Moderator: Co-Administratoren
Nur verstehen tue ich es nicht. Arbeitet eine CCU3 anders?17:16:10 [ttyACM0] --> ? (api.netatmo.net is unknown) Use one of B b C F i A Z E G M K U Y R T V W X e f m l t u x
Hallo vlcweb
Hallo herkherk hat geschrieben: ↑17.09.2018, 17:57Hallo zusammen,
komme einfach nicht mehr weiter
Ich dachte eigentlich, copy&paste wäre kein Problem und die Anleitung ist ja auch super geschrieben. Habe problemlos alle Variablen herausbekommen....aber: Nix passiert in der CCU3 und im Terminal bekomme ich folgendes Ergebnis vom script:
17:16:10 [ttyACM0] --> ? (api.netatmo.net is unknown) Use one of B b C F i A Z E G M K U Y R T V W X e f m l t u x
Was bedeutet das und wie behebe ich das???? Fragen über Fragen.
Kann jemand helfen?
Danke
Code: Alles auswählen
#!/bin/tclsh
load tclrega.so
#---------------------------------------------------------------------------------------------------------------#
# CONFIG #
#---------------------------------------------------------------------------------------------------------------#
# to obtain your own client ID and API key please register a new app here: http://dev.netatmo.com/dev/listapps
set clientId XXX
set clientSecret XXX
# the following are your normal netatmo credentials (the ones you used to setup your netatmo weather station)
set username XX
set password XX
# the following are MAC addresses of your indoor station and the outside module and rain module
set deviceid "70:ee:50:2b:99:99"
set moduleid "02:00:00:2b:99:99"
set rainid "05:00:00:04:99:99"
set ::env(LD_LIBRARY_PATH) "/usr/local/addons/cuxd"
set cfgfile "/tmp/netatmo.dat"
set logtag "netatmo.tcl"
set logfacility "local1"
# 0=panic, 1=alert 2=crit 3=err 4=warn 5=notice 6=info 7=debug
set loglevel 6
#---------------------------------------------------------------------------------------------------------------#
#---------------------------------------------------------------------------------------------------------------#
# GLOBAL VARIABLES #
#---------------------------------------------------------------------------------------------------------------#
set accesstoken ""
set refreshtoken ""
set tokenexpires 0
#---------------------------------------------------------------------------------------------------------------#
set loglevels {panic alert crit err warn notice info debug}
proc log {lvl msg} {
global logtag
global logfacility
global loglevel
global loglevels
set lvlnum [lsearch $loglevels $lvl]
if {$lvlnum <= $loglevel} {
if {$lvlnum <= 3} {
catch {exec logger -s -t $logtag -p $logfacility.$lvl $msg}
} else {
puts "$lvl: $msg"
catch {exec logger -t $logtag -p $logfacility.$lvl $msg}
}
}
}
proc refreshToken {rt ci cs} {
log debug "refreshing token"
set url "https://api.netatmo.net/oauth2/token"
set header "Content-Type: application/x-www-form-urlencoded;charset=UTF-8"
set parameter "grant_type=refresh_token&refresh_token=$rt&client_id=$ci&client_secret=$cs"
catch {exec /usr/local/addons/cuxd/curl -k -i -H $header -X POST -d $parameter $url} response
log debug "response was $response"
return $response
}
proc requestToken {ci cs un pw} {
log "debug" "requesting new token"
set url "https://api.netatmo.net/oauth2/token"
set header "Content-Type: application/x-www-form-urlencoded;charset=UTF-8"
set parameter "grant_type=password&client_id=$ci&client_secret=$cs&username=$un&password=$pw"
catch {exec /usr/local/addons/cuxd/curl -k -i -H $header -X POST -d $parameter $url} response
log debug "response was $response"
return $response
}
proc parseOAuthResponse {input} {
log debug "parsing authentication result"
global accesstoken
global refreshtoken
regexp {HTTP/1.1\s(\d*)} $input dummy returncode
regexp {\"access_token\":\"(.*?)\"} $input dummy accesstoken
regexp {\"refresh_token\":\"(.*?)\"} $input dummy refreshtoken
regexp {\"expires_in\":(.*?)\,} $input dummy expiresin
log debug "returncode is $returncode"
log debug "access token is $accesstoken"
log debug "refresh token is $refreshtoken"
log debug "expires in $expiresin"
if {[expr $returncode]!=200} {
log error "Authentication failed with code $returncode and response $input"
exit 1
}
return $expiresin
}
proc saveAccessToken {expin} {
global accesstoken
global refreshtoken
global tokenexpires
global cfgfile
log debug "saving new access token to $cfgfile"
set fileId [open $cfgfile "w"]
set now [clock seconds]
set tokenexpires [expr $now + $expin]
puts $fileId $accesstoken
puts $fileId $refreshtoken
puts $fileId $tokenexpires
close $fileId
}
proc loadAccessToken {} {
global accesstoken
global refreshtoken
global tokenexpires
global cfgfile
log debug "loading stored credentials from $cfgfile"
set fp [open $cfgfile r]
set file_data [read $fp]
close $fp
log debug "file data is: $file_data"
set data [split $file_data "\n"]
set accesstoken [lindex $data 0]
set refreshtoken [lindex $data 1]
set tokenexpires [lindex $data 2]
}
log debug "script has started"
if { [file exists $cfgfile] == 1} {
log info "found stored credentials"
loadAccessToken
set now [clock seconds]
log debug "current time is [clock format $now -format "%Y-%m-%dT%H:%M:%S"], token is valid until [clock format $tokenexpires -format "%Y-%m-%dT%H:%M:%S"]"
if {[expr $now >= $tokenexpires] == 1} {
log notice "token has already expired"
saveAccessToken [parseOAuthResponse [refreshToken $refreshtoken $clientId $clientSecret]]
log notice "oauth token successfully refreshed"
} else {
log info "token is still valid"
}
} else {
log warn "no stored credentials found"
saveAccessToken [parseOAuthResponse [requestToken $clientId $clientSecret $username $password]]
log notice "oauth token successfully initialized"
}
log debug "polling outdoor module..."
