 01
Jul 9 23:48:24 homematic-ccu2 user.debug multimac: A<: #248 HMIP CMD=06 01
Jul 9 23:48:31 homematic-ccu2 user.debug rfd: GetAvailableFirmware for HM-RCV-50
Jul 9 23:48:32 homematic-ccu2 user.debug multimac: C<: #18 TRX GetDutyCycle
Jul 9 23:48:32 homematic-ccu2 user.debug multimac: C< @70115: bin:FD 00 03 01 12 03 F4 1D
Jul 9 23:48:32 homematic-ccu2 user.debug multimac: C> @70219: #18 TRX Response Ack 02
Jul 9 23:48:32 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.0 ) = 0
Jul 9 23:48:33 homematic-ccu2 user.debug rfd: PlatformInit()
Jul 9 23:48:33 homematic-ccu2 user.info rfd: BidCos-RF_java support system.methodHelp
Jul 9 23:48:33 homematic-ccu2 user.info rfd: BidCos-RF_java support system.multicall
Jul 9 23:48:33 homematic-ccu2 user.info rfd: BidCos-RF_java support updateDevice
Jul 9 23:48:33 homematic-ccu2 user.info rfd: BidCos-RF_java support deleteDevices
Jul 9 23:48:33 homematic-ccu2 user.info rfd: BidCos-RF_java support newDevices
Jul 9 23:48:33 homematic-ccu2 user.info rfd: BidCos-RF_java support firmwareUpdateStatusChanged
Jul 9 23:48:33 homematic-ccu2 user.info rfd: BidCos-RF_java support replaceDevice
Jul 9 23:48:33 homematic-ccu2 user.info rfd: yes support replace device
Jul 9 23:48:33 homematic-ccu2 user.info rfd: BidCos-RF_java support readdedDevice
Jul 9 23:48:33 homematic-ccu2 user.info rfd: BidCos-RF_java support system.listMethods
Jul 9 23:48:33 homematic-ccu2 user.info rfd: BidCos-RF_java support event
Jul 9 23:48:33 homematic-ccu2 user.info rfd: BidCos-RF_java support listDevices
Jul 9 23:48:33 homematic-ccu2 user.debug rfd: GetAvailableFirmware for HM-RCV-50
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: Start thread '<Timer Scheduler Thread>, ThreadID = 1991156832, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: Create thread '<Timer Scheduler Thread>', stack size = 131072, ThreadID = 1991156832, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: TimerSchedulerThread started [iseSysLx.cpp:485]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: InitXmlRpcMethods: XmlRpcMethodEvent [iseXmlRpc.cpp:43]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: InitXmlRpcMethods: XmlRpcMethodListDevices [iseXmlRpc.cpp:44]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: InitXmlRpcMethods: XmlRpcMethodNewDevices [iseXmlRpc.cpp:45]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: InitXmlRpcMethods: XmlRpcMethodDeleteDevices [iseXmlRpc.cpp:46]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: InitXmlRpcMethods: XmlRpcMethodReportValueUsage [iseXmlRpc.cpp:47]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: InitXmlRpcMethods: XmlRpcMethodUpdateDevice [iseXmlRpc.cpp:48]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: InitXmlRpcMethods: XmlRpcMethodReplaceDevice [iseXmlRpc.cpp:49]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: InitXmlRpcMethods: XmlRpcMethodSetReadyConfig [iseXmlRpc.cpp:50]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: RegisterOnRTUpdate: dwCookie = 1 [iseDOM.cpp:2860]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: RegisterOnHistoryData: dwCookie = 1 [iseDOM.cpp:2949]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: RegisterOnFinishedDPInit: dwCookie = 1 [iseRTTimer.cpp:666]
Jul 9 23:48:34 homematic-ccu2 local0.debug ReGaHss: Verbose: IseRT: RegisterOnFinishedDPInit cookie = 1 [iseRT.cpp:51]
Jul 9 23:48:34 homematic-ccu2 local0.debug ReGaHss: Verbose: iseDOMPopClient::Clear failed! InternalBuffer == NULL! [iseDOMPopClient.cpp:273]
Jul 9 23:48:34 homematic-ccu2 local0.info ReGaHss: Info: IsePersist::LoadFromFile-> read header = %s?xml version="1.0" encoding="iso-8859-1" ? [iseDOMpersist.cpp:54]
Jul 9 23:48:35 homematic-ccu2 local0.debug ReGaHss: Verbose: CHANNEL::SetLastDPActionTime: call on change; id = 13 [iseDOMchn.h:288]
Jul 9 23:48:35 homematic-ccu2 local0.debug ReGaHss: Verbose: DEVICE::SetLastActionTime: call on change; id = 12 [iseDOMdev.h:225]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: IseObject::RemoveUnreferencedObjects() start, count=377 [iseDOMobj.cpp:586]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: IseObject::RemoveUnreferencedObjects() removed 0 unreferenced objects, count=377 [iseDOMobj.cpp:692]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: IseDOM::LoadOM: load succeeded, so reset modified flag [iseDOM.cpp:2636]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: IseDOM::LoadInterfacesFromFile -> read interfaces! file= /etc/config/InterfacesList.xml bRenew= 0 [iseDOM.cpp:2805]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'HTTP-Listener, ThreadID = 1991025760, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'HTTP-Listener', stack size = 131072, ThreadID = 1991025760, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Started HTTP server listener thread. {"HTTP-Listener"} [httpListener.cpp:76]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'HTTP-Server', stack size = 524288, ThreadID = 1990894688, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'HTTP-Server, ThreadID = 1990894688, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'HTTP-Server, ThreadID = 1987048544, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'HTTP-Server', stack size = 524288, ThreadID = 1987048544, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: starting web server id #1 [httpServer.cpp:654]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'HTTP-Server, ThreadID = 1986524256, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: starting web server id #2 [httpServer.cpp:654]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'HTTP-Server', stack size = 524288, ThreadID = 1986524256, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: starting web server id #3 [httpServer.cpp:654]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'HTTP-Server', stack size = 524288, ThreadID = 1985999968, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'HTTP-Server, ThreadID = 1985999968, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'HTTP-Server', stack size = 524288, ThreadID = 1985475680, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: starting web server id #4 [httpServer.cpp:654]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'HTTP-Server', stack size = 524288, ThreadID = 1984951392, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'HTTP-Server, ThreadID = 1985475680, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: starting web server id #5 [httpServer.cpp:654]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'HTTP-Server, ThreadID = 1984951392, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:35 homematic-ccu2 local0.info ReGaHss: Info: starting web server id #6 [httpServer.cpp:654]
Jul 9 23:48:36 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:36 homematic-ccu2 local0.info ReGaHss: Info: recvd 62 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:36 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:36 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:38 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:38 homematic-ccu2 local0.info ReGaHss: Info: recvd 586 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:38 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /index.htm [iseSession.cpp:185]
Jul 9 23:48:38 homematic-ccu2 local0.info ReGaHss: Info: IseSession Created: id: 7vOMkgKOWH Request URL: /index.htm [iseSession.cpp:127]
Jul 9 23:48:38 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:38 homematic-ccu2 local0.info ReGaHss: Info: recvd 603 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:38 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /index.htm?sid=@7vOMkgKOWH@ [iseSession.cpp:185]
Jul 9 23:48:38 homematic-ccu2 local0.debug ReGaHss: Verbose: IseESP::SetDOMModifiedFlag: flag is set to = 1 from Line = 3107 [iseESPexec.cpp:13167]
Jul 9 23:48:38 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:39 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:39 homematic-ccu2 local0.info ReGaHss: Info: recvd 464 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:39 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends plain file with 1150 bytes [httpServer.cpp:2607]
Jul 9 23:48:39 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:39 homematic-ccu2 local0.info ReGaHss: Info: recvd 594 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:39 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /pages/index.htm?sid=@7vOMkgKOWH@ [iseSession.cpp:185]
Jul 9 23:48:39 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:39 homematic-ccu2 local0.info ReGaHss: Info: recvd 588 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:39 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /login.htm?sid=@7vOMkgKOWH@ [iseSession.cpp:185]
Jul 9 23:48:39 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:40 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:40 homematic-ccu2 local0.info ReGaHss: Info: recvd 464 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:40 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends plain file with 1150 bytes [httpServer.cpp:2607]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: recvd 237 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'DpAsyncWriterThread, ThreadID = 1990370400, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'DpAsyncWriterThread', stack size = 131072, ThreadID = 1990370400, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: RegisterOnAddAsyncValueWriter: dwCookie = 1 [iseDOM.cpp:2999]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'DPPollingThread', stack size = 131072, ThreadID = 1984427104, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'DPPollingThread, ThreadID = 1984427104, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'ValueEventThread', stack size = 131072, ThreadID = 1984296032, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'ValueEventThread, ThreadID = 1984296032, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'EventThread', stack size = 131072, ThreadID = 1984164960, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'IseRTPrgThread', stack size = 131072, ThreadID = 1984033888, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:41 homematic-ccu2 local0.debug ReGaHss: Verbose: ValueEventThread::GenerateValueEventEntries: GetValueEventing add dp id = 1297 [iseRTValueEvent.cpp:385]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: RegisterOnValueChangeAll: dwCookie = 1 [iseDOM.cpp:3627]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'EventThread, ThreadID = 1984164960, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'IseRTPrgThread, ThreadID = 1984033888, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: RegisterOnRTUpdateEventHandler: dwCookie = 1 [iseDOM.cpp:3137]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: IseRTPrgThread thread function started [iseRTPrg.cpp:52]
