HB-Dis-EP-42BW - 4.2" ePaper Display

Entwicklung und Bau von Hardware aller Art, die im HM-Umfeld eingesetzt werden kann

Moderator: Co-Administratoren

TomMajor
Beiträge: 1344
Registriert: 30.08.2017, 23:25
Hat sich bedankt: 104 Mal
Danksagung erhalten: 260 Mal
Kontaktdaten:

Re: HB-Dis-EP-42BW - 4.2" ePaper Display

Beitrag von TomMajor » 02.02.2021, 01:08

ich hatte übrigens neulich eine vermutliche AVR Flash oder EEPROM Korruption in meinem Display nach ca. 2 Jahren Laufzeit ohne Fehler, hatte ich glaube ich hier im thread erwähnt. Ich habe dann komplett neu geflasht (aber nicht abgelernt) danach ging alles wieder.
Viele Grüße,
Tom

chka
Beiträge: 2120
Registriert: 13.02.2012, 20:23
System: Alternative CCU (auf Basis OCCU)
Hat sich bedankt: 89 Mal
Danksagung erhalten: 49 Mal

Re: HB-Dis-EP-42BW - 4.2" ePaper Display

Beitrag von chka » 06.02.2021, 11:12

habbe diesen teil mal ein wenig angepasst https://github.com/TomMajor/SmartHome/b ... #L218-L220

Code: Alles auswählen

   set date [clock seconds]
set date [clock format $date -format {%Y.%m.%d  %T}]
set split " - "
    set fileId [open "/tmp/debug.log" "a+"]
        puts $fileId $date$split$text
        close $fileId
mal sehen was jetzt rauskommt

das mit dem neufassen wäre ne Idee allerdings läuft er nach Batterie raus rein ohne Probleme eine zeitlang
Debmatic - CuL V2 868mHz- CuxDemon - PioTek Tracker - Velux und Somfy Anbindung- io.Broker aufm ESX 6.7
Keine Support PNs Danke!

chka
Beiträge: 2120
Registriert: 13.02.2012, 20:23
System: Alternative CCU (auf Basis OCCU)
Hat sich bedankt: 89 Mal
Danksagung erhalten: 49 Mal

Re: HB-Dis-EP-42BW - 4.2" ePaper Display

Beitrag von chka » 07.02.2021, 12:14

so jetzt ist es passiert und das auch gleichzeitig, wichtig zu wissen der um jeweils 1. Sekunden ist der erste und mit 11 Sekunden der 2.

