seit längerem verfolge ich den Gedanken unser Haus "smart" zu gestalten und da ein Raspberrry noch im Haus lag war ein entsprechendes Funkmodul von ELV samt Heizkörperthermostat und Tür/Fenstersensor von der Firma "MAX!" schnell bestellt.
Der Zusammenbau ging von der Hand und dann kam auch schon die Ernüchterung:
Das Thema "Anlernen" gestaltet sich bisher als unüberbrückbares Hindernis. Daher hoffe ich, das ihr mir helfen könnt.
Verwendete Hardware:
Raspberry 3b+ mit RPI-RF-MOD mit 5v 2A Netzteil
Die Netwerkverbindung steht und das WebUi ist abrufbar.
Software Version:
3.45.5.20190330
Die Hilfeseite der Weboberfläche gibt eine SN aus und unter "Geräte" erscheinen
HM-RCV-50 und HmIP-RCV-50
Somit gehe ich zumindest von einer intakten CCU/Zentrale aus.
Leider klappt das anlernen überhaupt nicht. Der Fensterkontakt hat die Typenbezeichnung "BC-SC-Rd-WM-MD" und hat das Funkmodul (wenn ich das richtige verstanden habe) "TRX868-TFK-TI" und sollte sich demnach an die o.g. CCU anmelden können.
Nun stellt sich allerdings schon die Frage nach welchem "Anlerntyp" die Registrierung erfolgen soll. Sämtliche Versuche (Direkt, Internet) schlugen fehl. Das Anlernen mit SN ist nicht möglich da mir nicht bekannt..
Wie kann ich einen Hardwaredefekt ausschließen?
Dmesg spuckt folgenden Code aus:
Code: Alles auswählen
# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.30 (damato@bilbo) (gcc version 7.4.0 (Buildroot 2019.02-01839-g1813daec)) #1 SMP PREEMPT Fri Mar 29 14:37:23 CET 2019
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x3d800000
[ 0.000000] On node 0 totalpages: 253952
[ 0.000000] Normal zone: 2232 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 253952 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4c0 with crng_init=0
[ 0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s41100 r8192 d24436 u73728
[ 0.000000] pcpu-alloc: s41100 r8192 d24436 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 251720
[ 0.000000] Kernel command line: dwc_otg.lpm_enable=0 sdhci_bcm2708.enable_llm=0 console=tty2 kgdboc=tty2 scandelay=5 root=PARTUUID=deedbeef-02 ro noswap rootfstype=ext4 elevator=deadline fsck.repair=yes lapic rootwait rootdelay=5 consoleblank=120 logo.nologo quiet loglevel=0 usb-storage.quirks= 8250.nr_uarts=1 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 empty
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 1015808 bytes of page_ext
[ 0.000000] Memory: 982768K/1015808K available (8192K kernel code, 590K rwdata, 2180K rodata, 1024K init, 828K bss, 24848K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbe800000 - 0xff800000 (1040 MB)
lowmem : 0x80000000 - 0xbe000000 ( 992 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x(ptrval) - 0x(ptrval) (9184 kB)
.init : 0x(ptrval) - 0x(ptrval) (1024 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 591 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 829 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 27095 entries in 80 pages
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000020] Switching to timer-based delay loop, resolution 52ns
[ 0.000291] Console: colour dummy device 80x30
[ 0.000314] console [tty2] enabled
[ 0.000359] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.000379] pid_max: default: 32768 minimum: 301
[ 0.000552] Security Framework initialized
[ 0.000563] Yama: becoming mindful.
[ 0.000805] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000824] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001951] Disabling memory control group subsystem
[ 0.002033] CPU: Testing write buffer coherency: ok
[ 0.002551] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.024093] Setting up static identity map for 0x100000 - 0x10003c
[ 0.032082] rcu: Hierarchical SRCU implementation.
[ 0.048158] smp: Bringing up secondary CPUs ...
[ 0.080682] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.112785] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.144916] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.145083] smp: Brought up 1 node, 4 CPUs
[ 0.145096] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.145103] CPU: All CPU(s) started in HYP mode.
[ 0.145109] CPU: Virtualization extensions available.
[ 0.146083] devtmpfs: initialized
[ 0.159175] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.159546] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.159567] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.160187] pinctrl core: initialized pinctrl subsystem
[ 0.161223] NET: Registered protocol family 16
[ 0.166584] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.171852] cpuidle: using governor ladder
[ 0.171892] cpuidle: using governor menu
[ 0.172846] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.172855] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.175798] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.213864] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.215617] SCSI subsystem initialized
[ 0.215881] usbcore: registered new interface driver usbfs
[ 0.215942] usbcore: registered new interface driver hub
[ 0.216053] usbcore: registered new device driver usb
[ 0.221017] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-22 19:48, variant start
[ 0.225111] raspberrypi-firmware soc:firmware: Firmware hash is 23cbb8eff319a0b12cb2bef64c1c13c01583bcda
[ 0.229976] NetLabel: Initializing
[ 0.229985] NetLabel: domain hash size = 128
[ 0.229993] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.230082] NetLabel: unlabeled traffic allowed by default
[ 0.231097] clocksource: Switched to clocksource arch_sys_counter
[ 0.343146] VFS: Disk quotas dquot_6.6.0
[ 0.343250] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.343468] FS-Cache: Loaded
[ 0.343679] CacheFiles: Loaded
[ 0.353488] NET: Registered protocol family 2
[ 0.354368] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.354407] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.354517] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.354704] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.354856] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.354906] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.355237] NET: Registered protocol family 1
[ 0.355937] RPC: Registered named UNIX socket transport module.
