Neue Platine HB-RF-USB-2

Entwicklung und Bau von Hardware aller Art, die im HM-Umfeld eingesetzt werden kann

Moderator: Co-Administratoren

torbar
Beiträge: 13
Registriert: 29.07.2021, 19:53
System: Alternative CCU (auf Basis OCCU)

Re: Neue Platine HB-RF-USB-2

Beitrag von torbar » 30.07.2021, 15:55

wow ... danke .. :) darauf hätte ich auch mal selbst kommen koennen. Hab gleich mal ein original netzteil bestellt. Dann sollte das mit dem Stromproblem geloest sein

torbar
Beiträge: 13
Registriert: 29.07.2021, 19:53
System: Alternative CCU (auf Basis OCCU)

Re: Neue Platine HB-RF-USB-2

Beitrag von torbar » 30.07.2021, 16:20

wow, das sieht super aus :)

pi@raspberrypi:~ $ sudo debmatic-info
debmatic version: 3.59.6-73
Kernel modules: Available
Raw UART dev: Available
HMRF Hardware: RPI-RF-MOD
Connected via: HB-RF-USB-2@usb-0000:01:00.0-1.4 (/dev/raw-uart)
Board serial: 5A4993EC2E
Radio MAC: 0xFFEC2E
HMIP Hardware: RPI-RF-MOD
SGTIN: 3014F711A0001F5A4993EC2E
Radio MAC: 0xB96A1E
pi@raspberrypi:~ $

1.000 dank !!!

torbar
Beiträge: 13
Registriert: 29.07.2021, 19:53
System: Alternative CCU (auf Basis OCCU)

Re: Neue Platine HB-RF-USB-2

Beitrag von torbar » 30.07.2021, 18:46

Hi Alex,

Eine letzte frage, wenn ich jetzt die pivccu installieren moechte, ist das supported unter PI4B ?
Bei meinem letzten versuch wurde Debmatic dabei deinstalliert, was ja auch verstaendlich ist, da es ja nur eine CCU ist.

Torsten

scorpionking
Beiträge: 661
Registriert: 14.02.2016, 12:32
System: Alternative CCU (auf Basis OCCU)
Wohnort: Heidenheim
Hat sich bedankt: 34 Mal
Danksagung erhalten: 105 Mal

Re: Neue Platine HB-RF-USB-2

Beitrag von scorpionking » 31.07.2021, 11:59

Du musst dich halt für eins von beiden entscheiden. Entweder installierst du piVCCU oder debmatic nach Anleitung, auf einem Raspberry geht beides.

torbar
Beiträge: 13
Registriert: 29.07.2021, 19:53
System: Alternative CCU (auf Basis OCCU)

Re: Neue Platine HB-RF-USB-2

Beitrag von torbar » 04.08.2021, 20:40

Hi Alex,

ja, ich moechte gern die pivccu3 installieren. Also habe ich das OS neu installiert.

mein Strom problem ist mittlerweile geloest, dank neuem Netzteil :)

Ich bekomme in Step 2 folgende Meldung:

pi@raspberrypi:~ $ sudo apt update
Get:1 http://archive.raspberrypi.org/debian buster InRelease [32.6 kB]
Get:2 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB]
Hit:3 https://www.pivccu.de/piVCCU stable InRelease
Get:4 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages [13.0 MB]
Get:5 http://archive.raspberrypi.org/debian buster/main armhf Packages [378 kB]
Fetched 13.4 MB in 7s (2,017 kB/s)
Reading package lists... Done
Building dependency tree
Reading state information... Done
11 packages can be upgraded. Run 'apt list --upgradable' to see them.
N: Ignoring file 'pivccu.list#' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension

Torsten

torbar
Beiträge: 13
Registriert: 29.07.2021, 19:53
System: Alternative CCU (auf Basis OCCU)

Re: Neue Platine HB-RF-USB-2

Beitrag von torbar » 05.08.2021, 17:37

scheibar gab es die datei 2x ... und davon einmal richtig.
Ich poste mal den weiteren output, da scheint irgendetwas mit dem Kernel header nicht zu passen.


Hat da jemand eine Idee ?
Wenn ich die pivccu installieren wuerde (alle anderen Steps vorausgesetz kommt dann immer eine Fehlemeldung nachdem ich das RPI-RF-MOD ausgewählt habe ... kann ich noch nicht posten, da ich hoffe hier kann mir jemand vorher helfen :) ?


pi@raspberrypi:/etc/apt/sources.list.d $ ls -l
total 16
-rw-r--r-- 1 root root 45 Aug 4 19:35 pivccu.list
-rw-r--r-- 1 root root 45 Aug 4 19:35 pivccu.list#
-rw-r--r-- 1 root root 187 May 7 15:43 raspi.list
-rw-r--r-- 1 root root 41 May 7 15:43 vscode.list
pi@raspberrypi:/etc/apt/sources.list.d $ cat pivccu.list
deb https://www.pivccu.de/piVCCU stable main
pi@raspberrypi:/etc/apt/sources.list.d $ cat pivccu.list#
deb https://www.pivccu.de/piVCCU stable main
pi@raspberrypi:/etc/apt/sources.list.d $

pi@raspberrypi:/etc/apt/sources.list.d $ sudo apt install build-essential bison flex libssl-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
bison is already the newest version (2:3.3.2.dfsg-1).
bison set to manually installed.
build-essential is already the newest version (12.6).
flex is already the newest version (2.6.4-6.2).
flex set to manually installed.
Suggested packages:
libssl-doc
The following NEW packages will be installed:
libssl-dev
0 upgraded, 1 newly installed, 0 to remove and 11 not upgraded.
Need to get 1,584 kB of archives.
After this operation, 5,939 kB of additional disk space will be used.
N: Ignoring file 'pivccu.list#' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
Do you want to continue? [Y/n] Y
Get:1 http://archive.raspberrypi.org/debian buster/main armhf libssl-dev armhf 1.1.1d-0+deb10u6+rpt1 [1,584 kB]
Fetched 1,584 kB in 0s (4,125 kB/s)
N: Ignoring file 'pivccu.list#' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
Selecting previously unselected package libssl-dev:armhf.
(Reading database ... 158191 files and directories currently installed.)
Preparing to unpack .../libssl-dev_1.1.1d-0+deb10u6+rpt1_armhf.deb ...
Unpacking libssl-dev:armhf (1.1.1d-0+deb10u6+rpt1) ...
Setting up libssl-dev:armhf (1.1.1d-0+deb10u6+rpt1) ...
pi@raspberrypi:/etc/apt/sources.list.d $ sudo apt install raspberrypi-kernel-headers pivccu-modules-dkms
Reading package lists... Done
Building dependency tree
Reading state information... Done
pivccu-modules-dkms is already the newest version (1.0.63).
The following packages will be upgraded:
raspberrypi-kernel-headers
1 upgraded, 0 newly installed, 0 to remove and 10 not upgraded.
Need to get 27.7 MB of archives.
After this operation, 212 kB of additional disk space will be used.
N: Ignoring file 'pivccu.list#' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
Do you want to continue? [Y/n] Y
Get:1 http://archive.raspberrypi.org/debian buster/main armhf raspberrypi-kernel-headers armhf 1:1.20210727-1 [27.7 MB]
Fetched 27.7 MB in 3s (8,412 kB/s)
Reading changelogs... Done
N: Ignoring file 'pivccu.list#' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
(Reading database ... 158308 files and directories currently installed.)
Preparing to unpack .../raspberrypi-kernel-headers_1%3a1.20210727-1_armhf.deb ...
Unpacking raspberrypi-kernel-headers (1:1.20210727-1) over (1:1.20210527-1) ...
Setting up raspberrypi-kernel-headers (1:1.20210727-1) ...
run-parts: executing /etc/kernel/header_postinst.d/dkms 5.10.52+
run-parts: executing /etc/kernel/header_postinst.d/dkms 5.10.52-v7+
run-parts: executing /etc/kernel/header_postinst.d/dkms 5.10.52-v7l+
run-parts: executing /etc/kernel/header_postinst.d/dkms 5.10.52-v8+
Error! echo
Your kernel headers for kernel 5.10.52-v8+ cannot be found at
/lib/modules/5.10.52-v8+/build or /lib/modules/5.10.52-v8+/source.
pi@raspberrypi:/etc/apt/sources.list.d $

