Erfahrungen zu: Kombination von HmIPW-WTH und HmIP-FALMOT-C12

Kabelgebundene Sender und Empfänger aus der Serie Homematic IP wired

Moderator: Co-Administratoren

Zebbelin
Beiträge: 22
Registriert: 30.04.2019, 21:45
Hat sich bedankt: 1 Mal

Re: Erfahrungen zu: Kombination von HmIPW-WTH und HmIP-FALMOT-C12

Beitrag von Zebbelin » 26.11.2020, 20:13

Ein hoch auf dieses Forum! Ich dachte schon ich werde verrückt....
Habe beide Probleme auch: FALMOT friert ein und DRAP reagiert nicht mehr richtig. :cry:
Hoffentlich kommt das Update bald. Dauert ja dann auch wieder eine Weile bis es auf die Geräte verteilt ist...

mistertuete
Beiträge: 19
Registriert: 27.10.2020, 15:08
System: CCU
Danksagung erhalten: 2 Mal

Re: Erfahrungen zu: Kombination von HmIPW-WTH und HmIP-FALMOT-C12

Beitrag von mistertuete » 27.11.2020, 06:17

Eine Frage an alle Leidenden: Habt ihr auch HMIP-PSM Schaltsteckdosen im Einsatz? Für die kam am Montag ein Update, darauf nochmal ein Verbindungsabbruch DRAP-CCU ---- und seit einem Neustart am Dienstag spurt die FALMOT :roll:

Mal sehen, ob das so bleibt. Irgendwie traue ich dem Frieden noch nicht, aber im Moment ist alles stabil. Ob das eigentliche Problem wohl die Routing Funktion der PSM-Dosen war?!? :|

Pseudoreal
Beiträge: 244
Registriert: 01.05.2020, 19:48
System: CCU
Hat sich bedankt: 78 Mal
Danksagung erhalten: 10 Mal

Re: Erfahrungen zu: Kombination von HmIPW-WTH und HmIP-FALMOT-C12

Beitrag von Pseudoreal » 27.11.2020, 18:52

Wie weit sind die PSM Dosen entfernt? Ich habe nur die HmIP-PS im Einsatz. Für die gab es noch kein Update. Ob mit oder Routing in den HmIP-PS macht bzgl. des Einfrierens keinen Unterschied.
1x HmIPW-DRAP, 3x HmIPW-DRI32, 3x HmIPW-DRBL4, 7x HmIPW-DRS8, 1x HmIPW-DRD3, 1x HmIPW-SMI55, 3x HmIPW-WTH, 1x HmIP-HAP, 3x HmIP-STH, 1x HmIP-WTH-2, 3x HmIP-PS, 1x HmIP-SMI, 7x HmIP-SWDO-I, 4x HmIP-SWSD, 3 HmIP-SRH, 2x HmIP-BSL, 3x HmIP-SMI55, 1x HmIP-ASIR, 1xHmIP-ASIR-O

mistertuete
Beiträge: 19
Registriert: 27.10.2020, 15:08
System: CCU
Danksagung erhalten: 2 Mal

Re: Erfahrungen zu: Kombination von HmIPW-WTH und HmIP-FALMOT-C12

Beitrag von mistertuete » 28.11.2020, 07:46

Zu früh gefreut - bei mir gehts auch wieder los :roll:
Hat aber zumindest mal 4 Tage gehalten...

Sonnenflitzer
Beiträge: 45
Registriert: 28.08.2016, 16:55
System: Alternative CCU (auf Basis OCCU)
Wohnort: Aschaffenburg
Hat sich bedankt: 2 Mal
Danksagung erhalten: 1 Mal

Re: Erfahrungen zu: Kombination von HmIPW-WTH und HmIP-FALMOT-C12

Beitrag von Sonnenflitzer » 11.12.2020, 13:26

Inzwischen habe ich doch noch so einiges ausprobiert, es hat nichts geholfen. Einziger Lichtblick bisher: Nach Abschalten der Routing-Funktion bei allen drei eingesetzten HmIP-PSM sind die FALMOT nicht mehr ausgefallen. Offensichtlich konnte auch das vorher eingespielte Update auf den PSM nichts ändern, erst nach Abschalten der Routing-Funtion war Ruhe. Ich hoffe, das bleibt so, sind immerhin schon 3 Tage ohne Ausfall.
Was bleibt, ist der hohe Duty-Cycle von ca. 30%, wenn die FALMOTs mindestens eine Direktverknüpfung haben. Es bleibt also spannend, ob durch den versprochenen Dezember-Hotfix diese Probleme gelöst werden.

calvin80
Beiträge: 4
Registriert: 01.11.2020, 14:27
System: CCU

Re: Erfahrungen zu: Kombination von HmIPW-WTH und HmIP-FALMOT-C12

Beitrag von calvin80 » 13.12.2020, 15:33

Ich hoffe mal sehr, dass das Dezember-Update etwas bewirkt, sonst baue ich das ganze System wieder zurück. Keine vier Stunden ohne Freeze, das ist einfach nicht akzeptabel. Die Hoffnung stirbt zuletzt, eine Chance haben sie noch..

