Vorstellung Leiterplatte für ePaper Displays (z.B. 7,5") inkl. Driver

[kafisc]

Danke für die Ausführungen. Ich hatte in der Tat auf den Button "Raw" gedrückt und dann auf speichern.

[kafisc]

Hi zusammen,

ich bin nun schon ein paar Schritte weiter. Das Display sowie das CC1101 sind angekommen.
Nachdem ich das Display angeschlossen habe, zeigt sich nach dem Start zum Glück der Startbildschirm. Sehr gut!
Allerdings scheitere ich gerade noch am Anlernen an die Homematic.

Die Serielle Ausgabe sieht so aus:

Code: Alles auswählen

18:09:02.184 -> AskSin++ v5.0.0 (May 29 2021 15:10:33)
18:09:02.184 -> Address Space: 32 - 940
18:09:02.184 -> CC init1
18:09:02.184 -> CC Version: 14
18:09:02.268 ->  - ready
18:09:02.268 -> CONFIG LIST0 CHANGED
18:09:02.268 -> lowBat          : 24
18:09:02.268 -> critBat         : 22
18:09:02.268 -> ledMode         : 1
18:09:02.268 -> displayInverting: 0
18:09:02.268 -> RefreshWaitTime : 50
18:09:02.268 -> PowerUpMode     : 0
18:09:02.268 -> PowerUpKey      : 0
18:09:02.268 -> ShowGrid        : 0
18:09:02.268 -> wait:1
18:09:02.268 -> 01 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
18:09:02.268 -> 02 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
18:09:02.268 -> 03 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
18:09:02.364 -> 04 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
18:09:02.364 -> 05 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
18:09:02.415 -> 06 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
18:09:02.415 -> 07 - TEXT1 =    ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT2 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT3 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT4 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
18:09:02.462 -> 08 - TEXT1 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT2 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT3 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT4 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
18:09:02.462 -> ID: F34701  Serial: JPDISEP750
18:09:02.462 -> 08 debounce
18:09:02.462 -> wait:0
18:09:12.455 -> Busy Timeout!
18:09:12.455 -> _wakeUp Power On : 10001272
18:10:24.196 -> Busy Timeout!
18:10:24.196 -> drawPaged : 10000408
18:10:34.182 -> Busy Timeout!
18:10:34.182 -> _sleep Power Off : 10001176
18:10:34.182 -> 08 released
18:10:34.717 -> <- 0B 02 B2 40 F34701 FFFFFF 08 00  - 93112
18:10:34.717 -> -> 16 CB 84 53 F30101 584CC3 00 41 00 D8 42 00 00 43 00 00 44 00 00  - 93122
18:10:35.595 -> waitAck: 00
18:10:36.100 -> <- 0B 02 B2 40 F34701 FFFFFF 08 00  - 94515
18:10:36.969 -> waitAck: 00
18:10:36.969 -> 08
18:10:37.009 -> <- 0E 04 86 10 F34701 000000 06 09 00 00 48  - 95414
18:11:23.097 ->  debounce
18:11:23.178 ->  pressed
18:11:23.317 ->  released
18:11:23.396 -> <- 1A 05 84 00 F34701 000000 10 F3 47 4A 50 44 49 53 45 50 37 35 30 40 09 01 01  - 95490
18:11:23.396 -> 08 debounce
18:11:23.396 -> 
18:11:23.396 -> 08 pressed
18:11:23.860 -> 08 released
18:11:24.398 -> <- 0B 08 B2 40 F34701 FFFFFF 08 01  - 96520
18:11:24.563 -> -> 10 01 B0 01 584CC3 F34701 00 05 00 00 00 00 00  - 96686
18:11:25.183 -> -> 10 01 B0 01 584CC3 F34701 00 05 00 00 00 00 00  - 97323
18:11:25.268 -> waitAck: 00
18:11:25.809 -> <- 0B 08 B2 40 F34701 FFFFFF 08 01  - 97929
18:11:25.843 -> -> 10 01 B0 01 584CC3 F34701 00 05 00 00 00 00 00  - 97966
18:11:26.657 -> waitAck: 00
18:11:26.657 -> 08
18:11:31.347 -> ignore 14 11 84 53 F31200 000000 00 41 00 AC 29 42 64 43 64 44 64  - 103489