torbar
Beiträge: 13
Registriert: 29.07.2021, 19:53
System: Alternative CCU (auf Basis OCCU)

Re: Neue Platine HB-RF-USB-2

Beitrag von torbar » 06.08.2021, 11:08

Hallo,

ich habe mich jetzt dann doch fuer ein fertiges image entschieden, auf dem die pivccu3 mit drauf ist.

https://www.pivccu.de/images/?dir=piVCCU3

Es funktioniert alles bestens :) :) :)

turrican944
Beiträge: 390
Registriert: 29.05.2019, 22:19
Wohnort: Bargfeld
Hat sich bedankt: 3 Mal
Danksagung erhalten: 29 Mal

Re: Neue Platine HB-RF-USB-2

Beitrag von turrican944 » 16.08.2021, 09:35

Moin
Ich habe seit zwei Wochen die Platine auch in Betrieb. Habe ich fertig gekauft. Läuft soweit auch alles wunderbar mit Raspberrymatic als Homeassistant Addon bis auf die Bunten LED. Beim Starten der RM ist sie erstmal gelb und wird dann auch blau (so wie es soll). Nach einiger Zeit ist die LED dann aber aus und geht auch nicht wieder an. Ich habe an der LED nichts gemacht.
Es ist jetzt auch nicht so das ich die LED umbedingt brauche, die Kiste hängt eh auf dem Dachboden, aber ich will gerne verstehen warum sie irgendwann nicht mehr funktioniert. Im Log ist natürlich nichts.
Das hier schonmal angesprochene Problem mit einer neuen Revision der USB RS232 Wandler wird es wohl nicht sein, da sie ja erstmal funktioniert.
Gruß Florian

deimos
Beiträge: 4574
Registriert: 20.06.2017, 10:38
Wohnort: Leimersheim
Hat sich bedankt: 88 Mal
Danksagung erhalten: 586 Mal
Kontaktdaten:

Re: Neue Platine HB-RF-USB-2

Beitrag von deimos » 16.08.2021, 09:40

Hi,

was steht in den Kernel Logs bzw. bei dmesg?

Ich rate mal ins Blaue rein: Raspberry Pi mit schwachem Netzteil und in den Kernel Logs wird manchmal eine Undervoltage geloggt.

Viele Grüße
Alex

turrican944
Beiträge: 390
Registriert: 29.05.2019, 22:19
Wohnort: Bargfeld
Hat sich bedankt: 3 Mal
Danksagung erhalten: 29 Mal

Re: Neue Platine HB-RF-USB-2

Beitrag von turrican944 » 16.08.2021, 10:34

Moin
Kernel Log muss ich Mal schauen , habe ich natürlich nicht.
Nö hängt am einem Odroid N2+.

Natürlich ist was im Kernel Log irgendwie gab's wohl einen USB reconnect , habe ich aber übers mobil Telefon nicht so genau analysiert. Muss ich heute Abend mal schauen.

Habe die Kiste nochmal neugestartet und das USB Kabel gewechselt LED irgendwann wieder aus, im Kernel log sehe ich nichts verdächtiges. LED per Console schaltet passiert auch nix, LED bleibt aus, aber auch egal.

Nur den Raspberrymatic Container neu starten hilft auch nicht, muss den ganzen Homeassistanten neustarten damit sie erstmal wieder leuchtet. Vielleicht pfuscht das HassOS da auch irgendwie mit rein. Egal ich baue das Funkmodul demnächst eh per Ethernet an, Karte ist schon bestellt.