[ 0.355945] RPC: Registered udp transport module.
[ 0.355953] RPC: Registered tcp transport module.
[ 0.355960] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.358170] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.361861] Initialise system trusted keyrings
[ 0.362084] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.370593] zbud: loaded
[ 0.372490] FS-Cache: Netfs 'nfs' registered for caching
[ 0.373093] NFS: Registering the id_resolver key type
[ 0.373126] Key type id_resolver registered
[ 0.373134] Key type id_legacy registered
[ 0.373152] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.375947] Key type asymmetric registered
[ 0.375957] Asymmetric key parser 'x509' registered
[ 0.376013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.376200] io scheduler noop registered
[ 0.376210] io scheduler deadline registered (default)
[ 0.376405] io scheduler cfq registered
[ 0.376415] io scheduler mq-deadline registered (default)
[ 0.376424] io scheduler kyber registered
[ 0.379491] BCM2708FB: allocated DMA memory 0xfd840000
[ 0.379544] BCM2708FB: allocated DMA channel 0
[ 0.388972] Console: switching to colour frame buffer device 90x30
[ 0.395228] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.397116] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.397326] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.397885] vc-sm: Videocore shared memory driver
[ 0.398258] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.410134] brd: module loaded
[ 0.421729] loop: module loaded
[ 0.421746] Loading iSCSI transport class v2.0-870.
[ 0.426519] libphy: Fixed MDIO Bus: probed
[ 0.426628] usbcore: registered new interface driver lan78xx
[ 0.426692] usbcore: registered new interface driver smsc95xx
[ 0.426709] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.427022] dwc_otg 3f980000.usb: base=(ptrval)
[ 0.627238] Core Release: 2.80a
[ 0.627249] Setting default values for core params
[ 0.627276] Finished setting default values for core params
[ 0.827543] Using Buffer DMA mode
[ 0.827552] Periodic Transfer Interrupt Enhancement - disabled
[ 0.827559] Multiprocessor Interrupt Enhancement - disabled
[ 0.827568] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.827579] Dedicated Tx FIFOs mode
[ 0.828043] WARN::dwc_otg_hcd_init:1049: FIQ DMA bounce buffers: virt = bd854000 dma = 0xfd854000 len=9024
[ 0.828071] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.828080] dwc_otg: Microframe scheduler enabled
[ 0.828138] WARN::hcd_init_fiq:457: FIQ on core 1
[ 0.828152] WARN::hcd_init_fiq:458: FIQ ASM at 8066c1bc length 36
[ 0.828167] WARN::hcd_init_fiq:484: MPHI regs_base at f0006000
[ 0.828237] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.828269] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.828306] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 0.828355] Init: Port Power? op_state=1
[ 0.828362] Init: Power Port (0)
[ 0.828644] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.828657] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.828667] usb usb1: Product: DWC OTG Controller
[ 0.828678] usb usb1: Manufacturer: Linux 4.19.30 dwc_otg_hcd
[ 0.828688] usb usb1: SerialNumber: 3f980000.usb
[ 0.829345] hub 1-0:1.0: USB hub found
[ 0.829397] hub 1-0:1.0: 1 port detected
[ 0.830064] dwc_otg: FIQ enabled
[ 0.830072] dwc_otg: NAK holdoff enabled
[ 0.830079] dwc_otg: FIQ split-transaction FSM enabled
[ 0.830092] Module dwc_common_port init
[ 0.830363] usbcore: registered new interface driver usb-storage
[ 0.830658] mousedev: PS/2 mouse device common for all mice
[ 0.831699] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.832169] bcm2835-cpufreq: min=600000 max=1400000
[ 0.832752] sdhci: Secure Digital Host Controller Interface driver
[ 0.832759] sdhci: Copyright(c) Pierre Ossman
[ 0.833184] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ 0.833631] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.833768] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.837903] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.837946] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.838026] usbcore: registered new interface driver usbhid
[ 0.838029] usbhid: USB HID core driver
[ 0.838512] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.839765] [vc_sm_connected_init]: start
[ 0.850722] [vc_sm_connected_init]: end - returning 0
[ 0.852336] NET: Registered protocol family 17
[ 0.852439] Key type dns_resolver registered
[ 0.853184] Registering SWP/SWPB emulation handler
[ 0.853907] registered taskstats version 1
[ 0.853927] Loading compiled-in X.509 certificates
[ 0.864577] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 53, base_baud = 31250000) is a 16550
[ 0.865729] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.865740] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.892061] sdhost: log_buf @ (ptrval) (fd853000)
[ 0.920627] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.922247] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.923873] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.926772] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.942334] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.944260] of_cfs_init
[ 0.944319] of_cfs_init: OK
[ 0.962996] Waiting 5 sec before mounting root device...
