RaspberryMatic 3.45.7.20190504 – Erfahrungsberichte

Black · Beitrag von **Black** » 04.05.2019, 22:51

Die beiden neuen Funktionen hab ich grade auch schon im SDV in den Highlighter und den vervollständiger Eingebaut.
Kommen in der nächsten Version

Black

Raspihausfan_1 · Beitrag von **Raspihausfan_1** » 04.05.2019, 23:06

Mit Firefox in ca. 6 min hochgeladen, Installation noch einmal ca. 6 min. Läuft "out of the Box", bisher kein Problem festgestellt.
Und ein "Träumchen": Filter bleiben gesetzt, Darstellung gesetztes Filter im Spaltenkopf in rot. Klasse!

tloeffel · Beitrag von **tloeffel** » 04.05.2019, 23:09

Hallo Zusammen,

ne Telekom SVDSL 250

.

Aber trotzdem langsam

.

Gruß Thomas

Psi · Beitrag von **Psi** » 04.05.2019, 23:10

Danke danke. Freut mich, dass sich die grauen Haare gelohnt haben

jmaus · Beitrag von **jmaus** » 04.05.2019, 23:28

Psi hat geschrieben: ↑
04.05.2019, 23:10
Danke danke. Freut mich, dass sich die grauen Haare gelohnt haben

Auch hier noch einmal meinen expliziten Dank an dich für das beisteuern des WebUI-Patches dazu! Das ist wirklich ein sehr gutes Beispiel wie OpenSource und speziell RaspberryMatic als Community-Projekt funktionieren kann. Und ich hoffe es kommen noch mehr solcher WebUI Anpassungen/Patches - vielleicht sogar nochmal von dir? Ideen / Tickets mit Ideen für Verbesserungen gibt es im RaspberryMatic Projekt bereits ausreichend:

https://github.com/jens-maus/RaspberryMatic/projects/3

nicolas-eric · Beitrag von **nicolas-eric** » 04.05.2019, 23:35

hobbyquaker hat geschrieben: ↑
04.05.2019, 22:41
Lasst mich raten: Ihr habt kein Internet via (V)DSL von der Telekom sondern einen Kabelanschluss?

Mal die Stoppuhr am Handy geschnappt.
Download in 26 Sekunden "trotz" 500MBit/s VF-Kabel.

Image auf SD Karte gepackt in 31 Sekunden.
In den Raspi gesteckt, gestartet, sehr großes Backup eingespielt und neugestartet 5:41 Minuten.
Es läuft wie ich das sehe alles wie gewünscht.
Super! Danke Jens!
Morgen ist dann das überfällige RedMatic Update dran.

JPS · Beitrag von **JPS** » 05.05.2019, 00:03

Installation und erster Test auf dem Tinkerboard S ohne Probleme. Die Sticky-Filter sind super, danke!

tloeffel · Beitrag von **tloeffel** » 05.05.2019, 00:28

Hallo Jens,

hattest Recht

. Jetzt ist das Update im WebUI sichtbar.
Danke für die schnelle Antwort.

Gruß Thomas

klana · Beitrag von **klana** » 05.05.2019, 07:39

Guten Morgen zusammen,

Leider scheint bei mir das Update auf dem TinkerBoard S nicht zu funktionieren.
Die Version vom 30.03. lief bis auf die öfters auftretenden WLAN Warnungen ruhig und ohne Absturz.

Ich habe gestern Abend folgendes ausgeführt:

1. Aktuelles Backup gemacht
2. Firmwareupdate über WebUI durchgeführt über den Safari Browser
3. nach dem blinkte die normalerweise blau leuchtende LED in einem schnellen Weißton.
Die webUI war erreichbar und zeigte auch die neue Firmwareversion vom 4.5. an.
Allerdings wurde kein Programm ausgeführt. Weder die normalerweise beim Reboot ausgeführtem, noch irgend ein anderes,
wie z.B. die Fensterkontakt Programme.
Die Zusatzprogramm wie CuXd endeten beim Aufruf mit dem Fehler „Bad Gateway“
4. Nach 1 Stunde immer noch nichts.

5.jetzt ein älteres Backup eingespielt
Ergebnis wie oben

6. jetzt den TB direkt per USB an den iMac angeschlossen und per Balena die Firmware ohne Fehler aufgespielt.
Backup mit Google Chrome per WebUI eingespielt
7. Ergebnis wie oben

8. noch ca. 1 Stunde gewartet , aber keine Besserung.

