HM-WDS30-OT2-NTC - Liefert falsche werte

Entwicklung und Bau von Hardware aller Art, die im HM-Umfeld eingesetzt werden kann

Moderator: Co-Administratoren

fanavity
Beiträge: 100
Registriert: 18.07.2017, 16:42

Re: HM-WDS30-OT2-NTC - Liefert falsche werte

Beitrag von fanavity » 08.10.2018, 09:51

Wenn ich das nun mache, könntet Ihr damit etwas anfangen? Für mich sind das nur kryptische Meldungen, welche ich nicht entziffern/lesen kann.

fanavity
Beiträge: 100
Registriert: 18.07.2017, 16:42

Re: HM-WDS30-OT2-NTC - Liefert falsche werte

Beitrag von fanavity » 08.10.2018, 19:30

Ich habe nun folgenden Sketch geflasht: HM-LC-Sw2-FM

Das ist der Funkverkehr nach einer Stunde:

Code: Alles auswählen

AskSin++ V3.1.1 (Oct  8 2018 18:29:22)
Address Space: 32 - 162
CC init1
CC Version: 14
 - ready
Bat: 47
ignore 0F B0 86 10 5FA9DA 000000 0A A8 BA 0C 64 00  - 1133
ignore 0F B2 86 10 5FA9DA 000000 0A A8 B9 0C 64 00  - 1557
ignore 0F B3 86 10 5FA9DA 000000 0A A8 B9 0C 64 00  - 2167
ignore 0C C2 84 70 515AC7 000000 00 C0 35  - 2186
ignore 0F CE 86 10 5FA9E7 000000 0A A8 B1 09 64 00  - 2924
Der "doofe" WDS30 war dabei aus. Kann es sein, dass er durch seine Statusmeldungen die anderen Aktoren zum "reden" bringt?

deimos
Beiträge: 2688
Registriert: 20.06.2017, 10:38
Wohnort: Leimersheim
Kontaktdaten:

Re: HM-WDS30-OT2-NTC - Liefert falsche werte

Beitrag von deimos » 08.10.2018, 19:42

Hi,

ich würde eher darauf tippen, dass du den CC1101 gegrillt hast: Man erkennt gut, dass du den Arduino mit 5V (genauer 4.7V) betreibst, der CC1101 verträgt aber max. 3.9V.
Nach 3 Sekunden wurde nichts mehr empfangen, bei einer Stunde müsste das mehr sein.

Viele Grüße
Alex

fanavity
Beiträge: 100
Registriert: 18.07.2017, 16:42

Re: HM-WDS30-OT2-NTC - Liefert falsche werte

Beitrag von fanavity » 08.10.2018, 19:47

Das ist ein 16Mhz Nano. Das CC1101 Modul ist an der 3,3V pinout angeschlossen. Sollte eigentlich funktionieren oder nicht?

deimos
Beiträge: 2688
Registriert: 20.06.2017, 10:38
Wohnort: Leimersheim
Kontaktdaten:

Re: HM-WDS30-OT2-NTC - Liefert falsche werte

Beitrag von deimos » 08.10.2018, 19:57

Hi,

die Signale zum CC1101 dürfen max. 0.3V über VCC liegen, wenn du keine entsprechenden Vorkehrungen für eine Pegelanpassung getroffen hast, dann sind die Eingänge vom CC1101 ziemlich sicher gegrillt. Nicht ohne Grund soll man ja die Arduinos mit 8Mhz und 3.3V nehmen.

Viele Grüße
Alex

fanavity
Beiträge: 100
Registriert: 18.07.2017, 16:42

Re: HM-WDS30-OT2-NTC - Liefert falsche werte

Beitrag von fanavity » 08.10.2018, 19:59

Beim 16Mhz -> 3,3V Ausgang liegen 3,6V an. Gerade gemessen. Dann schnappe ich mir einen neuen 5mhz pro mini und teste nochmal ;)

fanavity
Beiträge: 100
Registriert: 18.07.2017, 16:42

Re: HM-WDS30-OT2-NTC - Liefert falsche werte

Beitrag von fanavity » 08.10.2018, 20:45

Ganz offensichtlich hattest du recht - hatte den 16mhz immer als Cul verwendet. Mit dem identischen Aufbau und hatte nie Probleme. Naja gut.

