So,
Leider habe ich keine passenden Stecker die ich direkt auf das PCB bringe und muss über das Beadboard gehen.
Ich habe den Raspi mit RM 3.65.11.20221005 einfach durchbooten lassen und habe dann die Brücke entfernt (von PRG1 5-6)
Direkt nach dem durchbooten wird unter Hilfe nichts erkannt:
- b.png (6.87 KiB) 275 mal betrachtet
Code: Alles auswählen
root@homematic-raspi:~# detect_radio_module --debug /dev/ttyUSB0
20:08:50.583405 Sending HM frame: fd 00 03 fe 00 01 14 1e
20:08:50.594603 Received HM frame: fd 00 10 fe 00 05 01 48 4d 49 50 5f 54 52 58 5f 41 70 70 cc e0
20:08:50.597372 Sending HM frame: fd 00 03 fe 01 02 92 17
20:08:50.610781 Received HM frame: fd 00 04 fe 01 05 01 07 02
20:08:50.833927 Received HM frame: fd 00 0e fe 00 00 48 4d 49 50 5f 54 52 58 5f 42 6c f4 c2
20:08:50.835986 Sending HM frame: fd 00 03 fe 02 01 98 1d
20:08:50.850313 Received HM frame: fd 00 0f fe 02 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c ea c6
20:08:50.852130 Sending HM frame: fd 00 03 fe 03 03 9e 11
20:08:51.538021 Received HM frame: fd 00 04 fe 03 05 01 87 29
20:08:52.048427 Received HM frame: fd 00 0f fe 01 00 48 4d 49 50 5f 54 52 58 5f 41 70 70 0e 20
20:08:52.050655 Sending HM frame: fd 00 03 01 04 09 00 22
20:08:52.160352 Received HM frame: fd 00 05 01 04 04 01 01 16 28
20:08:52.162554 Sending HM frame: fd 00 03 01 05 02 06 18
20:08:52.256297 Received HM frame: fd 00 10 fe 02 00 44 75 61 6c 43 6f 50 72 6f 5f 41 70 70 b4 3c
20:08:52.272822 Received HM frame: fd 00 0d 01 05 04 01 04 04 22 01 00 18 01 4c 00 cd 4b
20:08:52.275087 Sending HM frame: fd 00 03 02 06 01 0c 2e
20:08:52.289027 Received HM frame: fd 00 07 02 06 06 01 18 d1 66 c1 93
20:08:52.291296 Sending HM frame: fd 00 03 fe 07 04 86 03
20:08:52.304153 Received HM frame: fd 00 10 fe 07 05 01 30 14 f7 11 a0 00 03 df 29 99 17 66 31 88
20:08:52.306821 Sending HM frame: fd 00 03 03 08 08 28 0c
20:08:52.320723 Received HM frame: fd 00 07 03 08 01 01 ff a5 70 24 79
HMIP-RFUSB DF29991766 3014F711A00003DF29991766 0xFFA570 0x18D166 4.4.34
Da das geklappt hat, so interpretier ich es, wollte ich nun den Schritt von Baxxy gehen:
Code: Alles auswählen
root@homematic-raspi:~# uname -m
armv6l
root@homematic-raspi:~# /opt/java/bin/java -Dos.arch=armv61 -Dgnu.io.rxtx.SerialPorts="/dev/ttyUSB0" -jar /opt/HmIP/hmip-copro-update.jar -p "/dev/ttyUSB0" -o -f "/firmware/HmIP-RFUSB/dualcopro_update_blhmip-4.4.18.eq3"
[INFO] Homematic IP coprocessor update tool V1.0.10
unsupported JNI version 0x00000002 required by /tmp/libNRJavaSerialv8_HF_root_0/libNRJavaSerialv8_HF.so
/tmp/libNRJavaSerialv8_root_0/libNRJavaSerialv8.so: /tmp/libNRJavaSerialv8_root_0/libNRJavaSerialv8.so: internal error
unsupported JNI version 0x00000002 required by /tmp/libNRJavaSerialv7_HF_root_0/libNRJavaSerialv7_HF.so
/tmp/libNRJavaSerialv7_root_0/libNRJavaSerialv7.so: /tmp/libNRJavaSerialv7_root_0/libNRJavaSerialv7.so: internal error
[DEBUG] Start bootloader ...
[DEBUG] Bootloader running
[DEBUG] Request bootloader version ...
[INFO] SGTIN = 3014F711A00003DF29991766
[INFO] Performing update with firmware file '/firmware/HmIP-RFUSB/dualcopro_update_blhmip-4.4.18.eq3' ...
[DEBUG] Start application ...
[DEBUG] Application 'HMIP_TRX_App' running
[DEBUG] Request application version ...
[DEBUG] Request application version ...
[INFO] Updating coprocessor from version 4.4.34 to version 4.4.18
[DEBUG] Start bootloader ...
[ERROR] Error in coprocessor communication: Failed to enter bootloader
java.lang.Exception: Failed to enter bootloader
at de.eq3.cbcs.tools.copro.update.hmip.TRXAdapterUpdater.updateTrxAdapter(TRXAdapterUpdater.java:151)
at de.eq3.cbcs.tools.copro.update.hmip.HmipCoproUpdater.main(HmipCoproUpdater.java:89)