root@de838cd8-raspberrymatic:/var/log# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.10.53 (builder@b0c6a785507a) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot -gf358c8ba-dirty) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP PREEMPT Wed Jul 28 21:15:29 UTC 2021
[ 0.000000] Machine model: Hardkernel ODROID-N2Plus
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000e4c00000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f4e5afff]
[ 0.000000] NUMA: NODE_DATA [mem 0xe4651100-0xe4652fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000f4e5afff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000052fffff]
[ 0.000000] node 0: [mem 0x0000000005300000-0x00000000f4e5afff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000f4e5afff]
[ 0.000000] On node 0 totalpages: 1003099
[ 0.000000] DMA zone: 15674 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 1003099 pages, LIFO batch:63
[ 0.000000] On node 0, zone DMA: 421 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 23 pages/cpu s56472 r8192 d29544 u94208
[ 0.000000] pcpu-alloc: s56472 r8192 d29544 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 987425
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=7abf65ebdbe046739a114f18e59959c0 cgroup_enable=memory fsck.repair=yes root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait rauc.slot=B console=tty0 console=ttyAML0,115200n8
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 3644424K/4012396K available (13440K kernel code, 1428K rwdata, 4128K rodata, 2624K init, 456K bss, 105828K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.000000] random: get_random_bytes called from start_kernel+0x31c/0x4dc with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000198] Console: colour dummy device 80x25
[ 0.000580] printk: console [tty0] enabled
[ 0.000666] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000690] pid_max: default: 32768 minimum: 301
[ 0.000777] LSM: Security Framework initializing
[ 0.000869] AppArmor: AppArmor initialized
[ 0.000929] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000959] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.002773] rcu: Hierarchical SRCU implementation.
[ 0.004780] EFI services will not be available.
[ 0.005179] smp: Bringing up secondary CPUs ...
[ 0.005809] Detected VIPT I-cache on CPU1
[ 0.005867] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.007035] CPU features: detected: ARM erratum 858921
[ 0.007044] CPU features: detected: Spectre-v2
[ 0.007047] CPU features: detected: Spectre-v4
[ 0.007053] Detected VIPT I-cache on CPU2
[ 0.007078] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.007092] arch_timer: CPU2: Trapping CNTVCT access
[ 0.007105] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
[ 0.007706] Detected VIPT I-cache on CPU3
[ 0.007722] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.007728] arch_timer: CPU3: Trapping CNTVCT access
[ 0.007736] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
[ 0.008312] Detected VIPT I-cache on CPU4
[ 0.008327] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.008334] arch_timer: CPU4: Trapping CNTVCT access
[ 0.008342] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
[ 0.008991] Detected VIPT I-cache on CPU5
[ 0.009007] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.009014] arch_timer: CPU5: Trapping CNTVCT access
[ 0.009022] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
[ 0.009100] smp: Brought up 1 node, 6 CPUs
[ 0.009266] SMP: Total of 6 processors activated.
[ 0.009281] CPU features: detected: 32-bit EL0 Support
[ 0.009294] CPU features: detected: CRC32 instructions
[ 0.009306] CPU features: detected: 32-bit EL1 Support
[ 0.019011] CPU: All CPU(s) started at EL2
[ 0.019078] alternatives: patching kernel code
[ 0.020115] devtmpfs: initialized
[ 0.026695] Registered cp15_barrier emulation handler
[ 0.026721] Registered setend emulation handler
[ 0.026732] KASLR disabled due to lack of seed
[ 0.026851] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.026872] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.031583] pinctrl core: initialized pinctrl subsystem
[ 0.031919] DMI not present or invalid.
[ 0.032240] NET: Registered protocol family 16
[ 0.033735] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.033974] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.034273] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.034292] audit: initializing netlink subsys (disabled)
[ 0.034387] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
[ 0.034653] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.034657] thermal_sys: Registered thermal governor 'step_wise'
[ 0.035008] cpuidle: using governor menu
[ 0.035289] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.035390] ASID allocator initialised with 65536 entries
[ 0.036271] Serial: AMBA PL011 UART driver
[ 0.064464] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.064488] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.064498] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.064507] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.065203] cryptd: max_cpu_qlen set to 1000
[ 0.066757] ACPI: Interpreter disabled.
[ 0.067086] reg-fixed-voltage regulator-flash_1v8: Failed to register regulator: -517
[ 0.067258] 5V: supplied by 12V
[ 0.067490] reg-fixed-voltage regulator-vcc_1v8: Failed to register regulator: -517
[ 0.067554] reg-fixed-voltage regulator-vcc_3v3: Failed to register regulator: -517
[ 0.067692] reg-fixed-voltage regulator-vddao_1v8: Failed to register regulator: -517
[ 0.067747] VDDAO_3V3: supplied by 12V
[ 0.068083] iommu: Default domain type: Translated
[ 0.068199] vgaarb: loaded
[ 0.068414] SCSI subsystem initialized
[ 0.068503] libata version 3.00 loaded.
[ 0.068626] usbcore: registered new interface driver usbfs
[ 0.068657] usbcore: registered new interface driver hub
[ 0.068681] usbcore: registered new device driver usb
[ 0.068887] mc: Linux media interface: v0.10
[ 0.068908] videodev: Linux video capture interface: v2.00
[ 0.068943] pps_core: LinuxPPS API ver. 1 registered
[ 0.068952] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.068970] PTP clock support registered
[ 0.069077] EDAC MC: Ver: 3.0.0
[ 0.069475] FPGA manager framework
[ 0.069522] Advanced Linux Sound Architecture Driver Initialized.
[ 0.070194] clocksource: Switched to clocksource arch_sys_counter
[ 0.070314] VFS: Disk quotas dquot_6.6.0
[ 0.070359] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.070694] AppArmor: AppArmor Filesystem Enabled
[ 0.070721] pnp: PnP ACPI: disabled
[ 0.074138] NET: Registered protocol family 2
[ 0.074328] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.076353] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.076416] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.076568] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.076764] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.076858] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.076901] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.077038] NET: Registered protocol family 1
