HM-MOD-RPI-PCB an HB-RF-USB-2 wird nicht gefunden

Debian/Ubuntu basierte CCU

Moderator: Co-Administratoren

Pert
Beiträge: 25
Registriert: 26.02.2008, 12:05

HM-MOD-RPI-PCB an HB-RF-USB-2 wird nicht gefunden

Beitrag von Pert » 02.07.2023, 17:28

Ich möchte das Funkmodul HM-MOD-RPI-PCB an dem HB-RF-USB-2 laufen lassen, es wird aber leider unter debmatic nicht gefunden. Debmatic läuft als VM unter Proxmox. Das Funkmodul funktioniert auf jeden Fall (direkt auf dem Raspi aufgesteckt). Vielleicht hat jemand eine Idee, ich komme nicht weiter...

Code: Alles auswählen

root@debmatic:~# debmatic-info
debmatic version: 3.69.7-108
OS:               Debian GNU/Linux 11 (bullseye)
Kernel:           5.10.0-23-amd64 x86_64
Service Status:   Running
Kernel modules:   Available
Raw UART dev:     Available
HMRF Hardware:    unknown
HMIP Hardware:    unknown

Code: Alles auswählen

root@debmatic:~# dmesg
[  378.434906] usb 2-1: new full-speed USB device number 3 using xhci_hcd
[  378.587827] usb 2-1: New USB device found, idVendor=10c4, idProduct=8c07, bcdDevice= 2.00
[  378.587831] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  378.587832] usb 2-1: Product: HB-RF-USB-2
[  378.587833] usb 2-1: Manufacturer: Alexander Reinert
[  378.587834] usb 2-1: SerialNumber: e83ecc57fb9dec1195a96c8a43a0c072
[  378.592575] usb 2-1: DKey: 3735636365333865 3131636564396266 6138633639613539 3237306330613334
[  378.592578] usb 2-1: HKey: 1d1fbe27377253e9 34efb3c51aaccb3f 1aec9d2d24f5da77 45ee8eb604d496d4
[  378.592579] usb 2-1: SKey: 60ab36f79fffe505 ea5485c4d65196f5 15b69a11040a74bc d127a8f8447f30a9
[  378.592580] usb 2-1: SKey: 8b4765602f5b8b09 08b2737bb8b61b44 e443733a9b36e2a3 5e28243a66f663dc
[  378.592581] usb 2-1: PKey: f50048a8d7cc3f44 ae8460d13cf61d60 2dc161f5272a5876 88c996b27737fbae
[  378.592582] usb 2-1: PKey: dd24b0aced521e88 cc457acb4b7c49a4 6745032ab2079847 becfb9f3af25d41f
[  378.593980] usb 2-1: Successfully verified device signature
[  378.593982] usb 2-1: Found HB-RF-USB-2 with serial e83ecc57fb9dec1195a96c8a43a0c072 at usb-0000:02:1b.0-1
[  378.595634] raw-uart raw-uart: Reset radio module
[  378.714765] raw-uart raw-uart: Registered new raw-uart device using underlying device HB-RF-USB-2@usb-0000:02:1b.0-1.

Code: Alles auswählen

root@debmatic:~# detect_radio_module --debug /dev/raw-uart
17:18:04.891905 Raw UART device: HB-RF-USB-2@usb-0000:02:1b.0-1
17:18:05.008968 Sucessfully resetted radio module.
17:18:05.009395 Sending HM frame:  fd 00 03 fe 00 01 14 1e
17:18:08.009937 Sending HM frame:  fd 00 03 00 01 00 9e 03
17:18:11.010403 Sending HM frame:  fd 00 03 fe 02 01 98 1d
17:18:14.010903 Sending HM frame:  fd 00 03 00 03 00 12 00
17:18:17.011375 Sending HM frame:  fd 00 03 fe 04 01 8c 1d
17:18:20.011874 Sending HM frame:  fd 00 03 00 05 00 06 00
17:18:23.129071 Sucessfully resetted radio module.
Error: Radio module was not detected

Benutzeravatar
deimos
Beiträge: 5399
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 958 Mal
Kontaktdaten:

Re: HM-MOD-RPI-PCB an HB-RF-USB-2 wird nicht gefunden

Beitrag von deimos » 02.07.2023, 18:31

Hi,

bitte ein Bild, wie du das Funkmodul aufgesteckt hast und ein Bild der Lötstellen der HB-RF-USB-2.

Viele Grüße
Alex

Pert
Beiträge: 25
Registriert: 26.02.2008, 12:05

Re: HM-MOD-RPI-PCB an HB-RF-USB-2 wird nicht gefunden

Beitrag von Pert » 03.07.2023, 17:11

Hi, danke für die Antwort.

Es scheint aber nicht am HB-RF-USB-2 oder am Funkmodul zu liegen zu liegen, denn wenn ich das HB-RF-USB-2 direkt an einen Raspi anschließe, funktioniert alles unter debmatic.

In der VM über proxmox leider nicht :-(

Installiert wurde alles, wie unter https://github.com/alexreinert/debmatic ... proxmox.md beschrieben.

Viele Grüße

pert

Benutzeravatar
deimos
Beiträge: 5399
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 958 Mal
Kontaktdaten:

Re: HM-MOD-RPI-PCB an HB-RF-USB-2 wird nicht gefunden

Beitrag von deimos » 03.07.2023, 17:53

Hi,

in deinem ersten Post schreibst du nur von einem direkt aufgesteckten HM-MOD-RPI-PCB, nicht von der Kombi mit HB-RF-USB-2, was stimmt jetzt?

Viele Grüße
Ale

Pert
Beiträge: 25
Registriert: 26.02.2008, 12:05

Re: HM-MOD-RPI-PCB an HB-RF-USB-2 wird nicht gefunden

Beitrag von Pert » 04.07.2023, 16:56

Hi, ich hatte geschrieben;
Ich möchte das Funkmodul HM-MOD-RPI-PCB an dem HB-RF-USB-2 laufen lassen,
Also nochmal zur Klarstellung: Funkmodul HM-MOD-RPI-PCB auf dem HB-RF-USB-2 läuft ohne Probleme an einem Raspi mit debmatic, aber nicht in einer Proxmox VM an einer NUC.

Benutzeravatar
deimos
Beiträge: 5399
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 958 Mal
Kontaktdaten:

Re: HM-MOD-RPI-PCB an HB-RF-USB-2 wird nicht gefunden

Beitrag von deimos » 04.07.2023, 17:14

Hi,

du hast geschrieben:
Pert hat geschrieben:
02.07.2023, 17:28
Das Funkmodul funktioniert auf jeden Fall (direkt auf dem Raspi aufgesteckt).
Aber egal.