Hier nun die Werte von 20:22 - 21:01
Da ist eine ganze Menge zusammengekommen:

Code: Alles auswählen

AskSin++ V3.1.1 (Oct  8 2018 20:20:39)
20:22:49.884 -> Address Space: 32 - 476
20:22:49.884 -> CC init1
20:22:49.884 -> CC Version: 14
20:22:49.884 ->  - ready
<- 0E 01 A2 10 120900 4F6DA4 06 01 00 00 00  - 1505
-> 0A 01 80 02 4F6DA4 120900 00  - 1763
20:22:50.753 -> waitAck: 01
<- 0E 02 A2 10 120900 4F6DA4 06 02 00 00 49  - 1808
-> 0A 02 80 02 4F6DA4 120900 00  - 2066
20:22:50.893 -> waitAck: 01
ignore 0C E8 86 5A 515AC7 000000 B0 D7 35  - 2596
ignore 0E E8 84 10 515AC7 000000 0B B0 D7 10 00  - 2670
ignore 0C E8 84 70 515AC7 000000 00 D7 35  - 2746
ignore 0F F4 86 10 5FA9E7 000000 0A A8 B2 09 64 00  - 2830
ignore 0D 77 A2 41 003005 4F6DA4 01 6E C8 00  - 2850
ignore 11 77 A0 02 4F6DA4 003005 04 6E 82 FA E5 0A 25 02  - 2861
ignore 19 77 A0 03 003005 4F6DA4 C3 C1 6E 98 5D 9D 9F 07 D7 98 96 A5 37 9E A5 EC  - 2877
ignore 0E 77 80 02 4F6DA4 003005 00 00 61 A0 08  - 2889
ignore 0D 78 A2 41 003005 4F6DA4 01 6F 00 00  - 3436
ignore 11 78 A0 02 4F6DA4 003005 04 82 DD 29 38 C6 8A 02  - 3448
ignore 19 78 A0 03 003005 4F6DA4 F4 3E 90 21 F0 43 D2 59 03 46 E4 90 55 5A 14 99  - 3463
ignore 0E 78 80 02 4F6DA4 003005 00 F4 DB 3E E2  - 3475
ignore 0F DB 86 10 5FA9DA 000000 0A A8 BB 0C 64 00  - 3604
ignore 0C E9 86 5A 515AC7 000000 B0 D7 35  - 3930
ignore 0F F5 86 10 5FA9E7 000000 0A A8 B2 09 64 00  - 4036
ignore 0C E9 84 70 515AC7 000000 00 D7 35  - 4079
ignore 0F EB 86 10 51A531 000000 0A B0 D7 0C 64 00  - 4110
ignore 0F DC 86 10 5FA9DA 000000 0A A8 BC 0C 64 00  - 4589
ignore 0F 14 86 10 51AEFA 000000 0A B0 D7 0C 64 00  - 4605
ignore 0F EC 86 10 51A531 000000 0A B0 D7 0C 64 00  - 5044
ignore 0F F6 86 10 5FA9E7 000000 0A A8 B2 09 64 00  - 5085
ignore 0C EA 86 5A 515AC7 000000 B0 D8 35  - 5109
ignore 0E EA 84 10 515AC7 000000 0B B0 D8 10 00  - 5183
ignore 0C EA 84 70 515AC7 000000 00 D8 35  - 5257
ignore 0F DD 86 10 5FA9DA 000000 0A A8 BC 0C 64 00  - 5502
ignore 0F 15 86 10 51AEFA 000000 0A B0 D8 0C 64 00  - 5521
ignore 0F 2D 94 3F 4F6DA4 000000 02 04 23 4E 5E AE  - 5658
ignore 0F ED 86 10 51A531 000000 0A B0 D8 0C 64 00  - 5935
ignore 0F F7 86 10 5FA9E7 000000 0A A8 B1 09 64 00  - 6057
ignore 0C EB 86 5A 515AC7 000000 B0 D8 34  - 6193
ignore 0C EB 84 70 515AC7 000000 00 D8 35  - 6332
ignore 0F DE 86 10 5FA9DA 000000 0A A8 BC 0C 64 00  - 6735
ignore 0F 16 86 10 51AEFA 000000 0A B0 D8 0C 64 00  - 6758
ignore 0F F8 86 10 5FA9E7 000000 0A A8 B1 09 64 00  - 6909
ignore 0F EE 86 10 51A531 000000 0A B0 D8 0C 64 00  - 7133
ignore 0C EC 86 5A 515AC7 000000 B0 D9 35  - 7161
ignore 0E EC 84 10 515AC7 000000 0B B0 D9 10 00  - 7237
ignore 0C EC 84 70 515AC7 000000 00 D9 35  - 7311
ignore 0F DF 86 10 5FA9DA 000000 0A A8 BC 0C 64 00  - 7878
ignore 0F 17 86 10 51AEFA 000000 0A B0 D9 0C 64 00  - 7901
ignore 0C ED 86 5A 515AC7 000000 B0 D9 35  - 8028
ignore 0F F9 86 10 5FA9E7 000000 0A A8 B1 09 64 00  - 8110
ignore 0C ED 84 70 515AC7 000000 00 D9 35  - 8177
ignore 0F EF 86 10 51A531 000000 0A B0 D9 0C 64 00  - 8257
ignore 0F E0 86 10 5FA9DA 000000 0A A8 BC 0C 64 00  - 8914
ignore 0F 18 86 10 51AEFA 000000 0A B0 D9 0C 64 00  - 8939
ignore 0F FA 86 10 5FA9E7 000000 0A A8 B1 09 64 00  - 9187
ignore 0C EE 86 5A 515AC7 000000 B0 DA 35  - 9236
ignore 0F F0 86 10 51A531 000000 0A B0 DA 0C 64 00  - 9250
ignore 0E EE 84 10 515AC7 000000 0B B0 DA 10 00  - 9320
ignore 0C EE 84 70 515AC7 000000 00 DA 35  - 9396
ignore 0F E1 86 10 5FA9DA 000000 0A A8 BC 0C 64 00  - 9869
