neue Raspberry mit bestehende RPI-RF-MOD Problem

[jvs]

musste leider meiner Raspberry und sd card auswechseln wegen Wasser (ohne weiteres Kommentar...) irgendwie kriege ich es nicht hin habe neue Raspberry gekauft+bestehende RPI-RF-MOD

piVCCU version: 3.65.6-73
Kernel modules: Available
Raw UART dev: Available
Rasp.Pi UART: Assigned to GPIO pins
HMRF Hardware: RPI-RF-MOD
Connected via: GPIO@3f201000.serial (/dev/raw-uart)
Board serial: XXXX
Radio MAC: XXXX
HMIP Hardware: RPI-RF-MOD
Connected via: GPIO@3f201000.serial (/dev/raw-uart)
SGTIN: XXXX
Radio MAC: XXXX

SD Card neue eingerichtet Backup CCU eingespielt und Homematic aktualisiert.... muss ich nun warten auf Keys oder sollte es eigentlich gleich wieder funktionieren?
Ich habe mehr als 12 Stunden gewartet und kommt nichts... im log filtere auf eq3 siehe folgenden :

Jul 25 07:52:05 ccu3-webui daemon.warn ifplugd(eth0)[300]: Could not open /dev/tty, cannot beep.
Jul 25 07:52:05 ccu3-webui daemon.warn ifplugd(eth0)[300]: client: ifup: interface eth0 already configured
Jul 25 07:57:31 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"HEQ0175593:1","STATE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:34 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"HEQ0175593:1","WORKING"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA3D4"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA3D4"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA3D4"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA357"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA357"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA357"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA58F"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA58F"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA58F"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001158A99139FF"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001158A99139FF"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001158A99139FF"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001158A99137B2"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001158A99137B2"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001158A99137B2"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001158A9913948"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001158A9913948"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001158A9913948"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000357098E5EBB"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000357098E5EBB"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000357098E5EBB"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000B57099F5398"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000B57099F5398"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000B57099F5398"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA319"}, result: [faultCode:-321,faultString:""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA319"}, result: [faultCode:-321,faultString:""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA319"}, result: [faultCode:-321,faultString:""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000B57099F51BC"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000B57099F51BC"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000B57099F51BC"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000B57099F558F"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000B57099F558F"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000B57099F558F"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA45F"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA45F"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000E17098FA45F"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001158A991382D"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001158A991382D"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Jul 25 07:57:43 ccu3-webui local0.warn ReGaHss: WARNING: XMLRPC 'getDeviceDescription': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"001158A991382D"}, result: [faultCode:-2,faultString:"Invalid device"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
2022-07-25 07:52:27,883 de.eq3.vertx.manager.management.VertxManager WARN [vert.x-eventloop-thread-7] SYSTEM: Exception during deployment of LegacyNotificationHandler - startup will continue
2022-07-25 07:52:27,884 de.eq3.vertx.manager.management.VertxManager WARN [vert.x-eventloop-thread-7]
2022-07-25 07:52:52,231 io.vertx.core.impl.BlockedThreadChecker WARN [vertx-blocked-thread-checker] Thread Thread[vert.x-eventloop-thread-0,5,main] has been blocked for 2356 ms, time limit is 2000 ms
2022-07-25 07:52:53,225 io.vertx.core.impl.BlockedThreadChecker WARN [vertx-blocked-thread-checker] Thread Thread[vert.x-eventloop-thread-0,5,main] has been blocked for 3356 ms, time limit is 2000 ms
2022-07-25 07:52:54,226 io.vertx.core.impl.BlockedThreadChecker WARN [vertx-blocked-thread-checker] Thread Thread[vert.x-eventloop-thread-0,5,main] has been blocked for 4357 ms, time limit is 2000 ms
2022-07-25 07:52:55,228 io.vertx.core.impl.BlockedThreadChecker WARN [vertx-blocked-thread-checker] Thread Thread[vert.x-eventloop-thread-0,5,main] has been blocked for 5357 ms, time limit is 2000 ms
2022-07-25 07:52:56,228 io.vertx.core.impl.BlockedThreadChecker WARN [vertx-blocked-thread-checker] Thread Thread[vert.x-eventloop-thread-0,5,main] has been blocked for 6357 ms, time limit is 2000 ms
2022-07-25 07:52:57,227 io.vertx.core.impl.BlockedThreadChecker WARN [vertx-blocked-thread-checker] Thread Thread[vert.x-eventloop-thread-0,5,main] has been blocked for 7357 ms, time limit is 2000 ms
2022-07-25 07:52:58,227 io.vertx.core.impl.BlockedThreadChecker WARN [vertx-blocked-thread-checker] Thread Thread[vert.x-eventloop-thread-0,5,main] has been blocked for 8357 ms, time limit is 2000 ms
2022-07-25 07:52:59,228 io.vertx.core.impl.BlockedThreadChecker WARN [vertx-blocked-thread-checker] Thread Thread[vert.x-eventloop-thread-0,5,main] has been blocked for 9358 ms, time limit is 2000 ms
2022-07-25 07:54:37,238 de.eq3.cbcs.server.core.framehandling.HMIPApplicationHandler WARN [vert.x-eventloop-thread-5] AP 3014F711A0001F5A4993F8E7: Frame HMIP_APP_STATUS received from Device with unknown address 780490
2022-07-25 07:54:44,951 de.eq3.cbcs.server.core.framehandling.HMIPApplicationHandler WARN [vert.x-eventloop-thread-5] AP 3014F711A0001F5A4993F8E7: Frame HMIP_APP_STATUS received from Device with unknown address 98BE99
2022-07-25 07:54:45,022 de.eq3.cbcs.server.core.framehandling.HMIPApplicationHandler WARN [vert.x-eventloop-thread-5] AP 3014F711A0001F5A4993F8E7: Frame HMIP_APP_STATUS received from Device with unknown address 98BE99
2022-07-25 07:57:50,213 de.eq3.cbcs.server.core.framehandling.HMIPApplicationHandler WARN [vert.x-eventloop-thread-5] AP 3014F711A0001F5A4993F8E7: Frame HMIP_APP_STATUS received from Device with unknown address 23E4C3