9. jetzt mittels Safari über das Recovery die Firmware eingespielt und das Backup noch mit Safari hinterher.
Ergebnis wie oben

10. um kurz von 3 Uhr heute morgen, dann zurück zur Version vom 30.03. und dem letzten Backup.
Ergebnis: Alles läuft sofort wieder und keine Fehlermeldungen mehr vorhanden.

Ich habe zwischendurch auch die aktuelle Firmwareversion mit dem Google Chrome noch mal neu heruntergeladen,
Damit ich einen Downloadfehler ausschließen konnte.

PS: Bezgl. der vielen Meldungen im Log: Ich habe über WLAN noch nie etwas gemacht.
Das TinkerBoard hängt per LAN Kabel dran.

Hier mal ein paar Logs der Fehlversuche

Code: Alles auswählen

  May  4 23:52:09 homematic-raspi daemon.notice wpa_supplicant[7725]: ctrl_iface exists and seems to be in use - cannot override it
May  4 23:52:09 homematic-raspi daemon.notice wpa_supplicant[7725]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  4 23:52:09 homematic-raspi daemon.err wpa_supplicant[7725]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  4 23:52:09 homematic-raspi daemon.notice wpa_supplicant[7725]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  4 23:52:09 homematic-raspi syslog.info syslogd exiting
May  4 23:52:09 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  4 23:52:09 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  4 23:52:09 homematic-raspi daemon.err udhcpc[7542]: received SIGTERM
May  4 23:52:09 homematic-raspi daemon.err udhcpc[7743]: started, v1.29.3
May  4 23:52:09 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:10 homematic-raspi daemon.info cuxd[7762]: move '/var/log/messages.0' -> '/media/usb1/syslogarchive/messages.20190504-2352'
May  4 23:52:10 homematic-raspi user.info firewall: configuration set
May  4 23:52:13 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:16 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:19 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:22 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:25 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:28 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:31 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:34 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:34 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  4 23:52:37 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:40 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:43 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:46 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:49 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:52 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:52 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  4 23:52:52 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  4 23:52:52 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  4 23:52:52 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  4 23:52:52 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  4 23:52:52 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  4 23:52:52 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  4 23:52:55 homematic-raspi daemon.err udhcpc[7743]: sending discover
May  4 23:52:57 homematic-raspi user.notice rfkill: unblock set for type wlan
May  4 23:52:57 homematic-raspi daemon.notice wpa_supplicant[7927]: Successfully initialized wpa_supplicant
May  4 23:52:57 homematic-raspi daemon.notice wpa_supplicant[7927]: ctrl_iface exists and seems to be in use - cannot override it
May  4 23:52:57 homematic-raspi daemon.notice wpa_supplicant[7927]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  4 23:52:57 homematic-raspi daemon.err wpa_supplicant[7927]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  4 23:52:57 homematic-raspi daemon.notice wpa_supplicant[7927]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  4 23:52:57 homematic-raspi syslog.info syslogd exiting
May  4 23:52:57 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  4 23:52:57 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  4 23:52:57 homematic-raspi daemon.err udhcpc[7743]: received SIGTERM
May  4 23:52:57 homematic-raspi daemon.err udhcpc[7945]: started, v1.29.3
May  4 23:52:58 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:52:58 homematic-raspi user.info firewall: configuration set
May  4 23:53:01 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:03 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  4 23:53:03 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:53:03 homematic-raspi user.warn kernel: [ 1502.957152] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:53:03 homematic-raspi user.warn kernel: [ 1503.041220] RTL8723BS: start auth
May  4 23:53:03 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:53:03 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=8 duration=90 reason=CONN_FAILED
May  4 23:53:03 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:53:04 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:07 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:10 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:13 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:16 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:19 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:22 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:22 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  4 23:53:25 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:28 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:31 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:34 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:37 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:40 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:40 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  4 23:53:40 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  4 23:53:40 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  4 23:53:40 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  4 23:53:40 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  4 23:53:40 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  4 23:53:40 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  4 23:53:40 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  4 23:53:43 homematic-raspi daemon.err udhcpc[7945]: sending discover
May  4 23:53:45 homematic-raspi user.notice rfkill: unblock set for type wlan
May  4 23:53:45 homematic-raspi daemon.notice wpa_supplicant[8135]: Successfully initialized wpa_supplicant
May  4 23:53:45 homematic-raspi daemon.notice wpa_supplicant[8135]: ctrl_iface exists and seems to be in use - cannot override it
May  4 23:53:45 homematic-raspi daemon.notice wpa_supplicant[8135]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  4 23:53:45 homematic-raspi daemon.err wpa_supplicant[8135]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  4 23:53:45 homematic-raspi daemon.notice wpa_supplicant[8135]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  4 23:53:45 homematic-raspi syslog.info syslogd exiting
May  4 23:53:45 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  4 23:53:45 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  4 23:53:46 homematic-raspi daemon.err udhcpc[7945]: received SIGTERM