Code: Alles auswählen

2021.02.07  09:45:11 - 0x02,0x0A,0x12,0x40,0x70,0x30,0x33,0x81,0x20,0x40,0x70,0x34,0x35,0x32,0x2E,0x33,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x39,0x31,0x25,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x30,0x2E,0x$
2021.02.07  09:45:11 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x35,0x33,0x30,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x30,0x39,0x3a,0x34,0x35,0x20,0x88,0x20,0x31,0x38,0x25,0x0A,0x03
2021.02.07  10:00:01 - 0x02,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x30,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x34,0x38,0x25,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x85,0x40,0x70,0x34,0x35,0x30,0x$
2021.02.07  10:00:01 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x37,0x30,0x30,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x30,0x3a,0x30,0x30,0x20,0x88,0x20,0x31,0x38,0x25,0x0A,0x03
2021.02.07  10:00:11 - 0x02,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x30,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x34,0x38,0x25,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x85,0x40,0x70,0x34,0x35,0x30,0x$
2021.02.07  10:00:11 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x37,0x30,0x30,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x30,0x3a,0x30,0x30,0x20,0x88,0x20,0x31,0x38,0x25,0x0A,0x03
2021.02.07  10:15:01 - 0x02,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x31,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x34,0x38,0x25,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x85,0x40,0x70,0x34,0x35,0x30,0x$
2021.02.07  10:15:01 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x37,0x33,0x32,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x30,0x3a,0x31,0x35,0x20,0x88,0x20,0x31,0x38,0x25,0x0A,0x03
2021.02.07  10:15:11 - 0x02,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x31,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x34,0x38,0x25,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x85,0x40,0x70,0x34,0x35,0x30,0x$
2021.02.07  10:15:11 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x37,0x33,0x32,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x30,0x3a,0x31,0x35,0x20,0x88,0x20,0x31,0x38,0x25,0x0A,0x03
2021.02.07  10:30:01 - 0x02,0x0A,0x12,0x40,0x70,0x30,0x33,0x81,0x20,0x40,0x70,0x34,0x35,0x32,0x2E,0x34,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x39,0x30,0x25,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x$
2021.02.07  10:30:01 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x38,0x34,0x31,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x30,0x3a,0x33,0x30,0x20,0x88,0x20,0x31,0x37,0x25,0x0A,0x03
2021.02.07  10:30:11 - 0x02,0x0A,0x12,0x40,0x70,0x30,0x33,0x81,0x20,0x40,0x70,0x34,0x35,0x32,0x2E,0x34,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x39,0x30,0x25,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x$
2021.02.07  10:30:11 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x38,0x34,0x31,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x30,0x3a,0x33,0x30,0x20,0x88,0x20,0x31,0x37,0x25,0x0A,0x03
2021.02.07  10:45:01 - 0x02,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x85,0x40,0x70,0x34,0x35,0x38,0x8b,0x20,0x20,0x40,0x70,0x37,0x38,0x4f,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x03
2021.02.07  10:45:01 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x31,0x30,0x37,0x31,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x30,0x3a,0x34,0x35,0x20,0x88,0x20,0x31,0x37,0x25,0x0A,0x03
2021.02.07  10:45:11 - 0x02,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x85,0x40,0x70,0x34,0x35,0x38,0x8b,0x20,0x20,0x40,0x70,0x37,0x38,0x4f,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x03
2021.02.07  10:45:11 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x31,0x30,0x37,0x31,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x30,0x3a,0x34,0x35,0x20,0x88,0x20,0x31,0x37,0x25,0x0A,0x03
2021.02.07  11:00:01 - 0x02,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x33,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x34,0x37,0x25,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x85,0x40,0x70,0x34,0x35,0x31,0x$
2021.02.07  11:00:01 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x39,0x32,0x32,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x31,0x3a,0x30,0x30,0x20,0x88,0x20,0x31,0x34,0x25,0x0A,0x03
2021.02.07  11:00:11 - 0x02,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x33,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x34,0x37,0x25,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x85,0x40,0x70,0x34,0x35,0x31,0x$
2021.02.07  11:00:11 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x39,0x31,0x36,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x31,0x3a,0x30,0x30,0x20,0x88,0x20,0x31,0x34,0x25,0x0A,0x03
2021.02.07  11:15:01 - 0x02,0x0A,0x12,0x40,0x70,0x30,0x33,0x81,0x20,0x40,0x70,0x34,0x35,0x32,0x2E,0x34,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x39,0x31,0x25,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x$
2021.02.07  11:15:01 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x36,0x38,0x30,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x31,0x3a,0x31,0x35,0x20,0x88,0x20,0x31,0x37,0x25,0x0A,0x03
2021.02.07  11:15:11 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x36,0x38,0x30,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x31,0x3a,0x31,0x35,0x20,0x88,0x20,0x31,0x37,0x25,0x0A,0x03
2021.02.07  11:15:11 - 0x02,0x0A,0x12,0x40,0x70,0x30,0x33,0x81,0x20,0x40,0x70,0x34,0x35,0x32,0x2E,0x34,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x39,0x31,0x25,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x$
2021.02.07  11:30:01 - 0x02,0x0A,0x12,0x40,0x70,0x30,0x33,0x81,0x20,0x40,0x70,0x34,0x35,0x31,0x2E,0x38,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x39,0x30,0x25,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x85,0x40,0x70,0x34,0x35,0x32,0x30,0x$
2021.02.07  11:30:01 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x39,0x37,0x33,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x31,0x3a,0x33,0x30,0x20,0x88,0x20,0x31,0x36,0x25,0x0A,0x03
2021.02.07  11:30:11 - 0x02,0x0A,0x12,0x40,0x70,0x30,0x33,0x81,0x20,0x40,0x70,0x34,0x35,0x31,0x2E,0x38,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x39,0x30,0x25,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x85,0x40,0x70,0x34,0x35,0x32,0x30,0x$
2021.02.07  11:30:11 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x39,0x37,0x33,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x31,0x3a,0x33,0x30,0x20,0x88,0x20,0x31,0x36,0x25,0x0A,0x03
2021.02.07  11:45:01 - 0x02,0x0A,0x12,0x40,0x70,0x30,0x33,0x81,0x20,0x40,0x70,0x34,0x35,0x31,0x2E,0x34,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x39,0x30,0x25,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x$
2021.02.07  11:45:01 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x31,0x31,0x39,0x32,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x31,0x3a,0x34,0x35,0x20,0x88,0x20,0x31,0x36,0x25,0x0A,0x03
2021.02.07  11:45:11 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x31,0x31,0x33,0x35,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x31,0x3a,0x34,0x35,0x20,0x88,0x20,0x31,0x36,0x25,0x0A,0x03
0x35,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x34,0x37,0x25,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x85,0x40,0x70,0x34,0x35,0x32,0x36,0x8b,0x20,0x20,0x40,0x70,0x37,0x38,0x4e,0x4f,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x03
2021.02.07  12:15:00 - 0x02,0x0A,0x12,0x40,0x70,0x30,0x33,0x81,0x20,0x40,0x70,0x34,0x35,0x31,0x2E,0x30,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x39,0x31,0x25,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x$
2021.02.07  12:15:00 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x31,0x33,0x30,0x38,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x32,0x3a,0x31,0x35,0x20,0x88,0x20,0x31,0x35,0x25,0x0A,0x03
2021.02.07  12:15:10 - 0x02,0x0A,0x12,0x40,0x70,0x30,0x33,0x81,0x20,0x40,0x70,0x34,0x35,0x31,0x2E,0x30,0x89,0x20,0x20,0x40,0x70,0x37,0x38,0x39,0x31,0x25,0x0A,0x12,0x40,0x70,0x30,0x33,0x82,0x20,0x40,0x70,0x34,0x35,0x32,0x31,0x2E,0x$
2021.02.07  12:15:10 - 0x02,0x0A,0x0A,0x0A,0x0A,0x0A,0x0A,0x12,0x40,0x70,0x30,0x33,0x87,0x20,0x40,0x70,0x34,0x35,0x31,0x33,0x30,0x38,0x20,0x8c,0x0A,0x0A,0x0A,0x12,0x31,0x32,0x3a,0x31,0x35,0x20,0x88,0x20,0x31,0x35,0x25,0x0A,0x03
noch das was in der systemvariable jeweils stand:
der erste