Bitte mal den kompletten dmesg nach einem frischen Reboot. Bei dem, was du initial gepostet hast, ist es nicht vollständig und vor allem wurde da die HB-RF-USB-2 erst nach über 6 Minuten innerhalb der VM erkannt. Wenn debmatic da bereits gestartet war, dann ist es klar, dass es nicht erkannt wurde.
Und danach dann bitte debmatic stoppen (sudo systemctl stop debmatic) und dann nochmal den Test mit detect_radio_module, da das nur dann aussagekräftig ist, wenn debmatic dabei gestoppt ist, weil es sonst regelmäßig dazu kommt, dass die Antworten vom Funkmodul vom den debmatic Prozessen empfangen werden und nicht vom detect_radio_module.

Viele Grüße
Alex

Pert
Beiträge: 25
Registriert: 26.02.2008, 12:05

Re: HM-MOD-RPI-PCB an HB-RF-USB-2 wird nicht gefunden

Beitrag von Pert » 04.07.2023, 21:05

Hallo Alex,
hier der dmesg nach einem reboot:

Code: Alles auswählen

[    0.000000] Linux version 5.10.0-23-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.179-1 (2023-05-12)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-23-amd64 root=UUID=2961aacd-eb91-4c57-92ae-159417dc1807 ro quiet console=tty0 console=ttyS0,115200
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 19401001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 8737065093 cycles
[    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000006] tsc: Detected 1996.800 MHz processor
[    0.000976] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000980] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000984] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[    0.001016] MTRR default type: write-back
[    0.001017] MTRR fixed ranges enabled:
[    0.001018]   00000-9FFFF write-back
[    0.001019]   A0000-BFFFF uncachable
[    0.001020]   C0000-FFFFF write-protect
[    0.001021] MTRR variable ranges enabled:
[    0.001023]   0 base 0080000000 mask FF80000000 uncachable
[    0.001024]   1 disabled
[    0.001024]   2 disabled
[    0.001025]   3 disabled
[    0.001026]   4 disabled
[    0.001026]   5 disabled
[    0.001027]   6 disabled
[    0.001028]   7 disabled
[    0.001039] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.004841] found SMP MP-table at [mem 0x000f5bd0-0x000f5bdf]
[    0.005134] RAMDISK: [mem 0x34897000-0x36442fff]
[    0.005144] ACPI: Early table checksum verification disabled
[    0.005150] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.005157] ACPI: RSDT 0x000000007FFE2FB3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005163] ACPI: FACP 0x000000007FFE2CE5 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005169] ACPI: DSDT 0x000000007FFDF040 003CA5 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005173] ACPI: FACS 0x000000007FFDF000 000040
[    0.005176] ACPI: APIC 0x000000007FFE2D59 000078 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005179] ACPI: SSDT 0x000000007FFE2DD1 0000CA (v01 BOCHS  VMGENID  00000001 BXPC 00000001)
[    0.005182] ACPI: HPET 0x000000007FFE2E9B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005185] ACPI: SRAT 0x000000007FFE2ED3 0000B8 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005188] ACPI: WAET 0x000000007FFE2F8B 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005191] ACPI: Reserving FACP table memory at [mem 0x7ffe2ce5-0x7ffe2d58]
[    0.005192] ACPI: Reserving DSDT table memory at [mem 0x7ffdf040-0x7ffe2ce4]
[    0.005193] ACPI: Reserving FACS table memory at [mem 0x7ffdf000-0x7ffdf03f]
[    0.005194] ACPI: Reserving APIC table memory at [mem 0x7ffe2d59-0x7ffe2dd0]
[    0.005195] ACPI: Reserving SSDT table memory at [mem 0x7ffe2dd1-0x7ffe2e9a]
[    0.005196] ACPI: Reserving HPET table memory at [mem 0x7ffe2e9b-0x7ffe2ed2]
[    0.005197] ACPI: Reserving SRAT table memory at [mem 0x7ffe2ed3-0x7ffe2f8a]
[    0.005197] ACPI: Reserving WAET table memory at [mem 0x7ffe2f8b-0x7ffe2fb2]
[    0.005215] ACPI: Local APIC address 0xfee00000
[    0.005246] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.005249] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.005250] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
[    0.005252] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x7ffd9fff] -> [mem 0x00000000-0x7ffd9fff]
[    0.005261] NODE_DATA(0) allocated [mem 0x7ffb0000-0x7ffd9fff]
[    0.005566] Zone ranges:
[    0.005567]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.005568]   DMA32    [mem 0x0000000001000000-0x000000007ffd9fff]
[    0.005570]   Normal   empty
[    0.005571]   Device   empty
[    0.005572] Movable zone start for each node
[    0.005576] Early memory node ranges
[    0.005577]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.005578]   node   0: [mem 0x0000000000100000-0x000000007ffd9fff]
[    0.005580] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[    0.005581] On node 0 totalpages: 524152
[    0.005582]   DMA zone: 64 pages used for memmap
[    0.005583]   DMA zone: 21 pages reserved
[    0.005584]   DMA zone: 3998 pages, LIFO batch:0
[    0.005585]   DMA32 zone: 8128 pages used for memmap
[    0.005586]   DMA32 zone: 520154 pages, LIFO batch:63
[    0.005593] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.005626] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.006140] On node 0, zone DMA32: 38 pages in unavailable ranges
[    0.007121] ACPI: PM-Timer IO Port: 0x608
[    0.007123] ACPI: Local APIC address 0xfee00000
[    0.007131] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.007169] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.007172] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.007174] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.007174] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.007176] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.007177] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.007178] ACPI: IRQ0 used by override.
[    0.007179] ACPI: IRQ5 used by override.
[    0.007180] ACPI: IRQ9 used by override.
[    0.007180] ACPI: IRQ10 used by override.
[    0.007181] ACPI: IRQ11 used by override.
[    0.007182] Using ACPI (MADT) for SMP configuration information
[    0.007184] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.007188] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.007205] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.007207] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.007208] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.007208] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.007210] [mem 0x80000000-0xfeffbfff] available for PCI devices
[    0.007211] Booting paravirtualized kernel on KVM
[    0.007213] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.011570] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
[    0.012135] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u2097152
[    0.012140] pcpu-alloc: s221184 r8192 d28672 u2097152 alloc=1*2097152
[    0.012142] pcpu-alloc: [0] 0 
[    0.012167] kvm-guest: stealtime: cpu 0, msr 7dc35080
[    0.012171] kvm-guest: PV spinlocks disabled, single CPU
[    0.012179] Built 1 zonelists, mobility grouping on.  Total pages: 515939
[    0.012180] Policy zone: DMA32
[    0.012181] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-23-amd64 root=UUID=2961aacd-eb91-4c57-92ae-159417dc1807 ro quiet console=tty0 console=ttyS0,115200
[    0.012764] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.012925] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.012958] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.015561] Memory: 261408K/2096608K available (12295K kernel code, 2536K rwdata, 7568K rodata, 2668K init, 17720K bss, 113952K reserved, 0K cma-reserved)