Jul 9 23:48:41 homematic-ccu2 local0.info ReGaHss: Info: RegisterOnValueChangeAll: dwCookie = 2 [iseDOM.cpp:3627]
Jul 9 23:48:41 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jul 9 23:48:41 homematic-ccu2 local0.debug ReGaHss: Verbose: IseRTPrgThread thread: call RTUpdate and wait for = 30000 [iseRTPrg.cpp:75]
Jul 9 23:48:41 homematic-ccu2 local0.debug ReGaHss: Verbose: IseRT::OnRTUpdate: called for irt = 2 [iseRT.cpp:276]
Jul 9 23:48:41 homematic-ccu2 local0.debug ReGaHss: Verbose: IseRT::OnRTUpdate: wait TimerInitDPsComplete for = 30000 [iseRT.cpp:292]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'TimerThread, ThreadID = 1983902816, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'TimerThread', stack size = 131072, ThreadID = 1983902816, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: TimerThread::ThreadFunction: ISETIMEZONE = -3600 [iseRTTimer.cpp:81]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: HistoryRT::Start - allocating ring buffer for 3000 elements = 576000 bytes [iseRTHistory.cpp:97]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: FillTimerEventList: DST offset = 0 [iseRTTimer.cpp:423]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseRT::SetFinishedDPInitEvent: TimerInitDPsComplete event setting [iseRT.cpp:377]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: TimerThread::ThreadFunction() - no timer exists, so Wait (60 s) ! [iseRTTimer.cpp:209]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseRT::OnRTUpdate: wait TimerInitDPsComplete succeded with = 1 [iseRT.cpp:295]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseRTPrgThread thread: RTUpdate succeded [iseRTPrg.cpp:82]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseDOMPrg::SetState: called Program ID = 1312 'prgEnergyCounter_1294_000858A994AFCE:7' with valNew = '' ; oidTrigger = 65535 [iseDOMPrg.cpp:478]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'HistoryThread', stack size = 131072, ThreadID = 1983194208, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= HmIP-RF for ID=1009 [iseXmlRpc.cpp:2549]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'SchedulerThread', stack size = 131072, ThreadID = 1983063136, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'HistoryThread, ThreadID = 1983194208, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'CheckModifiedThread', stack size = 262144, ThreadID = 1982932064, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: HistoryRT::ThreadFunction start [iseRTHistory.cpp:151]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'SaveDOMThread', stack size = 131072, ThreadID = 1982669920, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: GetReadXmlrpcInterfaces is disabled. [iseRT.cpp:168]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: RegisterOnValueChangeAll: dwCookie = 3 [iseDOM.cpp:3627]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'HssThread', stack size = 131072, ThreadID = 1982538848, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'HssThread, ThreadID = 1982538848, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'XmlRpcClientThread', stack size = 131072, ThreadID = 1982407776, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'CheckModifiedThread, ThreadID = 1982932064, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: CheckModifiedThread function started [iseRTDOM.cpp:79]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'SchedulerThread, ThreadID = 1983063136, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: SchedulerRT thread function started [iseRTScheduler.cpp:454]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: RegisterOnScheduler: dwCookie = 1 [iseDOM.cpp:3090]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: SchedulerRT::ThreadFunction(): wait for event ms= 4294967295 [iseRTScheduler.cpp:481]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'SaveDOMThread, ThreadID = 1982669920, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: SaveDOMThread function started [iseRTDOM.cpp:181]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: RegisterOnRTSaveDOMHandler: dwCookie = 1 [iseDOM.cpp:3500]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: SaveDOMThread::ThreadFunction: wait for Event ms = 43200000 [iseRTDOM.cpp:200]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'XmlRpcClientThread, ThreadID = 1982407776, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: xml rpc client thread function started [iseRTHss.cpp:141]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= BidCos-RF for ID=1007 [iseXmlRpc.cpp:2549]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: hss thread function started [iseRTHss.cpp:54]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: HssThread::ThreadFunction(): bindAndListen to port=1999 [iseRTHss.cpp:67]
Jul 9 23:48:42 homematic-ccu2 user.debug rfd: PlatformInit()
Jul 9 23:48:42 homematic-ccu2 user.info rfd: 1007 support deleteDevices
Jul 9 23:48:42 homematic-ccu2 user.info rfd: 1007 support event
Jul 9 23:48:42 homematic-ccu2 user.info rfd: 1007 support listDevices
Jul 9 23:48:42 homematic-ccu2 user.info rfd: 1007 support newDevices
Jul 9 23:48:42 homematic-ccu2 user.info rfd: 1007 support replaceDevice
Jul 9 23:48:42 homematic-ccu2 user.info rfd: yes support replace device
Jul 9 23:48:42 homematic-ccu2 user.info rfd: 1007 support reportValueUsage
Jul 9 23:48:42 homematic-ccu2 user.info rfd: 1007 support setReadyConfig
Jul 9 23:48:42 homematic-ccu2 user.info rfd: 1007 support system.listMethods
Jul 9 23:48:42 homematic-ccu2 user.info rfd: 1007 support system.methodHelp
Jul 9 23:48:42 homematic-ccu2 user.info rfd: 1007 support updateDevice
Jul 9 23:48:42 homematic-ccu2 user.info rfd: 1007 support system.multicall
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::execute: List devices for interface id="1007" [iseXmlRpc.cpp:494]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: device = 1011 result= [ADDRESS:"BidCoS-RF",CHILDREN:{"BidCoS-RF:0","BidCoS-RF:1","BidCoS-RF:2","BidCoS-RF:3","BidCoS-RF:4","BidCoS-RF:5","BidCoS-RF:6","BidCoS-RF:7","BidCoS-RF:8"
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1012 valChannel= [ADDRESS:"BidCoS-RF:0",AES_ACTIVE:0,DIRECTION:0,FLAGS:3,INDEX:0,LINK_SOURCE_ROLES:"",LINK_TARGET_ROLES:"",PARAMSETS:{"MASTER","VALUES"},PARENT:"BidCoS-
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1014 valChannel= [ADDRESS:"BidCoS-RF:1",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:1,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES:"
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1018 valChannel= [ADDRESS:"BidCoS-RF:2",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:2,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES:"
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1022 valChannel= [ADDRESS:"BidCoS-RF:3",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:3,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES:"
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1026 valChannel= [ADDRESS:"BidCoS-RF:4",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:4,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES:"
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1030 valChannel= [ADDRESS:"BidCoS-RF:5",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:5,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES:"
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1034 valChannel= [ADDRESS:"BidCoS-RF:6",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:6,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES:"
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1038 valChannel= [ADDRESS:"BidCoS-RF:7",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:7,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES:"
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1042 valChannel= [ADDRESS:"BidCoS-RF:8",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:8,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES:"
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1046 valChannel= [ADDRESS:"BidCoS-RF:9",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:9,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES:"
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1050 valChannel= [ADDRESS:"BidCoS-RF:10",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:10,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1054 valChannel= [ADDRESS:"BidCoS-RF:11",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:11,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1058 valChannel= [ADDRESS:"BidCoS-RF:12",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:12,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1062 valChannel= [ADDRESS:"BidCoS-RF:13",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:13,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1066 valChannel= [ADDRESS:"BidCoS-RF:14",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:14,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1070 valChannel= [ADDRESS:"BidCoS-RF:15",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:15,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1074 valChannel= [ADDRESS:"BidCoS-RF:16",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:16,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1078 valChannel= [ADDRESS:"BidCoS-RF:17",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:17,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1082 valChannel= [ADDRESS:"BidCoS-RF:18",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:18,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1086 valChannel= [ADDRESS:"BidCoS-RF:19",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:19,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1090 