Code: Alles auswählen

Das Gegenstück in der Homematic:
May 29 18:11:26 homematic-raspi user.info multimac: No ACK received after 3 repetitions: #01[BiDi|WOR|Ren] 584CC3->F34701 Configuration: 00 05 00 00 00 00 00
May 29 18:11:26 homematic-raspi user.warn rfd: Peering with JPDISEP750 failed

Ich habe dann mal Sicherheitshalber den Frequenzsketch durchlaufen lassen:

Code: Alles auswählen

Freq Test:
18:28:29.950 -> AskSin++ v5.0.0 (May 29 2021 18:27:37)
18:28:29.950 -> CC init1
18:28:29.950 -> CC Version: 14
18:28:29.950 ->  - ready
18:28:29.950 -> Active ping is NOT enabled, looking for any telegram
18:28:29.997 -> Start searching ...
18:28:29.997 -> Freq 0x21656A 868.300 MHz:   0
18:29:29.778 -> Freq 0x2165BA 868.332 MHz: 584CC3.  1 / -53dBm
18:29:29.919 -> Search for upper bound
18:29:29.919 -> Freq 0x2165CA 868.338 MHz: 6CFA64.  1 / -69dBm
18:29:30.014 -> Freq 0x2165DA 868.344 MHz: 29D50A.  1 / -68dBm
18:29:32.971 -> Freq 0x2165EA 868.351 MHz: 29D4C8.  1 / -58dBm
18:29:35.272 -> Freq 0x2165FA 868.357 MHz: 584CC3.  1 / -53dBm
18:29:35.366 -> Freq 0x21660A 868.363 MHz: 6CFA64.  1 / -70dBm
18:29:35.930 -> Freq 0x21661A 868.370 MHz: 584CC3.  1 / -53dBm
18:29:36.071 -> Freq 0x21662A 868.376 MHz: 29D50A.  1 / -72dBm
18:29:37.903 -> Freq 0x21663A 868.382 MHz: 29D50A.  1 / -70dBm
18:29:41.332 -> Freq 0x21664A 868.389 MHz: 3B001B.  1 / -65dBm
18:29:44.058 -> Freq 0x21665A 868.395 MHz: 3B055B.  1 / -61dBm
18:30:12.820 -> Freq 0x21666A 868.401 MHz:   0
18:31:12.595 -> Search for lower bound
18:31:12.595 -> Freq 0x2165AA 868.325 MHz: 1B4C2D.  1 / -69dBm
18:31:29.344 -> Freq 0x21659A 868.319 MHz: 584CC3.  1 / -52dBm
18:31:29.455 -> Freq 0x21658A 868.313 MHz: 33A3D4.  1 / -65dBm
18:31:30.265 -> Freq 0x21657A 868.306 MHz: 584CC3.  1 / -53dBm
18:31:30.349 -> Freq 0x21656A 868.300 MHz: 33A3D4.  1 / -66dBm
18:31:42.782 -> Freq 0x21655A 868.294 MHz:   0
18:32:42.575 -> 
18:32:42.575 -> Done: 0x21656A - 0x21665A
18:32:42.575 -> Calculated Freq: 0x2165E2 868.347 MHz
18:32:42.611 -> Store into config area: 65E2...stored!
18:32:42.682 -> Going to sleep...

Im Anschluss hat das Anlernen leider noch immer nicht funktioniert.
Ich habe daraufhin den CC1101 ausgetauscht, aber das Problem besteht leider weiterhin.
Ich habe dann anhand der Schematic nachgemessen, ob alle Pins des CC1101 auch an den Pins des ATMEGA 1284P-AU, sowie an +/- ankommen. Auch hier konnte ich keine Ausfälligkeit feststellen.

Hab Ihr zufällig noch eine Idee nach was genau ich schauen könnte?

Vielen Dank im Voraus
kafisc

[jp112sdl]

Das Display läuft, trotz

Code: Alles auswählen

18:09:02.462 -> wait:0
18:09:12.455 -> Busy Timeout!
18:09:12.455 -> _wakeUp Power On : 10001272
18:10:24.196 -> Busy Timeout!
18:10:24.196 -> drawPaged : 10000408
18:10:34.182 -> Busy Timeout!
18:10:34.182 -> _sleep Power Off : 10001176

?