[    0.015869] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.015911] Kernel/User page tables isolation: enabled
[    0.015938] ftrace: allocating 36577 entries in 143 pages
[    0.033008] ftrace: allocated 143 pages with 5 groups
[    0.033286] rcu: Hierarchical RCU implementation.
[    0.033287] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=1.
[    0.033288] 	Rude variant of Tasks RCU enabled.
[    0.033289] 	Tracing variant of Tasks RCU enabled.
[    0.033290] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.033291] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.037171] NR_IRQS: 524544, nr_irqs: 256, preallocated irqs: 16
[    0.050392] Console: colour VGA+ 80x25
[    0.050402] printk: console [tty0] enabled
[    0.050437] printk: console [ttyS0] enabled
[    0.050458] ACPI: Core revision 20200925
[    0.050607] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.050711] APIC: Switch to symmetric I/O mode setup
[    0.050909] x2apic enabled
[    0.051143] Switched APIC routing to physical x2apic.
[    0.052222] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.052247] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
[    0.052251] Calibrating delay loop (skipped) preset value.. 3993.60 BogoMIPS (lpj=7987200)
[    0.052254] pid_max: default: 32768 minimum: 301
[    0.052318] LSM: Security Framework initializing
[    0.052339] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.052420] AppArmor: AppArmor initialized
[    0.052422] TOMOYO Linux initialized
[    0.052471] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.052489] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.052951] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.052952] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.052955] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.052956] Spectre V2 : Mitigation: Retpolines
[    0.052957] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.052958] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.052959] Speculative Store Bypass: Vulnerable
[    0.052961] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.052961] MMIO Stale Data: Unknown: No mitigations
[    0.071778] Freeing SMP alternatives memory: 32K
[    0.181303] smpboot: CPU0: Intel Common KVM processor (family: 0xf, model: 0x6, stepping: 0x1)
[    0.181594] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[    0.181676] rcu: Hierarchical SRCU implementation.
[    0.182028] NMI watchdog: Perf NMI watchdog permanently disabled
[    0.182108] smp: Bringing up secondary CPUs ...
[    0.182109] smp: Brought up 1 node, 1 CPU
[    0.182110] smpboot: Max logical packages: 1
[    0.182111] smpboot: Total of 1 processors activated (3993.60 BogoMIPS)
[    0.187530] node 0 deferred pages initialised in 4ms
[    0.187785] devtmpfs: initialized
[    0.187836] x86/mm: Memory block size: 128MB
[    0.188308] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.188323] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.188376] pinctrl core: initialized pinctrl subsystem
[    0.188690] NET: Registered protocol family 16
[    0.188793] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.188938] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.188973] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.188979] audit: initializing netlink subsys (disabled)
[    0.189127] thermal_sys: Registered thermal governor 'fair_share'
[    0.189128] thermal_sys: Registered thermal governor 'bang_bang'
[    0.189129] thermal_sys: Registered thermal governor 'step_wise'
[    0.189129] thermal_sys: Registered thermal governor 'user_space'
[    0.189130] thermal_sys: Registered thermal governor 'power_allocator'
[    0.189133] cpuidle: using governor ladder
[    0.189134] cpuidle: using governor menu
[    0.189188] ACPI: bus type PCI registered
[    0.189190] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.189331] PCI: Using configuration type 1 for base access
[    0.190054] Kprobes globally optimized
[    0.190077] audit: type=2000 audit(1688496948.989:1): state=initialized audit_enabled=0 res=1
[    0.190186] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.350799] ACPI: Added _OSI(Module Device)
[    0.350800] ACPI: Added _OSI(Processor Device)
[    0.350801] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.350802] ACPI: Added _OSI(Processor Aggregator Device)
[    0.350803] ACPI: Added _OSI(Linux-Dell-Video)
[    0.350804] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.350805] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.352052] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.353629] ACPI: Interpreter enabled
[    0.353643] ACPI: (supports S0 S3 S4 S5)
[    0.353644] ACPI: Using IOAPIC for interrupt routing
[    0.353656] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.353789] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.358163] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.358169] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[    0.358176] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.358384] acpiphp: Slot [3] registered
[    0.358403] acpiphp: Slot [4] registered
[    0.358427] acpiphp: Slot [6] registered
[    0.358441] acpiphp: Slot [7] registered
[    0.358455] acpiphp: Slot [8] registered
[    0.358469] acpiphp: Slot [9] registered
[    0.358483] acpiphp: Slot [10] registered
[    0.358500] acpiphp: Slot [11] registered
[    0.358517] acpiphp: Slot [12] registered
[    0.358532] acpiphp: Slot [13] registered
[    0.358545] acpiphp: Slot [14] registered
[    0.358562] acpiphp: Slot [15] registered
[    0.358576] acpiphp: Slot [16] registered
[    0.358590] acpiphp: Slot [17] registered
[    0.358606] acpiphp: Slot [18] registered
[    0.358621] acpiphp: Slot [19] registered
[    0.358635] acpiphp: Slot [20] registered
[    0.358648] acpiphp: Slot [21] registered
[    0.358662] acpiphp: Slot [22] registered
[    0.358675] acpiphp: Slot [23] registered
[    0.358692] acpiphp: Slot [24] registered
[    0.358706] acpiphp: Slot [25] registered
[    0.358720] acpiphp: Slot [26] registered
[    0.358733] acpiphp: Slot [27] registered
[    0.358747] acpiphp: Slot [28] registered
[    0.358761] acpiphp: Slot [29] registered
[    0.358791] PCI host bridge to bus 0000:00
[    0.358793] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.358794] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.358796] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.358797] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.358797] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[    0.358799] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.358833] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.359249] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.359779] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.363727] pci 0000:00:01.1: reg 0x20: [io  0xf080-0xf08f]
[    0.364831] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.364833] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.364833] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.364834] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.365055] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[    0.368672] pci 0000:00:01.2: reg 0x20: [io  0xf040-0xf05f]
