debmatic Update 3.57.4

deimos · Beitrag von **deimos** » 02.03.2021, 20:42

Hi,

ich habe eben das Update auf die 3.57.4 Firmware eben im testing APT Repository bereitgestellt.
Ich hoffe, dass eQ-3 diesmal die QS ordentlich durchgeführt hat, damit ich das Update in 2 Wochen auch ins stable APT Repository übernehmen kann.

Viele Grüße
Alex

lonsimbt · Beitrag von **lonsimbt** » 02.03.2021, 23:48

Das Update auf 3.57.4 ist gerade ohne Probleme durchgelaufen. Nach dem 2. Reboot der VM ist dann auch die grüne LED wieder ausgegangen.

Vielen Dank Alex für die rasend schnelle Bereitstellung des Updates!

Gruß Marco

stellar20 · Beitrag von **stellar20** » 03.03.2021, 10:38

Das Update auf 3.57.4 ist ohne Probleme durchgelaufen. Nach Reboot war der Zugriff sofort wieder möglich.

Vielen Dank Alex für die Bereitstellung des Updates!

pmiller · Beitrag von **pmiller** » 03.03.2021, 19:40

Servus!

Vorweg mal die good news: update lief problemlos durch.

Leider auch bad news: das unter viewtopic.php?f=81&t=64757&start=10 beschriebene Problem ist leider auch in dieser Version vorhanden.

in /var/log/messages findet man bei jedem GUI Restart, der alle 2-3 Minuten stattfindet, (also der blaue GUI Screen) folgende Meldung:

Mar 3 19:37:52 debmatic ReGaHss: SIGTERM: ReGaHss Halting

Wir lassen es jetzt mal ein paar Stunden laufen falls Du noch Infos brauchst. Werden dann aber irgendwann wieder zurückstellen.

Liebe Grüße aus Baden bei Wien,
Alexa & Peter

Alexandra · Beitrag von **Alexandra** » 03.03.2021, 20:39

Servus,

der Feinstaubsensor HmIP-SFD hat die bunten Bezeichnungen/Farbcodes im Update verloren:

vorher:

aktuell:

Liebe Grüße aus Baden,
Alexa

PS: die WebUI restartet immer noch alle 2-3min, der DutyCycle hat sich mittlerweile wieder beruhigt.

pmiller · Beitrag von **pmiller** » 03.03.2021, 20:50

Servus!

Die Status-LED am HB-RF-USB hat eine Änderung. War die bis jetzt in einem friedlich-monotonen Rot, so ist diese nun Grün-Blau blinkend. Allerdings ohne Alarm- oder Servicemeldung in der debmatic-GUI.

Falls es noch helfen sollte:
debmatic version: 3.57.4-67
Kernel modules: Available
Raw UART dev: Available
HMRF Hardware: RPI-RF-MOD
Connected via: HB-RF-USB@usb-0000:02:00.0-2.1 (/dev/raw-uart)
Board serial: 5A4993F###
Radio MAC: 0xFFF###
HMIP Hardware: RPI-RF-MOD
SGTIN: 3014F711A0001F5A4993F###
Radio MAC: 0xBF8B4C

Liebe Grüße aus Baden bei Wien,
Peter

deimos · Beitrag von **deimos** » 03.03.2021, 21:04

Hi,

pmiller hat geschrieben: ↑
03.03.2021, 19:40
Leider auch bad news: das unter viewtopic.php?f=81&t=64757&start=10 beschriebene Problem ist leider auch in dieser Version vorhanden.

in /var/log/messages findet man bei jedem GUI Restart, der alle 2-3 Minuten stattfindet, (also der blaue GUI Screen) folgende Meldung:

Mar 3 19:37:52 debmatic ReGaHss: SIGTERM: ReGaHss Halting

Wir lassen es jetzt mal ein paar Stunden laufen falls Du noch Infos brauchst. Werden dann aber irgendwann wieder zurückstellen.

Ich hatte ja schon geschrieben, was ich brauche: /var/log/hmserver.log und /var/log/messages bzw. /var/log/syslog.

