RPI-RF-MOD spricht HM, aber nicht HmIP

[trood]

Hi Alex,

das RPI-RF-MOD geht leider in die nächste Problemrunde. Ich dachte, ich wäre aus dem Gröbsten raus und könnte endlich meine Config von der CCU2 in die piVCCU3 einspielen, habe aber vorher noch ein paar lose Aktoren aus der Reservekiste getestet.

Was soll ich sagen? -> HM geht. HmIP geht nicht.

Specs:
- Asus TInkerboard S R2.0 mit Armbian 22.02.1 und Kernel eingefrohren auf 5.10.60-rockchip -> LED vom RPI-RF-MOD macht's wieder
- piVCCU 3.61.7

erfolgreich angelerntes Gerät für Homematic Funkprotokoll: HM-LC-Sw2-FM, mit einem RSSI von ~-33dBm

Daneben liegt ein HmIP-FROLL. Ich lerne mit Key und SGTIN an. Aktor taucht im Posteingang auf. Direkt nach Übernahme in die CCU3-Konfig habe ich zwei Statusmeldungen: "Konfigurationsdaten stehen zur Übertragung an" und "Gerätekommunikation gestört" und die gehen auch nicht mehr weg.

Da ist irgendwas in den pivccu-modules-dkms doch mehr kaputt als nur die LED-Ansteuerung, und diesmal gilt das selbst für 5.10.60-rockchip? Die Antenne fällt bei -33dBm (das Zeug liegt alles bei mir auf'm Schreibtisch in 1m Radius rum) als Problem wohl aus und das RPI-RF-MOD wird nicht "zur Hälfte" seine Logik vergessen haben. Und mit den Keyservern hängt das auch nicht zusammen, da keine dazu passende Meldung in den Logs steht.

Nach einem Neustart ist natürlich erst mal Ruhe, aber beim Bedienen oder setzen von Gerätewerten geht das wieder von vorne los. HmIP ist tot.

Ziemliche Sorge macht mir das hier aus der ReGaHss "Unknown Parameter value for value key". Das häuft sich bei Kommunikation mit dem Aktor. Vielleicht ist das kein Funkproblem, sondern was sehr spezielles nur beim HmIP, welches in Summe dann zu "unreach"-Effekten führt.

pivccu-attach cat /var/log/messages:

Code: Alles auswählen

Mar 26 19:47:41 piVCCU syslog.info syslogd started: BusyBox v1.29.2
Mar 26 19:47:41 piVCCU user.notice kernel: klogd started: BusyBox v1.29.2 (2021-12-06 15:47:34 CET)
Mar 26 19:47:44 piVCCU syslog.info syslogd exiting
Mar 26 19:47:44 homematic syslog.info syslogd started: BusyBox v1.29.2
Mar 26 19:47:44 homematic user.notice kernel: klogd started: BusyBox v1.29.2 (2021-12-06 15:47:34 CET)
Mar 26 19:48:05 homematic user.info firewall: configuration set
Mar 26 19:48:05 homematic daemon.info ifplugd(eth0)[301]: ifplugd 0.28 initializing.
Mar 26 19:48:05 homematic daemon.info ifplugd(eth0)[301]: Using interface eth0/DA:15:63:2B:96:B6 with driver <veth> (version: 1.0)
Mar 26 19:48:05 homematic daemon.info ifplugd(eth0)[301]: Using detection mode: SIOCETHTOOL
Mar 26 19:48:05 homematic daemon.info ifplugd(eth0)[301]: Initialization complete, link beat detected.
Mar 26 19:48:05 homematic daemon.warn ifplugd(eth0)[301]: Could not open /dev/tty, cannot beep.
Mar 26 19:48:05 homematic daemon.info ifplugd(eth0)[301]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Mar 26 19:48:05 homematic daemon.warn ifplugd(eth0)[301]: client: ifup: interface eth0 already configured
Mar 26 19:48:05 homematic daemon.info ifplugd(eth0)[301]: Program executed successfully.
Mar 26 19:48:11 homematic user.info kernel: [ 1861.314050] br0: topology change detected, propagating
Mar 26 19:48:21 homematic daemon.notice ntpdate[309]: step time server 131.234.220.232 offset 0.002141 sec
Mar 26 19:48:21 homematic daemon.notice ntpd[316]: ntpd 4.2.8p12@1.3728-o Mon Dec  6 15:45:40 CET 2021 (1): Starting
Mar 26 19:48:21 homematic daemon.info ntpd[316]: Command line: /usr/sbin/ntpd -g 0.de.pool.ntp.org 1.de.pool.ntp.org 2.de.pool.ntp.org 3.de.pool.ntp.org
Mar 26 19:48:21 homematic daemon.info ntpd[318]: proto: precision = 1.458 usec (-19)
Mar 26 19:48:21 homematic daemon.info ntpd[318]: Listen and drop on 0 v6wildcard [::]:123
Mar 26 19:48:21 homematic daemon.info ntpd[318]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Mar 26 19:48:21 homematic daemon.info ntpd[318]: Listen normally on 2 lo 127.0.0.1:123
Mar 26 19:48:21 homematic daemon.info ntpd[318]: Listen normally on 3 eth0 10.188.78.28:123
Mar 26 19:48:21 homematic daemon.info ntpd[318]: Listen normally on 4 lo [::1]:123
Mar 26 19:48:21 homematic daemon.info ntpd[318]: Listen normally on 5 eth0 [fe80::d815:63ff:fe2b:96b6%4]:123
Mar 26 19:48:21 homematic daemon.info ntpd[318]: Listening on routing socket on fd #22 for interface updates
Mar 26 19:48:21 homematic daemon.info ntpd[318]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
Mar 26 19:48:21 homematic daemon.info ntpd[318]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
Mar 26 19:48:21 homematic daemon.err xinetd[334]: Unable to read included directory: /etc/config/xinetd.d [file=/etc/xinetd.conf] [line=14]
Mar 26 19:48:21 homematic daemon.crit xinetd[334]: 334 {init_services} no services. Exiting...
Mar 26 19:48:21 homematic auth.info sshd[360]: Server listening on 0.0.0.0 port 22.
Mar 26 19:48:21 homematic auth.info sshd[360]: Server listening on :: port 22.
Mar 26 19:48:21 homematic user.info root: Updating RF Lan Gateway Coprocessor Firmware
Mar 26 19:48:21 homematic user.debug update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Mar 26 19:48:21 homematic user.info root: Updating RF Lan Gateway Firmware
Mar 26 19:48:21 homematic user.info update-lgw-firmware: No gateway found in config file /etc/config/rfd.conf
Mar 26 19:48:21 homematic user.info kernel: [ 1871.443910] eq3loop: created slave mmd_hmip
Mar 26 19:48:21 homematic user.info kernel: [ 1871.444409] eq3loop: created slave mmd_bidcos
Mar 26 19:48:23 homematic user.info kernel: [ 1873.537041] eq3loop: eq3loop_open_slave() mmd_bidcos
Mar 26 19:48:31 homematic user.info kernel: [ 1881.445095] eq3loop: eq3loop_close_slave() mmd_hmip
Mar 26 19:48:31 homematic user.info kernel: [ 1881.446791] eq3loop: eq3loop_close_slave() mmd_hmip
Mar 26 19:48:31 homematic user.info kernel: [ 1881.447305] eq3loop: eq3loop_close_slave() mmd_hmip
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:0","ACTUAL_TEMPERATURE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTUAL_TEMPERATURE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:0","ACTUAL_TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:0","ACTUAL_TEMPERATURE_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTUAL_TEMPERATURE_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:0","ACTUAL_TEMPERATURE_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:0","DUTY_CYCLE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: DUTY_CYCLE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:0","DUTY_CYCLE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:0","ERROR_CODE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ERROR_CODE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:0","ERROR_CODE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:0","ERROR_OVERHEAT"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ERROR_OVERHEAT"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:0","ERROR_OVERHEAT"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:0","OPERATING_VOLTAGE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: OPERATING_VOLTAGE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:0","OPERATING_VOLTAGE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:0","OPERATING_VOLTAGE_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: OPERATING_VOLTAGE_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:0","OPERATING_VOLTAGE_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:0","RSSI_DEVICE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: RSSI_DEVICE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:0","RSSI_DEVICE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:0","RSSI_PEER"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: RSSI_PEER"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:0","RSSI_PEER"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:0","UNREACH"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: UNREACH"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:0","UNREACH"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:3","ACTIVITY_STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTIVITY_STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:3","ACTIVITY_STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:3","LEVEL"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: LEVEL"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:3","LEVEL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:3","LEVEL_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: LEVEL_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:3","LEVEL_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:3","PROCESS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PROCESS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:3","PROCESS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:3","SECTION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:3","SECTION"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:3","SECTION_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:3","SECTION_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:4","ACTIVITY_STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTIVITY_STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:4","ACTIVITY_STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:4","LEVEL"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: LEVEL"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:4","LEVEL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:4","LEVEL_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: LEVEL_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:4","LEVEL_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:4","PROCESS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PROCESS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:4","PROCESS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:4","SECTION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:4","SECTION"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:4","SECTION_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:4","SECTION_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:5","ACTIVITY_STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTIVITY_STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:5","ACTIVITY_STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:5","LEVEL"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: LEVEL"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:5","LEVEL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:5","LEVEL_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: LEVEL_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:5","LEVEL_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:5","PROCESS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PROCESS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:5","PROCESS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:5","SECTION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:5","SECTION"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:5","SECTION_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:5","SECTION_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:6","ACTIVITY_STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: ACTIVITY_STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:6","ACTIVITY_STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:6","LEVEL"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: LEVEL"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:6","LEVEL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:6","LEVEL_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: LEVEL_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:6","LEVEL_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:6","PROCESS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: PROCESS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:6","PROCESS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:6","SECTION"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:6","SECTION"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:6","SECTION_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SECTION_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:6","SECTION_STATUS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Mar 26 19:48:47 homematic local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:7","WEEK_PROGRAM_CHANNEL_LOCKS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: WEEK_PROGRAM_CHANNEL_LOCKS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1009, params: {"00115A49996D89:7","WEEK_PROGRAM_CHANNEL_LOCKS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Mar 26 19:48:47 homematic local0.err ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]