[    0.370438] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.370816] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.370824] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.371012] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.372280] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfcffffff pref]
[    0.376267] pci 0000:00:02.0: reg 0x18: [mem 0xfea50000-0xfea50fff]
[    0.381749] pci 0000:00:02.0: reg 0x30: [mem 0xfea40000-0xfea4ffff pref]
[    0.382202] pci 0000:00:03.0: [1af4:1002] type 00 class 0x00ff00
[    0.383836] pci 0000:00:03.0: reg 0x10: [io  0xf000-0xf03f]
[    0.390130] pci 0000:00:03.0: reg 0x20: [mem 0xfd600000-0xfd603fff 64bit pref]
[    0.392697] pci 0000:00:05.0: [1b36:0001] type 01 class 0x060400
[    0.394473] pci 0000:00:05.0: reg 0x10: [mem 0xfea51000-0xfea510ff 64bit]
[    0.396893] pci 0000:00:12.0: [1af4:1000] type 00 class 0x020000
[    0.398391] pci 0000:00:12.0: reg 0x10: [io  0xf060-0xf07f]
[    0.400257] pci 0000:00:12.0: reg 0x14: [mem 0xfea52000-0xfea52fff]
[    0.405604] pci 0000:00:12.0: reg 0x20: [mem 0xfd604000-0xfd607fff 64bit pref]
[    0.406963] pci 0000:00:12.0: reg 0x30: [mem 0xfea00000-0xfea3ffff pref]
[    0.407709] pci 0000:00:1e.0: [1b36:0001] type 01 class 0x060400
[    0.409203] pci 0000:00:1e.0: reg 0x10: [mem 0xfea53000-0xfea530ff 64bit]
[    0.413559] pci 0000:00:1f.0: [1b36:0001] type 01 class 0x060400
[    0.415189] pci 0000:00:1f.0: reg 0x10: [mem 0xfea54000-0xfea540ff 64bit]
[    0.417977] pci_bus 0000:01: extended config space not accessible
[    0.418181] acpiphp: Slot [0] registered
[    0.418202] acpiphp: Slot [1] registered
[    0.418218] acpiphp: Slot [2] registered
[    0.418236] acpiphp: Slot [3-2] registered
[    0.418252] acpiphp: Slot [4-2] registered
[    0.418267] acpiphp: Slot [5] registered
[    0.418283] acpiphp: Slot [6-2] registered
[    0.418315] acpiphp: Slot [7-2] registered
[    0.418332] acpiphp: Slot [8-2] registered
[    0.418348] acpiphp: Slot [9-2] registered
[    0.418365] acpiphp: Slot [10-2] registered
[    0.418382] acpiphp: Slot [11-2] registered
[    0.418398] acpiphp: Slot [12-2] registered
[    0.418422] acpiphp: Slot [13-2] registered
[    0.418446] acpiphp: Slot [14-2] registered
[    0.418469] acpiphp: Slot [15-2] registered
[    0.418486] acpiphp: Slot [16-2] registered
[    0.418503] acpiphp: Slot [17-2] registered
[    0.418523] acpiphp: Slot [18-2] registered
[    0.418540] acpiphp: Slot [19-2] registered
[    0.418560] acpiphp: Slot [20-2] registered
[    0.418577] acpiphp: Slot [21-2] registered
[    0.418593] acpiphp: Slot [22-2] registered
[    0.418609] acpiphp: Slot [23-2] registered
[    0.418626] acpiphp: Slot [24-2] registered
[    0.418642] acpiphp: Slot [25-2] registered
[    0.418661] acpiphp: Slot [26-2] registered
[    0.418678] acpiphp: Slot [27-2] registered
[    0.418695] acpiphp: Slot [28-2] registered
[    0.418711] acpiphp: Slot [29-2] registered
[    0.418725] acpiphp: Slot [30] registered
[    0.418739] acpiphp: Slot [31] registered
[    0.418828] pci 0000:01:01.0: [1af4:1004] type 00 class 0x010000
[    0.420256] pci 0000:01:01.0: reg 0x10: [io  0xe000-0xe03f]
[    0.421647] pci 0000:01:01.0: reg 0x14: [mem 0xfe800000-0xfe800fff]
[    0.428261] pci 0000:01:01.0: reg 0x20: [mem 0xfd400000-0xfd403fff 64bit pref]
[    0.430438] pci 0000:00:05.0: PCI bridge to [bus 01]
[    0.430455] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.430469] pci 0000:00:05.0:   bridge window [mem 0xfe800000-0xfe9fffff]
[    0.430495] pci 0000:00:05.0:   bridge window [mem 0xfd400000-0xfd5fffff 64bit pref]
[    0.431190] pci_bus 0000:02: extended config space not accessible
[    0.431422] acpiphp: Slot [0-2] registered
[    0.431444] acpiphp: Slot [1-2] registered
[    0.431461] acpiphp: Slot [2-2] registered
[    0.431479] acpiphp: Slot [3-3] registered
[    0.431496] acpiphp: Slot [4-3] registered
[    0.431517] acpiphp: Slot [5-2] registered
[    0.431534] acpiphp: Slot [6-3] registered
[    0.431551] acpiphp: Slot [7-3] registered
[    0.431568] acpiphp: Slot [8-3] registered
[    0.431585] acpiphp: Slot [9-3] registered
[    0.431602] acpiphp: Slot [10-3] registered
[    0.431623] acpiphp: Slot [11-3] registered
[    0.431641] acpiphp: Slot [12-3] registered
[    0.431658] acpiphp: Slot [13-3] registered
[    0.431675] acpiphp: Slot [14-3] registered
[    0.431696] acpiphp: Slot [15-3] registered
[    0.431713] acpiphp: Slot [16-3] registered
[    0.431731] acpiphp: Slot [17-3] registered
[    0.431751] acpiphp: Slot [18-3] registered
[    0.431769] acpiphp: Slot [19-3] registered
[    0.431786] acpiphp: Slot [20-3] registered
[    0.431807] acpiphp: Slot [21-3] registered
[    0.431824] acpiphp: Slot [22-3] registered
[    0.431841] acpiphp: Slot [23-3] registered
[    0.431861] acpiphp: Slot [24-3] registered
[    0.431879] acpiphp: Slot [25-3] registered
[    0.431896] acpiphp: Slot [26-3] registered
[    0.431926] acpiphp: Slot [27-3] registered
[    0.431944] acpiphp: Slot [28-3] registered
[    0.431961] acpiphp: Slot [29-3] registered
[    0.431979] acpiphp: Slot [30-2] registered
[    0.431999] acpiphp: Slot [31-2] registered
[    0.432253] pci 0000:02:1b.0: [1b36:000d] type 00 class 0x0c0330
[    0.432781] pci 0000:02:1b.0: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
[    0.435303] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.435319] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.435333] pci 0000:00:1e.0:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.435360] pci 0000:00:1e.0:   bridge window [mem 0xfd200000-0xfd3fffff 64bit pref]
[    0.436060] pci_bus 0000:03: extended config space not accessible
[    0.436307] acpiphp: Slot [0-3] registered
[    0.436329] acpiphp: Slot [1-3] registered
[    0.436347] acpiphp: Slot [2-3] registered
[    0.436368] acpiphp: Slot [3-4] registered
[    0.436386] acpiphp: Slot [4-4] registered
[    0.436404] acpiphp: Slot [5-3] registered
[    0.436421] acpiphp: Slot [6-4] registered
[    0.436439] acpiphp: Slot [7-4] registered
[    0.436456] acpiphp: Slot [8-4] registered
[    0.436477] acpiphp: Slot [9-4] registered
[    0.436496] acpiphp: Slot [10-4] registered
[    0.436514] acpiphp: Slot [11-4] registered
[    0.436531] acpiphp: Slot [12-4] registered
[    0.436549] acpiphp: Slot [13-4] registered
[    0.436570] acpiphp: Slot [14-4] registered
[    0.436588] acpiphp: Slot [15-4] registered
[    0.436609] acpiphp: Slot [16-4] registered
[    0.436627] acpiphp: Slot [17-4] registered
[    0.436645] acpiphp: Slot [18-4] registered
[    0.436663] acpiphp: Slot [19-4] registered
[    0.436681] acpiphp: Slot [20-4] registered
[    0.436700] acpiphp: Slot [21-4] registered
[    0.437818] acpiphp: Slot [22-4] registered
[    0.438482] acpiphp: Slot [23-4] registered
[    0.438504] acpiphp: Slot [24-4] registered
[    0.438537] acpiphp: Slot [25-4] registered
[    0.438555] acpiphp: Slot [26-4] registered
[    0.438573] acpiphp: Slot [27-4] registered
[    0.438597] acpiphp: Slot [28-4] registered
[    0.438618] acpiphp: Slot [29-4] registered
[    0.438637] acpiphp: Slot [30-3] registered
[    0.438655] acpiphp: Slot [31-3] registered
[    0.438866] pci 0000:00:1f.0: PCI bridge to [bus 03]
[    0.438881] pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
[    0.438895] pci 0000:00:1f.0:   bridge window [mem 0xfe400000-0xfe5fffff]
[    0.438921] pci 0000:00:1f.0:   bridge window [mem 0xfd000000-0xfd1fffff 64bit pref]