[ 0.998926] random: fast init done
[ 1.007446] mmc1: new high speed SDIO card at address 0001
[ 1.031651] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.035163] Indeed it is in host mode hprt0 = 00021501
[ 1.047137] mmc0: new high speed SDXC card at address aaaa
[ 1.047780] mmcblk0: mmc0:aaaa SB128 119 GiB
[ 1.099264] mmcblk0: p1 p2 p3
[ 1.223155] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.223278] Indeed it is in host mode hprt0 = 00001101
[ 1.431412] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 1.431425] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.432072] hub 1-1:1.0: USB hub found
[ 1.432179] hub 1-1:1.0: 4 ports detected
[ 1.719146] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.819377] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 1.819391] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.819930] hub 1-1.1:1.0: USB hub found
[ 1.820019] hub 1-1.1:1.0: 3 ports detected
[ 2.173029] dwc_otg_handle_wakeup_detected_intr lxstate = 2
[ 2.615145] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
[ 2.715517] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[ 2.715531] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.979656] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[ 2.980626] libphy: lan78xx-mdiobus: probed
[ 2.991472] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
[ 6.124320] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.124380] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 6.132049] devtmpfs: mounted
[ 6.138816] Freeing unused kernel memory: 1024K
[ 6.139238] Run /sbin/init as init process
[ 6.736273] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[ 6.762902] EXT4-fs (mmcblk0p3): mounted filesystem with journalled data mode. Opts: data=journal
[ 6.980852] i2c /dev entries driver
[ 7.016655] rtc_rx8130: loading out-of-tree module taints kernel.
[ 7.021700] rtc-ds1307 1-0032: registered as rtc0
[ 7.021867] i2c i2c-1: new_device: Instantiated device rx8130 at 0x32
[ 7.383326] tun: Universal TUN/TAP device driver, 1.6
[ 7.499429] udevd[223]: starting version 3.2.7
[ 7.502291] random: udevd: uninitialized urandom read (16 bytes read)
[ 7.505298] random: udevd: uninitialized urandom read (16 bytes read)
[ 7.505429] random: udevd: uninitialized urandom read (16 bytes read)
[ 7.509929] udevd[223]: specified group 'kvm' unknown
[ 7.532286] udevd[227]: starting eudev-3.2.7
[ 7.537273] udevd[227]: specified group 'kvm' unknown
[ 7.626477] pl011_raw_uart 3f201000.serial: No valid reset pin configured in device tree
[ 7.626617] pl011_raw_uart 3f201000.serial: Initialized pl011 device; mapbase=0x3f201000; irq=81; clockrate=47999625
[ 7.639648] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.640689] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 7.640701] [vc_sm_connected_init]: start
[ 7.643985] media: Linux media interface: v0.10
[ 7.644531] [vc_sm_connected_init]: installed successfully
[ 7.682112] videodev: Linux video capture interface: v2.00
[ 7.745579] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.758205] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.759304] pinctrl-bcm2835 3f200000.gpio: pin gpio18 already requested by leds; cannot claim for 3f203000.i2s
[ 7.759314] pinctrl-bcm2835 3f200000.gpio: pin-18 (3f203000.i2s) status -22
[ 7.759321] pinctrl-bcm2835 3f200000.gpio: could not request pin 18 (gpio18) from group gpio18 on device pinctrl-bcm2835
[ 7.759326] bcm2835-i2s 3f203000.i2s: Error applying setting, reverse things back
[ 7.759348] bcm2835-i2s: probe of 3f203000.i2s failed with error -22
[ 7.767995] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.773177] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.774552] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.774561] cfg80211: failed to load regulatory.db
[ 7.858947] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 7.863282] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 7.863529] usbcore: registered new interface driver brcmfmac
[ 8.104841] random: crng init done
[ 8.104853] random: 4 urandom warning(s) missed due to ratelimiting
[ 8.110317] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 8.124159] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 22.312129] NET: Registered protocol family 10
[ 22.314501] Segment Routing with IPv6
[ 34.462653] eq3loop: created slave mmd_hmip
[ 34.463246] eq3loop: created slave mmd_bidcos
[ 36.620514] eq3loop: eq3loop_open_slave() mmd_bidcos
[ 49.203023] eq3loop: eq3loop_open_slave() mmd_hmip
[ 49.203366] eq3loop: eq3loop_close_slave() mmd_hmip
[ 49.207774] eq3loop: eq3loop_open_slave() mmd_hmip
[ 49.208430] eq3loop: eq3loop_close_slave() mmd_hmip
[ 49.227300] eq3loop: eq3loop_open_slave() mmd_hmip
[ 121.822258] raspberrypi-firmware soc:firmware: Request 0x00040002 returned status 0x80000001
[ 121.822280] bcm2708_fb soc:fb: bcm2708_fb_blank(1) failed: -22
#