Viele Grüße
Alex

Alexandra · Beitrag von **Alexandra** » 03.03.2021, 21:13

Servus,

wir sind gerade unterwegs ins Rechenzentrum, ca 25min bis zum nächsten Terminal,
wir beeilen uns,

bis dahin liebe Grüße,
Alexa und Peter

pmiller · Beitrag von **pmiller** » 03.03.2021, 21:47

Wenn du mehr willst gibt Bescheid - dann leg ich die die auf einen Downloadserver

hmserver.log:
Mar 3 21:36:07 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-0] SYSTEM: 0 Accesspoints in Queue
Mar 3 21:36:07 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-0] SYSTEM: Permanent-/Burstlistener Handler utilization: 0/50 used
Mar 3 21:36:07 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-0] SYSTEM: Eventlistener Handler utilization: 0/50 used
Mar 3 21:36:52 de.eq3.cbcs.legacy.bidcos.rpc.internal.LegacyNotificationHandler WARN [vert.x-worker-thread-1] Remove interface: 1093 http URL: http://127.0.0.1:31999 from client list because of communication problem
Mar 3 21:37:08 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-5] (un)registerCallback on VirtualDeviceHandlerRega called from url: xmlrpc_bin://127.0.0.1:31999
Mar 3 21:37:08 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-5] Added InterfaceId: 1007
Mar 3 21:37:08 de.eq3.ccu.virtualdevice.service.internal.rega.BackendWorker INFO [vert.x-worker-thread-14] Execute BackendCommand: de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand
Mar 3 21:37:18 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-4] (un)registerCallback on LegacyServiceHandler called from url: xmlrpc_bin://127.0.0.1:31999
Mar 3 21:37:18 de.eq3.cbcs.legacy.bidcos.rpc.internal.LegacyBackendNotificationHandler INFO [1093_WorkerPool-0] SYSTEM: LegacyBackendNotificationHandler Verticle or Worker started
Mar 3 21:37:18 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-2] init finished
Mar 3 21:37:18 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO [vert.x-worker-thread-2] Added InterfaceId: 1093
Mar 3 21:37:18 de.eq3.cbcs.legacy.bidcos.rpc.internal.DeviceUtil INFO [vert.x-worker-thread-2] updateDevicesForClient 1093 -> 51 device addresses will be added
Mar 3 21:38:33 de.eq3.cbcs.legacy.bidcos.rpc.internal.LegacyNotificationHandler WARN [vert.x-worker-thread-1] Remove interface: 1093 http URL: http://127.0.0.1:31999 from client list because of communication problem
Mar 3 21:38:49 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-5] (un)registerCallback on VirtualDeviceHandlerRega called from url: xmlrpc_bin://127.0.0.1:31999
Mar 3 21:38:49 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-5] Added InterfaceId: 1007
Mar 3 21:38:49 de.eq3.ccu.virtualdevice.service.internal.rega.BackendWorker INFO [vert.x-worker-thread-15] Execute BackendCommand: de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand
Mar 3 21:38:59 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-2] (un)registerCallback on LegacyServiceHandler called from url: xmlrpc_bin://127.0.0.1:31999
Mar 3 21:38:59 de.eq3.cbcs.legacy.bidcos.rpc.internal.LegacyBackendNotificationHandler INFO [1093_WorkerPool-1] SYSTEM: LegacyBackendNotificationHandler Verticle or Worker started
Mar 3 21:38:59 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-1] init finished
Mar 3 21:38:59 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO [vert.x-worker-thread-1] Added InterfaceId: 1093