[    0.441164] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.441260] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.441345] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.441424] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.441470] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.441778] iommu: Default domain type: Translated 
[    0.441858] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.441860] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.441862] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.441863] vgaarb: loaded
[    0.441965] EDAC MC: Ver: 3.0.0
[    0.442444] NetLabel: Initializing
[    0.442445] NetLabel:  domain hash size = 128
[    0.442445] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.442464] NetLabel:  unlabeled traffic allowed by default
[    0.442465] PCI: Using ACPI for IRQ routing
[    0.442466] PCI: pci_cache_line_size set to 64 bytes
[    0.442649] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.442651] e820: reserve RAM buffer [mem 0x7ffda000-0x7fffffff]
[    0.442685] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.442696] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.442699] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.446352] clocksource: Switched to clocksource kvm-clock
[    0.458681] VFS: Disk quotas dquot_6.6.0
[    0.458704] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.458882] AppArmor: AppArmor Filesystem Enabled
[    0.458902] pnp: PnP ACPI init
[    0.458988] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.459015] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.459026] pnp 00:02: [dma 2]
[    0.459035] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.459053] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.459337] pnp: PnP ACPI: found 4 devices
[    0.465216] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.465294] NET: Registered protocol family 2
[    0.465466] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.467286] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.467496] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.467645] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.467664] TCP: Hash tables configured (established 16384 bind 16384)
[    0.467816] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.467839] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.467898] NET: Registered protocol family 1
[    0.467910] NET: Registered protocol family 44
[    0.467925] pci 0000:00:05.0: PCI bridge to [bus 01]
[    0.467965] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.468929] pci 0000:00:05.0:   bridge window [mem 0xfe800000-0xfe9fffff]
[    0.469470] pci 0000:00:05.0:   bridge window [mem 0xfd400000-0xfd5fffff 64bit pref]
[    0.470500] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.470511] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.471305] pci 0000:00:1e.0:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.471829] pci 0000:00:1e.0:   bridge window [mem 0xfd200000-0xfd3fffff 64bit pref]
[    0.472884] pci 0000:00:1f.0: PCI bridge to [bus 03]
[    0.472895] pci 0000:00:1f.0:   bridge window [io  0xc000-0xcfff]
[    0.473769] pci 0000:00:1f.0:   bridge window [mem 0xfe400000-0xfe5fffff]
[    0.474272] pci 0000:00:1f.0:   bridge window [mem 0xfd000000-0xfd1fffff 64bit pref]
[    0.475282] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.475284] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.475285] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.475286] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.475287] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[    0.475289] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.475290] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
[    0.475291] pci_bus 0000:01: resource 2 [mem 0xfd400000-0xfd5fffff 64bit pref]
[    0.475292] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.475293] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe7fffff]
[    0.475294] pci_bus 0000:02: resource 2 [mem 0xfd200000-0xfd3fffff 64bit pref]
[    0.475295] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.475296] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe5fffff]
[    0.475297] pci_bus 0000:03: resource 2 [mem 0xfd000000-0xfd1fffff 64bit pref]
[    0.475452] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.475464] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.475474] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.494241] PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.512719] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x710 took 36348 usecs
[    0.512772] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.530837] PCI Interrupt Link [LNKB] enabled at IRQ 10
[    0.549761] PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.568048] pci 0000:02:1b.0: quirk_usb_early_handoff+0x0/0x710 took 53919 usecs
[    0.568065] PCI: CLS 0 bytes, default 64
[    0.568137] Trying to unpack rootfs image as initramfs...
[    1.030755] Freeing initrd memory: 28336K
[    1.030872] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
[    1.031225] Initialise system trusted keyrings
[    1.031252] Key type blacklist registered
[    1.031327] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[    1.032302] zbud: loaded
[    1.032479] integrity: Platform Keyring initialized
[    1.032481] Key type asymmetric registered
[    1.032483] Asymmetric key parser 'x509' registered
[    1.032490] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.032532] io scheduler mq-deadline registered
[    1.033210] shpchp 0000:00:05.0: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0.S28_)
[    1.033217] shpchp 0000:00:05.0: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0)
[    1.033222] shpchp 0000:00:05.0: Cannot get control of SHPC hotplug
[    1.033278] shpchp 0000:00:1e.0: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0.SF0_)
[    1.033283] shpchp 0000:00:1e.0: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0)
[    1.033285] shpchp 0000:00:1e.0: Cannot get control of SHPC hotplug
[    1.033324] shpchp 0000:00:1f.0: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0.SF8_)
[    1.033328] shpchp 0000:00:1f.0: Requesting control of SHPC hotplug via OSHP (\_SB_.PCI0)
[    1.033330] shpchp 0000:00:1f.0: Cannot get control of SHPC hotplug
[    1.033338] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.033552] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.033905] Linux agpgart interface v0.103
[    1.033975] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    1.034073] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.034693] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.034698] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.034776] mousedev: PS/2 mouse device common for all mice
[    1.034972] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.035148] rtc_cmos 00:03: RTC can wake from S4
[    1.035539] rtc_cmos 00:03: registered as rtc0
[    1.035597] rtc_cmos 00:03: setting system clock to 2023-07-04T18:55:49 UTC (1688496949)
[    1.035652] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    1.035659] intel_pstate: CPU model not supported
[    1.035668] ledtrig-cpu: registered to indicate activity on CPUs
[    1.035847] NET: Registered protocol family 10
[    1.043385] Segment Routing with IPv6
[    1.043410] mip6: Mobile IPv6
[    1.043412] NET: Registered protocol family 17
[    1.043446] mpls_gso: MPLS GSO support
[    1.043565] IPI shorthand broadcast: enabled
[    1.043585] sched_clock: Marking stable (1029350588, 10908041)->(1042465337, -2206708)