valChannel= [ADDRESS:"BidCoS-RF:20",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:20,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1094 valChannel= [ADDRESS:"BidCoS-RF:21",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:21,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1098 valChannel= [ADDRESS:"BidCoS-RF:22",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:22,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1102 valChannel= [ADDRESS:"BidCoS-RF:23",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:23,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1106 valChannel= [ADDRESS:"BidCoS-RF:24",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:24,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1110 valChannel= [ADDRESS:"BidCoS-RF:25",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:25,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1114 valChannel= [ADDRESS:"BidCoS-RF:26",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:26,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1118 valChannel= [ADDRESS:"BidCoS-RF:27",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:27,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1122 valChannel= [ADDRESS:"BidCoS-RF:28",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:28,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1126 valChannel= [ADDRESS:"BidCoS-RF:29",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:29,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1130 valChannel= [ADDRESS:"BidCoS-RF:30",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:30,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1134 valChannel= [ADDRESS:"BidCoS-RF:31",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:31,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1138 valChannel= [ADDRESS:"BidCoS-RF:32",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:32,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1142 valChannel= [ADDRESS:"BidCoS-RF:33",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:33,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1146 valChannel= [ADDRESS:"BidCoS-RF:34",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:34,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1150 valChannel= [ADDRESS:"BidCoS-RF:35",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:35,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1154 valChannel= [ADDRESS:"BidCoS-RF:36",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:36,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1158 valChannel= [ADDRESS:"BidCoS-RF:37",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:37,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1162 valChannel= [ADDRESS:"BidCoS-RF:38",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:38,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1166 valChannel= [ADDRESS:"BidCoS-RF:39",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:39,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1170 valChannel= [ADDRESS:"BidCoS-RF:40",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:40,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000858A994AFCE:7","ENERGY_COUNTER"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER"] [iseXmlRpc
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1174 valChannel= [ADDRESS:"BidCoS-RF:41",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:41,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jul 9 23:48:42 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseSingleCondition::Evaluate: DP_VALUE_CHECK_UPDATE is set, condition = 1 [iseCondition.cpp:506]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseSingleCondition::Evaluate: type = DP_GREATEROREQUAL, condition valL = 0.000000 valR1 = 0.000000 [iseCondition.cpp:320]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseCondition::Evaluate: sc = 0, condition result = 1 [iseCondition.cpp:1119]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseRule::Evaluate: c = 0, condition result = 1 [iseRule.cpp:235]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseDOMPrg::SetState: Rule evaluated state is TRUE by Program ID = 1312 'prgEnergyCounter_1294_000858A994AFCE:7'; Destination ID = 1314 [iseDOMPrg.cpp:501]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: IseDOMPrg::SetState: Program ID = 1312 'prgEnergyCounter_1294_000858A994AFCE:7', rule's trigger flags = 2 [iseDOMPrg.cpp:515]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseDOMPrg::Execute: execute Program ID = 1312 'prgEnergyCounter_1294_000858A994AFCE:7'; Destination ID = 1314 [iseDOMPrg.cpp:611]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseDOMPrg::Execute: start execute Destination within the trigger delay 0 [iseDOMPrg.cpp:615]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: SchedulerRT::Add: added script element - id= 1314; time= 0 [iseRTScheduler.cpp:343]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseDOMPrg::Execute: pDest->ExecuteDestination succeeded from Program ID = 1312 'prgEnergyCounter_1294_000858A994AFCE:7' with valNew = '' [iseDOMPrg.cpp:625]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= HmIP-RF for ID=1009 [iseXmlRpc.cpp:2549]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1178 valChannel= [ADDRESS:"BidCoS-RF:42",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:42,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1182 valChannel= [ADDRESS:"BidCoS-RF:43",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:43,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1186 valChannel= [ADDRESS:"BidCoS-RF:44",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:44,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1190 valChannel= [ADDRESS:"BidCoS-RF:45",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:45,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1194 valChannel= [ADDRESS:"BidCoS-RF:46",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:46,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1198 valChannel= [ADDRESS:"BidCoS-RF:47",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:47,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1202 valChannel= [ADDRESS:"BidCoS-RF:48",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:48,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1206 valChannel= [ADDRESS:"BidCoS-RF:49",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:49,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1210 valChannel= [ADDRESS:"BidCoS-RF:50",AES_ACTIVE:0,DIRECTION:1,FLAGS:1,INDEX:50,LINK_SOURCE_ROLES:"KEYMATIC REMOTECONTROL_RECEIVER SWITCH WINMATIC",LINK_TARGET_ROLES
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: result= {[ADDRESS:"BidCoS-RF",CHILDREN:{"BidCoS-RF:0","BidCoS-RF:1","BidCoS-RF:2","BidCoS-RF:3","BidCoS-RF:4","BidCoS-RF:5","BidCoS-RF:6","BidCoS-RF:7","BidCoS-RF:8","BidCoS-RF:9
Jul 9 23:48:42 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000858A994AFCE:7","ENERGY_COUNTER_OVERFLOW"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: ENERGY_COUNTER_OVE
Jul 9 23:48:42 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jul 9 23:48:42 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: SchedulerRT::Execute -> ExecuteScript: id = 1314; ticks = 10 [iseRTScheduler.cpp:601]
Jul 9 23:48:42 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: SchedulerRT::ThreadFunction(): wait for event ms= 4294967295 [iseRTScheduler.cpp:481]
Jul 9 23:48:42 homematic-ccu2 user.debug rfd: GetAvailableFirmware for HM-RCV-50
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =init params = {"xmlrpc_bin://127.0.0.1:1999","1007"} result = "" [iseXmlRpc.cpp:2610]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::CallInit: params = {"xmlrpc_bin://127.0.0.1:1999","1007"} [iseXmlRpc.cpp:1209]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcClientThread::ThreadFunction(): call init for interface=BidCos-RF [iseRTHss.cpp:159]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= VirtualDevices for ID=1008 [iseXmlRpc.cpp:2549]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::execute: List devices for interface id="1008" [iseXmlRpc.cpp:494]
Jul 9 23:48:42 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: result= nil [iseXmlRpc.cpp:629]
Jul 9 23:48:42 homematic-ccu2 user.debug multimac: C<: #19 TRX GetDutyCycle
Jul 9 23:48:42 homematic-ccu2 user.debug multimac: C< @80115: bin:FD 00 03 01 13 03 72 1E
Jul 9 23:48:42 homematic-ccu2 user.debug multimac: C> @80219: #19 TRX Response Ack 02
Jul 9 23:48:42 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.0 ) = 0
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: recvd 773 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /login.htm?sid=@7vOMkgKOWH@ [iseSession.cpp:185]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /login.htm?sid=@7vOMkgKOWH@ [iseSession.cpp:185]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: recvd 620 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /pages/index.htm?sid=@7vOMkgKOWH@ [iseSession.cpp:185]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: recvd 257 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: recvd 173 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:45 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 237 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 800 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /pages/tabs/startpage.htm?sid=@7vOMkgKOWH@ [iseSession.cpp:185]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= HmIP-RF for ID=1009 [iseXmlRpc.cpp:2549]
Jul 9 23:48:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"000858A994AFCE:4","STATE"} result= [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"] [iseXmlRpc.cpp:2605]
Jul 9 23:48:46 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Jul 9 23:48:46 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0 [iseDOMdpHSS.cpp:130]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 62 bytes by web server #2 [httpServer.cpp:764]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #2 [httpServer.cpp:764]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:46 homematic-ccu2 user.debug rfd: GetAvailableFirmware for HM-RCV-50
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:47 homematic-ccu2 local0.info ReGaHss: Info: Create thread 'HssComTestThread', stack size = 131072, ThreadID = 1982276704, Called-PID = 376 [iseSysLx.cpp:1025]