ignore 0F 19 86 10 51AEFA 000000 0A B0 DA 0C 64 00  - 9895
ignore 0F F1 86 10 51A531 000000 0A B0 DA 0C 59 00  - 10151
ignore 0F FB 86 10 5FA9E7 000000 0A A8 B1 09 64 00  - 10203
ignore 0C EF 86 5A 515AC7 000000 B0 DA 34  - 10360
ignore 0E EF 84 10 515AC7 000000 0B B0 DA 0F 00  - 10434
ignore 0C EF 84 70 515AC7 000000 00 DA 34  - 10510
ignore 0F E2 86 10 5FA9DA 000000 0A A8 BC 0C 64 00  - 10729
ignore 0F 1A 86 10 51AEFA 000000 0A B0 DA 0C 53 00  - 10760
ignore 0F FC 86 10 5FA9E7 000000 0A A8 B2 09 64 00  - 11106
ignore 0C F0 86 5A 515AC7 000000 B0 DB 34  - 11372
ignore 0F F2 86 10 51A531 000000 0A B0 DB 0C 59 00  - 11413
ignore 0E F0 84 10 515AC7 000000 0B B0 DB 10 00  - 11458
ignore 0C F0 84 70 515AC7 000000 00 DB 34  - 11532
ignore 0F E3 86 10 5FA9DA 000000 0A A8 BD 0C 64 00  - 11911
ignore 0F 1B 86 10 51AEFA 000000 0A B0 DB 0C 44 00  - 11943
ignore 0C F1 86 5A 515AC7 000000 B0 DB 34  - 12290
ignore 0F FD 86 10 5FA9E7 000000 0A A8 B2 09 64 00  - 12347
ignore 0E F1 84 10 515AC7 000000 0B B0 DB 0F 00  - 12425
ignore 0C F1 84 70 515AC7 000000 00 DB 34  - 12500
ignore 0F F3 86 10 51A531 000000 0A B0 DB 0C 3C 00  - 12630
ignore 0F E4 86 10 5FA9DA 000000 0A A8 BD 0C 64 00  - 13049
ignore 0F 1C 86 10 51AEFA 000000 0A B0 DB 0C 44 00  - 13082
ignore 0F FE 86 10 5FA9E7 000000 0A A8 B2 09 64 00  - 13527
ignore 0C F2 86 5A 515AC7 000000 B0 DC 34  - 13598
ignore 0F F4 86 10 51A531 000000 0A B0 DC 0C 3C 00  - 13666
ignore 0E F2 84 10 515AC7 000000 0B B0 DC 0F 00  - 13684
ignore 0C F2 84 70 515AC7 000000 00 DC 34  - 13760
ignore 0F E5 86 10 5FA9DA 000000 0A A8 BD 0C 64 00  - 14045
ignore 0F 1D 86 10 51AEFA 000000 0A B0 DC 0C 34 00  - 14082
ignore 0F FF 86 10 5FA9E7 000000 0A A8 B2 09 64 00  - 14575
ignore 0F F5 86 10 51A531 000000 0A B0 DC 0C 2D 00  - 14616
ignore 0C F3 86 5A 515AC7 000000 B0 DD 34  - 14768
ignore 0E F3 84 10 515AC7 000000 0B B0 DD 0F 00  - 14841
ignore 0C F3 84 70 515AC7 000000 00 DD 34  - 14915
ignore 0F E6 86 10 5FA9DA 000000 0A A8 BD 0C 64 00  - 14948
ignore 0F 1E 86 10 51AEFA 000000 0A B0 DD 0C 34 00  - 14987
ignore 0F F6 86 10 51A531 000000 0A B0 DD 0C 2D 00  - 15476
ignore 0F 00 86 10 5FA9E7 000000 0A A8 B2 09 64 00  - 15538
ignore 0C F4 86 5A 515AC7 000000 B0 DD 34  - 15831
ignore 0E F4 84 10 515AC7 000000 0B B0 DE 10 00  - 15904
ignore 0C F4 84 70 515AC7 000000 00 DE 34  - 15978
ignore 0F E7 86 10 5FA9DA 000000 0A A8 BD 0C 64 00  - 16171
ignore 0F 1F 86 10 51AEFA 000000 0A B0 DD 0C 18 00  - 16211
ignore 0F F7 86 10 51A531 000000 0A B0 DD 0C 17 00  - 16664
ignore 0F 01 86 10 5FA9E7 000000 0A A8 B2 09 64 00  - 16687
ignore 0C F5 86 5A 515AC7 000000 B0 DE 34  - 16799
ignore 0E F5 84 10 515AC7 000000 0B B0 DE 0F 00  - 16873
ignore 0C F5 84 70 515AC7 000000 00 DE 34  - 16949
ignore 0F E8 86 10 5FA9DA 000000 0A A8 BD 0C 64 00  - 17301
ignore 0F 20 86 10 51AEFA 000000 0A B0 DE 0C 08 00  - 17344
ignore 0C F6 86 5A 515AC7 000000 B0 DE 34  - 17653
ignore 0F 02 86 10 5FA9E7 000000 0A A8 B2 09 64 00  - 17737
ignore 0F F8 86 10 51A531 000000 0A B0 DE 0C 01 00  - 17780
ignore 0C F6 84 70 515AC7 000000 00 DE 34  - 17813
ignore 0F 1F 94 3F 4F6DA4 000000 02 04 23 4E 65 BB  - 18200
ignore 0F E9 86 10 5FA9DA 000000 0A 88 BD 0C 64 00  - 18337
ignore 0F 21 86 10 51AEFA 000000 0A B0 DE 0C 00 00  - 18382
ignore 0F 03 86 10 5FA9E7 000000 0A A8 B2 09 64 00  - 18690
ignore 0F F9 86 10 51A531 000000 0A B0 DE 0C 00 00  - 18774
ignore 0C F7 86 5A 515AC7 000000 B0 DF 34  - 18874
Kann man nun irgendwie identifizieren wer da soviel funkt?