[ 0.077066] PCI: CLS 0 bytes, default 64
[ 0.077993] kvm [1]: IPA Size Limit: 40 bits
[ 0.078591] kvm [1]: vgic interrupt IRQ9
[ 0.078724] kvm [1]: Hyp mode initialized successfully
[ 0.080925] Initialise system trusted keyrings
[ 0.081007] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 0.084683] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.084901] 9p: Installing v9fs 9p2000 file system support
[ 0.113642] Key type asymmetric registered
[ 0.113654] Asymmetric key parser 'x509' registered
[ 0.113682] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.113764] io scheduler mq-deadline registered
[ 0.113773] io scheduler kyber registered
[ 0.116078] gpio-447 (usb-hub-reset): hogged as output/high
[ 0.124206] soc soc0: Amlogic Meson G12B (S922X) Revision 29:c (40:2) Detected
[ 0.125525] VDDCPU_A: supplied by regulator-dummy
[ 0.125797] VDDCPU_B: supplied by regulator-dummy
[ 0.127757] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.129037] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 25, base_baud = 1500000) is a meson_uart
[ 1.088879] printk: console [ttyAML0] enabled
[ 1.093600] ffd24000.serial: ttyAML1 at MMIO 0xffd24000 (irq = 33, base_baud = 1500000) is a meson_uart
[ 1.107694] loop: module loaded
[ 1.107968] zram: Added device: zram0
[ 1.109417] zram: Added device: zram1
[ 1.113091] zram: Added device: zram2
[ 1.118770] libphy: Fixed MDIO Bus: probed
[ 1.121205] tun: Universal TUN/TAP device driver, 1.6
[ 1.126071] thunder_xcv, ver 1.0
[ 1.128742] thunder_bgx, ver 1.0
[ 1.131928] nicpf, ver 1.0
[ 1.134945] hclge is initializing
[ 1.137864] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 1.145019] hns3: Copyright (c) 2017 Huawei Corporation.
[ 1.150303] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.155193] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.161081] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.166405] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.171945] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.178135] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.184098] sky2: driver version 1.30
[ 1.187892] VFIO - User Level meta-driver version: 0.3
[ 1.193898] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.199189] ehci-pci: EHCI PCI platform driver
[ 1.203602] ehci-platform: EHCI generic platform driver
[ 1.208862] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.214879] ohci-pci: OHCI PCI platform driver
[ 1.219297] ohci-platform: OHCI generic platform driver
[ 1.224870] usbcore: registered new interface driver uas
[ 1.229748] usbcore: registered new interface driver usb-storage
[ 1.235719] usbcore: registered new interface driver usbserial_generic
[ 1.242147] usbserial: USB Serial support registered for generic
[ 1.249373] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
[ 1.256403] i2c /dev entries driver
[ 1.262702] rtc-pcf8563 0-0051: registered as rtc0
[ 1.264682] rtc-pcf8563 0-0051: setting system clock to 2021-08-16T15:37:01 UTC (1629128221)
[ 1.274471] gpio-fan gpio-fan: GPIO fan initialized
[ 1.279658] cpufreq: cpufreq_online: CPU2: Running at unlisted initial frequency: 999999 KHz, changing to: 1000000 KHz
[ 1.289229] sdhci: Secure Digital Host Controller Interface driver
[ 1.294064] sdhci: Copyright(c) Pierre Ossman
[ 1.298447] Synopsys Designware Multimedia Card Interface Driver
[ 1.304581] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.310407] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.315997] meson-sm: secure-monitor enabled
[ 1.320191] hid: raw HID events driver (C) Jiri Kosina
[ 1.325343] usbcore: registered new interface driver usbhid
[ 1.330707] usbhid: USB HID core driver
[ 1.334930] meson-saradc ff809000.adc: failed to get vref regulator
[ 1.342568] IPVS: Registered protocols ()
[ 1.344692] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 1.351973] IPVS: ipvs loaded.
[ 1.354944] IPVS: [rr] scheduler registered.
[ 1.359392] NET: Registered protocol family 10
[ 1.363890] Segment Routing with IPv6
[ 1.367226] NET: Registered protocol family 17
[ 1.371611] Bridge firewalling registered
[ 1.375585] 9pnet: Installing 9P2000 support
[ 1.379807] Key type dns_resolver registered
[ 1.384205] registered taskstats version 1
[ 1.388069] Loading compiled-in X.509 certificates
[ 1.392846] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.398447] reg-fixed-voltage regulator-flash_1v8: Failed to register regulator: -517
[ 1.406227] reg-fixed-voltage regulator-vcc_1v8: Failed to register regulator: -517
[ 1.413719] VCC_3V3: supplied by VDDAO_3V3
[ 1.417774] HUB_5V: supplied by 5V
[ 1.421095] USB_PWR_EN: supplied by 5V
[ 1.424773] VDDAO_1V8: supplied by VDDAO_3V3
[ 1.467933] meson-drm ff900000.vpu: Queued 2 outputs on vpu
[ 1.468198] meson-drm ff900000.vpu: CVBS Output connector not available
[ 1.502205] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 1.506519] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 1.514442] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops 0xffff800010e00800)
[ 1.521811] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
[ 1.714610] Console: switching to colour frame buffer device 128x48
[ 1.731943] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 1.739768] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[ 1.744191] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[ 1.751925] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[ 1.756470] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[ 1.763597] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 1.770848] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 1.775940] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1
[ 1.783611] xhci-hcd xhci-hcd.4.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
[ 1.792876] xhci-hcd xhci-hcd.4.auto: irq 41, io mem 0xff500000
[ 1.798902] hub 1-0:1.0: USB hub found
[ 1.802410] hub 1-0:1.0: 2 ports detected
[ 1.806454] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 1.811816] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2
[ 1.819418] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
[ 1.825893] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.834047] hub 2-0:1.0: USB hub found
[ 1.837599] hub 2-0:1.0: 1 port detected
[ 1.841644] dwc3-meson-g12a ffe09000.usb: switching to Device Mode
[ 1.848873] meson-gx-mmc ffe05000.sd: Got CD GPIO
[ 1.854219] FLASH_1V8: supplied by VCC_3V3
[ 1.856393] VCC_1V8: supplied by VCC_3V3
[ 1.861803] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[ 1.868302] printk: console [netcon0] enabled
[ 1.871019] netconsole: network logging started
[ 1.876512] ALSA device list:
[ 1.878840] No soundcards found.
[ 1.901573] Waiting for root device PARTUUID=48617373-08...
[ 2.062193] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 2.184666] mmc1: new HS200 MMC card at address 0001
[ 2.185955] mmcblk1: mmc1:0001 CJTD4R 58.2 GiB
[ 2.189597] mmcblk1boot0: mmc1:0001 CJTD4R partition 1 4.00 MiB
