RPI-RF-Mod an HB-RF-USB nach Update nicht mehr verfügbar
Moderator: Co-Administratoren
-
- Beiträge: 17
- Registriert: 28.10.2019, 08:53
RPI-RF-Mod an HB-RF-USB nach Update nicht mehr verfügbar
Hey,
ich nutze seit einiger Zeit die Debmatic unter Proxmox auf einem NUC. Soweit hat immer aller gut funktioniert.
Ich nutze eine HB-RF-USB in Verbindung mit dem RPI-RF-Mod.
Nun habe ich die Tage das Update auf 3.57.5.71 gemacht und plötzlich findet er mein Funkmodul nicht mehr. Ich habe bereits neue USB Kabel sowie andere USB Ports am NUC versucht. Brachte alles keine Veränderung.
Proxmox erkennt den HB-RF-USB, diesen kann ich dann auch an die VM durchreichen. Im Terminal wird mir bei lsusb das Board auch angezeigt. us 003 Device 002: ID 0403:6f70 Future Technology Devices International, Ltd HB-RF-USB
Die LED am PRI-RF-Mod leuchtet Grün/Gelb. Wenn ich die debmaticinfo richtig deute, erkennt er das HB-RF-USB aber die PRI-RF-Mod nicht.
root@Debmatic:/home/frederic# sudo debmatic-info
debmatic version: 3.57.5-71
Kernel modules: Available
Raw UART dev: Available
HMRF Hardware: unknown
Board serial: unknown
Radio MAC: unknown
HMIP Hardware: unknown
SGTIN: unknown
Radio MAC: unknown
Jemand nen Ansatz?
ich nutze seit einiger Zeit die Debmatic unter Proxmox auf einem NUC. Soweit hat immer aller gut funktioniert.
Ich nutze eine HB-RF-USB in Verbindung mit dem RPI-RF-Mod.
Nun habe ich die Tage das Update auf 3.57.5.71 gemacht und plötzlich findet er mein Funkmodul nicht mehr. Ich habe bereits neue USB Kabel sowie andere USB Ports am NUC versucht. Brachte alles keine Veränderung.
Proxmox erkennt den HB-RF-USB, diesen kann ich dann auch an die VM durchreichen. Im Terminal wird mir bei lsusb das Board auch angezeigt. us 003 Device 002: ID 0403:6f70 Future Technology Devices International, Ltd HB-RF-USB
Die LED am PRI-RF-Mod leuchtet Grün/Gelb. Wenn ich die debmaticinfo richtig deute, erkennt er das HB-RF-USB aber die PRI-RF-Mod nicht.
root@Debmatic:/home/frederic# sudo debmatic-info
debmatic version: 3.57.5-71
Kernel modules: Available
Raw UART dev: Available
HMRF Hardware: unknown
Board serial: unknown
Radio MAC: unknown
HMIP Hardware: unknown
SGTIN: unknown
Radio MAC: unknown
Jemand nen Ansatz?
- deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: RPI-RF-Mod an HB-RF-USB nach Update nicht mehr verfügbar
Hi,
kannst du bitte mal die Ausgabe von "dmesg | grep usb" posten?
Viele Grüße
Alex
kannst du bitte mal die Ausgabe von "dmesg | grep usb" posten?
Viele Grüße
Alex
Zuletzt geändert von deimos am 09.07.2021, 15:18, insgesamt 1-mal geändert.
-
- Beiträge: 17
- Registriert: 28.10.2019, 08:53
Re: RPI-RF-Mod an HB-RF-USB nach Update nicht mehr verfügbar
Wow du bist ja schnell....
Yes, anbei:
root@Debmatic:/home/frederic# lsusb -v -d 0403:6f70
Bus 003 Device 002: ID 0403:6f70 Future Technology Devices International, Ltd HB-RF-USB
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0403 Future Technology Devices International, Ltd
idProduct 0x6f70 HB-RF-USB
bcdDevice 6.00
iManufacturer 1 Alexander Reinert
iProduct 2 HB-RF-USB
iSerial 3 A93F92V4
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 150mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 HB-RF-USB
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Yes, anbei:
root@Debmatic:/home/frederic# lsusb -v -d 0403:6f70
Bus 003 Device 002: ID 0403:6f70 Future Technology Devices International, Ltd HB-RF-USB
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0403 Future Technology Devices International, Ltd
idProduct 0x6f70 HB-RF-USB
bcdDevice 6.00
iManufacturer 1 Alexander Reinert
iProduct 2 HB-RF-USB
iSerial 3 A93F92V4
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 150mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 HB-RF-USB
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
- deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: RPI-RF-Mod an HB-RF-USB nach Update nicht mehr verfügbar
Hi,
gut, dann bitte mal
Viele Grüße
Alex
gut, dann bitte mal
Code: Alles auswählen
systemctl stop debmatic
detect_radio_module --debug /dev/raw-uart
Alex
-
- Beiträge: 17
- Registriert: 28.10.2019, 08:53
Re: RPI-RF-Mod an HB-RF-USB nach Update nicht mehr verfügbar
Liest sich fast so als hätte es nichts mit dem Update zu tun. Könnte das Funkmodul kaputt sein?