und pivccu-attach cat /var/hm_mode

Code: Alles auswählen

HM_HMIP_ADDRESS='0xB39CB0'
HM_HMIP_ADDRESS_ACTIVE='0xB39CB0'
HM_HMIP_DEV='RPI-RF-MOD'
HM_HMIP_DEVNODE='/dev/raw-uart'
HM_HMIP_DEVTYPE='GPIO@ff190000.serial'
HM_HMIP_SERIAL='xxx'
HM_HMIP_SGTIN='xxx'
HM_HMIP_VERSION='4.4.12'
HM_HMRF_ADDRESS='0x769182'
HM_HMRF_ADDRESS_ACTIVE='0x769182'
HM_HMRF_DEV='RPI-RF-MOD'
HM_HMRF_DEVNODE='/dev/raw-uart'
HM_HMRF_DEVTYPE='GPIO@ff190000.serial'
HM_HMRF_SERIAL='xxx'
HM_HMRF_VERSION='4.4.12'
HM_HOST='rpi3'
HM_HOST_GPIO_RESET=''
HM_HOST_GPIO_UART='/dev/raw-uart'
HM_LED_GREEN=''
HM_LED_GREEN_MODE1='none'
HM_LED_GREEN_MODE2='none'
HM_LED_RED=''
HM_LED_RED_MODE1='none'
HM_LED_RED_MODE2='none'
HM_LED_YELLOW=''
HM_LED_YELLOW_MODE1='none'
HM_LED_YELLOW_MODE2='none'
HM_MODE='NORMAL'
HM_RTC=''

Ich komm' da nicht weiter.

Was kann ich an Logs sinnvoll beisteuern?

Dankeschön!

[trood]

Nachtrag: von ungefähr 100 Kommunikationsversuchen (Geräteeinstellungen und/oder -bedienung) gegen den HmIP-Aktor gelingt EINER. Mit Glück. Der HM-Aktor dagegen läuft mit 100% Erfolgsquote.

in den /var/log/messages bleibt

Code: Alles auswählen

Mar 27 20:47:46 homematic local0.warn ReGaHss: WARNING: XMLRPC 'setValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"00115A49996D89:4","STOP",true}, result: [faultCode:-1,faultString:"Generic error (TIMEOUT)"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 27 20:47:46 homematic local0.err ReGaHss: ERROR: XMLRPC 'setValue' call failed (interface: 1009, params: {"00115A49996D89:4","STOP",true}) [CallSetValue():iseXmlRpc.cpp:1505]
Mar 27 20:47:46 homematic local0.err ReGaHss: ERROR: rpc.CallSetValue failed; address = 00115A49996D89:4 [WriteValue():iseDOMdpHSS.cpp:76]

und im var/log/hmserver.log sind nur INFO nachrichten und keine Fehler. Logging eingestellt mit funk=warnungen und logikschicht=fehler

HILFE! ich hab' keinen Plan, was ich da tun kann. Keyserver und Registrierung des RPI-RF-MOD scheinen ja wohl auch zu passen, sonst hätte ich nicht "1-aus-100" Erfolge, wenn man das überhaupt so nennen darf...