[    1.043655] registered taskstats version 1
[    1.043658] Loading compiled-in X.509 certificates
[    1.082552] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.082574] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[    1.082610] zswap: loaded using pool lzo/zbud
[    1.082730] Key type .fscrypt registered
[    1.082731] Key type fscrypt-provisioning registered
[    1.082784] AppArmor: AppArmor sha1 policy hashing enabled
[    1.084667] Freeing unused decrypted memory: 2036K
[    1.085149] Freeing unused kernel image (initmem) memory: 2668K
[    1.092323] Write protecting the kernel read-only data: 22528k
[    1.092767] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    1.092888] Freeing unused kernel image (rodata/data gap) memory: 624K
[    1.142374] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.142404] x86/mm: Checking user space page tables
[    1.190021] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.190037] Run /init as init process
[    1.190038]   with arguments:
[    1.190039]     /init
[    1.190040]   with environment:
[    1.190040]     HOME=/
[    1.190041]     TERM=linux
[    1.190042]     BOOT_IMAGE=/boot/vmlinuz-5.10.0-23-amd64
[    1.328127] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[    1.328569] FDC 0 is a S82078B
[    1.382464] SCSI subsystem initialized
[    1.414200] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3
[    1.414380] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input2
[    1.425094] ACPI: bus type USB registered
[    1.425114] usbcore: registered new interface driver usbfs
[    1.425120] usbcore: registered new interface driver hub
[    1.425131] usbcore: registered new device driver usb
[    1.444784] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.446867] libata version 3.00 loaded.
[    1.448807] ata_piix 0000:00:01.1: version 2.13
[    1.456962] uhci_hcd: USB Universal Host Controller Interface driver
[    1.461802] scsi host0: ata_piix
[    1.464409] scsi host1: ata_piix
[    1.464452] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xf080 irq 14
[    1.464453] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xf088 irq 15
[    1.486216] PCI Interrupt Link [LNKC] enabled at IRQ 11
[    1.506391] uhci_hcd 0000:00:01.2: UHCI Host Controller
[    1.506400] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[    1.506416] uhci_hcd 0000:00:01.2: detected 2 ports
[    1.506540] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000f040
[    1.506753] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    1.506754] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.506756] usb usb1: Product: UHCI Host Controller
[    1.506757] usb usb1: Manufacturer: Linux 5.10.0-23-amd64 uhci_hcd
[    1.506758] usb usb1: SerialNumber: 0000:00:01.2
[    1.506921] hub 1-0:1.0: USB hub found
[    1.506982] hub 1-0:1.0: 2 ports detected
[    1.624880] ata2.01: NODEV after polling detection
[    1.625135] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.626000] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.648798] scsi host2: Virtio SCSI HBA
[    1.649684] scsi 2:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    2.5+ PQ: 0 ANSI: 5
[    1.650329] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.650331] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.675756] virtio_net virtio1 ens18: renamed from eth0
[    1.680308] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.691387] sd 2:0:0:0: Power-on or device reset occurred
[    1.691895] sd 2:0:0:0: [sda] 67108864 512-byte logical blocks: (34.4 GB/32.0 GiB)
[    1.691913] sd 2:0:0:0: [sda] Write Protect is off
[    1.691915] sd 2:0:0:0: [sda] Mode Sense: 63 00 00 08
[    1.691944] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.693083]  sda: sda1 sda2 < sda5 >
[    1.699547] xhci_hcd 0000:02:1b.0: xHCI Host Controller
[    1.699556] xhci_hcd 0000:02:1b.0: new USB bus registered, assigned bus number 2
[    1.699895] xhci_hcd 0000:02:1b.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    1.700676] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.702739] xhci_hcd 0000:02:1b.0: xHCI Host Controller
[    1.702758] xhci_hcd 0000:02:1b.0: new USB bus registered, assigned bus number 3
[    1.702763] xhci_hcd 0000:02:1b.0: Host supports USB 3.0 SuperSpeed
[    1.702852] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.702853] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.702855] usb usb2: Product: xHCI Host Controller
[    1.702856] usb usb2: Manufacturer: Linux 5.10.0-23-amd64 xhci-hcd
[    1.702857] usb usb2: SerialNumber: 0000:02:1b.0
[    1.703092] hub 2-0:1.0: USB hub found
[    1.703171] hub 2-0:1.0: 15 ports detected
[    1.703931] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.703949] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    1.703950] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.703951] usb usb3: Product: xHCI Host Controller
[    1.703952] usb usb3: Manufacturer: Linux 5.10.0-23-amd64 xhci-hcd
[    1.703953] usb usb3: SerialNumber: 0000:02:1b.0
[    1.704142] hub 3-0:1.0: USB hub found
[    1.704219] hub 3-0:1.0: 15 ports detected
[    1.744336] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    2.133185] usb 1-1: not running at top speed; connect to a high speed hub
[    2.168396] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[    2.168399] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
[    2.168401] usb 1-1: Product: QEMU USB Tablet
[    2.168401] usb 1-1: Manufacturer: QEMU
[    2.168402] usb 1-1: SerialNumber: 28754-0000:00:01.2-1
[    2.181721] hid: raw HID events driver (C) Jiri Kosina
[    2.188770] usbcore: registered new interface driver usbhid
[    2.188771] usbhid: USB HID core driver
[    2.190620] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4
[    2.190781] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[    2.230268] PM: Image not found (code -22)
[    2.232291] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[    2.335318] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.384947] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    2.387381] usb 2-1: New USB device found, idVendor=10c4, idProduct=8c07, bcdDevice= 2.00
[    2.387383] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.387385] usb 2-1: Product: HB-RF-USB-2
[    2.387386] usb 2-1: Manufacturer: Alexander Reinert
[    2.387387] usb 2-1: SerialNumber: e83ecc57fb9dec1195a96c8a43a0c072
[    2.484885] systemd[1]: Inserted module 'autofs4'
[    2.507538] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    2.507647] systemd[1]: Detected virtualization kvm.
[    2.507654] systemd[1]: Detected architecture x86-64.
[    2.508842] systemd[1]: Set hostname to <debmatic>.
[    2.744027] systemd[1]: Queued start job for default target Graphical Interface.
[    2.744805] random: systemd: uninitialized urandom read (16 bytes read)
[    2.745692] systemd[1]: Created slice system-getty.slice.
[    2.745776] random: systemd: uninitialized urandom read (16 bytes read)
[    2.746062] systemd[1]: Created slice system-modprobe.slice.
[    2.746083] random: systemd: uninitialized urandom read (16 bytes read)
[    2.746368] systemd[1]: Created slice User and Session Slice.
[    2.746472] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.746561] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.746803] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.746858] systemd[1]: Reached target Local Encrypted Volumes.