Jul 9 23:48:47 homematic-ccu2 local0.info ReGaHss: Info: Start thread 'HssComTestThread, ThreadID = 1982276704, PID = 376 [iseSysLx.cpp:1193]
Jul 9 23:48:47 homematic-ccu2 local0.info ReGaHss: Info: HssComTestThread thread function started [iseRTHss.cpp:206]
Jul 9 23:48:47 homematic-ccu2 local0.info ReGaHss: Info: HssComTestThread: RegisterOnChange succeeded [iseRTHss.cpp:210]
Jul 9 23:48:47 homematic-ccu2 local0.info ReGaHss: Info: HssComTestThread: clear all running IDs [iseRTHss.cpp:222]
Jul 9 23:48:49 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:49 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:49 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:48:49 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:50 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:50 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:50 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:50 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =init params = {"xmlrpc_bin://127.0.0.1:1999","1008"} result = "" [iseXmlRpc.cpp:2610]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::CallInit: params = {"xmlrpc_bin://127.0.0.1:1999","1008"} [iseXmlRpc.cpp:1209]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcClientThread::ThreadFunction(): call init for interface=VirtualDevices [iseRTHss.cpp:159]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= HmIP-RF for ID=1009 [iseXmlRpc.cpp:2549]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::CallXmlrpcMethod: method =init params = {"xmlrpc_bin://127.0.0.1:1999","1009"} result = "" [iseXmlRpc.cpp:2610]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::CallInit: params = {"xmlrpc_bin://127.0.0.1:1999","1009"} [iseXmlRpc.cpp:1209]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcClientThread::ThreadFunction(): call init for interface=HmIP-RF [iseRTHss.cpp:159]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: xml rpc client thread function stopped [iseRTHss.cpp:169]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: Thread 'XmlRpcClientThread' exited with return code 0. [iseSysLx.cpp:1202]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: ThreadContext delete. [iseSysLx.cpp:1172]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::execute: List devices for interface id="1009" [iseXmlRpc.cpp:494]
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: device = 1238 result= [ADDRESS:"000858A994AFCE",AES_ACTIVE:1,AVAILABLE_FIRMWARE:"0.0.0",CHILDREN:{"000858A994AFCE:0","000858A994AFCE:1","000858A994AFCE:2","000858A994AFCE:3","000
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1239 valChannel= [ADDRESS:"000858A994AFCE:0",AES_ACTIVE:1,AVAILABLE_FIRMWARE:"",CHILDREN:{},DIRECTION:0,FIRMWARE:"",FIRMWARE_UPDATE_STATE:"",FLAGS:1,GROUP:"",INDEX:0,IN
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1265 valChannel= [ADDRESS:"000858A994AFCE:1",AES_ACTIVE:1,AVAILABLE_FIRMWARE:"",CHILDREN:{},DIRECTION:1,FIRMWARE:"",FIRMWARE_UPDATE_STATE:"",FLAGS:1,GROUP:"",INDEX:1,IN
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1268 valChannel= [ADDRESS:"000858A994AFCE:2",AES_ACTIVE:1,AVAILABLE_FIRMWARE:"",CHILDREN:{},DIRECTION:1,FIRMWARE:"",FIRMWARE_UPDATE_STATE:"",FLAGS:1,GROUP:"",INDEX:2,IN
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1271 valChannel= [ADDRESS:"000858A994AFCE:3",AES_ACTIVE:1,AVAILABLE_FIRMWARE:"",CHILDREN:{},DIRECTION:0,FIRMWARE:"",FIRMWARE_UPDATE_STATE:"",FLAGS:1,GROUP:"",INDEX:3,IN
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1276 valChannel= [ADDRESS:"000858A994AFCE:4",AES_ACTIVE:1,AVAILABLE_FIRMWARE:"",CHILDREN:{},DIRECTION:2,FIRMWARE:"",FIRMWARE_UPDATE_STATE:"",FLAGS:1,GROUP:"",INDEX:4,IN
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1282 valChannel= [ADDRESS:"000858A994AFCE:5",AES_ACTIVE:1,AVAILABLE_FIRMWARE:"",CHILDREN:{},DIRECTION:2,FIRMWARE:"",FIRMWARE_UPDATE_STATE:"",FLAGS:1,GROUP:"",INDEX:5,IN
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1288 valChannel= [ADDRESS:"000858A994AFCE:6",AES_ACTIVE:1,AVAILABLE_FIRMWARE:"",CHILDREN:{},DIRECTION:2,FIRMWARE:"",FIRMWARE_UPDATE_STATE:"",FLAGS:1,GROUP:"",INDEX:6,IN
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1294 valChannel= [ADDRESS:"000858A994AFCE:7",AES_ACTIVE:1,AVAILABLE_FIRMWARE:"",CHILDREN:{},DIRECTION:0,FIRMWARE:"",FIRMWARE_UPDATE_STATE:"",FLAGS:1,GROUP:"",INDEX:7,IN
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1305 valChannel= [ADDRESS:"000858A994AFCE:8",AES_ACTIVE:1,AVAILABLE_FIRMWARE:"",CHILDREN:{},DIRECTION:1,FIRMWARE:"",FIRMWARE_UPDATE_STATE:"",FLAGS:1,GROUP:"",INDEX:8,IN
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: channel = 1306 valChannel= [ADDRESS:"000858A994AFCE:9",AES_ACTIVE:1,AVAILABLE_FIRMWARE:"",CHILDREN:{},DIRECTION:0,FIRMWARE:"",FIRMWARE_UPDATE_STATE:"",FLAGS:1,GROUP:"",INDEX:9,IN
Jul 9 23:48:52 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodListDevices::GetDevicesData: result= {[ADDRESS:"000858A994AFCE",AES_ACTIVE:1,AVAILABLE_FIRMWARE:"0.0.0",CHILDREN:{"000858A994AFCE:0","000858A994AFCE:1","000858A994AFCE:2","000858A994AFCE:3","000858A994AFCE:4
Jul 9 23:48:52 homematic-ccu2 user.debug multimac: C<: #20 TRX GetDutyCycle
Jul 9 23:48:52 homematic-ccu2 user.debug multimac: C< @90115: bin:FD 00 03 01 14 03 E0 1D
Jul 9 23:48:52 homematic-ccu2 user.debug multimac: C> @90219: #20 TRX Response Ack 02
Jul 9 23:48:52 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.0 ) = 0
Jul 9 23:48:55 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:55 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:55 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:48:55 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:55 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:55 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:55 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:48:55 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:48:58 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:48:58 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:48:58 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:48:58 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:00 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:00 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:00 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:00 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:01 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:01 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:01 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:01 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:02 homematic-ccu2 user.debug multimac: C<: #21 TRX GetDutyCycle
Jul 9 23:49:02 homematic-ccu2 user.debug multimac: C< @100115: bin:FD 00 03 01 15 03 66 1E
Jul 9 23:49:02 homematic-ccu2 user.debug multimac: C> @100220: #21 TRX Response Ack 02
Jul 9 23:49:02 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.0 ) = 0
Jul 9 23:49:04 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:04 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:04 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:04 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:06 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:06 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:06 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:06 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:07 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:07 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:07 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:07 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:10 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:10 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:10 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:10 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:11 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:11 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:11 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:11 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:12 homematic-ccu2 user.debug multimac: C<: #22 TRX GetDutyCycle
Jul 9 23:49:12 homematic-ccu2 user.debug multimac: C< @110115: bin:FD 00 03 01 16 03 6C 1E
Jul 9 23:49:12 homematic-ccu2 user.debug multimac: C> @110220: #22 TRX Response Ack 02
Jul 9 23:49:12 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.0 ) = 0
Jul 9 23:49:13 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:13 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:13 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:13 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:16 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:16 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:16 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:16 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:16 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:16 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:16 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:16 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:16 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:16 homematic-ccu2 local0.info ReGaHss: Info: recvd 62 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:16 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:16 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:18 homematic-ccu2 user.debug multimac: C> @116283: #1 LLMAC RX @11403ms -66dBm 97 86 70 37 50 00 00 00 00 00 AA 2F
Jul 9 23:49:18 homematic-ccu2 user.debug multimac: Bidcos RX: #97[BC|Ren|WMup] 375000->000000 WeatherData: 00 AA 2F
Jul 9 23:49:18 homematic-ccu2 user.debug multimac: GetAckActionForIncomingTelegram(): Unknown peer, AckAction_NotForUs
Jul 9 23:49:18 homematic-ccu2 user.debug multimac: A<: #11 HmBidcos RxTelegram AuthNone #97[BC|Ren|WMup] 375000->000000 WeatherData: 00 AA 2F
Jul 9 23:49:19 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:19 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:19 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:19 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:21 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:21 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:21 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:21 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:22 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:22 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:22 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:22 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:22 homematic-ccu2 user.debug multimac: C<: #23 TRX GetDutyCycle