May  4 23:53:46 homematic-raspi daemon.err udhcpc[8153]: started, v1.29.3
May  4 23:53:46 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:53:46 homematic-raspi user.info firewall: configuration set
May  4 23:53:49 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:53:52 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:53:55 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:53:58 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:54:01 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:54:04 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:54:07 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:54:10 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:54:10 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  4 23:54:13 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:54:16 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:54:19 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:54:22 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:54:25 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:54:28 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:54:28 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  4 23:54:28 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  4 23:54:28 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  4 23:54:28 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  4 23:54:28 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  4 23:54:28 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  4 23:54:28 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  4 23:54:31 homematic-raspi daemon.err udhcpc[8153]: sending discover
May  4 23:54:33 homematic-raspi user.notice rfkill: unblock set for type wlan
May  4 23:54:33 homematic-raspi daemon.notice wpa_supplicant[8330]: Successfully initialized wpa_supplicant
May  4 23:54:33 homematic-raspi daemon.notice wpa_supplicant[8330]: ctrl_iface exists and seems to be in use - cannot override it
May  4 23:54:33 homematic-raspi daemon.notice wpa_supplicant[8330]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  4 23:54:33 homematic-raspi daemon.err wpa_supplicant[8330]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  4 23:54:33 homematic-raspi daemon.notice wpa_supplicant[8330]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  4 23:54:34 homematic-raspi syslog.info syslogd exiting
May  4 23:54:34 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  4 23:54:34 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  4 23:54:34 homematic-raspi daemon.err udhcpc[8153]: received SIGTERM
May  4 23:54:34 homematic-raspi daemon.err udhcpc[8348]: started, v1.29.3
May  4 23:54:34 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:54:34 homematic-raspi user.info firewall: configuration set
May  4 23:54:35 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  4 23:54:35 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:54:35 homematic-raspi user.warn kernel: [ 1595.525274] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:54:37 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:54:40 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:54:41 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:54:41 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=9 duration=90 reason=CONN_FAILED
May  4 23:54:41 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:54:43 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:54:46 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:54:49 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:54:52 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:54:55 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:54:58 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:54:58 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  4 23:55:01 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:55:04 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:55:07 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:55:10 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:55:13 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:55:16 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:55:16 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  4 23:55:16 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  4 23:55:16 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  4 23:55:16 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  4 23:55:16 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  4 23:55:16 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  4 23:55:16 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  4 23:55:16 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  4 23:55:19 homematic-raspi daemon.err udhcpc[8348]: sending discover
May  4 23:55:21 homematic-raspi user.notice rfkill: unblock set for type wlan
May  4 23:55:21 homematic-raspi daemon.notice wpa_supplicant[8540]: Successfully initialized wpa_supplicant
May  4 23:55:22 homematic-raspi daemon.notice wpa_supplicant[8540]: ctrl_iface exists and seems to be in use - cannot override it
May  4 23:55:22 homematic-raspi daemon.notice wpa_supplicant[8540]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  4 23:55:22 homematic-raspi daemon.err wpa_supplicant[8540]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  4 23:55:22 homematic-raspi daemon.notice wpa_supplicant[8540]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  4 23:55:22 homematic-raspi syslog.info syslogd exiting
May  4 23:55:22 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  4 23:55:22 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  4 23:55:22 homematic-raspi daemon.err udhcpc[8348]: received SIGTERM
May  4 23:55:22 homematic-raspi daemon.err udhcpc[8558]: started, v1.29.3
May  4 23:55:22 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:55:22 homematic-raspi user.info firewall: configuration set
May  4 23:55:25 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:55:28 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:55:31 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:55:34 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:55:37 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:55:40 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:55:43 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:55:46 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:55:46 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  4 23:55:49 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:55:52 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:55:55 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:55:58 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:56:01 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:56:04 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:56:04 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  4 23:56:04 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  4 23:56:04 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  4 23:56:04 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  4 23:56:04 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  4 23:56:04 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  4 23:56:04 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  4 23:56:07 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:56:10 homematic-raspi user.notice rfkill: unblock set for type wlan