[    2.746905] systemd[1]: Reached target Paths.
[    2.746933] systemd[1]: Reached target Remote File Systems.
[    2.746957] systemd[1]: Reached target Slices.
[    2.747147] systemd[1]: Listening on Syslog Socket.
[    2.747298] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.747385] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.747648] systemd[1]: Listening on Journal Audit Socket.
[    2.747797] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.747973] systemd[1]: Listening on Journal Socket.
[    2.748739] systemd[1]: Listening on udev Control Socket.
[    2.748920] systemd[1]: Listening on udev Kernel Socket.
[    2.749969] systemd[1]: Mounting Huge Pages File System...
[    2.751021] systemd[1]: Mounting POSIX Message Queue File System...
[    2.752118] systemd[1]: Mounting Kernel Debug File System...
[    2.753941] systemd[1]: Mounting Kernel Trace File System...
[    2.760475] systemd[1]: Starting Set the console keyboard layout...
[    2.764236] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.769185] systemd[1]: Starting Load Kernel Module configfs...
[    2.772825] systemd[1]: Starting Load Kernel Module drm...
[    2.776544] systemd[1]: Starting Load Kernel Module fuse...
[    2.778429] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    2.778500] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.788475] systemd[1]: Starting Journal Service...
[    2.793909] systemd[1]: Starting Load Kernel Modules...
[    2.809971] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.826215] systemd[1]: Starting Coldplug All udev Devices...
[    2.835988] systemd[1]: Mounted Huge Pages File System.
[    2.836140] systemd[1]: Mounted POSIX Message Queue File System.
[    2.836344] systemd[1]: Mounted Kernel Debug File System.
[    2.836466] systemd[1]: Mounted Kernel Trace File System.
[    2.836831] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.837213] systemd[1]: modprobe@configfs.service: Succeeded.
[    2.845413] fuse: init (API version 7.32)
[    2.854882] systemd[1]: Finished Load Kernel Module configfs.
[    2.855443] systemd[1]: modprobe@fuse.service: Succeeded.
[    2.855701] systemd[1]: Finished Load Kernel Module fuse.
[    2.856068] systemd[1]: Finished Load Kernel Modules.
[    2.865651] systemd[1]: Mounting FUSE Control File System...
[    2.873801] systemd[1]: Mounting Kernel Configuration File System...
[    2.876564] systemd[1]: Starting Apply Kernel Variables...
[    2.882185] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.901449] systemd[1]: Finished Remount Root and Kernel File Systems.
[    2.901750] systemd[1]: Mounted FUSE Control File System.
[    2.901870] systemd[1]: Mounted Kernel Configuration File System.
[    2.904917] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    2.904999] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    2.905946] systemd[1]: Starting Load/Save Random Seed...
[    2.907167] systemd[1]: Starting Create System Users...
[    2.935201] systemd[1]: Finished Apply Kernel Variables.
[    2.936887] systemd[1]: modprobe@drm.service: Succeeded.
[    2.937155] systemd[1]: Finished Load Kernel Module drm.
[    2.966712] systemd[1]: Finished Create System Users.
[    2.967702] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.027366] systemd[1]: Finished Create Static Device Nodes in /dev.
[    3.029190] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    3.134192] systemd[1]: Started Rule-based Manager for Device Events and Files.
[    3.318146] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    3.332370] ACPI: Power Button [PWRF]
[    3.434904] systemd[1]: Finished Coldplug All udev Devices.
[    3.436538] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[    3.477624] systemd[1]: Started Journal Service.
[    3.527266] Free page reporting enabled
[    3.542539] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    3.542586] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.578804] systemd-journald[185]: Received client request to flush runtime journal.
[    3.579918] generic_raw_uart: loading out-of-tree module taints kernel.
[    3.579958] generic_raw_uart: module verification failed: signature and/or required key missing - tainting kernel
[    3.602772] usb 2-1: DKey: 3735636365333865 3131636564396266 6138633639613539 3237306330613334
[    3.602776] usb 2-1: HKey: 1d1fbe27377253e9 34efb3c51aaccb3f 1aec9d2d24f5da77 45ee8eb604d496d4
[    3.602777] usb 2-1: SKey: 60ab36f79fffe505 ea5485c4d65196f5 15b69a11040a74bc d127a8f8447f30a9
[    3.602778] usb 2-1: SKey: 8b4765602f5b8b09 08b2737bb8b61b44 e443733a9b36e2a3 5e28243a66f663dc
[    3.602779] usb 2-1: PKey: f50048a8d7cc3f44 ae8460d13cf61d60 2dc161f5272a5876 88c996b27737fbae
[    3.602781] usb 2-1: PKey: dd24b0aced521e88 cc457acb4b7c49a4 6745032ab2079847 becfb9f3af25d41f
[    3.604235] usb 2-1: Successfully verified device signature
[    3.604237] usb 2-1: Found HB-RF-USB-2 with serial e83ecc57fb9dec1195a96c8a43a0c072 at usb-0000:02:1b.0-1
[    3.609048] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    3.632015] raw-uart raw-uart: Reset radio module
[    3.752694] raw-uart raw-uart: Registered new raw-uart device using underlying device HB-RF-USB-2@usb-0000:02:1b.0-1.
[    3.753290] usbcore: registered new interface driver hb_rf_usb_2
[    3.800171] random: systemd: uninitialized urandom read (16 bytes read)
[    3.800196] random: systemd: uninitialized urandom read (16 bytes read)
[    3.800208] random: systemd: uninitialized urandom read (16 bytes read)
[    3.847090] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console
[    3.870382] Console: switching to colour dummy device 80x25
[    3.870591] [drm] Found bochs VGA, ID 0xb0c5.
[    3.870593] [drm] Framebuffer size 16384 kB @ 0xfc000000, mmio @ 0xfea50000.
[    3.875766] [TTM] Zone  kernel: Available graphics memory: 1009196 KiB
[    3.875769] [TTM] Initializing pool allocator
[    3.875773] [TTM] Initializing DMA pool allocator
[    3.877094] [drm] Found EDID data blob.
[    3.877194] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[    3.891173] fbcon: bochs-drmdrmfb (fb0) is primary device
[    3.894805] Console: switching to colour frame buffer device 160x50
[    3.905551] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    3.930620] audit: type=1400 audit(1688496952.392:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=253 comm="apparmor_parser"
[    3.930624] audit: type=1400 audit(1688496952.392:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=253 comm="apparmor_parser"
[    3.930627] audit: type=1400 audit(1688496952.392:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=253 comm="apparmor_parser"
[    3.969548] audit: type=1400 audit(1688496952.432:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=263 comm="apparmor_parser"
[    3.991497] Adding 998396k swap on /dev/sda5.  Priority:-2 extents:1 across:998396k FS
[    4.009728] audit: type=1400 audit(1688496952.472:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=272 comm="apparmor_parser"
[    4.009732] audit: type=1400 audit(1688496952.472:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=272 comm="apparmor_parser"
[    4.068328] random: crng init done
[    4.068330] random: 119 urandom warning(s) missed due to ratelimiting
[    4.583031] raw-uart raw-uart: Reset radio module
[   22.399194] raw-uart raw-uart: Reset radio module
Der "detect_radio_module" liefert exakt das Gleiche wie beim ersten Post_

