ich nutze die Platine RPI-RF-MOD mit der HB-RF-USB-2 Platine. Funktioniert eigentlich alles wunderbar mit debmatic.
Was mich nur stutzig macht, ist die Tatsache, dass die LED der RPI-RF-MOD Platine dauerhaft rot leuchtet (nach dem Neustart (Strom raus/rein) leuchtet sie auch kurz mal blau).
Hat das irgendeine Bewandtnis?
debmatic wird in einer proxmox-VM betrieben.
Ausgabe lsubs:
Code: Alles auswählen
root@debmatic:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 10c4:8c07 Cygnal Integrated Products, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Code: Alles auswählen
root@debmatic:~# debmatic-info
debmatic version: 3.53.34-59
Kernel modules: Available
Raw UART dev: Available
HMRF Hardware: RPI-RF-MOD
Connected via: HB-RF-USB-2@usb-0000:00:1d.0-1 (/dev/raw-uart)
Board serial: 5Axxxxxxxxx
Radio MAC: 0xFFD72B
HMIP Hardware: RPI-RF-MOD
SGTIN: 30xxxxxxxxxxxxxx
Radio MAC: 0xB9668A