May  4 23:56:10 homematic-raspi daemon.notice wpa_supplicant[8750]: Successfully initialized wpa_supplicant
May  4 23:56:10 homematic-raspi daemon.notice wpa_supplicant[8750]: ctrl_iface exists and seems to be in use - cannot override it
May  4 23:56:10 homematic-raspi daemon.notice wpa_supplicant[8750]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  4 23:56:10 homematic-raspi daemon.err wpa_supplicant[8750]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  4 23:56:10 homematic-raspi daemon.notice wpa_supplicant[8750]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  4 23:56:10 homematic-raspi syslog.info syslogd exiting
May  4 23:56:10 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  4 23:56:10 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  4 23:56:10 homematic-raspi daemon.err udhcpc[8558]: sending discover
May  4 23:56:10 homematic-raspi daemon.err udhcpc[8768]: started, v1.29.3
May  4 23:56:10 homematic-raspi daemon.err udhcpc[8558]: received SIGTERM
May  4 23:56:10 homematic-raspi daemon.err udhcpc[8768]: sending discover
May  4 23:56:10 homematic-raspi user.info firewall: configuration set
May  4 23:56:13 homematic-raspi daemon.err udhcpc[8768]: sending discover
May  4 23:56:13 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  4 23:56:13 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:56:14 homematic-raspi user.warn kernel: [ 1694.164077] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:56:16 homematic-raspi daemon.err udhcpc[8768]: sending discover
May  4 23:56:19 homematic-raspi daemon.err udhcpc[8768]: sending discover
May  4 23:56:20 homematic-raspi daemon.err udhcpc[8768]: received SIGTERM
May  4 23:56:20 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:56:20 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=10 duration=90 reason=CONN_FAILED
May  4 23:56:20 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:56:21 homematic-raspi user.info firewall: configuration set
May  4 23:56:38 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  4 23:56:38 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  4 23:56:38 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  4 23:56:38 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  4 23:56:38 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  4 23:56:38 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  4 23:56:38 homematic-raspi daemon.notice wpa_supplicant[6401]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  4 23:56:38 homematic-raspi daemon.notice wpa_supplicant[6401]: wlan0: CTRL-EVENT-TERMINATING
May  4 23:56:39 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  4 23:56:44 homematic-raspi user.notice rfkill: unblock set for type wlan
May  4 23:56:44 homematic-raspi daemon.notice wpa_supplicant[9095]: Successfully initialized wpa_supplicant
May  4 23:56:44 homematic-raspi syslog.info syslogd exiting
May  4 23:56:44 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  4 23:56:44 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  4 23:56:44 homematic-raspi daemon.err udhcpc[9114]: started, v1.29.3
May  4 23:56:44 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:56:46 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:56:46 homematic-raspi user.warn kernel: [ 1726.337934] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:56:47 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:56:50 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:56:52 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:56:52 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:56:53 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:56:53 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:56:53 homematic-raspi user.warn kernel: [ 1733.324633] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:56:53 homematic-raspi user.warn kernel: [ 1733.391304] RTL8723BS: start auth
May  4 23:56:54 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:56:54 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:56:56 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:56:56 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:56:56 homematic-raspi user.warn kernel: [ 1736.190256] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:56:56 homematic-raspi user.warn kernel: [ 1736.303817] RTL8723BS: start auth
May  4 23:56:56 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:56:56 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:56:58 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:56:58 homematic-raspi user.warn kernel: [ 1737.983204] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:56:58 homematic-raspi user.warn kernel: [ 1738.614934] RTL8723BS: start auth
May  4 23:56:59 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:57:00 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:57:00 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:57:02 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:57:02 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:57:02 homematic-raspi user.warn kernel: [ 1742.297143] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:57:02 homematic-raspi user.warn kernel: [ 1742.345146] RTL8723BS: start auth
May  4 23:57:02 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:57:02 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=1 duration=10 reason=CONN_FAILED
May  4 23:57:02 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:57:05 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:57:08 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:57:09 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  4 23:57:11 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:57:13 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  4 23:57:13 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:57:13 homematic-raspi user.warn kernel: [ 1753.478232] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:57:14 homematic-raspi user.warn kernel: [ 1753.973071] RTL8723BS: start auth
May  4 23:57:14 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:57:15 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:57:15 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=2 duration=20 reason=CONN_FAILED
May  4 23:57:15 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:57:17 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:57:20 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:57:23 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:57:26 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:57:26 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  4 23:57:26 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  4 23:57:26 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  4 23:57:26 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  4 23:57:26 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  4 23:57:27 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  4 23:57:27 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  4 23:57:29 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:57:32 homematic-raspi user.notice rfkill: unblock set for type wlan