Code: Alles auswählen

root@debmatic:~# detect_radio_module --debug /dev/raw-uart
21:01:02.579755 Raw UART device: HB-RF-USB-2@usb-0000:02:1b.0-1
21:01:02.696938 Sucessfully resetted radio module.
21:01:02.697451 Sending HM frame:  fd 00 03 fe 00 01 14 1e
21:01:05.698239 Sending HM frame:  fd 00 03 00 01 00 9e 03
21:01:08.698601 Sending HM frame:  fd 00 03 fe 02 01 98 1d
21:01:11.699087 Sending HM frame:  fd 00 03 00 03 00 12 00
21:01:14.699566 Sending HM frame:  fd 00 03 fe 04 01 8c 1d
21:01:17.700076 Sending HM frame:  fd 00 03 00 05 00 06 00
21:01:20.820922 Sucessfully resetted radio module.
Error: Radio module was not detected
Viele Grüße und schon mal vielen Dank für deinen Support.

pert

Pert
Beiträge: 25
Registriert: 26.02.2008, 12:05

Re: HM-MOD-RPI-PCB an HB-RF-USB-2 wird nicht gefunden

Beitrag von Pert » 12.07.2023, 22:54

Die Sache ist leider immer noch nicht gelöst.

Hat denn überhaupt jemand die HB-RF-USB-2 mit HM-MOD-RPI-PCB unter Proxmox zum Laufen gebracht?

Grüße..

Pert

Benutzeravatar
deimos
Beiträge: 5399
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 958 Mal
Kontaktdaten:

Re: HM-MOD-RPI-PCB an HB-RF-USB-2 wird nicht gefunden

Beitrag von deimos » 13.07.2023, 07:34

Hi,
Pert hat geschrieben:
12.07.2023, 22:54
Hat denn überhaupt jemand die HB-RF-USB-2 mit HM-MOD-RPI-PCB unter Proxmox zum Laufen gebracht?
Ja, ich zum Beispiel.

Kannst du mal das Funkmodul entfernen (im abgeschalteten Zustand) und TXD (Pin 8) und RXD (Pin 10) per Jumperkabel miteinander verbinden (vgl. auch https://www.elektronik-kompendium.de/si ... 907101.htm) und dann nochmal das detect_radio_module ausführen?
Und interessant wäre auch, mal die Spannung des 3.3V Pins zu messen, nachdem detect_radio_module lief (mit und ohne Funkmodul).

Viele Grüße
Alex

Benutzeravatar
deimos
Beiträge: 5399
Registriert: 20.06.2017, 10:38
System: Alternative CCU (auf Basis OCCU)
Wohnort: Leimersheim
Hat sich bedankt: 121 Mal
Danksagung erhalten: 958 Mal
Kontaktdaten:

Re: HM-MOD-RPI-PCB an HB-RF-USB-2 wird nicht gefunden

Beitrag von deimos » 13.07.2023, 07:37

Hi,

und noch eine Frage: Wie viele CPUs/CPU Kerne hat die VM? Es sollten mindestens zwei CPU Kerne sein.

Viele Grüße
Alex

Antworten

Zurück zu „debmatic“