[ 2.195477] mmcblk1boot1: mmc1:0001 CJTD4R partition 2 4.00 MiB
[ 2.201485] mmcblk1rpmb: mmc1:0001 CJTD4R partition 3 4.00 MiB, chardev (240:0)
[ 2.210388] mmcblk1: p1 p2 < p5 p6 p7 p8 p9 > p3 p4
[ 2.274069] hub 1-1:1.0: USB hub found
[ 2.275322] hub 1-1:1.0: 4 ports detected
[ 2.342317] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 2.355619] VFS: Mounted root (squashfs filesystem) readonly on device 179:8.
[ 2.359046] devtmpfs: mounted
[ 2.361561] Freeing unused kernel memory: 2624K
[ 2.378223] Run /sbin/init as init process
[ 2.379186] with arguments:
[ 2.379188] /sbin/init
[ 2.379189] with environment:
[ 2.379190] HOME=/
[ 2.379191] TERM=linux
[ 2.379192] cgroup_enable=memory
[ 2.381438] random: fast init done
[ 2.386206] hub 2-1:1.0: USB hub found
[ 2.388904] hub 2-1:1.0: 4 ports detected
[ 2.472524] systemd[1]: systemd 247 running in system mode. (+PAM -AUDIT -SELINUX -IMA +APPARMOR -SMACK -SYSVINIT -UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2.490776] systemd[1]: Detected architecture arm64.
[ 2.539271] systemd[1]: Set hostname to <homeassistant>.
[ 2.540352] systemd[1]: Installed transient /etc/machine-id file.
[ 2.654218] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
[ 2.656603] systemd[1]: Queued start job for default target Multi-User System.
[ 2.664063] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.685974] systemd[1]: Created slice system-ha\x2dcli.slice.
[ 2.706275] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.708995] systemd[1]: Created slice system-modprobe.slice.
[ 2.730266] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.733445] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 2.759068] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.778965] systemd[1]: Created slice system-systemd\x2dgrowfs.slice.
[ 2.798861] systemd[1]: Created slice User and Session Slice.
[ 2.814359] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.838284] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.858336] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.874243] systemd[1]: Reached target HassOS hardware targets.
[ 2.890225] systemd[1]: Reached target HassOS zram targets.
[ 2.906251] systemd[1]: Reached target Paths.
[ 2.922203] usb 1-1.3: new full-speed USB device number 4 using xhci-hcd
[ 2.922234] systemd[1]: Reached target Remote Encrypted Volumes.
[ 2.946225] systemd[1]: Reached target Remote File Systems.
[ 2.962225] systemd[1]: Reached target Slices.
[ 2.974968] systemd[1]: Listening on D-Bus System Message Bus Socket.
[ 2.996353] systemd[1]: Listening on Process Core Dump Socket.
[ 3.014454] systemd[1]: Listening on Journal Audit Socket.
[ 3.030365] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.046377] systemd[1]: Listening on Journal Socket.
[ 3.063178] systemd[1]: Listening on udev Control Socket.
[ 3.078345] systemd[1]: Listening on udev Kernel Socket.
[ 3.095807] systemd[1]: Mounting Huge Pages File System...
[ 3.115857] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.134558] systemd[1]: Condition check resulted in Kernel Debug File System being skipped.
[ 3.138308] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 3.148357] systemd[1]: Started D-Bus System Message Bus.
[ 3.154217] usb 1-1.4: new full-speed USB device number 5 using xhci-hcd
[ 3.178541] systemd[1]: Starting Home Assistant OS Agent...
[ 3.198823] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.224096] systemd[1]: Starting Load Kernel Module configfs...
[ 3.243719] systemd[1]: Starting Load Kernel Module drm...
[ 3.263687] systemd[1]: Starting Load Kernel Module fuse...
[ 3.268531] fuse: init (API version 7.32)
[ 3.284646] systemd[1]: Starting Journal Service...
[ 3.300041] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.319989] systemd[1]: Starting Wait Until Kernel Time Synchronized...
[ 3.339967] systemd[1]: Starting Coldplug All udev Devices...
[ 3.360058] systemd[1]: Starting Disk Manager...
[ 3.376206] systemd[1]: Starting HassOS ZRAM swap...
[ 3.396129] systemd[1]: Starting HassOS ZRAM tmp...
[ 3.400342] zram0: detected capacity change from 0 to 1000755200
[ 3.400680] zram2: detected capacity change from 0 to 16777216
[ 3.424175] systemd[1]: Starting HassOS ZRAM var...
[ 3.426935] zram1: detected capacity change from 0 to 33554432
[ 3.448569] systemd[1]: Started Journal Service.
[ 3.680210] audit: type=1334 audit(1629128223.912:2): prog-id=5 op=LOAD
[ 3.682045] audit: type=1334 audit(1629128223.912:3): prog-id=6 op=LOAD
[ 3.754748] usbcore: registered new interface driver ftdi_sio
[ 3.755714] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 3.763249] ftdi_sio 1-1.4:1.0: FTDI USB Serial Device converter detected
[ 3.770236] usb 1-1.4: Detected FT232RL
[ 3.775623] usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[ 3.888400] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[ 3.897045] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[ 3.906704] panfrost ffe40000.gpu: clock rate = 24000000
[ 3.908930] panfrost ffe40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
[ 3.910008] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[ 3.917549] panfrost ffe40000.gpu: [drm:panfrost_devfreq_init [panfrost]] Failed to register cooling device
[ 3.918933] meson-vrtc ff8000a8.rtc: registered as rtc1
[ 3.934004] meson8b-dwmac ff3f0000.ethernet: no reset control found
[ 3.938351] panfrost ffe40000.gpu: mali-g52 id 0x7212 major 0x0 minor 0x0 status 0x0
[ 3.946976] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 3.951870] panfrost ffe40000.gpu: features: 00000000,13de77ff, issues: 00000000,00000400
[ 3.961755] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
[ 3.967882] panfrost ffe40000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[ 3.971336] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[ 3.989004] panfrost ffe40000.gpu: shader_present=0x3 l2_present=0x1
[ 3.990708] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[ 4.003988] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[ 4.004433] [drm] Initialized panfrost 1.1.0 20180908 for ffe40000.gpu on minor 1
[ 4.010120] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[ 4.015948] generic_raw_uart: loading out-of-tree module taints kernel.
[ 4.019219] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device
[ 4.024847] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[ 4.034388] usbcore: registered new interface driver cdc_acm
[ 4.039276] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[ 4.045918] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 4.047850] usb 1-1.3: Found HB-RF-USB-2 with serial b405767d51c1e811aa2b6b713b0549ec at usb-xhci-hcd.4.auto-1.3
[ 4.050466] usbcore: registered new interface driver hb_rf_usb_2
[ 4.050990] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[ 4.086645] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 4.094799] libphy: stmmac: probed
[ 4.099018] libphy: mdio_mux: probed
[ 4.106251] Registered IR keymap rc-odroid
[ 4.134197] rc_core: Loaded IR protocol module ir-nec-decoder, but protocol nec still not available