Jul 9 23:49:22 homematic-ccu2 user.debug multimac: C< @120115: bin:FD 00 03 01 17 03 EA 1D
Jul 9 23:49:22 homematic-ccu2 user.debug multimac: C> @120219: #23 TRX Response Ack 02
Jul 9 23:49:22 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.0 ) = 0
Jul 9 23:49:25 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:25 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:25 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:25 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:26 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:26 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:26 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:26 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:28 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:28 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:28 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:28 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:31 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:31 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:31 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:31 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:31 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:31 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:31 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:31 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:32 homematic-ccu2 user.debug multimac: C<: #24 TRX GetDutyCycle
Jul 9 23:49:32 homematic-ccu2 user.debug multimac: C< @130116: bin:FD 00 03 01 18 03 C8 1D
Jul 9 23:49:32 homematic-ccu2 user.debug multimac: C> @130220: #24 TRX Response Ack 02
Jul 9 23:49:32 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.0 ) = 0
Jul 9 23:49:34 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:34 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:34 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:34 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:36 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:36 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:36 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:36 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:37 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:37 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:37 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:37 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:40 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:40 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:40 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:40 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:41 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:41 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:41 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:41 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:42 homematic-ccu2 local0.debug ReGaHss: Verbose: TimerThread::ThreadFunction: ISETIMEZONE = -3600 [iseRTTimer.cpp:81]
Jul 9 23:49:42 homematic-ccu2 local0.debug ReGaHss: Verbose: FillTimerEventList: DST offset = 0 [iseRTTimer.cpp:423]
Jul 9 23:49:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseRT::SetFinishedDPInitEvent: TimerInitDPsComplete event setting [iseRT.cpp:377]
Jul 9 23:49:42 homematic-ccu2 local0.info ReGaHss: Info: TimerThread::ThreadFunction() - no timer exists, so Wait (60 s) ! [iseRTTimer.cpp:209]
Jul 9 23:49:42 homematic-ccu2 user.debug multimac: C<: #25 TRX GetDutyCycle
Jul 9 23:49:42 homematic-ccu2 user.debug multimac: C< @140116: bin:FD 00 03 01 19 03 4E 1E
Jul 9 23:49:42 homematic-ccu2 user.debug multimac: C> @140220: #25 TRX Response Ack 02
Jul 9 23:49:42 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.0 ) = 0
Jul 9 23:49:43 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:43 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:43 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:43 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:46 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:46 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:46 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:46 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:47 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:47 homematic-ccu2 local0.info ReGaHss: Info: recvd 62 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:47 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:47 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:49 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:49 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:49 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:49 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:49 homematic-ccu2 user.debug multimac: C> @147090: #1 TRX CMD=0B 00 01
Jul 9 23:49:49 homematic-ccu2 user.warn multimac: Bad cast: std::bad_cast
Jul 9 23:49:49 homematic-ccu2 user.debug multimac: A<: #9 TRX CMD=0B 00 01
Jul 9 23:49:49 homematic-ccu2 user.debug multimac: A>: #49 TRX CMD=0A
Jul 9 23:49:49 homematic-ccu2 user.debug multimac: MacController::OnDownstreamFrame(#49 TRX CMD=0A )
Jul 9 23:49:49 homematic-ccu2 user.debug multimac: C<: #26 TRX CMD=0A
Jul 9 23:49:49 homematic-ccu2 user.debug multimac: C< @147105: bin:FD 00 03 01 1A 0A 44 28
Jul 9 23:49:49 homematic-ccu2 user.debug multimac: C> @147209: #26 TRX Response Ack 00
Jul 9 23:49:49 homematic-ccu2 user.debug multimac: A<: #49 TRX Response Ack 00
Jul 9 23:49:51 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:51 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:51 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:51 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:52 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:52 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:52 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:52 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:52 homematic-ccu2 user.debug multimac: C<: #27 TRX GetDutyCycle
Jul 9 23:49:52 homematic-ccu2 user.debug multimac: C< @150117: bin:FD 00 03 01 1B 03 C2 1D
Jul 9 23:49:52 homematic-ccu2 user.debug multimac: C> @150221: #27 TRX Response Ack 02
Jul 9 23:49:52 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.0 ) = 0
Jul 9 23:49:55 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:55 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:55 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:55 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:56 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:56 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:56 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:49:56 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:49:58 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:49:58 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:49:58 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:49:58 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:01 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:01 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:01 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:50:01 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:01 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:01 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:01 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:01 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:02 homematic-ccu2 user.debug multimac: C<: #28 TRX GetDutyCycle
Jul 9 23:50:02 homematic-ccu2 user.debug multimac: C< @160117: bin:FD 00 03 01 1C 03 50 1E
Jul 9 23:50:02 homematic-ccu2 user.debug multimac: C> @160221: #28 TRX Response Ack 02
Jul 9 23:50:02 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.0 ) = 0
Jul 9 23:50:02 homematic-ccu2 user.debug multimac: C> @160291: #2 LLMAC RX @22640ms -87dBm 3D 84 5E 2E A7 BA 00 00 00 92 73 E3 00 0D C0 00 BF 09 56 03
Jul 9 23:50:02 homematic-ccu2 user.debug multimac: Bidcos RX: #3D[BC|Ren] 2EA7BA->000000 EnergyCyclic: 92 73 E3 00 0D C0 00 BF 09 56 03
Jul 9 23:50:02 homematic-ccu2 user.debug multimac: GetAckActionForIncomingTelegram(): Unknown peer, AckAction_NotForUs
Jul 9 23:50:02 homematic-ccu2 user.debug multimac: A<: #18 HmBidcos RxTelegram AuthNone #3D[BC|Ren] 2EA7BA->000000 EnergyCyclic: 92 73 E3 00 0D C0 00 BF 09 56 03
Jul 9 23:50:04 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:04 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:04 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:50:04 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:06 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:06 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:06 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:06 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:07 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:07 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:07 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:50:07 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:10 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:10 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:10 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:50:10 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:11 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:11 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:11 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:11 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:12 homematic-ccu2 user.debug multimac: C<: #29 TRX GetDutyCycle
Jul 9 23:50:12 homematic-ccu2 user.debug multimac: C< @170117: bin:FD 00 03 01 1D 03 D6 1D
Jul 9 23:50:12 homematic-ccu2 user.debug multimac: C> @170220: #29 TRX Response Ack 02
Jul 9 23:50:12 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.0 ) = 0