Edit:

Folgende Meldungen sind mir nun im Log aufgefallen:

Code: Alles auswählen

Oct  8 17:59:53 ccu3-webui user.err rfd: XmlRpc transport error calling system.listMethods({"BidCos-RF_java"}) on http://127.0.0.1:9292/bidcos:
Oct  8 17:59:53 ccu3-webui user.err rfd: XmlRpc transport error calling system.listMethods({"1007"}) on binary://127.0.0.1:1999/RPC2:
Oct  8 17:59:57 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","CENTRAL","PONG","NEQ1330453"}]}) on binary://127.0.0.1:1999/RPC2:
Oct  8 17:59:57 ccu3-webui user.err rfd: XmlRpc transport error
Oct  8 17:59:57 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"BidCos-RF_java","CENTRAL","PONG","NEQ1330453"}]}) on http://127.0.0.1:9292/bidcos:
Oct  8 17:59:57 ccu3-webui user.err rfd: XmlRpc transport error
Oct  8 17:59:57 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 17:59:57 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 17:59:57 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 17:59:57 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 17:59:57 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 17:59:57 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 17:59:57 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 17:59:57 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 17:59:57 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 17:59:57 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 18:00:02 ccu3-webui user.info kernel: [367098.750843] eq3loop: eq3loop_close_slave() mmd_hmip
Oct  8 18:00:12 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","CENTRAL","PONG","NEQ1330453"}]}) on binary://127.0.0.1:1999/RPC2:
Oct  8 18:00:12 ccu3-webui user.err rfd: XmlRpc transport error
Oct  8 18:00:27 ccu3-webui user.err rfd: XmlRpcClient error calling event({[methodName:"event",params:{"1007","CENTRAL","PONG","NEQ1330453"}]}) on binary://127.0.0.1:1999/RPC2:
Oct  8 18:00:27 ccu3-webui user.err rfd: XmlRpc transport error
Oct  8 18:00:33 ccu3-webui user.info homematic: meine-homematic.de Versions - Upgrade auf 1.503
Oct  8 18:00:33 ccu3-webui user.info homematic: meine-homematic.de VPN Dienst und Autoupdate DEAKTIVIERT
Oct  8 18:00:38 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JPOT200002:1","TEMPERATURE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Oct  8 18:00:38 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JPOT200002:2","TEMPERATURE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Oct  8 18:00:38 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JPOT200002:3","TEMPERATURE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Oct  8 18:00:38 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JPOT200002:4","TEMPERATURE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Oct  8 18:00:38 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JPOT200002:5","TEMPERATURE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Oct  8 18:00:38 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Oct  8 18:23:47 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPSw1CT001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:23:47 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPSw1CT001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:24:48 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPSw1CT001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:24:48 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPSw1CT001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:01 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:01 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:04 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:04 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:05 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:05 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:07 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:07 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:08 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:08 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:12 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:12 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:13 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:13 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:15 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:15 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:16 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:16 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:17 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:17 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:18 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:18 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:19 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:19 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:20 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:20 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:21 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 18:30:21 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::GetObjectByHSSAddress: no exists device object with address= JPRC2FM001:0 [iseXmlRpc.cpp:2167]
Oct  8 20:19:17 ccu3-webui local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: string channels = "1834	1837	1840	1843	1846";string timestamps = "08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	"; [iseESPexec.cpp:12575]
Oct  8 20:19:20 ccu3-webui local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: string channels = "1834	1837	1840	1843	1846";string timestamps = "08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	"; [iseESPexec.cpp:12575]