Mar 3 21:38:59 de.eq3.cbcs.legacy.bidcos.rpc.internal.DeviceUtil INFO [vert.x-worker-thread-1] updateDevicesForClient 1093 -> 51 device addresses will be added
Mar 3 21:40:13 de.eq3.cbcs.legacy.bidcos.rpc.internal.LegacyNotificationHandler WARN [vert.x-worker-thread-3] Remove interface: 1093 http URL: http://127.0.0.1:31999 from client list because of communication problem
Mar 3 21:40:29 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-5] (un)registerCallback on VirtualDeviceHandlerRega called from url: xmlrpc_bin://127.0.0.1:31999
Mar 3 21:40:29 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-5] Added InterfaceId: 1007
Mar 3 21:40:29 de.eq3.ccu.virtualdevice.service.internal.rega.BackendWorker INFO [vert.x-worker-thread-16] Execute BackendCommand: de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand
Mar 3 21:40:39 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-3] (un)registerCallback on LegacyServiceHandler called from url: xmlrpc_bin://127.0.0.1:31999
Mar 3 21:40:39 de.eq3.cbcs.legacy.bidcos.rpc.internal.LegacyBackendNotificationHandler INFO [1093_WorkerPool-0] SYSTEM: LegacyBackendNotificationHandler Verticle or Worker started
Mar 3 21:40:39 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-0] init finished
Mar 3 21:40:39 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO [vert.x-worker-thread-0] Added InterfaceId: 1093
Mar 3 21:40:40 de.eq3.cbcs.legacy.bidcos.rpc.internal.DeviceUtil INFO [vert.x-worker-thread-0] updateDevicesForClient 1093 -> 51 device addresses will be added
Mar 3 21:41:07 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-0] SYSTEM: 0 Accesspoints in Queue
Mar 3 21:41:07 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-0] SYSTEM: Permanent-/Burstlistener Handler utilization: 0/50 used
Mar 3 21:41:07 de.eq3.cbcs.server.core.otau.DeviceBackgroundUpdateSubsystem INFO [vert.x-eventloop-thread-0] SYSTEM: Eventlistener Handler utilization: 0/50 used
Mar 3 21:41:56 de.eq3.cbcs.legacy.bidcos.rpc.internal.LegacyNotificationHandler WARN [vert.x-worker-thread-4] Remove interface: 1093 http URL: http://127.0.0.1:31999 from client list because of communication problem
Mar 3 21:42:10 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-5] (un)registerCallback on VirtualDeviceHandlerRega called from url: xmlrpc_bin://127.0.0.1:31999
Mar 3 21:42:10 de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega INFO [vert.x-eventloop-thread-5] Added InterfaceId: 1007
Mar 3 21:42:10 de.eq3.ccu.virtualdevice.service.internal.rega.BackendWorker INFO [vert.x-worker-thread-17] Execute BackendCommand: de.eq3.ccu.virtualdevice.service.internal.rega.BackendUpdateDevicesCommand
Mar 3 21:42:20 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-1] (un)registerCallback on LegacyServiceHandler called from url: xmlrpc_bin://127.0.0.1:31999
Mar 3 21:42:20 de.eq3.cbcs.legacy.bidcos.rpc.internal.LegacyBackendNotificationHandler INFO [1093_WorkerPool-0] SYSTEM: LegacyBackendNotificationHandler Verticle or Worker started
Mar 3 21:42:20 de.eq3.cbcs.legacy.bidcos.rpc.LegacyServiceHandler INFO [vert.x-worker-thread-0] init finished
Mar 3 21:42:20 de.eq3.cbcs.legacy.bidcos.rpc.internal.InterfaceInitializer INFO [vert.x-worker-thread-0] Added InterfaceId: 1093
Mar 3 21:42:20 de.eq3.cbcs.legacy.bidcos.rpc.internal.DeviceUtil INFO [vert.x-worker-thread-0] updateDevicesForClient 1093 -> 51 device addresses will be added