wem kann mir hier aushelfen(?) habe auch contact Formular von EQ3 abgesendet bis jetzt kein Antwort weiss ansonsten jemanden wie ich EQ3 erreichen kann (?)

Besten Dank

[deimos]

Hi,

du beschreibst leider nicht dein akutes Problem. Ich rate einfach mal ins Blaue: Du hast neu einen Pi 4 und kannst jetzt keine HmIP Geräte steuern?

Viele Grüße
Alex

[jvs]

gut geraten

Du hast neu einen neue Pi 4 und kannst jetzt keine HmIP Geräte steuern?

... akutes Problem... ich kann meine HmIP Komponenten nach einspielen meiner Backup nicht bedienen

[MichaelN]

CarrierSense?

[Matsch]

Du liest hier eher selten mit? Das Thema Funkstörung durch Pi 4 ist sattsam bekannt.

[jvs]

diesem Wert sehe ich nicht bei mir (?)

[jvs]

es hat bis wechseln der Raspi 3 funktioniert somit erwarte eher ein Key Problem (?)

[MichaelN]

Du bist seit 10 Jahren dabei und hast die Suchfunktion noch nciht entdeckt? Google ginge auch...

[jvs]

oder ich habe mich bis jetzt gut bedienen können mit Suche .... ich finde es einfach nicht deswegen frage ich hier nach...

[Matsch]

es hat bis wechseln der Raspi 3 funktioniert

Das glaube ich gerne und es würde auch heute noch funktionieren, wenn du nur den Pi3 gewechselt hättest. Es musste aber was vermeindlich besseres sein.