[ 4.138999] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
[ 4.146933] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input1
[ 4.155016] meson-ir ff808000.ir: receiver initialized
[ 4.306644] libphy: mdio_mux: probed
[ 4.338812] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 4.411488] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.415518] ext4 filesystem being mounted at /mnt/overlay supports timestamps until 2038 (0x7fffffff)
[ 4.510278] Adding 977296k swap on /dev/zram0. Priority:-2 extents:1 across:977296k SS
[ 4.868553] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null)
[ 4.912898] Removed cp15_barrier emulation handler
[ 4.912911] Enabled cp15_barrier support
[ 5.036036] EXT4-fs (mmcblk1p4): resizing filesystem from 15087872 to 15087872 blocks
[ 5.456881] EXT4-fs (zram2): mounted filesystem without journal. Opts: nobarrier
[ 5.456897] ext4 filesystem being mounted at /tmp supports timestamps until 2038 (0x7fffffff)
[ 5.471608] EXT4-fs (zram1): mounted filesystem without journal. Opts: nobarrier
[ 5.471626] ext4 filesystem being mounted at /var supports timestamps until 2038 (0x7fffffff)
[ 5.707143] systemd-journald[201]: Received client request to flush runtime journal.
[ 5.922493] usb 1-1.1: USB disconnect, device number 3
[ 6.202223] usb 1-1.1: new full-speed USB device number 6 using xhci-hcd
[ 6.258692] audit: type=1400 audit(1629128226.488:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="de838cd8_raspberrymatic" pid=437 comm="apparmor_parser"
[ 6.269857] audit: type=1400 audit(1629128226.500:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="hassio-supervisor" pid=443 comm="apparmor_parser"
[ 6.269870] audit: type=1400 audit(1629128226.500:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="hassio-supervisor///usr/bin/gdbus" pid=443 comm="apparmor_parser"
[ 6.269875] audit: type=1400 audit(1629128226.500:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="hassio-supervisor///usr/bin/git" pid=443 comm="apparmor_parser"
[ 6.292789] audit: type=1334 audit(1629128226.524:6): prog-id=7 op=LOAD
[ 6.292840] audit: type=1334 audit(1629128226.524:7): prog-id=8 op=LOAD
[ 6.370468] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device
[ 6.419826] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.425386] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.461574] audit: type=1334 audit(1629128226.692:8): prog-id=9 op=LOAD
[ 6.461583] audit: type=1334 audit(1629128226.692:9): prog-id=10 op=LOAD
[ 6.682207] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=42)
[ 6.694179] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[ 6.694201] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[ 6.694379] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
[ 8.290539] random: crng init done
[ 8.290544] random: 7 urandom warning(s) missed due to ratelimiting
[ 9.529538] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 9.529557] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.213662] audit: type=1400 audit(1629128230.444:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=503 comm="apparmor_parser"
[ 10.570245] audit: type=1325 audit(1629128230.800:11): table=nat family=2 entries=5 op=xt_replace pid=530 subj==unconfined comm="iptables"
[ 10.592946] Initializing XFRM netlink socket
[ 10.829914] hassio: port 1(veth5dc978f) entered blocking state
[ 10.829921] hassio: port 1(veth5dc978f) entered disabled state
[ 10.831113] device veth5dc978f entered promiscuous mode
[ 10.833807] hassio: port 1(veth5dc978f) entered blocking state
[ 10.833814] hassio: port 1(veth5dc978f) entered forwarding state
[ 10.834145] hassio: port 1(veth5dc978f) entered disabled state
[ 11.068085] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 11.298279] kauditd_printk_skb: 52 callbacks suppressed
[ 11.298283] audit: type=1325 audit(1629128231.528:64): table=nat family=2 entries=0 op=xt_register pid=724 subj==unconfined comm="iptables"
[ 11.302520] audit: type=1325 audit(1629128231.536:65): table=filter family=2 entries=0 op=xt_register pid=725 subj==unconfined comm="iptables"
[ 11.307626] audit: type=1325 audit(1629128231.540:66): table=nat family=2 entries=5 op=xt_replace pid=728 subj==unconfined comm="iptables"
[ 11.309123] audit: type=1325 audit(1629128231.540:67): table=nat family=2 entries=7 op=xt_replace pid=729 subj==unconfined comm="iptables"
[ 11.311993] audit: type=1325 audit(1629128231.544:68): table=nat family=2 entries=8 op=xt_replace pid=731 subj==unconfined comm="iptables"
[ 11.313514] audit: type=1325 audit(1629128231.544:69): table=nat family=2 entries=10 op=xt_replace pid=732 subj==unconfined comm="iptables"
[ 11.316705] audit: type=1325 audit(1629128231.548:70): table=nat family=2 entries=11 op=xt_replace pid=733 subj==unconfined comm="iptables"
[ 11.318871] audit: type=1325 audit(1629128231.552:71): table=nat family=2 entries=12 op=xt_replace pid=734 subj==unconfined comm="iptables"
[ 11.320796] audit: type=1325 audit(1629128231.552:72): table=nat family=2 entries=13 op=xt_replace pid=735 subj==unconfined comm="iptables"
[ 11.322775] audit: type=1325 audit(1629128231.556:73): table=nat family=2 entries=14 op=xt_replace pid=736 subj==unconfined comm="iptables"
[ 11.354972] eth0: renamed from veth336205f
[ 11.378786] IPv6: ADDRCONF(NETDEV_CHANGE): veth5dc978f: link becomes ready
[ 11.378828] hassio: port 1(veth5dc978f) entered blocking state
[ 11.378832] hassio: port 1(veth5dc978f) entered forwarding state
[ 11.378886] IPv6: ADDRCONF(NETDEV_CHANGE): hassio: link becomes ready
[ 33.758208] USB_PWR_EN: disabling
[ 33.758213] TF_IO: disabling
[ 36.694367] audit: type=1334 audit(1629128255.865:74): prog-id=10 op=UNLOAD
[ 36.694395] audit: type=1334 audit(1629128255.865:75): prog-id=9 op=UNLOAD
[ 36.857778] docker0: port 1(veth7b44534) entered blocking state
[ 36.857785] docker0: port 1(veth7b44534) entered disabled state
[ 36.857921] device veth7b44534 entered promiscuous mode
[ 36.857963] audit: type=1700 audit(1629128256.025:76): dev=veth7b44534 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[ 36.895485] hassio: port 2(veth4da5a14) entered blocking state
[ 36.895498] hassio: port 2(veth4da5a14) entered disabled state
[ 36.895719] device veth4da5a14 entered promiscuous mode
[ 36.895782] audit: type=1700 audit(1629128256.065:77): dev=veth4da5a14 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[ 36.896043] hassio: port 2(veth4da5a14) entered blocking state
[ 36.896053] hassio: port 2(veth4da5a14) entered forwarding state
[ 37.190798] eth0: renamed from veth767c19e
[ 37.218715] hassio: port 2(veth4da5a14) entered disabled state
[ 37.218778] IPv6: ADDRCONF(NETDEV_CHANGE): veth7b44534: link becomes ready
[ 37.218820] docker0: port 1(veth7b44534) entered blocking state
[ 37.218822] docker0: port 1(veth7b44534) entered forwarding state
[ 37.218867] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[ 37.273511] audit: type=1325 audit(1629128256.441:78): table=nat family=2 entries=0 op=xt_register pid=1097 subj==unconfined comm="iptables"
