Re: Anleitung zur Installation der CCU auf einem x86 system
Verfasst: 10.08.2018, 12:04
So, hab dann nochmal weiter probiert. CCU läuft jetzt mit dem LanGateway, Backup hab ich kopiert, jedoch werden jetzt alle Funk Geräte als neu angezeigt im Posteingang, das ist ja nicht der Sinn davon Hab es nach der Anleitung auf der zweiten Seite gemacht.
WiredGateway läuft noch nicht, deshalb hier nochmal die ps -Alf und die beiden configs:
ps -Alf:
rfd.conf:
Frag mich nicht warum er zweimal Interface 0 angelegt hat, konnte auch nicht wie du geschrieben hast, das LAN Gateway auf Interface 0 schreiben, das hat er nach nem reboot immer wieder überschrieben. IP Adresse hatte ich auch eingetragen, nach dem Backup ist sie jetzt wieder weg, dass ist klar. Werde ich nochmal eintragen.
hs485d:
Programme sind auch keine da, nur Direktverknüpfungen.
WiredGateway läuft noch nicht, deshalb hier nochmal die ps -Alf und die beiden configs:
ps -Alf:
Code: Alles auswählen
root@CCU:~# ps -Alf
F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY TIME CMD
4 S root 1 0 0 80 0 - 14202 ep_pol 11:49 ? 00:00:00 /sbin
4 S root 37 1 0 80 0 - 11524 ep_pol 11:49 ? 00:00:00 /lib/
4 S root 65 1 0 80 0 - 11606 ep_pol 11:49 ? 00:00:00 /lib/
4 S root 66 1 0 80 0 - 7410 hrtime 11:49 ? 00:00:00 /usr/
4 S root 68 1 0 80 0 - 62530 poll_s 11:49 ? 00:00:00 /usr/
4 S message+ 69 1 0 80 0 - 11280 ep_pol 11:49 ? 00:00:00 /usr/
1 S root 94 1 0 80 0 - 5118 poll_s 11:49 ? 00:00:00 /sbin
4 S root 112 1 0 80 0 - 3579 poll_s 11:49 pts/0 00:00:00 /sbin
4 S root 113 1 0 80 0 - 3579 poll_s 11:49 pts/0 00:00:00 /sbin
4 S root 114 1 0 80 0 - 17487 poll_s 11:49 ? 00:00:00 /usr/
4 S root 115 1 0 80 0 - 14800 ep_pol 11:49 ? 00:00:00 /usr/
0 S root 118 1 0 80 0 - 6606 hrtime 11:49 ? 00:00:00 /bin/
1 S root 150 1 0 80 0 - 12352 poll_s 11:49 ? 00:00:00 /bin/
1 S root 173 1 0 80 0 - 1123 wait 11:49 ? 00:00:00 /bin/
0 S root 174 173 0 80 0 - 4766 poll_s 11:49 ? 00:00:00 /bin/
0 S root 186 1 0 80 0 - 998622 futex_ 11:50 ? 00:00:07 /usr/
5 S root 248 1 0 80 0 - 900 poll_s 11:50 ? 00:00:00 /www/
4 R root 292 114 0 80 0 - 23794 - 11:50 ? 00:00:00 sshd:
4 S root 298 1 0 80 0 - 14107 ep_pol 11:50 ? 00:00:00 /lib/
5 S root 299 298 0 80 0 - 20583 sigtim 11:50 ? 00:00:00 (sd-p
4 S root 305 292 0 80 0 - 5258 wait 11:50 pts/2 00:00:00 -bash
0 R root 316 305 0 80 0 - 9578 - 11:50 pts/2 00:00:00 ps -A
Code: Alles auswählen
# This File was automatically generated
# TCP Port for XmlRpc connections
Listen Port = 2001
Log Destination = Syslog
Log Identifier = rfd
Persist Keys = 1
#PID File = /var/rfd.pid
#UDS File = /var/socket_rfd
Device Description Dir = /firmware/rftypes
Device Files Dir = /etc/config/rfd
Address File = /etc/config/ids
Key File = /etc/config/keys
Firmware Dir = /firmware
Replacemap File = /firmware/rftypes/replaceMap/rfReplaceMap.xml
[Interface 1]
Type = HMLGW2
Name =
Serial Number = KEQ1065791
Encryption Key = DLQ=xH7MtG
Improved Coprocessor Initialization = true
[Interface 0]
Type = CCU2
ComPortFile = /dev/mmd_bidcos
#AccessFile = /dev/null
#ResetFile = /dev/ccu2-ic200
[Interface 0]
Type = CCU2
ComPortFile = /dev/mmd_bidcos
hs485d:
Code: Alles auswählen
# This File was automatically generated
# TCP Port for XmlRpc connections
Listen Port = 2000
Log Destination = Syslog
Log Identifier = hs485d
[Interface 0]
Type = HMWLGW
Name =
Serial Number = LEQ0636503
Encryption Key = k7Z6yu73FR
Programme sind auch keine da, nur Direktverknüpfungen.
Firmware Update von was?Und in dem Zuge auch die Firmware updatezudaten wie Rexima bereits anmerkte.