Code: Alles auswählen

/1 So, 07.02.2021 @t01 5%09/2 @[email protected] @[email protected] @p7890%%09/3 @[email protected] @[email protected] @p7847%%09/4 @[email protected]@p300 @[email protected] @[email protected]%09/5 @[email protected]@[email protected] @p78NO%09/6 @[email protected]@[email protected]%09/7 @[email protected] @p451192 @t13%09/8 @t16 [email protected] @t15 [email protected] 21%09/9 GLATTEIS 17%09/10 11:45 @t09 16%	true	hm-rega.0	2021-02-07 11:45:28.393	
/1 So, 07.02.2021 @t01 5%09/2 @[email protected] @[email protected] @p7890%%09/3 @[email protected] @[email protected] @p7847%%09/4 @[email protected]@p300 @[email protected] @[email protected]%09/5 @[email protected]@[email protected] @p78NO%09/6 @[email protected]@[email protected]%09/7 @[email protected] @p45973 @t13%09/8 @t16 [email protected] @t15 [email protected] 21%09/9 GLATTEIS 17%09/10 11:30 @t09 16%	true	hm-rega.0	2021-02-07 11:30:28.380	
/1 So, 07.02.2021 @t01 5%09/2 @[email protected] @[email protected] @p7891%%09/3 @[email protected] @[email protected] @p7847%%09/4 @[email protected]@p300 @[email protected] @[email protected]%09/5 @[email protected]@[email protected] @p78NO%09/6 @[email protected]@[email protected]%09/7 @[email protected] @p45680 @t13%09/8 @t16 [email protected] @t15 [email protected] 21%09/9 GLATTEIS 17%09/10 11:15 @t09 17%	true
und der zweite