Oct  8 20:19:23 ccu3-webui local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: string channels = "1834	1837	1840	1843	1846";string timestamps = "08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	"; [iseESPexec.cpp:12575]
Oct  8 20:19:26 ccu3-webui local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: string channels = "1834	1837	1840	1843	1846";string timestamps = "08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	"; [iseESPexec.cpp:12575]
Oct  8 20:19:29 ccu3-webui local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: string channels = "1834	1837	1840	1843	1846";string timestamps = "08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	"; [iseESPexec.cpp:12575]
Oct  8 20:19:32 ccu3-webui local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: string channels = "1834	1837	1840	1843	1846";string timestamps = "08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	"; [iseESPexec.cpp:12575]
Oct  8 20:19:35 ccu3-webui local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: string channels = "1834	1837	1840	1843	1846";string timestamps = "08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	"; [iseESPexec.cpp:12575]
Oct  8 20:19:38 ccu3-webui local0.err ReGaHss: Error: IseESP::ScriptRuntimeError: string channels = "1834	1837	1840	1843	1846";string timestamps = "08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	08.10.2018 18:31:22	"; [iseESPexec.cpp:12575]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:5","TEMPERATURE",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1848 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:5","LOWBAT",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1847 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:4","TEMPERATURE",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1845 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:4","LOWBAT",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1844 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:3","TEMPERATURE",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1842 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:3","LOWBAT",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1841 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:2","TEMPERATURE",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1839 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:2","LOWBAT",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1838 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:1","TEMPERATURE",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1836 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:1","LOWBAT",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1835 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:0","UPDATE_PENDING",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1830 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:0","UNREACH",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1826 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:0","STICKY_UNREACH",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1822 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:0","RSSI_PEER",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1821 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:0","RSSI_DEVICE",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1820 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:0","LOWBAT",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1816 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:0","DEVICE_IN_BOOTLOADER",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1812 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =reportValueUsage Params = {"JPOT200002:0","CONFIG_PENDING",0} result= [faultCode:-2,faultString:"Unknown instance"] [iseXmlRpc.cpp:2605]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallReportValueUsage: CallXmlrpcMethod failed [iseXmlRpc.cpp:1673]
Oct  9 05:44:23 ccu3-webui local0.err ReGaHss: Error: RemoveDPFromCollections: rpc.CallReportValueUsage failed dp id = 1808 [iseManageDP.cpp:439]
Oct  9 05:44:23 ccu3-webui user.debug hm_deldev: event fired (delete JPOT200002)
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JPOT200002:1","TEMPERATURE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JPOT200002:2","TEMPERATURE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JPOT200002:3","TEMPERATURE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JPOT200002:4","TEMPERATURE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui user.err rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallXmlrpcMethod: execute result isFault; method =getValue Params = {"JPOT200002:5","TEMPERATURE"} result= [faultCode:-1,faultString:"Failure"] [iseXmlRpc.cpp:2605]
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseXmlRpc::CallGetValue: CallXmlrpcMethod failed [iseXmlRpc.cpp:1432]
Oct  9 05:53:29 ccu3-webui local0.err ReGaHss: Error: IseHssDP::ReadValue: CallGetValue failed; sVal = 0.000000 [iseDOMdpHSS.cpp:130]
Oct  9 05:53:35 ccu3-webui user.err rfd: XmlRpcClient error calling readdedDevice({"1007",{"JPOT200002","JPOT200002:0","JPOT200002:1","JPOT200002:2","JPOT200002:3","JPOT200002:4","JPOT200002:5"}}) on binary://127.0.0.1:1999/RPC2:
Oct  9 05:53:35 ccu3-webui user.err rfd: XmlRpc fault: [faultCode:-1,faultString:"readdedDevice: unknown method name"]
Oct  9 05:54:05 ccu3-webui user.err rfd: XmlRpcClient error calling readdedDevice({"1007",{"JPOT200002","JPOT200002:0","JPOT200002:1","JPOT200002:2","JPOT200002:3","JPOT200002:4","JPOT200002:5"}}) on binary://127.0.0.1:1999/RPC2:
Oct  9 05:54:05 ccu3-webui user.err rfd: XmlRpc fault: [faultCode:-1,faultString:"readdedDevice: unknown method name"]
Wie zu sehen ist, habe ich den Sensor um 05:44 gelöscht und neu angemeldet. Allerdings gibts nach wie vor Fehler. Ist das "normal"?