Pseudoreal
Beiträge: 244
Registriert: 01.05.2020, 19:48
System: CCU
Hat sich bedankt: 78 Mal
Danksagung erhalten: 10 Mal

Re: Erfahrungen zu: Kombination von HmIPW-WTH und HmIP-FALMOT-C12

Beitrag von Pseudoreal » 13.12.2020, 21:39

Seit dem neuesten Ccu Update habe ich interessanterweise keine Probleme mehr.
1x HmIPW-DRAP, 3x HmIPW-DRI32, 3x HmIPW-DRBL4, 7x HmIPW-DRS8, 1x HmIPW-DRD3, 1x HmIPW-SMI55, 3x HmIPW-WTH, 1x HmIP-HAP, 3x HmIP-STH, 1x HmIP-WTH-2, 3x HmIP-PS, 1x HmIP-SMI, 7x HmIP-SWDO-I, 4x HmIP-SWSD, 3 HmIP-SRH, 2x HmIP-BSL, 3x HmIP-SMI55, 1x HmIP-ASIR, 1xHmIP-ASIR-O

Zebbelin
Beiträge: 22
Registriert: 30.04.2019, 21:45
Hat sich bedankt: 1 Mal

Re: Erfahrungen zu: Kombination von HmIPW-WTH und HmIP-FALMOT-C12

Beitrag von Zebbelin » 12.01.2021, 09:45

Bei mir tritt das Problem immer noch auf. Hat sonst niemand mehr diese Probleme? Gab es irgend ein Firmware Update welches ich nicht mitbekommen habe?

Pseudoreal
Beiträge: 244
Registriert: 01.05.2020, 19:48
System: CCU
Hat sich bedankt: 78 Mal
Danksagung erhalten: 10 Mal

Re: Erfahrungen zu: Kombination von HmIPW-WTH und HmIP-FALMOT-C12

Beitrag von Pseudoreal » 12.01.2021, 14:58

Also ich hatte seit dem Update der CCU kein Freeze mehr. Ich habe allerdings auch das Routing der HmIP-PS aus, dafür aber einen HmIP-HAP in der Mitte des Gebäudes.
1x HmIPW-DRAP, 3x HmIPW-DRI32, 3x HmIPW-DRBL4, 7x HmIPW-DRS8, 1x HmIPW-DRD3, 1x HmIPW-SMI55, 3x HmIPW-WTH, 1x HmIP-HAP, 3x HmIP-STH, 1x HmIP-WTH-2, 3x HmIP-PS, 1x HmIP-SMI, 7x HmIP-SWDO-I, 4x HmIP-SWSD, 3 HmIP-SRH, 2x HmIP-BSL, 3x HmIP-SMI55, 1x HmIP-ASIR, 1xHmIP-ASIR-O

mistertuete
Beiträge: 19
Registriert: 27.10.2020, 15:08
System: CCU
Danksagung erhalten: 2 Mal

Re: Erfahrungen zu: Kombination von HmIPW-WTH und HmIP-FALMOT-C12

Beitrag von mistertuete » 20.01.2021, 11:45

Habe eben die 1.4.2 für die FALMOT per email von EQ-3 erhalten.
Heute Abend mal einspielen und testen...


Version 1.4.002 - 2020-11-30
--------------------------------------------------------------
** Bugfix
* The channel 12 cannot be controlled above 17°C in pairing mode.
After pairing, the device transmits the information to the wall thermostat whether
External Clock is active or inactive. In this case, it is erroneously transmitted
actively, so that the setting of the target temperature on the wall thermostat is
limited.
* In cooling mode, the valves are closed at temperatures above 30 °C.
* DEC Identify: Time for display and system key illumination was wrong.
The lighting duration of the backlight and the system button by sending the DEC
"Identify" does not correspond to the specification.
* The device sends invalid status frame.
If additional configuration is transmitted during the status transmission, wrong
values could be transmitted in the status.
* The time information telegram does not contain a note about the summer / winter
time change.
So it was possible that a time request to the access point in the period where the
changeover from summer to winter time takes place could lead to a double
changeover.
* Device crash in connection with a router.
If commands from the AP could not be sent directly to the device and reached the
device through a router, a device crash could occur.
* Failure if WTH link partner is additionally linked to an eTRV and Optimum-Start-
Stop is active at the WTH.
The device did not distinguish between the HeatingControlMode frames sent to the
eTRV or directly to the FALMOT. As long as Optimum-Start-Stop was not activated,
this was not a problem, because the same info (set and actual temperature) was
transmitted in both frames. However, if Optimum-Start-Stop is active, the
telegrams are temporarily different and this led to a valve opening and closing on
the device.

Antworten

Zurück zu „HomeMatic IP wired Aktoren und Sensoren“