root@Debmatic:/home/frederic# detect_radio_module --debug /dev/raw-uart
Sending HM frame: fd 00 03 fe 00 01 14 1e
Received HM frame: fd 00 0f fe 00 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c 68 c7
Sending HM frame: fd 00 03 fe 01 01 92 1d
Received HM frame: fd 00 0f fe 01 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c e9 c5
Sending HM frame: fd 00 03 fe 02 03 18 12
Received HM frame: fd 00 04 fe 02 05 00 87 3b
Sending HM frame: fd 00 03 00 03 00 12 00
Received HM frame: fd 00 04 00 03 04 03 19 0e
Sending HM frame: fd 00 03 fe 04 01 8c 1d
Received HM frame: fd 00 0f fe 04 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c ec c0
Sending HM frame: fd 00 03 fe 05 03 8a 11
Received HM frame: fd 00 04 fe 05 05 00 07 54
Sending HM frame: fd 00 03 00 06 00 0c 00
Received HM frame: fd 00 04 00 06 04 03 19 4a
Sending HM frame: fd 00 03 fe 07 01 86 1d
Received HM frame: fd 00 0f fe 07 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c ef c3
Sending HM frame: fd 00 03 fe 08 03 24 12
Received HM frame: fd 00 04 fe 08 05 00 87 b3
Sending HM frame: fd 00 03 00 09 00 2e 00
Received HM frame: fd 00 04 00 09 04 03 19 86
Error: Radio module was not detected
root@Debmatic:/home/frederic# detect_radio_module --debug /dev/raw-uart
Sending HM frame: fd 00 03 fe 00 01 14 1e
Received HM frame: fd 00 0f fe 00 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c 68 c7
Sending HM frame: fd 00 03 fe 01 01 92 1d
Received HM frame: fd 00 0f fe 01 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c e9 c5
Sending HM frame: fd 00 03 fe 02 03 18 12
Received HM frame: fd 00 04 fe 02 05 00 87 3b
Sending HM frame: fd 00 03 00 03 00 12 00
Received HM frame: fd 00 04 00 03 04 03 19 0e
Sending HM frame: fd 00 03 fe 04 01 8c 1d
Received HM frame: fd 00 0f fe 04 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c ec c0
Sending HM frame: fd 00 03 fe 05 03 8a 11
Received HM frame: fd 00 04 fe 05 05 00 07 54
Sending HM frame: fd 00 03 00 06 00 0c 00
Received HM frame: fd 00 04 00 06 04 03 19 4a
Sending HM frame: fd 00 03 fe 07 01 86 1d
Received HM frame: fd 00 0f fe 07 05 01 48 4d 49 50 5f 54 52 58 5f 42 6c ef c3
Sending HM frame: fd 00 03 fe 08 03 24 12
Received HM frame: fd 00 04 fe 08 05 00 87 b3
Sending HM frame: fd 00 03 00 09 00 2e 00
Received HM frame: fd 00 04 00 09 04 03 19 86
Error: Radio module was not detected
- deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: RPI-RF-Mod an HB-RF-USB nach Update nicht mehr verfügbar
Wenn du zu 100% sicher bist, dass du wirklich ein RPI-RF-MOD hast, dann bitte:
Wenn er da beim zweiten Befehl am Ende anzeigt, dass das Funkmodul gefunden wurde, dann passt alles und du kannst debmatic wieder starten mit
Wenn nicht, dann suchen wir weiter.
Viele Grüße
Alex
Code: Alles auswählen
java $JAVA_ARGS -Dgnu.io.rxtx.SerialPorts=$HM_HOST_GPIO_UART -jar /opt/HmIP/hmip-copro-update.jar -p $HM_HOST_GPIO_UART -o -f /firmware/RPI-RF-MOD/dualcopro_update_blhmip-$NEW_VERSION.eq3
detect_radio_module --debug /dev/raw-uart
Code: Alles auswählen
systemctl start debmatic
Viele Grüße
Alex
-
- Beiträge: 17
- Registriert: 28.10.2019, 08:53
Re: RPI-RF-Mod an HB-RF-USB nach Update nicht mehr verfügbar
Er scheint mir dem Port nicht einverstanden:
root@Debmatic:/home/frederic# java $JAVA_ARGS -Dgnu.io.rxtx.SerialPorts=$HM_HOST_GPIO_UART -jar /opt/HmIP/hmip-copro-update.jar -p $HM_HOST_GPIO_UART -o -f /firmware/RPI-RF-MOD/dualcopro_update_blhmip-$NEW_VERSION.eq3
[ERROR] Error while trying to open serial port: Exception while trying to open serial port. Check configured port '-o'
[INFO] Exiting update tool.