messages:
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A57099EBC52:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A57099EBC44:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A991FBB6:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A991FBA5:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A57099EBC33:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A9953693:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A989F8CD:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A98F9F70:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A989F85C:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A9953841:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A989F6D5:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A5A49946612:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0000D709A149ED:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:42:10 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0000DA499269ED:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:28 debmatic ReGaHss: SIGTERM: ReGaHss Halting
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A98F9F9A:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A9939A7E:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A9953918:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A57099EBC52:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A57099EBC44:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A991FBB6:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A991FBA5:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A57099EBC33:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A9953693:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A989F8CD:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A98F9F70:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A989F85C:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A9953841:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A58A989F6D5:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"000A5A49946612:1","SMOKE_DETECTOR_ALARM_STATUS"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: SMOKE_DETECTOR_ALARM_STATUS"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:43:50 debmatic ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {"0000D709A149ED:1","STATE"}, result: [faultCode:-5,faultString:"Unknown Parameter value for value key: STATE"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Mar 3 21:45:09 debmatic ReGaHss: SIGTERM: ReGaHss Halting

syslog:
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: Mar 03, 2021 9:45:40 PM io.vertx.core.impl.BlockedThreadChecker
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: WARNING: Thread Thread[vert.x-eventloop-thread-5,5,main] has been blocked for 8769 ms, time limit is 2000
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: io.vertx.core.VertxException: Thread blocked
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/jdk.internal.misc.Unsafe.park(Native Method)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:234)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(AbstractQueuedSynchronizer.java:2123)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:458)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega.registerCallback(VirtualDeviceHandlerRega.java:99)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at jdk.internal.reflect.GeneratedMethodAccessor59.invoke(Unknown Source)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/java.lang.reflect.Method.invoke(Method.java:566)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.execute(AnnotationAwareRpcHandler.java:80)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//de.eq3.ccu.server.internal.RpcMessageHandler.handle(RpcMessageHandler.java:70)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//de.eq3.ccu.server.internal.RpcMessageHandler.handle(RpcMessageHandler.java:24)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//io.vertx.core.eventbus.impl.HandlerRegistration.deliver(HandlerRegistration.java:212)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//io.vertx.core.eventbus.impl.HandlerRegistration.handle(HandlerRegistration.java:191)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//io.vertx.core.eventbus.impl.EventBusImpl.lambda$deliverToHandler$3(EventBusImpl.java:505)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//io.vertx.core.eventbus.impl.EventBusImpl$$Lambda$97/0x00000008401a5440.handle(Unknown Source)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//io.vertx.core.impl.ContextImpl$$Lambda$83/0x0000000840144840.run(Unknown Source)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//io.netty.util.concurrent.AbstractEventExecutor.safeExecute(AbstractEventExecutor.java:163)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//io.netty.util.concurrent.SingleThreadEventExecutor.runAllTasks(SingleThreadEventExecutor.java:403)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//io.netty.channel.nio.NioEventLoop.run(NioEventLoop.java:445)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at app//io.netty.util.concurrent.SingleThreadEventExecutor$5.run(SingleThreadEventExecutor.java:858)
Mar 3 21:45:40 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/java.lang.Thread.run(Thread.java:834)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: Mar 03, 2021 9:45:41 PM io.vertx.core.impl.BlockedThreadChecker
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: WARNING: Thread Thread[vert.x-eventloop-thread-5,5,main] has been blocked for 9768 ms, time limit is 2000
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: io.vertx.core.VertxException: Thread blocked
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/jdk.internal.misc.Unsafe.park(Native Method)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:234)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(AbstractQueuedSynchronizer.java:2123)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:458)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//de.eq3.ccu.virtualdevice.service.internal.rega.VirtualDeviceHandlerRega.registerCallback(VirtualDeviceHandlerRega.java:99)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at jdk.internal.reflect.GeneratedMethodAccessor59.invoke(Unknown Source)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/java.lang.reflect.Method.invoke(Method.java:566)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//de.eq3.cbcs.legacy.communication.rpc.internal.rpc.AnnotationAwareRpcHandler.execute(AnnotationAwareRpcHandler.java:80)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//de.eq3.ccu.server.internal.RpcMessageHandler.handle(RpcMessageHandler.java:70)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//de.eq3.ccu.server.internal.RpcMessageHandler.handle(RpcMessageHandler.java:24)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//io.vertx.core.eventbus.impl.HandlerRegistration.deliver(HandlerRegistration.java:212)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//io.vertx.core.eventbus.impl.HandlerRegistration.handle(HandlerRegistration.java:191)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//io.vertx.core.eventbus.impl.EventBusImpl.lambda$deliverToHandler$3(EventBusImpl.java:505)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//io.vertx.core.eventbus.impl.EventBusImpl$$Lambda$97/0x00000008401a5440.handle(Unknown Source)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//io.vertx.core.impl.ContextImpl.lambda$wrapTask$2(ContextImpl.java:337)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//io.vertx.core.impl.ContextImpl$$Lambda$83/0x0000000840144840.run(Unknown Source)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//io.netty.util.concurrent.AbstractEventExecutor.safeExecute(AbstractEventExecutor.java:163)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//io.netty.util.concurrent.SingleThreadEventExecutor.runAllTasks(SingleThreadEventExecutor.java:403)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//io.netty.channel.nio.NioEventLoop.run(NioEventLoop.java:445)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at app//io.netty.util.concurrent.SingleThreadEventExecutor$5.run(SingleThreadEventExecutor.java:858)
Mar 3 21:45:41 debmatic start_hmserver.sh[841]: #011at java.base@11.0.9.1/java.lang.Thread.run(Thread.java:834)

deimos · Beitrag von **deimos** » 03.03.2021, 22:03

Hi,

ich brauche es vollständig, die drei Dateien haben so teilweise unterschiedliche Zeiträume und bringen daher nur eingeschränkt etwas.

Viele Grüße
Alex

HomeMatic-Forum / FHZ-Forum

debmatic Update 3.57.4

debmatic Update 3.57.4

Re: debmatic Update 3.57.4

Re: debmatic Update 3.57.4

Re: debmatic Update 3.57.4

Re: debmatic Update 3.57.4

Re: debmatic Update 3.57.4

Re: debmatic Update 3.57.4

Re: debmatic Update 3.57.4

Re: debmatic Update 3.57.4

Re: debmatic Update 3.57.4