[kafisc]

Das Display läuft, trotz

Code: Alles auswählen

18:09:02.462 -> wait:0
18:09:12.455 -> Busy Timeout!
18:09:12.455 -> _wakeUp Power On : 10001272
18:10:24.196 -> Busy Timeout!
18:10:24.196 -> drawPaged : 10000408
18:10:34.182 -> Busy Timeout!
18:10:34.182 -> _sleep Power Off : 10001176

?

Sorry, hätte ich erwähnen sollen: Das Display war abgesteckt, deswegen die Busy Timeout FM.

[jp112sdl]

Sorry, hätte ich erwähnen sollen: Das Display war abgesteckt, deswegen die Busy Timeout FM.

Ja... sonst sucht man unnötig nach Fehlern, die gar keine sind.

Ich habe dann mal Sicherheitshalber den Frequenzsketch durchlaufen lassen:

Erscheint denn nun im seriellen Monitor auch was mit "Config Freq:..." ?
Also wird die ermittelte Frequenz auch beim Starten geladen?

[kafisc]

Ja, "Config Freq: 0x2165E2" taucht auf::

Code: Alles auswählen

19:36:39.730 -> AskSin++ v5.0.0 (May 29 2021 18:39:54)
19:36:39.730 -> Address Space: 32 - 940
19:36:39.730 -> CC init1
19:36:39.730 -> CC Version: 14
19:36:39.803 ->  - ready
19:36:39.803 -> Config Freq: 0x2165E2
19:36:39.803 -> CONFIG LIST0 CHANGED
19:36:39.803 -> lowBat          : 24
19:36:39.803 -> critBat         : 22
19:36:39.803 -> ledMode         : 1
19:36:39.803 -> displayInverting: 0
19:36:39.803 -> RefreshWaitTime : 50
19:36:39.803 -> PowerUpMode     : 0
19:36:39.803 -> PowerUpKey      : 0
19:36:39.803 -> ShowGrid        : 0
19:36:39.803 -> wait:1
19:36:39.803 -> 01 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:36:39.845 -> 02 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:36:39.845 -> 03 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:36:39.890 -> 04 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:36:39.923 -> 05 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:36:39.967 -> 06 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:36:39.967 -> 07 - TEXT1 =    ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT2 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT3 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT4 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
19:36:40.015 -> 08 - TEXT1 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT2 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT3 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT4 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
19:36:40.015 -> ID: F34701  Serial: JPDISEP750
19:36:40.015 -> 08 debounce
19:36:40.015 -> wait:0
19:36:49.986 -> Busy Timeout!
19:36:49.986 -> _wakeUp Power On : 10000984

[jp112sdl]

Wegen der vielen "⸮"... mach mal bitte einen kompletten RESET.
Also Configtaster gedrückt halten, bis RESET im ser.Monitor ausgegeben wird.

Danach versuch noch mal anzulernen

[kafisc]

Wegen der vielen "⸮"... mach mal bitte einen kompletten RESET.
Also Configtaster gedrückt halten, bis RESET im ser.Monitor ausgegeben wird.

Danach versuch noch mal anzulernen

Reset wurde ausgeführt. Anlernen ist leider weiterhin nicht möglich und die "⸮"... sind leider auch nicht weg:

Code: Alles auswählen

19:44:32.208 -> AskSin++ v5.0.0 (May 29 2021 18:39:54)
19:44:32.208 -> Address Space: 32 - 940
19:44:32.208 -> CC init1
19:44:32.208 -> CC Version: 14
19:44:32.289 ->  - ready
19:44:32.289 -> Config Freq: 0x2165E2
19:44:32.289 -> CONFIG LIST0 CHANGED
19:44:32.289 -> lowBat          : 24
19:44:32.289 -> critBat         : 22
19:44:32.289 -> ledMode         : 1
19:44:32.289 -> displayInverting: 0
19:44:32.289 -> RefreshWaitTime : 50
19:44:32.289 -> PowerUpMode     : 0
19:44:32.289 -> PowerUpKey      : 0
19:44:32.289 -> ShowGrid        : 0
19:44:32.289 -> wait:1
19:44:32.289 -> 01 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:44:32.334 -> 02 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:44:32.373 -> 03 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:44:32.373 -> 04 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:44:32.422 -> 05 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:44:32.464 -> 06 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:44:32.464 -> 07 - TEXT1 =    ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT2 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT3 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT4 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
19:44:32.507 -> 08 - TEXT1 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT2 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT3 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT4 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
19:44:32.507 -> ID: F34701  Serial: JPDISEP750
19:44:32.507 -> 08 debounce
19:44:32.507 -> wait:0
19:44:42.505 -> Busy Timeout!
19:44:42.505 -> _wakeUp Power On : 10001040
19:45:44.731 -> drawPaged : 16
19:45:44.731 -> _sleep Power Off : 16
19:45:44.731 -> 08 released
19:45:45.301 -> <- 0B 02 B2 40 F34701 FFFFFF 08 00  - 73555
19:45:45.301 -> -> 0D 61 A6 10 27EF53 584CC3 06 01 86 00  - 73562
19:45:46.141 -> waitAck: 00
19:45:46.677 -> <- 0B 02 B2 40 F34701 FFFFFF 08 00  - 74954
19:45:47.525 -> waitAck: 00
19:45:47.525 -> 08
19:45:47.560 -> <- 0E 04 86 10 F34701 000000 06 09 00 00 3C  - 75851
19:45:47.910 ->  debounce
19:45:47.990 ->  pressed
19:45:51.193 ->  longpressed
19:45:51.193 -> 08 debounce
19:45:51.286 -> 08 pressed
19:45:51.427 -> 08 released
19:45:51.950 -> <- 0B 07 B2 40 F34701 FFFFFF 08 01  - 76500
19:45:52.803 -> waitAck: 00
19:45:53.379 -> <- 0B 07 B2 40 F34701 FFFFFF 08 01  - 77895
19:45:54.203 -> waitAck: 00
19:45:54.244 -> 08
19:45:54.244 ->  longpressed
19:45:54.244 -> RESET
19:45:54.486 -> AskSin++ v5.0.0 (May 29 2021 18:39:54)
19:45:54.528 -> Address Space: 32 - 940
19:45:54.528 -> 00000000
19:45:54.528 -> Init Storage: CAFE7681
19:45:58.588 -> AskSin++ v5.0.0 (May 29 2021 18:39:54)
19:45:58.588 -> Address Space: 32 - 940
19:45:58.588 -> CC init1
19:45:58.588 -> CC Version: 14
19:45:58.682 ->  - ready
19:45:58.682 -> Config Freq: 0x2165E2
19:45:58.682 -> CONFIG LIST0 CHANGED
19:45:58.682 -> lowBat          : 24
19:45:58.682 -> critBat         : 22
19:45:58.682 -> ledMode         : 1
19:45:58.682 -> displayInverting: 0
19:45:58.682 -> RefreshWaitTime : 50
19:45:58.682 -> PowerUpMode     : 0
19:45:58.682 -> PowerUpKey      : 0
19:45:58.682 -> ShowGrid        : 0
19:45:58.682 -> wait:1
19:45:58.682 -> 01 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:45:58.733 -> 02 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:45:58.733 -> 03 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:45:58.785 -> 04 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:45:58.785 -> 05 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:45:58.834 -> 06 - TEXT1 =                  - TEXT2 =                  - TEXT3 =                  - TEXT4 =                 
19:45:58.885 -> 07 - TEXT1 =    ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT2 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT3 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT4 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
19:45:58.885 -> 08 - TEXT1 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT2 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT3 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ - TEXT4 = ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
19:45:58.885 -> ID: F34701  Serial: JPDISEP750
19:45:58.885 -> 08 debounce
19:45:58.885 -> wait:0
19:45:58.933 -> _wakeUp Power On : 16
19:47:01.110 -> drawPaged : 16
19:47:01.110 -> _sleep Power Off : 16
19:47:01.110 -> 08 released
19:47:01.653 -> <- 0B 02 B2 40 F34701 FFFFFF 08 00  - 63537
19:47:01.698 -> -> 0F D7 86 10 43F8B1 000000 0A 38 CD 0E 00 40  - 63545
19:47:02.527 -> waitAck: 00
19:47:03.047 -> <- 0B 02 B2 40 F34701 FFFFFF 08 00  - 64937
19:47:03.392 -> -> 0D 05 A6 10 27EF97 584CC3 06 01 72 00  - 65288
19:47:03.550 -> -> 11 05 A0 02 584CC3 27EF97 04 8A 20 7B 1E 51 67 02  - 65425
19:47:03.666 -> -> 19 05 A0 03 27EF97 584CC3 EB 82 F2 EB 96 64 F9 2E 55 3C 7C 0C 9C 76 13 EE  - 65550
19:47:03.793 -> -> 0E 05 80 02 584CC3 27EF97 00 3D CB B6 A0  - 65673
19:47:03.956 -> waitAck: 00
19:47:03.956 -> 08
19:47:03.991 -> <- 0E 04 86 10 F34701 000000 06 09 00 00 2F  - 65871
19:47:15.120 ->  debounce
19:47:15.237 ->  pressed
19:47:15.426 ->  released
19:47:15.481 -> <- 1A 05 84 00 F34701 000000 10 F3 47 4A 50 44 49 53 45 50 37 35 30 40 09 01 01  - 65951
19:47:15.481 -> 08 debounce
19:47:15.481 -> 
19:47:15.526 -> 08 pressed
19:47:15.967 -> 08 released
19:47:16.498 -> <- 0B 08 B2 40 F34701 FFFFFF 08 01  - 66981
19:47:16.673 -> -> 10 01 B0 01 584CC3 F34701 00 05 00 00 00 00 00  - 67147
19:47:17.286 -> -> 10 01 B0 01 584CC3 F34701 00 05 00 00 00 00 00  - 67784
19:47:17.359 -> waitAck: 00
19:47:17.912 -> <- 0B 08 B2 40 F34701 FFFFFF 08 01  - 68390
19:47:17.912 -> -> 10 01 B0 01 584CC3 F34701 00 05 00 00 00 00 00  - 68427
19:47:18.761 -> waitAck: 00
19:47:18.761 -> 08
19:47:51.598 ->  debounce
19:47:51.707 ->  pressed
19:47:51.881 ->  released
19:47:51.932 -> <- 1A 0A 84 00 F34701 000000 10 F3 47 4A 50 44 49 53 45 50 37 35 30 40 09 01 01  - 86040
19:47:51.932 -> 08 debounce
19:47:51.932 -> 
19:47:51.966 -> 08 pressed
19:47:52.418 -> 08 released
19:47:52.949 -> <- 0B 0D B2 40 F34701 FFFFFF 08 02  - 87072
19:47:53.113 -> -> 10 01 B0 01 584CC3 F34701 00 05 00 00 00 00 00  - 87236
19:47:53.738 -> -> 10 01 B0 01 584CC3 F34701 00 05 00 00 00 00 00  - 87873
19:47:53.810 -> waitAck: 00
19:47:54.357 -> <- 0B 0D B2 40 F34701 FFFFFF 08 02  - 88481
19:47:54.405 -> -> 10 01 B0 01 584CC3 F34701 00 05 00 00 00 00 00  - 88516
19:47:55.201 -> waitAck: 00
19:47:55.201 -> 08

