HmIP-MIOB Pump with HmIP Access Point - connection help?

Support for our english speaking visitors

Moderator: Co-Administratoren

samuellazea
Beiträge: 72
Registriert: 09.10.2018, 08:49
System: CCU und Access Point
Hat sich bedankt: 16 Mal

HmIP-MIOB Pump with HmIP Access Point - connection help?

Beitrag von samuellazea » 22.10.2018, 10:49

Hello all,

Sorry for disturbing again. I have now another dilemma. I have the HM IP MIOB and I learned it in access point and assigned a pump control to it but for some reason it does not start the pump when needed. I used the scheme from the pump connection from the manual but without luck. Could anyone tell me what do I do wrong? I am attaching pictures so you can see what I have configured.

Thank you in advance for the help. It's much appreciated
Dateianhänge
44398790_10212909262714360_4304623490582970368_n.jpg
44570365_10212909263154371_5620374103098654720_n.jpg
44551317_10212909263554381_5121778462171856896_n.jpg
44511544_10212909263874389_1331041112701272064_o.jpg
44511544_10212909263874389_1331041112701272064_o.jpg (18.02 KiB) 3825 mal betrachtet
Zuletzt geändert von samuellazea am 22.10.2018, 12:47, insgesamt 1-mal geändert.

tomi_cc16
Beiträge: 1150
Registriert: 30.11.2013, 16:35
Wohnort: Mordor
Hat sich bedankt: 23 Mal
Danksagung erhalten: 56 Mal

Re: HmIP-miob pump connection help

Beitrag von tomi_cc16 » 22.10.2018, 12:46

Hi,

can you change the title to e.g. " HmIP-MIOB Pump with HmIP Access Point - connection help?"

So it's more clear for other that you need help with the HmIP Access Point and not CCU / RaspberryMatic.

The official english User Guide for the HmIP Access Point and e.g.HmIP-MIOB can be found here:
https://www.eq-3.com/Downloads/eq3/down ... -Guide.pdf
Zuletzt geändert von tomi_cc16 am 23.10.2018, 11:28, insgesamt 4-mal geändert.

samuellazea
Beiträge: 72
Registriert: 09.10.2018, 08:49
System: CCU und Access Point
Hat sich bedankt: 16 Mal

Re: HmIP-MIOB Pump with HmIP Access Point - connection help?

Beitrag von samuellazea » 22.10.2018, 13:07

Done. Thanks

samtruman
Beiträge: 5
Registriert: 14.12.2018, 12:56

Re: HmIP-MIOB Pump with HmIP Access Point - connection help?

Beitrag von samtruman » 14.12.2018, 13:16

Hello everyone, I bought a homematic ip set with radiator valves, the access point and the HmIP-MIOB and coupled all the elements via app and configured the HmIP-MIOB with output on 4.1 and 4.2 boiler control
I have trouble getting the HmIP-MIOB to work, I'll explain better
My system consisted of a vaillant boiler that also makes hot water and a wall-mounted chronothermostat with 230v input and 2 outputs where 2 boiler control wires were inserted (the boiler requires a normally open contact that when it closes it starts heating )
Now I have connected 230v to terminals 2.1 and 3.1 and the boiler control to terminals 4.1 and 4.2 but in this way the boiler does not turn on.
I also tried with a tester but also by setting the manual program on the app and raising the temperature to the radiators the circuit between 4.1 and 4.2 does not close.
Can anyone help me?

tomi_cc16
Beiträge: 1150
Registriert: 30.11.2013, 16:35
Wohnort: Mordor
Hat sich bedankt: 23 Mal
Danksagung erhalten: 56 Mal

Re: HmIP-MIOB Pump with HmIP Access Point - connection help?

Beitrag von tomi_cc16 » 14.12.2018, 13:25

Just for info because about MIOB and HomematicIP Access Point you will not find a lot of info:
You can aks the eQ-3 support - and post their answer in the forum.
https://www.eq-3.com/service/support.html

Have you also checked Homematic IP HmIP-WHS2 ?

samtruman
Beiträge: 5
Registriert: 14.12.2018, 12:56

Re: HmIP-MIOB Pump with HmIP Access Point - connection help?

Beitrag von samtruman » 14.12.2018, 14:38

Thank you, I checked HmIP-WHS2 and should be the same. The connection schema for boiler it's the same but in that way i give potential to normally open contacts of boiler an on my boiler it's specifically reccommended to not give 220v to contacts.
I'll try contacting eq-3

Sergo
Beiträge: 97
Registriert: 01.11.2017, 18:28
Wohnort: Estonia
Hat sich bedankt: 3 Mal
Danksagung erhalten: 9 Mal

Re: HmIP-MIOB Pump with HmIP Access Point - connection help?

Beitrag von Sergo » 14.12.2018, 14:50

samtruman hat geschrieben:
14.12.2018, 14:38
I'll try contacting eq-3
I have same question pending, waiting for arrival of HmIP-WHS2. Its very strange what you have observed. Dont forget to share response from ELV.
Its appear very strange: knowing that majority of heaters require pair of dry contacts to manipulate... and not providing it in unit designed specifically for managing heat. :shock: :shock: :shock:

samtruman
Beiträge: 5
Registriert: 14.12.2018, 12:56

Re: HmIP-MIOB Pump with HmIP Access Point - connection help?

Beitrag von samtruman » 14.12.2018, 17:00

If you see the scheme below take from HmIP-MIOB it should be as I said.It will provide 230v to 4.1. and 4.2 contacts
Bild

tomi_cc16
Beiträge: 1150
Registriert: 30.11.2013, 16:35
Wohnort: Mordor
Hat sich bedankt: 23 Mal
Danksagung erhalten: 56 Mal

Re: HmIP-MIOB Pump with HmIP Access Point - connection help?

Beitrag von tomi_cc16 » 14.12.2018, 21:56

You can check https://www.elv.de/homematic-ip-multi-io-box.html on the tab "Forenbeiträge" and check with google chrome (translate to english) what others asked ELV/e-Q3 about the product.

Sergo
Beiträge: 97
Registriert: 01.11.2017, 18:28
Wohnort: Estonia
Hat sich bedankt: 3 Mal
Danksagung erhalten: 9 Mal

Re: HmIP-MIOB Pump with HmIP Access Point - connection help?

Beitrag von Sergo » 15.12.2018, 08:55

Thanks, Tomi!
Found answers:
On question in this tread: https://www.elv.de/topic/verknuepfung-e ... toren.html
And comment to same question about Multi I/O: https://www.elv.de/topic/multi-io-box.html and (for reference) about use of Multi I/O with WTH wall thermostats(impossible) https://www.elv.de/topic/homematic-ip-m ... epfen.html
Samtruman, seem like you better return your HMIP-MIOB :(

Antworten

Zurück zu „HomeMatic - english“