[ 37.279661] audit: type=1325 audit(1629128256.449:79): table=filter family=2 entries=0 op=xt_register pid=1098 subj==unconfined comm="iptables"
[ 37.283720] audit: type=1325 audit(1629128256.453:80): table=nat family=2 entries=5 op=xt_replace pid=1101 subj==unconfined comm="iptables"
[ 37.285120] audit: type=1325 audit(1629128256.453:81): table=nat family=2 entries=7 op=xt_replace pid=1102 subj==unconfined comm="iptables"
[ 37.287807] audit: type=1325 audit(1629128256.457:82): table=nat family=2 entries=8 op=xt_replace pid=1104 subj==unconfined comm="iptables"
[ 37.289221] audit: type=1325 audit(1629128256.457:83): table=nat family=2 entries=10 op=xt_replace pid=1105 subj==unconfined comm="iptables"
[ 37.336102] eth1: renamed from veth393cebb
[ 37.355770] IPv6: ADDRCONF(NETDEV_CHANGE): veth4da5a14: link becomes ready
[ 37.355867] hassio: port 2(veth4da5a14) entered blocking state
[ 37.355871] hassio: port 2(veth4da5a14) entered forwarding state
[ 41.305029] hassio: port 3(vethd856af2) entered blocking state
[ 41.305037] hassio: port 3(vethd856af2) entered disabled state
[ 41.305443] device vethd856af2 entered promiscuous mode
[ 41.662875] eth0: renamed from vethfb3061c
[ 41.694702] IPv6: ADDRCONF(NETDEV_CHANGE): vethd856af2: link becomes ready
[ 41.694754] hassio: port 3(vethd856af2) entered blocking state
[ 41.694757] hassio: port 3(vethd856af2) entered forwarding state
[ 42.000260] hassio: port 4(veth7cf0b25) entered blocking state
[ 42.000269] hassio: port 4(veth7cf0b25) entered disabled state
[ 42.000400] device veth7cf0b25 entered promiscuous mode
[ 42.000555] hassio: port 4(veth7cf0b25) entered blocking state
[ 42.000559] hassio: port 4(veth7cf0b25) entered forwarding state
[ 42.002286] kauditd_printk_skb: 23 callbacks suppressed
[ 42.002290] audit: type=1700 audit(1629128261.169:105): dev=veth7cf0b25 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[ 42.334290] hassio: port 4(veth7cf0b25) entered disabled state
[ 42.335584] audit: type=1325 audit(1629128261.505:106): table=nat family=2 entries=0 op=xt_register pid=2076 subj==unconfined comm="iptables"
[ 42.341490] audit: type=1325 audit(1629128261.509:107): table=filter family=2 entries=0 op=xt_register pid=2077 subj==unconfined comm="iptables"
[ 42.346123] audit: type=1325 audit(1629128261.513:108): table=nat family=2 entries=5 op=xt_replace pid=2080 subj==unconfined comm="iptables"
[ 42.347953] audit: type=1325 audit(1629128261.517:109): table=nat family=2 entries=7 op=xt_replace pid=2081 subj==unconfined comm="iptables"
[ 42.351001] audit: type=1325 audit(1629128261.521:110): table=nat family=2 entries=8 op=xt_replace pid=2083 subj==unconfined comm="iptables"
[ 42.352635] audit: type=1325 audit(1629128261.521:111): table=nat family=2 entries=10 op=xt_replace pid=2084 subj==unconfined comm="iptables"
[ 42.354818] audit: type=1325 audit(1629128261.525:112): table=nat family=2 entries=11 op=xt_replace pid=2085 subj==unconfined comm="iptables"
[ 42.356963] audit: type=1325 audit(1629128261.525:113): table=nat family=2 entries=12 op=xt_replace pid=2086 subj==unconfined comm="iptables"
[ 42.359073] audit: type=1325 audit(1629128261.529:114): table=nat family=2 entries=13 op=xt_replace pid=2087 subj==unconfined comm="iptables"
[ 42.395615] eth0: renamed from veth1adaf67
[ 42.423142] IPv6: ADDRCONF(NETDEV_CHANGE): veth7cf0b25: link becomes ready
[ 42.423249] hassio: port 4(veth7cf0b25) entered blocking state
[ 42.423255] hassio: port 4(veth7cf0b25) entered forwarding state
[ 42.668759] hassio: port 5(veth98a2535) entered blocking state
[ 42.668771] hassio: port 5(veth98a2535) entered disabled state
[ 42.668998] device veth98a2535 entered promiscuous mode
[ 42.669421] hassio: port 5(veth98a2535) entered blocking state
[ 42.669432] hassio: port 5(veth98a2535) entered forwarding state
[ 43.055292] eth0: renamed from vethc585592
[ 43.079294] IPv6: ADDRCONF(NETDEV_CHANGE): veth98a2535: link becomes ready
[ 49.970893] hassio: port 6(veth3af2dfd) entered blocking state
[ 49.970901] hassio: port 6(veth3af2dfd) entered disabled state
[ 49.971042] device veth3af2dfd entered promiscuous mode
[ 49.971137] kauditd_printk_skb: 12 callbacks suppressed
[ 49.971142] audit: type=1700 audit(1629128269.141:127): dev=veth3af2dfd prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[ 49.993208] audit: type=1325 audit(1629128269.161:128): table=nat family=2 entries=15 op=xt_replace pid=3177 subj==unconfined comm="iptables"
[ 49.997547] audit: type=1325 audit(1629128269.165:129): table=filter family=2 entries=30 op=xt_replace pid=3179 subj==unconfined comm="iptables"
[ 50.001566] audit: type=1325 audit(1629128269.169:130): table=nat family=2 entries=16 op=xt_replace pid=3181 subj==unconfined comm="iptables"
[ 50.012446] audit: type=1325 audit(1629128269.181:131): table=nat family=2 entries=17 op=xt_replace pid=3199 subj==unconfined comm="iptables"
[ 50.016230] audit: type=1325 audit(1629128269.185:132): table=filter family=2 entries=31 op=xt_replace pid=3201 subj==unconfined comm="iptables"
[ 50.020466] audit: type=1325 audit(1629128269.189:133): table=nat family=2 entries=18 op=xt_replace pid=3203 subj==unconfined comm="iptables"
[ 50.031276] audit: type=1325 audit(1629128269.201:134): table=nat family=2 entries=19 op=xt_replace pid=3221 subj==unconfined comm="iptables"
[ 50.035588] audit: type=1325 audit(1629128269.205:135): table=filter family=2 entries=32 op=xt_replace pid=3223 subj==unconfined comm="iptables"
[ 50.039441] audit: type=1325 audit(1629128269.209:136): table=nat family=2 entries=20 op=xt_replace pid=3225 subj==unconfined comm="iptables"
[ 50.374891] eth0: renamed from veth6e6d555
[ 50.398714] IPv6: ADDRCONF(NETDEV_CHANGE): veth3af2dfd: link becomes ready
[ 50.398769] hassio: port 6(veth3af2dfd) entered blocking state
[ 50.398773] hassio: port 6(veth3af2dfd) entered forwarding state
[ 55.632398] hassio: port 7(veth430faea) entered blocking state
[ 55.632406] hassio: port 7(veth430faea) entered disabled state
[ 55.632528] device veth430faea entered promiscuous mode
[ 55.632577] kauditd_printk_skb: 13 callbacks suppressed
[ 55.632579] audit: type=1700 audit(1629128274.801:150): dev=veth430faea prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[ 55.653359] audit: type=1325 audit(1629128274.821:151): table=nat family=2 entries=23 op=xt_replace pid=3705 subj==unconfined comm="iptables"
[ 55.657369] audit: type=1325 audit(1629128274.825:152): table=filter family=2 entries=34 op=xt_replace pid=3707 subj==unconfined comm="iptables"
[ 55.661098] audit: type=1325 audit(1629128274.829:153): table=nat family=2 entries=24 op=xt_replace pid=3709 subj==unconfined comm="iptables"
[ 55.672425] audit: type=1325 audit(1629128274.841:154): table=nat family=2 entries=25 op=xt_replace pid=3727 subj==unconfined comm="iptables"
[ 55.676597] audit: type=1325 audit(1629128274.845:155): table=filter family=2 entries=35 op=xt_replace pid=3729 subj==unconfined comm="iptables"