Code: Alles auswählen

/1 So, 07.02.2021 @t01 5%09/2 @[email protected] @[email protected] @p7891%%09/3 @[email protected] @[email protected] @p7848%%09/4 @[email protected]@p300 @[email protected] @[email protected]%09/5 @[email protected]@[email protected] @p78N%09/6 @[email protected]@[email protected]%09/7 @[email protected] @p451308 @t13%09/8 @t16 [email protected] @t15 [email protected] 21%09/9 GLATTEIS 17%09/10 12:15 @t09 15%	true	hm-rega.0	2021-02-07 12:15:28.425	
/1 So, 07.02.2021 @t01 5%09/2 @[email protected] @[email protected] @p7890%%09/3 @[email protected] @[email protected] @p7847%%09/4 @[email protected]@p300 @[email protected] @[email protected]%09/5 @[email protected]@[email protected] @p78NO%09/6 @[email protected]@[email protected]%09/7 @[email protected] @p451135 @t13%09/8 @t16 [email protected] @t15 [email protected] 21%09/9 GLATTEIS 17%09/10 11:45 @t09 16%	true	hm-rega.0	2021-02-07 11:45:28.393	
/1 So, 07.02.2021 @t01 5%09/2 @[email protected] @[email protected] @p7890%%09/3 @[email protected] @[email protected] @p7847%%09/4 @[email protected]@p300 @[email protected] @[email protected]%09/5 @[email protected]@[email protected] @p78NO%09/6 @[email protected]@[email protected]%09/7 @[email protected] @p45973 @t13%09/8 @t16 [email protected] @t15 [email protected] 21%09/9 GLATTEIS 17%09/10 11:30 @t09 16%	true	hm-rega.0	2021-02-07 11:30:28.380
interessanterweise ist er um 12:15 wieder gestartet
Debmatic - CuL V2 868mHz- CuxDemon - PioTek Tracker - Velux und Somfy Anbindung- io.Broker aufm ESX 6.7
Keine Support PNs Danke!

raumteiler
Beiträge: 2
Registriert: 17.02.2021, 09:34
System: CCU

Re: HB-Dis-EP-42BW - 4.2" ePaper Display

Beitrag von raumteiler » 17.02.2021, 09:56

Hallo zusammen,
vielen Danke an alle Beteiligten für das super Projekt. Nach ein paar Problemen mit dem Flashen läuft das Display nun.
Ich habe noch zwei Platinen (gefertigt von Aisler) rumliegen. Ich musste 3 Stk. für 31,15 € inkl. Versand nehmen. Wer hat Interesse?

Eine Frage habe ich noch:
Wenn ich das Display einmal angelernt hatte und auch was angezeigt bekommen habe, wie kann ich das Display dann wieder zurücksetzen damit ich das Startbild mit der Seriennummer wieder sehen?