Und hier die Homematic Seite:
May 29 19:47:18 homematic-raspi user.info multimac: No ACK received after 3 repetitions: #01[BiDi|WOR|Ren] 584CC3->F34701 Configuration: 00 05 00 00 00 00 00
May 29 19:47:18 homematic-raspi user.warn rfd: Peering with JPDISEP750 failed
May 29 19:47:54 homematic-raspi user.info multimac: No ACK received after 3 repetitions: #01[BiDi|WOR|Ren] 584CC3->F34701 Configuration: 00 05 00 00 00 00 00
May 29 19:47:54 homematic-raspi user.warn rfd: Peering with JPDISEP750 failed

[jp112sdl]

Und das Display ist immer noch ab?

Hmm, so richtig hab ich sonst auch keine Idee grad.
Das Problem ist, dass beim Gerät keine Antwort von der CCU ankommt

[kafisc]

Und das Display ist immer noch ab?

Hmm, so richtig hab ich sonst auch keine Idee grad

Ja das Display ist noch immer ab. Gerade nochmals geprüft: Es macht leider keinen Unterschied, ob das Display dran ist oder nicht. Ich habe zur Sicherheit Raspberrymatic auch 1x neu aufgesetzt um hier ein Problem auszuschließen. Leider besteht auch da das Problem.