Jul 9 23:50:13 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:13 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:13 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:50:13 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:15 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:15 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:15 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:15 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:16 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:16 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:16 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:50:16 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:17 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:17 homematic-ccu2 local0.info ReGaHss: Info: recvd 62 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:17 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:17 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:19 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:19 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:19 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:50:19 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:20 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:20 homematic-ccu2 local0.info ReGaHss: Info: recvd 800 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:20 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /pages/tabs/startpage.htm?sid=@7vOMkgKOWH@ [iseSession.cpp:185]
Jul 9 23:50:20 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:20 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:20 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:20 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:20 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:22 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:22 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:22 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:50:22 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:22 homematic-ccu2 user.debug multimac: C<: #30 TRX GetDutyCycle
Jul 9 23:50:22 homematic-ccu2 user.debug multimac: C< @180117: bin:FD 00 03 01 1E 03 DC 1D
Jul 9 23:50:22 homematic-ccu2 user.debug multimac: C> @180221: #30 TRX Response Ack 02
Jul 9 23:50:22 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.0 ) = 0
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: recvd 817 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: recvd 100 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: recvd 104 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: recvd 87 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:25 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:26 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:26 homematic-ccu2 local0.info ReGaHss: Info: recvd 100 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:26 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:26 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 9 23:50:26 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 9 23:50:26 homematic-ccu2 local0.info ReGaHss: Info: recvd 104 bytes by web server #1 [httpServer.cpp:764]
Jul 9 23:50:26 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 9 23:50:26 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
***** hmserver.log *****
Jul 9 23:48:11 de.eq3.lib.util.dynamics.GenericFactory INFO [main] @GenericFactory
Jul 9 23:48:11 de.eq3.lib.util.dynamics.GenericFactory INFO [main] creating instance of HMServerConfiguration with no-arg constructor
Jul 9 23:48:16 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN [Thread-0] Invalid state parameter or subtype: Parameter ERROR_POWER_SHORT_CIRCUIT_BUS_1 subtype=default
Jul 9 23:48:16 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN [Thread-0] Invalid state parameter or subtype: Parameter ERROR_POWER_SHORT_CIRCUIT_BUS_2 subtype=default
Jul 9 23:48:16 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN [Thread-0] Invalid state parameter or subtype: Parameter ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_1 subtype=default
Jul 9 23:48:16 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN [Thread-0] Invalid state parameter or subtype: Parameter ERROR_SHORT_CIRCUIT_DATA_LINE_BUS_2 subtype=default
Jul 9 23:48:16 de.eq3.cbcs.devicedescription.ChannelTypeDescription WARN [Thread-0] Invalid state parameter or subtype: Parameter ERROR_BUS_CONFIG_MISMATCH subtype=default
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [HMIPTRXWriterWorker] (1) *worker
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [KeyServerWorker] (1) *worker
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [KryoPersistenceWorker] (1) *worker
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [TransactionSubsystemHandler] (1) *worker
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [FirmwareLoaderFileSystem] (1) *worker
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LocalServerPersistentDataLoader] (1)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LocalServerAdapterInitialization] (1)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [BackendCommandHandler] (1)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [DeviceInclusionAcceptHandler] (1)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [CheckDeviceExistHandler] (1)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [IncomingHMIPFrameHandler] (1)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [DeviceBackgroundUpdateSubsystem] (1)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [DeviceLiveUpdateSubsystem] (1)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [DeviceInclusionDefaultConfigurationChanger] (1)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [CyclicSmokeDetectorAwakening] (1)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LocalServerFirmwareUpdateInitialization] (1)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyNotificationHandler] (1) *worker
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyAPIWorker] (1) *worker
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyBackendNotificationHandler] (3) *worker
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyBlindLevelCorrectionHandler] (1) *worker
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: added for deployment [LegacyInitializion] (1)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: deploying 21 classes to Vert.x
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: 21 VertxDeployers initialized
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-0] SYSTEM: start of CyclicSmokeDetectorAwakening succeeded (c9a9868c-1ea0-4c97-ba75-00259769388d)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of DeviceInclusionDefaultConfigurationChanger succeeded (24efec5a-bfc7-493b-8f9a-6e919b53bd7a)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-7] SYSTEM: start of CheckDeviceExistHandler succeeded (02e8f0d9-f646-4e62-9327-f722b11bdfaf)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of HMIPTRXWriterWorker succeeded (f3420bab-894a-4b35-983d-1dd3241c5ecb)
Jul 9 23:48:16 de.eq3.cbcs.server.core.vertx.KeyServerWorker ERROR [vert.x-worker-thread-3] Missing key server configuration parameter (Network.Key) for mode: KEYSERVER_LOCAL
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-5] SYSTEM: start of TransactionSubsystemHandler succeeded (4a71c2db-6fce-45a0-8960-00d88b60a953)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-3] SYSTEM: start of KeyServerWorker succeeded (f2e56513-93ab-4d7d-8f5e-f019aae183cb)
Jul 9 23:48:16 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of LegacyBlindLevelCorrectionHandler succeeded (9074339a-a899-45a6-9157-a70c73612294)
Jul 9 23:48:21 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-7] SYSTEM: start of KryoPersistenceWorker succeeded (0d0fe4a0-191e-46ac-95f6-8747b33c688b)
Jul 9 23:48:21 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of LocalServerPersistentDataLoader succeeded (e0fc9256-dceb-46b2-8a94-cb21c82788e5)
Jul 9 23:48:21 de.eq3.cbcs.server.core.live_otau.DeviceLiveUpdateSubsystem INFO [vert.x-eventloop-thread-6] SYSTEM: DeviceLiveUpdateSubsystem started
Jul 9 23:48:21 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-6] SYSTEM: start of DeviceBackgroundUpdateSubsystem succeeded (0ecffcdc-de08-440d-a110-c20eb0643dad)
Jul 9 23:48:21 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-6] SYSTEM: start of DeviceLiveUpdateSubsystem succeeded (334ae67a-42db-432b-bd8f-24eb637f2f43)
Jul 9 23:48:22 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of IncomingHMIPFrameHandler succeeded (16b5933d-9270-45ba-89ca-a69e1f06a38a)
Jul 9 23:48:22 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-5] SYSTEM: start of DeviceInclusionAcceptHandler succeeded (d7a2ecf1-f3cc-45e6-b144-191c3a4e944b)
Jul 9 23:48:22 de.eq3.cbcs.server.core.otau.util.FirmwareLoaderFileSystem INFO [vert.x-worker-thread-2] SYSTEM: Firmware update directory is set to /etc/config/firmware
Jul 9 23:48:22 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-0] SYSTEM: start of FirmwareLoaderFileSystem succeeded (88acdb8f-23ce-43f4-a0a7-e29f82cd54ae)
Jul 9 23:48:22 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of LegacyBackendNotificationHandler succeeded (c4a99ab7-539f-4a4b-a568-4643b7e39fe2)
Jul 9 23:48:22 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of BackendCommandHandler succeeded (34f9a418-6c4f-48b4-9e61-d6555c580247)
Jul 9 23:48:22 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of LegacyNotificationHandler succeeded (2bf7dc72-896e-4825-b46d-146434fd563e)
Jul 9 23:48:22 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-0] SYSTEM: start of LegacyAPIWorker succeeded (47c718f8-0b1e-4a83-8bdf-a3c04de40a5b)
Jul 9 23:48:22 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-6] SYSTEM: start of LocalServerAdapterInitialization succeeded (0f52c183-61d7-4799-8e43-3b5ba1f32275)
Jul 9 23:48:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] TRX adapter state 1: HMIP_TRX_App
Jul 9 23:48:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] TRX adapter application is already running or started
Jul 9 23:48:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] No NWK, try to set address ...
Jul 9 23:48:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Try to set radio address 11639505...
Jul 9 23:48:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Set max send attempts for 3014F711A0001F58A99300C3 to 3
Jul 9 23:48:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Try to get application version...
