Ja.
Wie sieht den deine Config in OpenHab aus? Welche IP nutzt du, die vom Raspberry oder die vom Container? Welche OpenHab Version hast du? Welche Sicherheitseinstellungen hast du in der CCU gewählt?
Viele Grüße
Alex
Moderator: Co-Administratoren
Ja.
Wie sieht den deine Config in OpenHab aus? Welche IP nutzt du, die vom Raspberry oder die vom Container? Welche OpenHab Version hast du? Welche Sicherheitseinstellungen hast du in der CCU gewählt?
in der runtime.cfg ist keine angabe von der IP notwendig. Ansonsten weiß ich nicht was Du mit Config in OH meinst.eQ3-HmIP-CCU3-App - 192.168.178.31 OFFLINE - COMMUNICATION_ERROR Homematic Bridge homematic:bridge:3014F711A061A7D3C9A63E14
und piVCCU3 :drwxrwxr-x+ 2 openhab openhab 4096 Jan 4 09:54 sitemaps
Ich bin kein Linux- Profi eher blutiger Anfänger.-rw-r--r-- 1 root root 1477 Dez 21 09:16 lxc.config
Kannst Du da was mit anfangen?[09:14:50] root@openHABianPi:/home/openhabian# apt-get update
Holen:1 http://raspbian.raspberrypi.org/raspbian stretch InRelease [15,0 kB]
OK:2 http://archive.raspberrypi.org/debian stretch InRelease
Ign:3 http://repos.azulsystems.com/debian stable InRelease
OK:4 http://repos.azulsystems.com/debian stable Release
Ign:5 https://dl.bintray.com/openhab/apt-repo2 stable InRelease
Holen:6 https://deb.nodesource.com/node_7.x stretch InRelease [4.635 B]
Holen:7 https://dl.bintray.com/openhab/apt-repo2 stable Release [6.051 B]
OK:8 https://www.pivccu.de/piVCCU stable InRelease
OK:7 https://dl.bintray.com/openhab/apt-repo2 stable Release
Es wurden 19,6 kB in 3 s geholt (5.098 B/s).
Paketlisten werden gelesen... Fertig
[09:15:09] root@openHABianPi:/home/openhabian# apt-get upgrade
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Paketaktualisierung (Upgrade) wird berechnet... Fertig
Die folgenden Pakete werden aktualisiert (Upgrade):
pivccu-modules-dkms raspi-copies-and-fills
2 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
Es müssen 37,0 kB an Archiven heruntergeladen werden.
Nach dieser Operation werden 6.144 B Plattenplatz freigegeben.
Möchten Sie fortfahren? [J/n] j
Holen:1 http://archive.raspberrypi.org/debian stretch/main armhf raspi-copies-and-fills armhf 0.11 [7.274 B]
Holen:2 https://www.pivccu.de/piVCCU stable/main armhf pivccu-modules-dkms all 1.0.27 [29,7 kB]
Es wurden 37,0 kB in 0 s geholt (58,2 kB/s).
Lese Changelogs... Fertig
Vorkonfiguration der Pakete ...
(Lese Datenbank ... 106047 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../pivccu-modules-dkms_1.0.27_all.deb ...
Removed /etc/systemd/system/pivccu.service.requires/pivccu-dkms.service.
Removed /etc/systemd/system/debmatic.service.wants/pivccu-dkms.service.
Removed /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service.
-------- Uninstall Beginning --------
Module: pivccu
Version: 1.0.25
Kernel: 4.14.98-v7+ (armv7l)
-------------------------------------
Status: Before uninstall, this module version was ACTIVE on this kernel.
dummy_rx8130.ko:
- Uninstallation
- Deleting from: /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
dw_apb_raw_uart.ko:
- Uninstallation
- Deleting from: /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
eq3_char_loop.ko:
- Uninstallation
- Deleting from: /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
fake_hmrf.ko:
- Uninstallation
- Deleting from: /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
generic_raw_uart.ko:
- Uninstallation
- Deleting from: /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
hb_rf_usb.ko:
- Uninstallation
- Deleting from: /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
led_trigger_timer.ko:
- Uninstallation
- Deleting from: /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
meson_raw_uart.ko:
- Uninstallation
- Deleting from: /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
pl011_raw_uart.ko:
- Uninstallation
- Deleting from: /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
plat_eq3ccu2.ko:
- Uninstallation
- Deleting from: /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
rpi_rf_mod_led.ko:
- Uninstallation
- Deleting from: /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
rtc-rx8130.ko:
- Uninstallation
- Deleting from: /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
depmod....
DKMS: uninstall completed.
------------------------------
Deleting module version: 1.0.25
completely from the DKMS tree.
------------------------------
Done.
Entpacken von pivccu-modules-dkms (1.0.27) über (1.0.25) ...
Vorbereitung zum Entpacken von .../raspi-copies-and-fills_0.11_armhf.deb ...
Entpacken von raspi-copies-and-fills (0.11) über (0.10) ...
raspi-copies-and-fills (0.11) wird eingerichtet ...
pivccu-modules-dkms (1.0.27) wird eingerichtet ...
Creating symlink /var/lib/dkms/pivccu/1.0.27/source ->
/usr/src/pivccu-1.0.27
DKMS: add completed.
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area....
make -j4 KERNELRELEASE=4.14.98-v7+ ARCH=arm all........
cleaning build area....
DKMS: build completed.
dummy_rx8130.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
dw_apb_raw_uart.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
eq3_char_loop.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
fake_hmrf.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
generic_raw_uart.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
hb_rf_usb.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
led_trigger_timer.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
meson_raw_uart.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
pl011_raw_uart.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
plat_eq3ccu2.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
rpi_rf_mod_led.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
rtc-rx8130.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.14.98-v7+/kernel/drivers/pivccu/
depmod...
DKMS: install completed.
Created symlink /etc/systemd/system/multi-user.target.wants/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service.
Created symlink /etc/systemd/system/debmatic.service.wants/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service.
Created symlink /etc/systemd/system/pivccu.service.requires/pivccu-dkms.service → /lib/systemd/system/pivccu-dkms.service.
Updating FireMotD available updates count ...
[09:16:51] root@openHABianPi:/home/openhabian# reboot
Die Erfahrung zeigt, dass das leider nicht so unwahrscheinlich ist. Teilweise wurde auch schon für Funkmodule vergessen, diese in den Servern einzutragen.
GrußOFFLINE - COMMUNICATION_ERROR Unknown XML-RPC tag: title