Während Betrieb "RaspberryMatic ist noch nicht bereit"
Moderatoren: jmaus, Co-Administratoren
Während Betrieb "RaspberryMatic ist noch nicht bereit"
Hallo, ich habe gerade Produktiv in der WebUi gearbeitet bzw. ein Gerät unter Bedienung bedient. Plötzlich ging nichts mehr, ich habe dann auf "Startseite" geklickt und dann kam dieses Bild
Dies ist jetzt seit ca. 8 Minuten so und es geht nicht weiter.
- jmaus
- Beiträge: 9862
- Registriert: 17.02.2015, 14:45
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Dresden
- Hat sich bedankt: 464 Mal
- Danksagung erhalten: 1880 Mal
- Kontaktdaten:
Re: Während Betrieb "RaspberryMatic ist noch nicht bereit"
Per SSH einloggen und folgenden Befehl eingeben:
Und dann am besten mal zeitnah ein kompletten restart machen.
Code: Alles auswählen
/etc/init.d/S70ReGaHss restart
RaspberryMatic 3.75.7.20240420 @ ProxmoxVE – ~200 Hm-RF/HmIP-RF/HmIPW Geräte + ioBroker + HomeAssistant – GitHub / Sponsors / PayPal /
Re: Während Betrieb "RaspberryMatic ist noch nicht bereit"
Habe die Kiste schon per Terminal "reboot" restartet. Hatte das Problem aber jetzt auch schon öfters.
Re: Während Betrieb "RaspberryMatic ist noch nicht bereit"
Wollte gerade eben ein Programm editieren und hatte jetzt ebenfalls das von LevelOne2k geschilderte Problem.
-
- Beiträge: 4156
- Registriert: 26.01.2016, 08:14
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Renningen
- Hat sich bedankt: 348 Mal
- Danksagung erhalten: 284 Mal
Re: Während Betrieb "RaspberryMatic ist noch nicht bereit"
Da ist die Rega abgeschmiert. Deswegen hat Jens geschrieben wie man die wieder zum laufen bekommt. Auch schon gemacht?
- blackhole
- Beiträge: 3730
- Registriert: 21.07.2015, 14:03
- System: CCU
- Hat sich bedankt: 184 Mal
- Danksagung erhalten: 587 Mal
Re: Während Betrieb "RaspberryMatic ist noch nicht bereit"
Die aktuelle ReGaHss.community ist ziemlich empfindlich/instabil.
Ihr wisst ja wie das geht: Testcase, Github etc. oder alternativ einfach die ReGaHSS wechseln (geht bei der CCU3).
Ihr wisst ja wie das geht: Testcase, Github etc. oder alternativ einfach die ReGaHSS wechseln (geht bei der CCU3).
- jmaus
- Beiträge: 9862
- Registriert: 17.02.2015, 14:45
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Dresden
- Hat sich bedankt: 464 Mal
- Danksagung erhalten: 1880 Mal
- Kontaktdaten:
Re: Während Betrieb "RaspberryMatic ist noch nicht bereit"
Bitte untermauere deine Behauptungen hier mit Fakten, da du ansonsten nur Otto-Normal-Verbraucher irritierst mit deiner Aussage.
Ich kann hier nur erneut sagen, dass der einzige (wirklich einzige!) unterschied zwischen der ReGaHss.community und ReGaHss.normal die striktere Handhabung der Skriptsprache ist (d.h. nicht erlaubte Methodenaufrufe auf fremde Objekte erzeugen einen Fehler statt undefinierter Resultate). Ansonsten ist die "community" und die "normal" exakt gleich was Features und Bugfixes angeht.
RaspberryMatic 3.75.7.20240420 @ ProxmoxVE – ~200 Hm-RF/HmIP-RF/HmIPW Geräte + ioBroker + HomeAssistant – GitHub / Sponsors / PayPal /
- blackhole
- Beiträge: 3730
- Registriert: 21.07.2015, 14:03
- System: CCU
- Hat sich bedankt: 184 Mal
- Danksagung erhalten: 587 Mal
Re: Während Betrieb "RaspberryMatic ist noch nicht bereit"
Code: Alles auswählen
# ps
PID USER TIME COMMAND
1 root 0:00 init
2 root 0:00 [kthreadd]
4 root 0:00 [kworker/0:0H]
6 root 0:00 [mm_percpu_wq]
7 root 0:01 [ksoftirqd/0]
8 root 0:04 [rcu_preempt]
9 root 0:00 [rcu_sched]
10 root 0:00 [rcu_bh]
11 root 0:00 [migration/0]
12 root 0:00 [cpuhp/0]
13 root 0:00 [cpuhp/1]
14 root 0:00 [migration/1]
15 root 0:00 [ksoftirqd/1]
17 root 0:00 [kworker/1:0H]
18 root 0:00 [cpuhp/2]
19 root 0:00 [migration/2]
20 root 0:00 [ksoftirqd/2]
22 root 0:00 [kworker/2:0H]
23 root 0:00 [cpuhp/3]
24 root 0:00 [migration/3]
25 root 0:00 [ksoftirqd/3]
27 root 0:00 [kworker/3:0H]
28 root 0:00 [kdevtmpfs]
29 root 0:00 [netns]
33 root 0:00 [khungtaskd]