Jul 9 23:48:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Application version 3.4.8
Jul 9 23:48:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Bootloader version 1.0.1
Jul 9 23:48:22 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] hmos version 1.34.0
Jul 9 23:48:23 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] MCU type: CC1310
Jul 9 23:48:23 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Duty Cycle: 1.0
Jul 9 23:48:23 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] set DutyCycle limit to ffffffc8
Jul 9 23:48:23 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Set Duty Cycle Limit
Jul 9 23:48:23 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Current Security Counter: 310404352
Jul 9 23:48:23 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Update security counter to calculation: 310405412
Jul 9 23:48:23 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] TRX adapter has no linkpartner
Jul 9 23:48:23 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-2] SYSTEM ADVICE: pre-conditions for deployment of LocalServerFirmwareUpdateInitialization still not met - check deployment configuration (still unfulfilled: [connector.open])
Jul 9 23:48:23 de.eq3.cbcs.vertx.management.VertxManager WARN [vert.x-eventloop-thread-5] SYSTEM ADVICE: pre-conditions for deployment of LegacyInitializion still not met - check deployment configuration (still unfulfilled: [connector.open])
Jul 9 23:48:24 de.eq3.cbcs.server.local.base.internal.HMIPTRXInitialResponseListener INFO [Thread-6] Adapter with Access Point id 3014F711A0001F58A99300C3 initialized
Jul 9 23:48:24 de.eq3.cbcs.server.local.base.internal.LocalServerAdapterInitialization INFO [Thread-6] HMIPTRXInitialResponseListener said that Adapter was initialized
Jul 9 23:48:25 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of LegacyInitializion succeeded (c3f2fe81-c106-4f7f-83d2-add65cf0d149)
Jul 9 23:48:25 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-3] SYSTEM: start of LocalServerFirmwareUpdateInitialization succeeded (35e748e2-c70a-426d-aa82-63625e470acd)
Jul 9 23:48:25 de.eq3.cbcs.server.core.otau.util.FirmwareLoaderFileSystem WARN [vert.x-worker-thread-1] SYSTEM: Firmware update directory in config file is no valid directory: /etc/config/firmware
Jul 9 23:48:25 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-1] SYSTEM: Checking all devices on all accesspoints for updates
Jul 9 23:48:25 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-1] SYSTEM: There are 0 APs queued with updatable devices
Jul 9 23:48:25 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-0] SYSTEM: initial deployment complete _____________________________________________________
Jul 9 23:48:26 de.eq3.cbcs.server.local.LocalServer INFO [Thread-0] SYSTEM: Bind XML-RPC api to port 2010
Jul 9 23:48:26 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Default MaxEventLoopExecuteTime: 2000000000
Jul 9 23:48:26 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Default BlockedThreadCheckInterval: 1000
Jul 9 23:48:26 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Default MaxWorkerExecuteTime: 60000000000
Jul 9 23:48:26 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Default EventLoopPoolSize: 8
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: added for deployment [BackendWorker] (1) *worker
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: added for deployment [GroupRequestWorker] (1) *worker
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: added for deployment [DiagramRequestWorker] (1) *worker
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: added for deployment [StorageRequestWorker] (1) *worker
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: added for deployment [DeviceFirmwareRequestWorker] (1) *worker
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: added for deployment [EnergyPriceRequestWorker] (1) *worker
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: added for deployment [CouplingRequestWorker] (1) *worker
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: added for deployment [RegaClientWorker] (1) *worker
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: added for deployment [GroupConfigurationPersistenceFileSystem] (1) *worker
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: added for deployment [HmIPGatewayManagementRequestWorker] (1) *worker
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: deploying 10 classes to Vert.x
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: 10 VertxDeployers initialized
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-3] SYSTEM: start of EnergyPriceRequestWorker succeeded (c2513562-e302-40f7-8764-09e40a92771c)
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-3] SYSTEM: start of CouplingRequestWorker succeeded (bfe87813-4835-4a59-be83-63279f75533b)
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of GroupConfigurationPersistenceFileSystem succeeded (e95e2ebf-0afe-40b2-a285-c6ee63767ae9)
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-2] SYSTEM: start of BackendWorker succeeded (dadcdd87-97b0-4585-9688-f0155f807150)
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-5] SYSTEM: start of RegaClientWorker succeeded (7e444d92-33ed-4e0f-a75a-7454cebdbf32)
Jul 9 23:48:26 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of StorageRequestWorker succeeded (c4698be6-6a18-4ed9-846e-43352dc440dc)
Jul 9 23:48:27 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-1] SYSTEM: start of GroupRequestWorker succeeded (51266079-a815-40e3-bbde-b60cf74bbc65)
Jul 9 23:48:27 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-3] SYSTEM: start of DiagramRequestWorker succeeded (4e2933b7-2115-4b9b-84cd-6ca97772ee37)
Jul 9 23:48:27 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-4] SYSTEM: start of DeviceFirmwareRequestWorker succeeded (b71b8159-b503-487b-ace2-c2353ed8f0b5)
Jul 9 23:48:30 de.eq3.cbcs.vertx.management.VertxManager INFO [vert.x-eventloop-thread-3] SYSTEM: start of HmIPGatewayManagementRequestWorker succeeded (bc3f24dc-a056-4260-9d2b-8eb00a63e0e4)
Jul 9 23:48:30 de.eq3.cbcs.vertx.management.VertxManager INFO [Thread-1] SYSTEM: initial deployment complete _____________________________________________________
Jul 9 23:48:30 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Starting HMServer at 127.0.0.1:9292
Jul 9 23:48:30 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Read Configuration
Jul 9 23:48:30 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create Bidcos Dispatcher
Jul 9 23:48:30 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] InitBidCosCache
Jul 9 23:48:31 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create groupDefinitionProvider
Jul 9 23:48:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create VirtualDeviceHolder
Jul 9 23:48:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create VirtualDeviceHandlerRega
Jul 9 23:48:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create GroupAdministrationService
Jul 9 23:48:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create GroupDeviceDispatcher
Jul 9 23:48:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create GroupDeviceHandler
Jul 9 23:48:32 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO [Thread-1] @GroupDeviceHandler - initializing...
Jul 9 23:48:32 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO [Thread-1] --> created groupDeviceDispatcher (GroupDeviceService to BidCoS (via Dispatcher))
Jul 9 23:48:32 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO [Thread-1] --> created virtualDeviceHandler (GroupDeviceService to ReGa)
Jul 9 23:48:32 de.eq3.ccu.groupdevice.service.GroupDeviceHandler INFO [Thread-1] --> got groupDefinitionProvider
Jul 9 23:48:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create BidCosGroupMemberProvider
Jul 9 23:48:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Init groupAdministrationService
Jul 9 23:48:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Init Virtual OS Device
Jul 9 23:48:32 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Init ESHLight Bridge
Jul 9 23:48:33 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create RrdDatalogging
Jul 9 23:48:33 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create MeasurementService
Jul 9 23:48:33 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Init MeasurementService
Jul 9 23:48:33 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create HTTP Server
Jul 9 23:48:33 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create BidCos context and start handler