Edit2:

Zusätzlich fiel mir gerade beim rumspielen in der CCU auf, dass ich auch keine Konfig ans Gerät übertragen kann. Die CCU meldet immer nicht erreichbar - Konfiguration ausstehend. Kann es ein Reichweitenproblem sein? Habe da aktuell diese gebogene Antenne vom CC1101 Modul dran. Der Raspberry steht circa 10m Luftlinie enfernt. Dazwischen liegen 2 24er Mauern. Wenn ich den Raspberry dann neustarte, werden die Daten übertragen und die Temperaturen aktualisiert. Anschließend wieder das gleiche Phonemen. Ich verstehe es echt nicht :P

Edit3:

Nach dem Neustart wurde mit der Aktor unter ../tools/devconfig.cgi?cmd=show_rssi&.. mit einem RSSI-Wert von 48 angezeigt. Nach ein paar Minuten ändert sich dieser auf -191. Anschließend werden auch keine Konfigurationen mehr übertragen. Erst nach einem neustart der CCU/Raspberry ist das Gerät wieder für ein paar Minuten erreichbar. Ich werde mal sehen ob es zwischendurch mal wieder auftaucht.

fanavity
Beiträge: 100
Registriert: 18.07.2017, 16:42

Re: HM-WDS30-OT2-NTC - Liefert falsche werte

Beitrag von fanavity » 10.10.2018, 08:33

So es scheint nun zu funktionieren.

Ich habe einen neuen Arduino mit neuem CC1101 Modul genommen und die beiden NTC wieder verbaut. Nun bekomme ich circa alle 3 Minuten die aktuellen Temperaturen geupdatet. Ich würde nun gern die Differenz aus innen und Außentemperatur ermitteln. Wie lang Kann ich die Zuleitung des NTC machen, ohne dadurch Messungenauigkeiten zu erhalten?

Antworten

Zurück zu „Hardwareentwicklung und Selbstbau von Aktoren und Sensoren“