root@Debmatic:/home/frederic#
root@Debmatic:/home/frederic# java $JAVA_ARGS -Dgnu.io.rxtx.SerialPorts=$HM_HOST_GPIO_UART -jar /opt/HmIP/hmip-copro-update.jar -p $HM_HOST_GPIO_UART -o -f /firmware/RPI-RF-MOD/dualcopro_update_blhmip-$NEW_VERSION.eq3
[ERROR] Error while trying to open serial port: Exception while trying to open serial port. Check configured port '-o'
[INFO] Exiting update tool.
root@Debmatic:/home/frederic#
- deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: RPI-RF-Mod an HB-RF-USB nach Update nicht mehr verfügbar
sorry, war ein Copy&Waste Fehler, so muss es korrekt sein:
Code: Alles auswählen
java -Dgnu.io.rxtx.SerialPorts=/dev/raw-uart -jar /opt/HmIP/hmip-copro-update.jar -p /dev/raw-uart -o -f /firmware/RPI-RF-MOD/dualcopro_update_blhmip-4.2.14.eq3
detect_radio_module --debug /dev/raw-uart
Zuletzt geändert von deimos am 09.07.2021, 15:48, insgesamt 1-mal geändert.
-
- Beiträge: 17
- Registriert: 28.10.2019, 08:53
Re: RPI-RF-Mod an HB-RF-USB nach Update nicht mehr verfügbar
Wir nähern uns . Ein neuer Fehler ^^
root@Debmatic:/home/frederic# java -Dgnu.io.rxtx.SerialPorts=/dev/raw-uart -jar /opt/HmIP/hmip-copro-update.jar -p /dev/raw-uart -o -f /firmware/RPI-RF-MOD/dualcopro_update_blhmip-4.2.14eq3
[INFO] SGTIN = 3014F711A0001F58A9A71365
[INFO] Performing update with firmware file '/firmware/RPI-RF-MOD/dualcopro_update_blhmip-4.2.14eq3' ...
[ERROR] Error in coprocessor communication: The firmware file name 'dualcopro_update_blhmip-4.2.14eq3' does not contain a valid version number.
java.lang.Exception: The firmware file name 'dualcopro_update_blhmip-4.2.14eq3' does not contain a valid version number.
at de.eq3.cbcs.tools.copro.update.hmip.TRXAdapterUpdater.updateTrxAdapter(TRXAdapterUpdater.java:110)
at de.eq3.cbcs.tools.copro.update.hmip.HmipCoproUpdater.main(HmipCoproUpdater.java:86)
[INFO] Exiting update tool.
root@Debmatic:/home/frederic#
root@Debmatic:/home/frederic# java -Dgnu.io.rxtx.SerialPorts=/dev/raw-uart -jar /opt/HmIP/hmip-copro-update.jar -p /dev/raw-uart -o -f /firmware/RPI-RF-MOD/dualcopro_update_blhmip-4.2.14eq3
[INFO] SGTIN = 3014F711A0001F58A9A71365
[INFO] Performing update with firmware file '/firmware/RPI-RF-MOD/dualcopro_update_blhmip-4.2.14eq3' ...
[ERROR] Error in coprocessor communication: The firmware file name 'dualcopro_update_blhmip-4.2.14eq3' does not contain a valid version number.
java.lang.Exception: The firmware file name 'dualcopro_update_blhmip-4.2.14eq3' does not contain a valid version number.
at de.eq3.cbcs.tools.copro.update.hmip.TRXAdapterUpdater.updateTrxAdapter(TRXAdapterUpdater.java:110)
at de.eq3.cbcs.tools.copro.update.hmip.HmipCoproUpdater.main(HmipCoproUpdater.java:86)
[INFO] Exiting update tool.
root@Debmatic:/home/frederic#
- deimos
- Beiträge: 5396
- Registriert: 20.06.2017, 10:38
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Leimersheim
- Hat sich bedankt: 121 Mal
- Danksagung erhalten: 957 Mal
- Kontaktdaten:
Re: RPI-RF-Mod an HB-RF-USB nach Update nicht mehr verfügbar
Das muss /firmware/RPI-RF-MOD/dualcopro_update_blhmip-4.2.14.eq3 sein (Punkt vor eq3). Ich hatte das noch editiert, aber du warst wohl zu schnell.