ich habe heute ein update an meinem rpi4 über sudo get-apt update / upgrade gemacht und seitdem läuft piVCCU nicht mehr.
Ich habe jede Menge Meldungen:
Code: Alles auswählen
dummy_rx8130.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
dw_apb_raw_uart.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
eq3_char_loop.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
fake_hmrf.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
generic_raw_uart.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
hb_rf_eth.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
hb_rf_usb-2.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
hb_rf_usb.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
led_trigger_timer.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
meson_raw_uart.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
pl011_raw_uart.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
plat_eq3ccu2.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
rpi_rf_mod_led.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte 'kernel/drivers/pivccu' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
rtc-rx8130.ko:
- Uninstallation
- Deleting from: /lib/modules/5.10.11-v7l+/kernel/drivers/pivccu/
rmdir: konnte Verzeichnis 'kernel/drivers' nicht entfernen: Das Verzeichnis ist nicht leer
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
depmod....
Code: Alles auswählen
Package: pivccu-modules-raspberrypi
Status: install ok half-configured
Priority: extra
Section: kernel
Maintainer: Alexander Reinert <alex@areinert.de>
Architecture: all
Version: 2.0-14
Config-Version: 2.0-13
Depends: raspberrypi-kernel-headers | linux-headers-raspi, pivccu-modules-dkms, bc
Pre-Depends: debconf (>= 0.5) | debconf-2.0
Description: Raspberry Pi kernel modules needed for Homematic
This package contains the Raspberry Pi kernel needed for Homematic.
Homepage: https://github.com/alexreinert/piVCCU
Code: Alles auswählen
sudo apt-get upgrade
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Paketaktualisierung (Upgrade) wird berechnet... Fertig
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
1 nicht vollständig installiert oder entfernt.
Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren? [J/n] j
pivccu-modules-raspberrypi (2.0-14) wird eingerichtet ...
»Umleitung von /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo zu /usr/shar e/rpikernelhack/overlays/pivccu-raspberrypi.dtbo durch rpikernelhack« wird entfe rnt
dpkg-divert: Fehler: Fehler beim Überprüfen von »/var/lib/piVCCU/dtb/overlays/pi vccu-raspberrypi.dtbo«: Datei oder Verzeichnis nicht gefunden
dpkg: Fehler beim Bearbeiten des Paketes pivccu-modules-raspberrypi (--configure ):
»installiertes pivccu-modules-raspberrypi-Skript des Paketes post-installation« -Unterprozess gab den Fehlerwert 2 zurück
Fehler traten auf beim Bearbeiten von:
pivccu-modules-raspberrypi
E: Sub-process /usr/bin/dpkg returned an error code (1)