May  4 23:57:32 homematic-raspi daemon.notice wpa_supplicant[9171]: Successfully initialized wpa_supplicant
May  4 23:57:32 homematic-raspi daemon.notice wpa_supplicant[9171]: ctrl_iface exists and seems to be in use - cannot override it
May  4 23:57:32 homematic-raspi daemon.notice wpa_supplicant[9171]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  4 23:57:32 homematic-raspi daemon.err wpa_supplicant[9171]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  4 23:57:32 homematic-raspi daemon.notice wpa_supplicant[9171]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  4 23:57:32 homematic-raspi syslog.info syslogd exiting
May  4 23:57:32 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  4 23:57:32 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  4 23:57:32 homematic-raspi daemon.err udhcpc[9114]: sending discover
May  4 23:57:32 homematic-raspi daemon.err udhcpc[9189]: started, v1.29.3
May  4 23:57:32 homematic-raspi daemon.err udhcpc[9189]: sending discover
May  4 23:57:32 homematic-raspi daemon.err udhcpc[9114]: received SIGTERM
May  4 23:57:33 homematic-raspi user.info firewall: configuration set
May  4 23:57:35 homematic-raspi daemon.err udhcpc[9189]: sending discover
May  4 23:57:36 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  4 23:57:36 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:57:37 homematic-raspi user.warn kernel: [ 1777.118920] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:57:37 homematic-raspi user.warn kernel: [ 1777.160748] RTL8723BS: start auth
May  4 23:57:37 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:57:37 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=3 duration=30 reason=CONN_FAILED
May  4 23:57:37 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:57:38 homematic-raspi daemon.err udhcpc[9189]: sending discover
May  4 23:57:41 homematic-raspi daemon.err udhcpc[9189]: sending discover
May  4 23:57:42 homematic-raspi daemon.err udhcpc[9189]: received SIGTERM
May  4 23:57:43 homematic-raspi user.info firewall: configuration set
May  4 23:58:01 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  4 23:58:01 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  4 23:58:01 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  4 23:58:01 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  4 23:58:01 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  4 23:58:01 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  4 23:58:01 homematic-raspi daemon.notice wpa_supplicant[9096]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  4 23:58:01 homematic-raspi daemon.notice wpa_supplicant[9096]: wlan0: CTRL-EVENT-TERMINATING
May  4 23:58:01 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  4 23:58:06 homematic-raspi user.notice rfkill: unblock set for type wlan
May  4 23:58:06 homematic-raspi daemon.notice wpa_supplicant[9515]: Successfully initialized wpa_supplicant
May  4 23:58:06 homematic-raspi syslog.info syslogd exiting
May  4 23:58:06 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  4 23:58:06 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  4 23:58:06 homematic-raspi daemon.err udhcpc[9534]: started, v1.29.3
May  4 23:58:06 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:08 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:58:08 homematic-raspi user.warn kernel: [ 1808.020931] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:58:08 homematic-raspi user.warn kernel: [ 1808.085398] RTL8723BS: start auth
May  4 23:58:08 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:08 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:09 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:58:09 homematic-raspi user.warn kernel: [ 1808.895588] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:58:09 homematic-raspi user.warn kernel: [ 1808.965155] RTL8723BS: start auth
May  4 23:58:09 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:10 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:10 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:12 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:58:12 homematic-raspi user.warn kernel: [ 1812.090658] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:58:12 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:12 homematic-raspi user.warn kernel: [ 1812.386538] RTL8723BS: start auth
May  4 23:58:12 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:12 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:14 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:58:14 homematic-raspi user.warn kernel: [ 1814.088542] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:58:14 homematic-raspi user.warn kernel: [ 1814.186293] RTL8723BS: start auth
May  4 23:58:15 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:15 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:15 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:18 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:58:18 homematic-raspi user.warn kernel: [ 1818.217701] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:58:18 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:18 homematic-raspi user.warn kernel: [ 1818.325138] RTL8723BS: start auth
May  4 23:58:18 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:18 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=1 duration=10 reason=CONN_FAILED
May  4 23:58:18 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:21 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:24 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:27 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:29 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  4 23:58:29 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:58:29 homematic-raspi user.warn kernel: [ 1829.466420] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:58:29 homematic-raspi user.warn kernel: [ 1829.648781] RTL8723BS: start auth
May  4 23:58:30 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:31 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:31 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=2 duration=20 reason=CONN_FAILED
May  4 23:58:31 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:31 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  4 23:58:33 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:36 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:39 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:42 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:45 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:48 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:49 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  4 23:58:49 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  4 23:58:49 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  4 23:58:49 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  4 23:58:49 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  4 23:58:49 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  4 23:58:49 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  4 23:58:51 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:52 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  4 23:58:52 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:58:52 homematic-raspi user.warn kernel: [ 1852.600726] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:58:52 homematic-raspi user.warn kernel: [ 1852.628829] RTL8723BS: start auth