VG
Michael

stan23
Beiträge: 1420
Registriert: 13.12.2016, 21:14
System: Alternative CCU (auf Basis OCCU)
Wohnort: Altmühltal
Hat sich bedankt: 323 Mal
Danksagung erhalten: 169 Mal
Kontaktdaten:

Re: HB-Dis-EP-42BW - 4.2" ePaper Display

Beitrag von stan23 » 17.02.2021, 12:02

Das sollte wieder erscheinen wenn du einen Werksreset machst (Config-Button etwa 10 Sekunden lang drücken).
Viele Grüße
Marco

RaspberryMatic als VM auf einem NUC mit Proxmox und USB-Funkmodul
~80 Geräte (HM, HmIP, HMW, HBW, AskSin)

raumteiler
Beiträge: 2
Registriert: 17.02.2021, 09:34
System: CCU

Re: HB-Dis-EP-42BW - 4.2" ePaper Display

Beitrag von raumteiler » 17.02.2021, 14:10

Danke für die Info. Da es gerade ordentlich läuft, werde ich aber auf einen Test verzichten. Aber gut zu wissen.

VG Michael

chka
Beiträge: 2120
Registriert: 13.02.2012, 20:23
System: Alternative CCU (auf Basis OCCU)
Hat sich bedankt: 89 Mal
Danksagung erhalten: 49 Mal

Re: HB-Dis-EP-42BW - 4.2" ePaper Display

Beitrag von chka » 20.02.2021, 23:36

es waren bei mir wieder die Batterien die lehr waren :evil: wieso auch immer verbraucht der Bildschirm zu viel strom
Debmatic - CuL V2 868mHz- CuxDemon - PioTek Tracker - Velux und Somfy Anbindung- io.Broker aufm ESX 6.7
Keine Support PNs Danke!

Pihero
Beiträge: 210
Registriert: 02.08.2019, 21:24
Wohnort: Pforzheim
Hat sich bedankt: 1 Mal
Danksagung erhalten: 3 Mal

Re: HB-Dis-EP-42BW - 4.2" ePaper Display

Beitrag von Pihero » 28.02.2021, 10:18

Hallo Zusammen,

wenn ich es richtig gelesen habe sollten die Taster doch auch in Direktverknüpfungen verwendbar sein.
Beim mir ist das nicht möglich.
Irgendwie stehen immer zwei Kanäle zusammengefasst.
Bildschirmfoto 2021-02-28 um 10.16.55.png
wenn ich dann "Auswahl" betätige kann ich kein anderes Gerät zur Verknüpfung auswählen.

Danke und Gruß, Philipp

jp112sdl
Beiträge: 8097
Registriert: 20.11.2016, 20:01
Hat sich bedankt: 442 Mal
Danksagung erhalten: 998 Mal
Kontaktdaten:

Re: HB-Dis-EP-42BW - 4.2" ePaper Display

Beitrag von jp112sdl » 28.02.2021, 11:11

Pihero hat geschrieben:
28.02.2021, 10:18
Irgendwie stehen immer zwei Kanäle zusammengefasst.
Das ist bei Homematic Tastern generell so üblich
Pihero hat geschrieben:
28.02.2021, 10:18
wenn ich dann "Auswahl" betätige kann ich kein anderes Gerät zur Verknüpfung auswählen.
Was für ein Gerät (Typbezeichnung HM-...) möchtest du denn verknüpfen?

VG,
Jérôme ☕️

---
Support for my Homebrew-Devices: Download JP-HB-Devices Addon

PN sind deaktiviert!

Pihero
Beiträge: 210
Registriert: 02.08.2019, 21:24
Wohnort: Pforzheim
Hat sich bedankt: 1 Mal
Danksagung erhalten: 3 Mal

Re: HB-Dis-EP-42BW - 4.2" ePaper Display

Beitrag von Pihero » 28.02.2021, 21:41

Ok,

Ich habe nur hmip Geräte.
Wollte zu einem schaltaktor verknüpfen...aber dann ist ja klar warum das nicht funktioniert.
Muss ich ein Programm verwenden...

Danke und Gruß, Philipp

Antworten

Zurück zu „Hardwareentwicklung und Selbstbau von Aktoren und Sensoren“