set url "https://api.netatmo.net/api/getmeasure?access_token=$accesstoken&device_id=$deviceid&module_id=$moduleid&scale=max&type=Temperature,Humidity&date_end=last"
log debug "querying $url"
catch {exec /usr/local/addons/cuxd/curl -k -# $url} response
log debug "response is: $response"
regexp {\"value\":\[\[(.*?),(.*?)\]} $response dummy otemp ohum
log info "Outside temperature is $otemp"
log info "Outside humidity is $ohum"
log debug "polling main module..."
set url "https://api.netatmo.net/api/getmeasure?access_token=$accesstoken&device_id=$deviceid&scale=max&type=Temperature,Humidity,CO2,Pressure,Noise&date_end=last"
log debug "querying $url"
catch {exec /usr/local/addons/cuxd/curl -k -# $url} response
log debug "response is: $response"
regexp {\"value\":\[\[(.*?),(.*?),(.*?),(.*?),(.*?)\]} $response dummy itemp ihum ico2 ipressure inoise
log info "LogI is $response"
log info "Inside temperature is $itemp"
log info "Inside humidity is $ihum"
log info "Inside CO2 level $ico2"
log info "Inside pressure is $ipressure"
log info "Inside noise level is $inoise"
log debug "polling regensensor module...1d"
set url "https://api.netatmo.net/api/getmeasure?access_token=$accesstoken&device_id=$deviceid&module_id=$rainid&scale=1day&type=sum_rain&date_end=last"
log debug "querying $url"
catch {exec /usr/local/addons/cuxd/curl -k -# $url} response
log debug "response is: $response"
regexp {\"value\":\[\[(.*?)\]} $response dummy rain1d
log info "LogR is $response"
log info "Outside Regen1d is $rain1d"
log debug "polling regensensor module...30min"
set url "https://api.netatmo.net/api/getmeasure?access_token=$accesstoken&device_id=$deviceid&module_id=$rainid&scale=30min&type=Rain,sum_rain&date_end=last"
log debug "querying $url"
catch {exec /usr/local/addons/cuxd/curl -k -# $url} response
log debug "response is: $response"
regexp {\"value\":\[\[(.*?),(.*?)\]} $response dummy rain2 rain30min
log info "LogR is $response"
log info "Outside rain2 is $rain2"
log info "Outside Regen30min is $rain30min"
#
# set ReGaHss variables
#
set rega_cmd ""
append rega_cmd "var ITemp = dom.GetObject('CUxD.CUX9002001:1.SET_TEMPERATURE');"
append rega_cmd "var IHumi = dom.GetObject('CUxD.CUX9002001:1.SET_HUMIDITY');"
append rega_cmd "var OTemp = dom.GetObject('CUxD.CUX9002002:1.SET_TEMPERATURE');"
append rega_cmd "var OHumi = dom.GetObject('CUxD.CUX9002002:1.SET_HUMIDITY');"
append rega_cmd "var Rain1 = dom.GetObject('Regenmenge_30min');"
append rega_cmd "var Rain2 = dom.GetObject('Regenmenge_1d');"
append rega_cmd "var Rain3 = dom.GetObject('Regen_aktuell');"
append rega_cmd "var IPress = dom.GetObject('Luftdruck');"
append rega_cmd "var ICO2 = dom.GetObject('CO2');"
append rega_cmd "var INoise = dom.GetObject('Sonometer');"
append rega_cmd "var gustA = dom.GetObject('Gustangle');"
append rega_cmd "var gustS = dom.GetObject('Guststaerke');"
append rega_cmd "OTemp.State('$otemp');"
append rega_cmd "OHumi.State('$ohum');"
append rega_cmd "ITemp.State('$itemp');"
append rega_cmd "IHumi.State('$ihum');"
append rega_cmd "IPress.State('$ipressure');"
append rega_cmd "ICO2.State('$ico2');"
append rega_cmd "INoise.State('$inoise');"
append rega_cmd "Rain1.State('$rain30min');"
append rega_cmd "Rain2.State('$rain1d');"
append rega_cmd "Rain3.State('$rain2');"
append rega_cmd "gustA.State('$gustangle');"
append rega_cmd "gustS.State('$guststrength');"
append rega_cmd "var sdatetime = system.Date('%d.%m.%Y %H:%M:%S');"
append rega_cmd "var netatmosynctime = dom.GetObject('SyncTime');"
append rega_cmd "netatmosynctime.Variable(sdatetime.ToString());"
rega_script $rega_cmd
Code: Alles auswählen
append rega_cmd "var gustA = dom.GetObject('Gustangle');"
append rega_cmd "var gustS = dom.GetObject('Guststaerke');"
append rega_cmd "gustA.State('$gustangle');"
append rega_cmd "gustS.State('$guststrength');"