May  4 23:58:52 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:52 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=3 duration=30 reason=CONN_FAILED
May  4 23:58:52 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:58:54 homematic-raspi user.notice rfkill: unblock set for type wlan
May  4 23:58:54 homematic-raspi daemon.notice wpa_supplicant[9593]: Successfully initialized wpa_supplicant
May  4 23:58:54 homematic-raspi daemon.notice wpa_supplicant[9593]: ctrl_iface exists and seems to be in use - cannot override it
May  4 23:58:54 homematic-raspi daemon.notice wpa_supplicant[9593]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  4 23:58:54 homematic-raspi daemon.err wpa_supplicant[9593]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  4 23:58:54 homematic-raspi daemon.notice wpa_supplicant[9593]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  4 23:58:54 homematic-raspi syslog.info syslogd exiting
May  4 23:58:54 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  4 23:58:54 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  4 23:58:54 homematic-raspi daemon.err udhcpc[9534]: sending discover
May  4 23:58:54 homematic-raspi daemon.err udhcpc[9611]: started, v1.29.3
May  4 23:58:54 homematic-raspi daemon.err udhcpc[9611]: sending discover
May  4 23:58:54 homematic-raspi daemon.err udhcpc[9534]: received SIGTERM
May  4 23:58:55 homematic-raspi user.info firewall: configuration set
May  4 23:58:57 homematic-raspi daemon.err udhcpc[9611]: sending discover
May  4 23:59:00 homematic-raspi daemon.err udhcpc[9611]: sending discover
May  4 23:59:03 homematic-raspi daemon.err udhcpc[9611]: sending discover
May  4 23:59:04 homematic-raspi daemon.err udhcpc[9611]: received SIGTERM
May  4 23:59:05 homematic-raspi user.info firewall: configuration set
May  4 23:59:23 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  4 23:59:23 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  4 23:59:23 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  4 23:59:23 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  4 23:59:23 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  4 23:59:23 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  4 23:59:23 homematic-raspi daemon.notice wpa_supplicant[9516]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  4 23:59:23 homematic-raspi daemon.notice wpa_supplicant[9516]: wlan0: CTRL-EVENT-TERMINATING
May  4 23:59:23 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  4 23:59:28 homematic-raspi user.notice rfkill: unblock set for type wlan
May  4 23:59:28 homematic-raspi daemon.notice wpa_supplicant[9930]: Successfully initialized wpa_supplicant
May  4 23:59:28 homematic-raspi syslog.info syslogd exiting
May  4 23:59:28 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  4 23:59:28 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  4 23:59:28 homematic-raspi daemon.err udhcpc[9949]: started, v1.29.3
May  4 23:59:28 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  4 23:59:30 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:59:30 homematic-raspi user.warn kernel: [ 1890.332965] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:59:30 homematic-raspi user.warn kernel: [ 1890.617976] RTL8723BS: start auth
May  4 23:59:30 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:59:30 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:59:31 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:59:31 homematic-raspi user.warn kernel: [ 1891.420671] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:59:31 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  4 23:59:31 homematic-raspi user.warn kernel: [ 1891.600023] RTL8723BS: start auth
May  4 23:59:33 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:59:33 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:59:34 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:59:34 homematic-raspi user.warn kernel: [ 1894.410180] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:59:34 homematic-raspi user.warn kernel: [ 1894.508851] RTL8723BS: start auth
May  4 23:59:34 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  4 23:59:35 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:59:35 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:59:37 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:59:37 homematic-raspi user.warn kernel: [ 1897.151491] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:59:37 homematic-raspi user.warn kernel: [ 1897.335697] RTL8723BS: start auth
May  4 23:59:37 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  4 23:59:38 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:59:38 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:59:40 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  4 23:59:40 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:59:40 homematic-raspi user.warn kernel: [ 1900.745215] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:59:41 homematic-raspi user.warn kernel: [ 1900.859544] RTL8723BS: start auth
May  4 23:59:41 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:59:41 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=1 duration=10 reason=CONN_FAILED
May  4 23:59:41 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:59:43 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  4 23:59:46 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  4 23:59:49 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  4 23:59:52 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  4 23:59:52 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  4 23:59:52 homematic-raspi user.warn kernel: [ 1912.013250] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  4 23:59:52 homematic-raspi user.warn kernel: [ 1912.078739] RTL8723BS: start auth
May  4 23:59:52 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  4 23:59:53 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:59:53 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=2 duration=20 reason=CONN_FAILED
May  4 23:59:53 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  4 23:59:53 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  4 23:59:55 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  4 23:59:58 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  5 00:00:00 homematic-raspi daemon.info cuxd[763]: rename '/tmp/devlog.txt' -> '/tmp/devlog.txt.0'
May  5 00:00:00 homematic-raspi daemon.info cuxd[9970]: move '/tmp/devlog.txt.0' -> '/media/usb1/cuxd/devlog/devlog.txt.20190505-0000'
May  5 00:00:02 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  5 00:00:05 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  5 00:00:08 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  5 00:00:11 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  5 00:00:11 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:00:11 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:00:11 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:00:11 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:00:11 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:00:11 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:00:11 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:00:14 homematic-raspi daemon.err udhcpc[9949]: sending discover
