Hallo,
ich versuche gerade, die Version 1.2.9 initial mit VSCode/PlatformIO/esp-idf4.2 per USB zu flashen. Kompilieren und Flashen funktioniert soweit, aber im Serial-Log kommt wiederholt nur folgendes:
Code: Alles auswählen
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:QIO, clock div:2
load:0x3fff0030,len:7160
load:0x83a6a739,len:614646282
1162 mmu set 00010000, pos 00010000
1162 mmu set 00020000, pos 00020000
1162 mmu set 00030000, pos 00030000
1162 mmu set 00040000, pos 00040000
1162 mmu set 00050000, pos 00050000
1162 mmu set 00060000, pos 00060000
1162 mmu set 00070000, pos 00070000
1162 mmu set 00080000, pos 00080000
1162 mmu set 00090000, pos 00090000
1162 mmu set 000a0000, pos 000a0000
1162 mmu set 000b0000, pos 000b0000
1162 mmu set 000c0000, pos 000c0000
1162 mmu set 000d0000, pos 000d0000
1162 mmu set 000e0000, pos 000e0000
ets Jun 8 2016 00:22:57
Code: Alles auswählen
Ausgabe des Flash-Vorgangs ist:
>"C:\Users\mike\.platformio\penv\Scripts\python.exe" "C:\Users\mike\.platformio\packages\tool-esptoolpy\esptool.py" --chip esp32 --port "COM14" --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode qio --flash_freq 40m --flash_size detect 0x1000 C:\Users\mike\vscode\HB-RF-ETH\.pio\build\hb-rf-eth\bootloader.bin 0x8000 C:\Users\mike\vscode\HB-RF-ETH\.pio\build\hb-rf-eth\partitions.bin 0xd000 C:\Users\mike\vscode\HB-RF-ETH\.pio\build\hb-rf-eth\ota_data_initial.bin 0x10000 .pio\build\hb-rf-eth\firmware_1_2_9.bin
esptool.py v3.1
Serial port COM14
Connecting.....
Chip is ESP32-D0WD (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: 8c:aa:b5:xx:xx:xx
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 921600
Changed.
Configuring flash size...
Auto-detected Flash size: 4MB
Flash will be erased from 0x00001000 to 0x00007fff...
Flash will be erased from 0x00008000 to 0x00008fff...
Flash will be erased from 0x0000d000 to 0x0000efff...
Flash will be erased from 0x00010000 to 0x000e2fff...
Compressed 25232 bytes to 15406...
Wrote 25232 bytes (15406 compressed) at 0x00001000 in 0.6 seconds (effective 336.8 kbit/s)...
Hash of data verified.
Compressed 3072 bytes to 143...
Wrote 3072 bytes (143 compressed) at 0x00008000 in 0.1 seconds (effective 389.5 kbit/s)...
Hash of data verified.
Compressed 8192 bytes to 31...
Wrote 8192 bytes (31 compressed) at 0x0000d000 in 0.1 seconds (effective 533.3 kbit/s)...
Hash of data verified.
Compressed 864160 bytes to 590356...
Wrote 864160 bytes (590356 compressed) at 0x00010000 in 8.3 seconds (effective 836.8 kbit/s)...
Hash of data verified.
Leaving...
Hard resetting via RTS pin...
Mir fiel auf, dass das erstellte firmware_1_2_9.bin um ca. 100kb größer ist als das aus dem Github-Release.
Hat jemand evtl. eine Idee, wo das Problem liegen könnte?
Danke und viele Grüße
Michael