Jul 9 23:48:33 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Create group context and start handler
Jul 9 23:48:33 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-4] (un)registerCallback on LegacyServiceHandler called from url: http://127.0.0.1:9292/bidcos
Jul 9 23:48:33 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-4] init finished
Jul 9 23:48:33 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO [vert.x-worker-thread-0] Added InterfaceId: HmIP-RF_java
Jul 9 23:48:33 de.eq3.cbcs.legacy.bidcos.rpc.internal.DeviceUtil INFO [vert.x-worker-thread-0] updateDevicesForClient HmIP-RF_java -> 11 device addresses will be added
Jul 9 23:48:34 de.eq3.ccu.server.BaseHMServer INFO [Thread-1] Starting HMServer done
Jul 9 23:48:42 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-4] (un)registerCallback on VirtualDeviceHandlerRega called from url: xmlrpc_bin://127.0.0.1:1999
Jul 9 23:48:42 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-4] Added InterfaceId: 1008
Jul 9 23:48:42 de.eq3.ccu.virtualdevice.service.internal.rega.BackendWorker INFO [vert.x-worker-thread-11] Execute BackendCommand: de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand
Jul 9 23:48:52 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-1] (un)registerCallback on LegacyServiceHandler called from url: xmlrpc_bin://127.0.0.1:1999
Jul 9 23:48:52 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-1] init finished
Jul 9 23:48:52 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO [vert.x-worker-thread-2] Added InterfaceId: 1009
Hier noch ein Logauszug, wenn ich eine Schaltaktion per WebUI versuche ... was mir im Log aufgefallen ist:
Code: Alles auswählen
Jul 10 00:07:35 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #2 [httpServer.cpp:764]
Jul 10 00:07:35 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 10 00:07:35 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jul 10 00:07:36 homematic-ccu2 user.debug multimac: C> @1214078: #144 HMIP CMD=06 04
Jul 10 00:07:36 homematic-ccu2 user.debug multimac: A<: #250 HMIP CMD=06 04
Jul 10 00:07:36 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000858A994AFCE:4","STATE",true} result= [faultCode:-1,faultString:"Generic error (DUTY_CYCLE)"] [iseXmlRpc.cpp:2605]
Jul 10 00:07:36 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1502]
Jul 10 00:07:36 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000858A994AFCE:4 [iseDOMdpHSS.cpp:77]
Jul 10 00:07:36 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 10 00:07:36 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="000858A994AFCE:0"."UNREACH"=true [iseXmlRpc.cpp:321]
Jul 10 00:07:36 homematic-ccu2 local0.debug ReGaHss: Verbose: CHANNEL::SetLastDPActionTime: call on change; id = 1239 [iseDOMchn.h:288]
Jul 10 00:07:36 homematic-ccu2 local0.debug ReGaHss: Verbose: DEVICE::SetLastActionTime: call on change; id = 1238 [iseDOMdev.h:225]
Jul 10 00:07:36 homematic-ccu2 local0.debug ReGaHss: Verbose: XmlRpcMethodEvent::execute: UpdateValue succeeded; val = 1 [iseXmlRpc.cpp:364]
Jul 10 00:07:36 homematic-ccu2 local0.info ReGaHss: Info: IseAlarmDP::WriteValue -> Alarm is not receipted until now! [iseDOMdpAlarm.cpp:295]
Jul 10 00:07:36 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jul 10 00:07:37 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 10 00:07:37 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 10 00:07:37 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 10 00:07:37 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 10 00:07:37 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 10 00:07:37 homematic-ccu2 local0.info ReGaHss: Info: recvd 62 bytes by web server #1 [httpServer.cpp:764]
Jul 10 00:07:37 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 10 00:07:37 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 10 00:07:40 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 10 00:07:40 homematic-ccu2 local0.info ReGaHss: Info: recvd 821 bytes by web server #1 [httpServer.cpp:764]
Jul 10 00:07:40 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 10 00:07:40 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 10 00:07:40 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 10 00:07:40 homematic-ccu2 local0.info ReGaHss: Info: recvd 835 bytes by web server #1 [httpServer.cpp:764]
Jul 10 00:07:40 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@ [iseSession.cpp:185]
Jul 10 00:07:40 homematic-ccu2 local0.info ReGaHss: Info: IseXmlRpc::GetInterfaceByID: interface name= HmIP-RF for ID=1009 [iseXmlRpc.cpp:2549]
Jul 10 00:07:40 homematic-ccu2 user.debug multimac: A>: #251 HMIP CMD=03 00 10 00 8E 00 00 00 60 12 74 86 05 02 04 00
Jul 10 00:07:40 homematic-ccu2 user.debug multimac: MacController::OnDownstreamFrame(#251 HMIP CMD=03 00 10 00 8E 00 00 00 60 12 74 86 05 02 04 00)
Jul 10 00:07:40 homematic-ccu2 user.debug multimac: C<: #145 HMIP CMD=03 00 10 00 8E 00 00 00 60 12 74 86 05 02 04 00
Jul 10 00:07:40 homematic-ccu2 user.debug multimac: C< @1217750: bin:FD 00 12 02 91 03 00 10 00 8E 00 00 00 60 12 74 86 05 02 04 00 BA C2
Jul 10 00:07:40 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #1 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 10 00:07:40 homematic-ccu2 local0.info ReGaHss: Info: recvd 326 bytes by web server #2 [httpServer.cpp:764]
Jul 10 00:07:40 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /tclrega.exe [iseSession.cpp:185]
Jul 10 00:07:40 homematic-ccu2 local0.info ReGaHss: Info: http id #2 sends parsed file [httpServer.cpp:2022]
Jul 10 00:07:41 homematic-ccu2 user.debug multimac: C> @1218910: #145 HMIP CMD=06 04
Jul 10 00:07:41 homematic-ccu2 user.debug multimac: A<: #251 HMIP CMD=06 04
Jul 10 00:07:41 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =setValue Params = {"000858A994AFCE:4","STATE",false} result= [faultCode:-1,faultString:"Generic error (DUTY_CYCLE)"] [iseXmlRpc.cpp:2605]
Jul 10 00:07:41 homematic-ccu2 local0.err ReGaHss: Error: IseXmlRpc::CallSetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1502]
Jul 10 00:07:41 homematic-ccu2 local0.err ReGaHss: Error: IseHssDP::WriteValue: CallSetValue failed; address = 000858A994AFCE:4 [iseDOMdpHSS.cpp:77]
Jul 10 00:07:41 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 10 00:07:41 homematic-ccu2 local0.info ReGaHss: Info: XmlRpcMethodEvent::execute: Event="000858A994AFCE:0"."UNREACH"=true [iseXmlRpc.cpp:321]
Jul 10 00:07:41 homematic-ccu2 local0.debug ReGaHss: Verbose: CHANNEL::SetLastDPActionTime: call on change; id = 1239 [iseDOMchn.h:288]
Jul 10 00:07:41 homematic-ccu2 local0.debug ReGaHss: Verbose: DEVICE::SetLastActionTime: call on change; id = 1238 [iseDOMdev.h:225]
Jul 10 00:07:41 homematic-ccu2 local0.debug ReGaHss: Verbose: XmlRpcMethodEvent::execute: UpdateValue succeeded; val = 1 [iseXmlRpc.cpp:364]
Jul 10 00:07:41 homematic-ccu2 local0.info ReGaHss: Info: IseAlarmDP::WriteValue -> Alarm is not receipted until now! [iseDOMdpAlarm.cpp:295]
Jul 10 00:07:41 homematic-ccu2 local0.debug ReGaHss: Verbose: EventThread::ThreadFunction: wait max timeout = 240000 [iseRTEvent.cpp:69]
Jul 10 00:07:42 homematic-ccu2 local0.debug ReGaHss: Verbose: TimerThread::ThreadFunction: ISETIMEZONE = -3600 [iseRTTimer.cpp:81]
Jul 10 00:07:42 homematic-ccu2 local0.debug ReGaHss: Verbose: FillTimerEventList: DST offset = 0 [iseRTTimer.cpp:423]
Jul 10 00:07:42 homematic-ccu2 local0.debug ReGaHss: Verbose: IseRT::SetFinishedDPInitEvent: TimerInitDPsComplete event setting [iseRT.cpp:377]
Jul 10 00:07:42 homematic-ccu2 local0.info ReGaHss: Info: TimerThread::ThreadFunction() - no timer exists, so Wait (60 s) ! [iseRTTimer.cpp:209]
Jul 10 00:07:42 homematic-ccu2 user.debug multimac: C<: #146 TRX GetDutyCycle
Jul 10 00:07:42 homematic-ccu2 user.debug multimac: C< @1220145: bin:FD 00 03 01 92 03 74 14
Jul 10 00:07:42 homematic-ccu2 user.debug multimac: C> @1220249: #146 TRX Response Ack 03
Jul 10 00:07:42 homematic-ccu2 user.debug multimac: SubsystemBidcos::CheckDutyCycleEventThreshold( 1.0, 1.5 ) = 0
Jul 10 00:07:43 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Jul 10 00:07:43 homematic-ccu2 local0.info ReGaHss: Info: recvd 817 bytes by web server #1 [httpServer.cpp:764]
Jul 10 00:07:43 homematic-ccu2 local0.info ReGaHss: Info: IseSession GetSessionId from URL: /esp/system.htm?sid=@7vOMkgKOWH@&action=UpdateUI [iseSession.cpp:185]
Jul 10 00:07:43 homematic-ccu2 local0.info ReGaHss: Info: http id #1 sends parsed file [httpServer.cpp:2022]
Jul 10 00:07:44 homematic-ccu2 local0.info ReGaHss: Info: start web processing, worker thread #0 {"HTTP-Listener"} [httpListener.cpp:208]
Oder hat diese Meldung gar nichts zu sagen?
Hat jemand eine Idee, was da schief läuft?
Vielen Dank.