May  5 00:00:15 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  5 00:00:15 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:00:15 homematic-raspi user.warn kernel: [ 1935.097147] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:00:15 homematic-raspi user.warn kernel: [ 1935.263680] RTL8723BS: start auth
May  5 00:00:15 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:00:15 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=3 duration=30 reason=CONN_FAILED
May  5 00:00:15 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:00:16 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:00:16 homematic-raspi daemon.notice wpa_supplicant[10047]: Successfully initialized wpa_supplicant
May  5 00:00:16 homematic-raspi daemon.notice wpa_supplicant[10047]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:00:16 homematic-raspi daemon.notice wpa_supplicant[10047]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:00:16 homematic-raspi daemon.err wpa_supplicant[10047]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:00:16 homematic-raspi daemon.notice wpa_supplicant[10047]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:00:16 homematic-raspi syslog.info syslogd exiting
May  5 00:00:16 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:00:16 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:00:16 homematic-raspi daemon.err udhcpc[9949]: received SIGTERM
May  5 00:00:16 homematic-raspi daemon.err udhcpc[10065]: started, v1.29.3
May  5 00:00:17 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:17 homematic-raspi user.info firewall: configuration set
May  5 00:00:20 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:23 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:26 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:29 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:32 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:35 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:38 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:41 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:41 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:00:44 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:47 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:47 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  5 00:00:47 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:00:47 homematic-raspi user.warn kernel: [ 1967.302608] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:00:47 homematic-raspi user.warn kernel: [ 1967.475942] RTL8723BS: start auth
May  5 00:00:49 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:00:49 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=4 duration=60 reason=CONN_FAILED
May  5 00:00:49 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:00:50 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:53 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:56 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:59 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:00:59 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:00:59 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  5 00:00:59 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:00:59 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:00:59 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:00:59 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:00:59 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:00:59 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:01:02 homematic-raspi daemon.err udhcpc[10065]: sending discover
May  5 00:01:04 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:01:04 homematic-raspi daemon.notice wpa_supplicant[10245]: Successfully initialized wpa_supplicant
May  5 00:01:04 homematic-raspi daemon.notice wpa_supplicant[10245]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:01:04 homematic-raspi daemon.notice wpa_supplicant[10245]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:01:04 homematic-raspi daemon.err wpa_supplicant[10245]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:01:04 homematic-raspi daemon.notice wpa_supplicant[10245]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:01:04 homematic-raspi syslog.info syslogd exiting
May  5 00:01:05 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:01:05 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:01:05 homematic-raspi daemon.err udhcpc[10065]: received SIGTERM
May  5 00:01:05 homematic-raspi daemon.err udhcpc[10263]: started, v1.29.3
May  5 00:01:05 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:05 homematic-raspi user.info firewall: configuration set
May  5 00:01:08 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:11 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:14 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:17 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:20 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:23 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:26 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:29 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:29 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:01:32 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:35 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:38 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:41 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:44 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:47 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:47 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:01:47 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:01:47 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:01:47 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:01:47 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:01:47 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:01:47 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:01:50 homematic-raspi daemon.err udhcpc[10263]: sending discover
May  5 00:01:50 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  5 00:01:50 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:01:50 homematic-raspi user.warn kernel: [ 2030.461852] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:01:51 homematic-raspi user.warn kernel: [ 2030.596359] RTL8723BS: start auth
May  5 00:01:51 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:01:51 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=5 duration=60 reason=CONN_FAILED
May  5 00:01:51 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:01:52 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:01:52 homematic-raspi daemon.notice wpa_supplicant[10457]: Successfully initialized wpa_supplicant
May  5 00:01:52 homematic-raspi daemon.notice wpa_supplicant[10457]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:01:52 homematic-raspi daemon.notice wpa_supplicant[10457]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:01:52 homematic-raspi daemon.err wpa_supplicant[10457]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:01:52 homematic-raspi daemon.notice wpa_supplicant[10457]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:01:53 homematic-raspi syslog.info syslogd exiting