[ 55.680345] audit: type=1325 audit(1629128274.849:156): table=nat family=2 entries=26 op=xt_replace pid=3731 subj==unconfined comm="iptables"
[ 55.691932] audit: type=1325 audit(1629128274.861:157): table=nat family=2 entries=27 op=xt_replace pid=3748 subj==unconfined comm="iptables"
[ 55.695913] audit: type=1325 audit(1629128274.865:158): table=filter family=2 entries=36 op=xt_replace pid=3750 subj==unconfined comm="iptables"
[ 55.699620] audit: type=1325 audit(1629128274.869:159): table=nat family=2 entries=28 op=xt_replace pid=3752 subj==unconfined comm="iptables"
[ 56.058761] eth0: renamed from vethd388d86
[ 56.102657] IPv6: ADDRCONF(NETDEV_CHANGE): veth430faea: link becomes ready
[ 56.102714] hassio: port 7(veth430faea) entered blocking state
[ 56.102717] hassio: port 7(veth430faea) entered forwarding state
[ 56.396806] hassio: port 8(vethe509a1c) entered blocking state
[ 56.396815] hassio: port 8(vethe509a1c) entered disabled state
[ 56.397015] device vethe509a1c entered promiscuous mode
[ 56.397551] hassio: port 8(vethe509a1c) entered blocking state
[ 56.397558] hassio: port 8(vethe509a1c) entered forwarding state
[ 56.634409] hassio: port 8(vethe509a1c) entered disabled state
[ 57.032059] eth0: renamed from vethec3885d
[ 57.055862] IPv6: ADDRCONF(NETDEV_CHANGE): vethe509a1c: link becomes ready
[ 57.056006] hassio: port 8(vethe509a1c) entered blocking state
[ 57.056011] hassio: port 8(vethe509a1c) entered forwarding state
[ 57.396246] hassio: port 9(vethc19d62d) entered blocking state
[ 57.396254] hassio: port 9(vethc19d62d) entered disabled state
[ 57.396716] device vethc19d62d entered promiscuous mode
[ 57.397573] hassio: port 9(vethc19d62d) entered blocking state
[ 57.397582] hassio: port 9(vethc19d62d) entered forwarding state
[ 57.638450] hassio: port 9(vethc19d62d) entered disabled state
[ 57.943084] eth0: renamed from veth5f1ef84
[ 57.975824] IPv6: ADDRCONF(NETDEV_CHANGE): vethc19d62d: link becomes ready
[ 57.975920] hassio: port 9(vethc19d62d) entered blocking state
[ 57.975923] hassio: port 9(vethc19d62d) entered forwarding state
[ 58.377021] hassio: port 10(vethec366cd) entered blocking state
[ 58.377033] hassio: port 10(vethec366cd) entered disabled state
[ 58.377280] device vethec366cd entered promiscuous mode
[ 58.377826] hassio: port 10(vethec366cd) entered blocking state
[ 58.377842] hassio: port 10(vethec366cd) entered forwarding state
[ 58.654755] hassio: port 10(vethec366cd) entered disabled state
[ 58.999307] eth0: renamed from vethf9d0854
[ 59.040126] IPv6: ADDRCONF(NETDEV_CHANGE): vethec366cd: link becomes ready
[ 59.040268] hassio: port 10(vethec366cd) entered blocking state
[ 59.040276] hassio: port 10(vethec366cd) entered forwarding state
[ 59.548088] raw-uart raw-uart: Reset radio module
[ 70.350246] kauditd_printk_skb: 90 callbacks suppressed
[ 70.350252] audit: type=1334 audit(1629128289.521:250): prog-id=12 op=UNLOAD
[ 70.350269] audit: type=1334 audit(1629128289.521:251): prog-id=11 op=UNLOAD
[ 70.354213] audit: type=1334 audit(1629128289.525:252): prog-id=14 op=UNLOAD
[ 70.354225] audit: type=1334 audit(1629128289.525:253): prog-id=13 op=UNLOAD
[ 73.955848] TCP: request_sock_TCP: Possible SYN flooding on port 8701. Dropping request. Check SNMP counters.
[ 76.069830] eq3loop: created slave mmd_hmip
[ 76.074405] eq3loop: created slave mmd_bidcos
[ 78.116812] eq3loop: eq3loop_open_slave() mmd_bidcos
[ 87.341990] eq3loop: eq3loop_open_slave() mmd_hmip
[ 87.342111] eq3loop: eq3loop_close_slave() mmd_hmip
[ 87.344677] eq3loop: eq3loop_open_slave() mmd_hmip
[ 87.344776] eq3loop: eq3loop_close_slave() mmd_hmip
[ 87.345391] eq3loop: eq3loop_open_slave() mmd_hmip
[ 87.345480] eq3loop: eq3loop_close_slave() mmd_hmip
[ 87.352219] eq3loop: eq3loop_open_slave() mmd_hmip
[ 88.800317] hassio: port 11(veth8e97b48) entered blocking state
[ 88.800327] hassio: port 11(veth8e97b48) entered disabled state
[ 88.800617] device veth8e97b48 entered promiscuous mode
[ 88.800747] audit: type=1700 audit(1629128307.969:254): dev=veth8e97b48 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295
[ 89.286780] audit: type=1325 audit(1629128308.457:255): table=nat family=2 entries=0 op=xt_register pid=8556 subj==unconfined comm="iptables"
[ 89.294628] audit: type=1325 audit(1629128308.465:256): table=filter family=2 entries=0 op=xt_register pid=8557 subj==unconfined comm="iptables"
[ 89.317142] audit: type=1325 audit(1629128308.485:257): table=nat family=2 entries=5 op=xt_replace pid=8560 subj==unconfined comm="iptables"
[ 89.320664] audit: type=1325 audit(1629128308.489:258): table=nat family=2 entries=7 op=xt_replace pid=8561 subj==unconfined comm="iptables"
[ 89.327649] audit: type=1325 audit(1629128308.497:259): table=nat family=2 entries=8 op=xt_replace pid=8563 subj==unconfined comm="iptables"
[ 89.331663] audit: type=1325 audit(1629128308.501:260): table=nat family=2 entries=10 op=xt_replace pid=8564 subj==unconfined comm="iptables"
[ 89.338035] audit: type=1325 audit(1629128308.509:261): table=nat family=2 entries=11 op=xt_replace pid=8565 subj==unconfined comm="iptables"
[ 89.344882] audit: type=1325 audit(1629128308.513:262): table=nat family=2 entries=12 op=xt_replace pid=8566 subj==unconfined comm="iptables"
[ 89.355180] audit: type=1325 audit(1629128308.525:263): table=nat family=2 entries=13 op=xt_replace pid=8567 subj==unconfined comm="iptables"
[ 89.406490] eth0: renamed from vetha37fafc
[ 89.435313] IPv6: ADDRCONF(NETDEV_CHANGE): veth8e97b48: link becomes ready
[ 89.435433] hassio: port 11(veth8e97b48) entered blocking state
[ 89.435436] hassio: port 11(veth8e97b48) entered forwarding state
[ 94.658481] kauditd_printk_skb: 1 callbacks suppressed
[ 94.658486] audit: type=1334 audit(1629128313.829:265): prog-id=17 op=LOAD
[ 94.658835] audit: type=1334 audit(1629128313.829:266): prog-id=18 op=LOAD
[ 94.964567] audit: type=1334 audit(1629128314.133:267): prog-id=19 op=LOAD
[ 94.965671] audit: type=1334 audit(1629128314.133:268): prog-id=20 op=LOAD
[ 124.961594] audit: type=1334 audit(1629128344.133:269): prog-id=18 op=UNLOAD
[ 124.961607] audit: type=1334 audit(1629128344.133:270): prog-id=17 op=UNLOAD
[ 125.262009] audit: type=1334 audit(1629128344.433:271): prog-id=20 op=UNLOAD
[ 125.262021] audit: type=1334 audit(1629128344.433:272): prog-id=19 op=UNLOAD
[ 7694.241580] audit: type=1334 audit(1629135913.763:273): prog-id=21 op=LOAD
[ 7694.242761] audit: type=1334 audit(1629135913.763:274): prog-id=22 op=LOAD
[ 7694.439556] audit: type=1334 audit(1629135913.959:275): prog-id=23 op=LOAD
[ 7694.439584] audit: type=1334 audit(1629135913.959:276): prog-id=24 op=LOAD
[ 7724.486556] audit: type=1334 audit(1629135944.009:277): prog-id=22 op=UNLOAD
[ 7724.486577] audit: type=1334 audit(1629135944.009:278): prog-id=21 op=UNLOAD
[ 7724.658569] audit: type=1334 audit(1629135944.181:279): prog-id=24 op=UNLOAD
[ 7724.658586] audit: type=1334 audit(1629135944.181:280): prog-id=23 op=UNLOAD
Gruß Florian

Antworten

Zurück zu „Hardwareentwicklung und Selbstbau von Aktoren und Sensoren“