RPI-RF-Mod an HB-RF-USB nicht mehr verfügbar

[simon_23]

Hallo zusammen,
nach einem Stromausfall ist mein HB RF USB nicht mehr verfügbar.

Code: Alles auswählen

root@raspberrypi:/home/pi# dmesg | grep usb
[    0.139679] usbcore: registered new interface driver usbfs
[    0.139739] usbcore: registered new interface driver hub
[    0.139806] usbcore: registered new device driver usb
[    0.140190] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.140423] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[    1.428053] usbcore: registered new interface driver r8152
[    1.428125] usbcore: registered new interface driver lan78xx
[    1.428211] usbcore: registered new interface driver smsc95xx
[    1.431869] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    1.431890] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.431905] usb usb1: Product: xHCI Host Controller
[    1.431919] usb usb1: Manufacturer: Linux 6.1.19-v8+ xhci-hcd
[    1.431932] usb usb1: SerialNumber: 0000:01:00.0
[    1.433787] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    1.433808] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.433824] usb usb2: Product: xHCI Host Controller
[    1.433837] usb usb2: Manufacturer: Linux 6.1.19-v8+ xhci-hcd
[    1.433850] usb usb2: SerialNumber: 0000:01:00.0
[    1.437325] usbcore: registered new interface driver uas
[    1.437447] usbcore: registered new interface driver usb-storage
[    1.448709] usbcore: registered new interface driver usbhid
[    1.448724] usbhid: USB HID core driver
[    1.686858] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.837467] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    1.837504] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.837521] usb 1-1: Product: USB2.0 Hub
[    2.134808] usb 1-1.2: new full-speed USB device number 3 using xhci_hcd
[    2.251802] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6f70, bcdDevice= 6.00
[    2.251837] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.251854] usb 1-1.2: Product: HB-RF-USB
[    2.251869] usb 1-1.2: Manufacturer: Alexander Reinert
[    2.251882] usb 1-1.2: SerialNumber: A93F9BZ0
[    7.431899] usbcore: registered new interface driver brcmfmac
[  132.890863] usb 1-1.2: USB disconnect, device number 3
[  136.638861] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd
[  136.755774] usb 1-1.4: New USB device found, idVendor=0403, idProduct=6f70, bcdDevice= 6.00
[  136.755795] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  136.755802] usb 1-1.4: Product: HB-RF-USB
[  136.755809] usb 1-1.4: Manufacturer: Alexander Reinert
[  136.755814] usb 1-1.4: SerialNumber: A93F9BZ0

Code: Alles auswählen

root@raspberrypi:/home/pi# debmatic-info
debmatic version: 3.67.10-102
Kernel modules: Not available

Raw UART dev:   Not available
HMRF Hardware:  unknown
HMIP Hardware:  unknown

Die Abfrage dauert mega lange.

Code: Alles auswählen

root@raspberrypi:/home/pi# systemctl stop debmatic
detect_radio_module --debug /dev/raw-uart
/dev/raw-uart could not be opened


Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0403:6f70 Future Technology Devices International, Ltd HB-RF-USB
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Das Modul leuchtet nicht mehr und ich kann zuhause nichts mehr steuern.

Kann mir bitte einer helfen?

VG
Simon

[rentier-s]

Vielleicht auch ein Kernel Problem?

viewtopic.php?f=69&t=78380#p761126
viewtopic.php?f=65&t=78408
viewtopic.php?f=81&t=78082&start=10#p762215

[simon_23]

Danke für die Links aber irgendwie hilft das nicht

Code: Alles auswählen

dpkg-divert: warning: please specify --no-rename explicitly, the default will change to --rename in 1.20.x
Adding 'diversion of /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo to /usr/share/rpikernelhack/overlays/pivccu-raspberrypi.dtbo by rpikernelhack'
Unpacking pivccu-modules-raspberrypi (2.0-18) ...
Setting up raspberrypi-kernel-headers (1:1.20230317-1) ...
run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.19+
dkms: running auto installation service for kernel 6.1.19+:.
run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.19-v7+
dkms: running auto installation service for kernel 6.1.19-v7+:.
run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.19-v7l+
dkms: running auto installation service for kernel 6.1.19-v7l+:.
run-parts: executing /etc/kernel/header_postinst.d/dkms 6.1.19-v8+
dkms: running auto installation service for kernel 6.1.19-v8+:.
Setting up pivccu-modules-dkms (1.0.79) ...
Error! The module/version combo: pivccu-1.0.79
is not located in the DKMS tree.

Creating symlink /var/lib/dkms/pivccu/1.0.79/source ->
                 /usr/src/pivccu-1.0.79

DKMS: add completed.
Error! echo
Your kernel headers for kernel 6.1.19-v8+ cannot be found at
/lib/modules/6.1.19-v8+/build or /lib/modules/6.1.19-v8+/source.
You can use the --kernelsourcedir option to tell DKMS where it's located.
Created symlink /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service.
Created symlink /etc/systemd/system/debmatic.service.wants/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service.
Created symlink /etc/systemd/system/pivccu.service.requires/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service.
Setting up pivccu-modules-raspberrypi (2.0-18) ...
Removing 'diversion of /var/lib/piVCCU/dtb/overlays/pivccu-raspberrypi.dtbo to /usr/share/rpikernelhack/overlays/pivccu-raspberrypi.dtbo by rpikernelhack'
Created symlink /etc/systemd/system/multi-user.target.wants/pivccu-rpi-modules.service → /lib/systemd/system/pivccu-rpi-modules.service.

• root@raspberrypi:/home/pi# uname
  Linux
  root@raspberrypi:/home/pi# uname -a
  Linux raspberrypi 6.1.19-v8+ #1637 SMP PREEMPT Tue Mar 14 11:11:47 GMT 2023 aarch64 GNU/Linux
  root@raspberrypi:/home/pi# nano /boot/cmdline.txt
  root@raspberrypi:/home/pi# cat /boot/cmdline.txt
  console=serial0,115200 console=tty1 root=PARTUUID=831eced8-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
  arm_64bit=0

[simon_23]

ich habe jetzt das System neuinstalliert und da kommt auch der Fehler:
akteuell:

Code: Alles auswählen

root@openhabian:/home/openhabian# uname -a
Linux openhabian 5.15.84-v7l+ #1613 SMP Thu Jan 5 12:01:26 GMT 2023 armv7l GNU/Linux

Code: Alles auswählen

sudo apt install raspberrypi-kernel-headers pivccu-modules-dkms
.
.
.

DKMS: add completed.
Error! echo
Your kernel headers for kernel 5.15.84-v7l+ cannot be found at
/lib/modules/5.15.84-v7l+/build or /lib/modules/5.15.84-v7l+/source.
You can use the --kernelsourcedir option to tell DKMS where it's located.
Created symlink /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service.
Created symlink /etc/systemd/system/debmatic.service.wants/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service.
Created symlink /etc/systemd/system/pivccu.service.requires/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service.

Code: Alles auswählen

root@openhabian:/home/openhabian# debmatic-info
debmatic version: 3.67.10-102
Kernel modules: Not available
Raw UART dev:   Not available
HMRF Hardware:  unknown
HMIP Hardware:  unknown

[simon_23]

Beim 5ten Versuch hat es nun geklappt und ich bin auf:

Code: Alles auswählen

root@ccu:/home/homematic# uname -a
Linux ccu 6.1.19-v7l+ #1637 SMP Tue Mar 14 11:07:55 GMT 2023 armv7l GNU/Linux