[jp112sdl]

Evtl. Funkstörer in der Nähe.
HmIP macht Listen-Before-Talk. HM sendet immer.
Hier mal nach "Carrier Sense" suchen und diesen überprüfen.

[trood]

ok, interessanter Einwand.

1) wo kann ich denn den Carrier Sense ablesen?

2) wenn es damit ein Problem gäbe, würde mein Haus insgesamt nicht (mehr) funktionieren. Ich hab ja eine aktive CCU2 mit diversem angelernten HmIP-Zeugs, welche ich auf die Tinkerboard piVCCU mal portieren will, wenn die neue Hardware ernsthaft laufen würde.

Insofern glaube ich da eher nicht an Überlappungen. Weder inhouse, noch mit den Nachbarn.

[trood]

ah, noch was:
- verhalten sich CCU2 und CCU3 bzgl. der "Aggressivität" von Carrier Sense unterschiedlich? Ich hab bislang nur Felderfahrung mit der CCU2. Die Tinker-piVCCU ist dann meine erste CCU3.
- wie lange nach dem Booten wäre die Carrier Sense "stärker spürbar" oder ist das kein Unterschied zwischen Boot und späterer Runtime?

Ich hab so ein bisschen den Eindruck, dass das Phänomen zeitlich begrenzt auf die Kaltstartphase ist oder ich hab im Moment (in den letzten 10 Minuten) 'n Lauf.

[Roland M.]

Hallo!

- verhalten sich CCU2 und CCU3 bzgl. der "Aggressivität" von Carrier Sense unterschiedlich?

Ja.
Prinzipiell wurde mit HmIP (jetzt als Protokoll gesehen) das "listen before talk" eingeführt. Also auch auf der CCU2.
Genau das verhindert aber auch bei ungewollten Störpegel, wie etwa klassisch beim Raspberry Pi 4, dass ein Funkpaket überhaupt gesendet wird.
Das klassische HM ist dagegen schmerzfrei und brüllt einfach in die weite Welt. Ob der Adressat die Botschaft hört, interessiert den Sender eigentlich nicht, abgesehen von Kommunikationsstörungen, wenn doch keine Antwort kommt.


Roland

[MichaelN]

Siehe viewtopic.php?f=31&t=64657

[trood]

Hi Roland,

nee, anders: ich habe an der CCU2 gut 1/3 der Geräte schon als HmIP und 2/3 in "classic" (zumal es ja auch ein paar "geile Teile" auch nur in classic gibt) und ich habe in der CCU2-Welt überhaupt keine Berührungspunkte zu CarrierSense im HmIP in Form irgendwelcher Gerätekommunikationsdefizite. Mein Haus (~100 funkende Devices zzgl. Wired) "funzt" i.W. einfach.

Jetzt stell ich ich 'ne flammneue CCU3/piVCCU3 auf den Tisch und das Teil zickt rum, als wäre ich auf einem Volksfest der 868-Sender - wenn die CarrierSense-Theorie stimmt... das versteh' ich noch nicht. Und kaum, dass ich es schreibe: schon wieder Kommunikationsfehler in der neuen CCU, während in der bestehenden CCU alle HmIP ganz normal funktionieren. Ich denke nicht, dass die beiden sich gegenseitig im Weg stehen. Und auch kein anderer im Umfeld, sonst würde die alte CCU ja auch rumzicken.

Wo kann ich denn in der Original CCU3 Firmware (piVCCU is' ja fast genau das) den CarrierSense-Effekt ablesen aus Logfiles oder UI?

[trood]

@Michael: danke, das guck ich mir an und komm' dann mit neuer "Statistik" zurück.

[trood]

CS=14%

Funk bricht trotzdem zusammen. Das ist was anderes.

@Alex: ich denke echt, dass da was in den Hardware-Anpassungen für neuere Armbians problematisch ist. Meinung?