34 root 0:00 [oom_reaper]
35 root 0:00 [writeback]
36 root 0:00 [kcompactd0]
37 root 0:00 [crypto]
38 root 0:00 [kblockd]
39 root 0:00 [watchdogd]
40 root 0:00 [rpciod]
41 root 0:00 [xprtiod]
42 root 0:00 [kworker/u8:1]
44 root 0:00 [kswapd0]
45 root 0:00 [nfsiod]
55 root 0:00 [kthrotld]
57 root 0:00 [iscsi_eh]
58 root 0:00 [dwc_otg]
59 root 0:00 [DWC Notificatio]
60 root 0:00 [kworker/0:1H]
61 root 0:00 [vchiq-slot/0]
62 root 0:00 [vchiq-recy/0]
63 root 0:00 [vchiq-sync/0]
64 root 0:00 [vchiq-keep/0]
65 root 0:00 [SMIO]
66 root 0:00 [irq/92-mmc1]
70 root 0:00 [mmcqd/0]
71 root 0:00 [scsi_eh_0]
72 root 0:00 [scsi_tmf_0]
73 root 0:01 [usb-storage]
74 root 0:00 [jbd2/mmcblk0p2-]
75 root 0:00 [ext4-rsv-conver]
82 root 0:00 [jbd2/mmcblk0p3-]
83 root 0:00 [ext4-rsv-conver]
86 root 0:00 /usr/bin/psplash -n
95 root 0:00 watchdog -t 5 /dev/watchdog
187 root 0:16 /bin/hss_led -l 6
214 root 0:13 /sbin/udevd -d
234 root 0:00 [spi0]
248 root 0:00 [cfg80211]
252 root 0:00 [brcmf_wq/mmc1:0]
253 root 0:00 [brcmf_wdog/mmc1]
329 root 0:00 [kworker/2:1H]
371 root 0:04 /usr/sbin/irqbalance
378 root 0:02 /usr/sbin/rngd
387 dbus 0:00 dbus-daemon --system
425 root 0:00 /sbin/syslogd -n -m 0
428 root 0:00 /sbin/klogd -n
449 root 0:00 [ipv6_addrconf]
451 root 0:00 /sbin/udhcpc -b -t 100 -T 3 -S -x hostname:ccu3-webui -i eth0 -F ccu3-webui -V eQ3-CCU3 -s /bin/dhcp.script -p /var/run/udhcpc_eth0.pid
538 root 0:09 /usr/sbin/ifplugd -i eth0 -fI -u0 -d10
542 root 0:02 /usr/sbin/ifplugd -i wlan0 -MwI -u5 -d5
554 root 0:02 /usr/sbin/ntpd -g 10.1.0.10
577 root 0:00 /bin/eq3configd
585 root 0:00 /usr/sbin/lighttpd-angel -f /etc/lighttpd/lighttpd.conf -D
587 root 0:00 /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf -D
592 root 0:00 /bin/ssdpd
598 root 0:00 /usr/sbin/sshd
609 root 0:10 /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf -D
610 root 0:10 /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf -D
611 root 0:11 /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf -D
612 root 0:11 /usr/sbin/lighttpd -f /etc/lighttpd/lighttpd.conf -D
692 root 0:03 /bin/multimacd -f /etc/multimacd.conf -l 5
718 root 0:45 /bin/rfd -f /etc/config/rfd.conf -l 5
757 root 2:31 java -Xmx128m -Dos.arch=arm -Dlog4j.configuration=file:///etc/config/log4j.xml -Dfile.encoding=ISO-8859-1 -Dgnu.io.rxtx.SerialPorts=/dev/mmd_hmip -jar /opt/HMServer/HMIPServer.jar /etc/crRFD.conf
874 root 0:00 /bin/eq3-uds-services
884 root 0:00 [kworker/1:1H]
941 root 0:00 /usr/sbin/crond -f -l 9
2525 root 0:00 [kworker/3:1H]
3518 root 0:02 [kworker/1:0]
4053 root 0:00 [kworker/3:1]
5751 root 0:00 [kworker/u8:0]
5969 root 0:00 [kworker/1:1]
7086 root 0:00 [kworker/2:2]
7116 root 0:00 [kworker/0:1]
7273 root 0:00 [kworker/0:2]
7358 root 0:00 [kworker/3:0]
7376 root 0:00 [kworker/2:0]
7462 root 0:00 [kworker/0:0]
7495 root 0:00 sshd: root@pts/0
7505 root 0:00 -sh
7573 root 0:00 [kworker/2:1]
7633 root 0:00 [kworker/0:3]
7637 root 0:00 /sbin/udevd -d
7639 root 0:00 ps
- jmaus
- Beiträge: 9862
- Registriert: 17.02.2015, 14:45
- System: Alternative CCU (auf Basis OCCU)
- Wohnort: Dresden
- Hat sich bedankt: 464 Mal
- Danksagung erhalten: 1880 Mal
- Kontaktdaten:
Re: Während Betrieb "RaspberryMatic ist noch nicht bereit"
Und was genau soll ich aus diese Prozessliste lernen? Das ReGaHss nicht läuft. Das kann mehrere Ursachen haben und wenn die ReGaHss.community für dich nachweislich und reproduzierbar an der selben stelle abschmiert wo ReGaHss.normal weiter läuft dann würde mich in der Tat interessieren welche Aktionen das genau bitte triggern bzw. welche du da durchgeführt hast. Nur so lässt sich dann verlässlich ergründen ob hier wirklich ein ursächlicher Zusammenhang besteht der die community version als "instabiler" titulieren lässt.
RaspberryMatic 3.75.7.20240420 @ ProxmoxVE – ~200 Hm-RF/HmIP-RF/HmIPW Geräte + ioBroker + HomeAssistant – GitHub / Sponsors / PayPal /