sed: can't read /var/lib/piVCCU/dtb/config.txt: No such file or directory

Virtualisierte CCU für Raspberry Pi und Clones

Moderator: Co-Administratoren

Antworten
arichter
Beiträge: 10
Registriert: 28.10.2017, 13:39

sed: can't read /var/lib/piVCCU/dtb/config.txt: No such file or directory

Beitrag von arichter » 09.11.2022, 11:53

Bei einem upgrade gab es ein Problem, jetzt läuft die aktuelle Version, aber pivccu-modules-raspberrypi ist not fully installed or removed. wegen sed: can't read /var/lib/piVCCU/dtb/config.txt: No such file or directory

Weiß jemand einen quickfix?

Code: Alles auswählen

 pi@raspberrypi:~ $ sudo apt update && sudo apt upgrade
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Get:2 http://archive.raspberrypi.org/debian buster InRelease [32.6 kB]                                                 
Hit:3 https://deb.nodesource.com/node_10.x buster InRelease                                                            
Hit:4 https://www.pivccu.de/piVCCU stable InRelease                                                     
Get:5 http://archive.raspberrypi.org/debian buster/main armhf Packages [392 kB]
Fetched 424 kB in 1s (314 kB/s)  
Reading package lists... Done
Building dependency tree       
Reading state information... Done
All packages are up to date.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] Y
Setting up pivccu-modules-raspberrypi (2.0-17) ...
sed: can't read /var/lib/piVCCU/dtb/config.txt: No such file or directory
dpkg: error processing package pivccu-modules-raspberrypi (--configure):
 installed pivccu-modules-raspberrypi package post-installation script subprocess returned error exit status 2
Errors were encountered while processing:
 pivccu-modules-raspberrypi
E: Sub-process /usr/bin/dpkg returned an error code (1)

Code: Alles auswählen

pi@raspberrypi:~ $ sudo pivccu-info
piVCCU version: 3.65.8-74
Kernel modules: Available
Raw UART dev:   Available
Rasp.Pi UART:   Assigned to GPIO pins
HMRF Hardware:  RPI-RF-MOD
 Connected via: HB-RF-USB@usb-0000:01:00.0-1.3 (/dev/raw-uart)
 Board serial:  58A9A7073D
 Radio MAC:     0xFF073D
HMIP Hardware:  RPI-RF-MOD
 Connected via: HB-RF-USB@usb-0000:01:00.0-1.3 (/dev/raw-uart)
 SGTIN:         3014F711A0001F58A9A7073D
 Radio MAC:     0xB118DE
State:          RUNNING
PID:            912
IP:             192.168.178.103
CPU use:        167.94 seconds
BlkIO use:      84.71 MiB
Link:           vethpivccu
 TX bytes:      8.56 MiB
 RX bytes:      10.45 MiB
 Total bytes:   19.01 MiB

Antworten

Zurück zu „piVCCU“