May  5 00:01:53 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:01:53 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:01:53 homematic-raspi daemon.err udhcpc[10263]: received SIGTERM
May  5 00:01:53 homematic-raspi daemon.err udhcpc[10475]: started, v1.29.3
May  5 00:01:53 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:01:53 homematic-raspi user.info firewall: configuration set
May  5 00:01:56 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:01:59 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:02 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:03 homematic-raspi daemon.info chronyd[661]: Selected source 94.16.115.123
May  5 00:02:04 homematic-raspi daemon.info chronyd[661]: Can't synchronise: no majority
May  5 00:02:05 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:08 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:11 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:14 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:17 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:17 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:02:20 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:23 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:26 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:29 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:32 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:35 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:35 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:02:35 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  5 00:02:35 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:02:35 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:02:35 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:02:35 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:02:35 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:02:35 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:02:38 homematic-raspi daemon.err udhcpc[10475]: sending discover
May  5 00:02:40 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:02:40 homematic-raspi daemon.notice wpa_supplicant[10662]: Successfully initialized wpa_supplicant
May  5 00:02:41 homematic-raspi daemon.notice wpa_supplicant[10662]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:02:41 homematic-raspi daemon.notice wpa_supplicant[10662]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:02:41 homematic-raspi daemon.err wpa_supplicant[10662]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:02:41 homematic-raspi daemon.notice wpa_supplicant[10662]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:02:41 homematic-raspi syslog.info syslogd exiting
May  5 00:02:41 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:02:41 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:02:41 homematic-raspi daemon.err udhcpc[10475]: received SIGTERM
May  5 00:02:41 homematic-raspi daemon.err udhcpc[10680]: started, v1.29.3
May  5 00:02:41 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:02:41 homematic-raspi user.info firewall: configuration set
May  5 00:02:44 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:02:47 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:02:50 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:02:53 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  5 00:02:53 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:02:53 homematic-raspi user.warn kernel: [ 2092.615700] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:02:53 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:02:54 homematic-raspi user.warn kernel: [ 2094.492850] RTL8723BS: start auth
May  5 00:02:54 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:02:54 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=6 duration=90 reason=CONN_FAILED
May  5 00:02:54 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:02:56 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:02:59 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:03:02 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:03:05 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:03:05 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:03:08 homematic-raspi daemon.info chronyd[661]: Selected source 131.188.3.221
May  5 00:03:08 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:03:11 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:03:14 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:03:17 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:03:20 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:03:23 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:03:23 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:03:23 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:03:23 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:03:23 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:03:23 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:03:23 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:03:23 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:03:26 homematic-raspi daemon.err udhcpc[10680]: sending discover
May  5 00:03:29 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:03:29 homematic-raspi daemon.notice wpa_supplicant[10859]: Successfully initialized wpa_supplicant
May  5 00:03:29 homematic-raspi daemon.notice wpa_supplicant[10859]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:03:29 homematic-raspi daemon.notice wpa_supplicant[10859]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:03:29 homematic-raspi daemon.err wpa_supplicant[10859]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:03:29 homematic-raspi daemon.notice wpa_supplicant[10859]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:03:29 homematic-raspi syslog.info syslogd exiting
May  5 00:03:29 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:03:29 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:03:29 homematic-raspi daemon.err udhcpc[10680]: received SIGTERM
May  5 00:03:29 homematic-raspi daemon.err udhcpc[10877]: started, v1.29.3
May  5 00:03:29 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:03:29 homematic-raspi user.info firewall: configuration set
May  5 00:03:32 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:03:35 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:03:38 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:03:41 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:03:44 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:03:47 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:03:50 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:03:53 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:03:54 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:03:56 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:03:59 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:04:02 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:04:05 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:04:08 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:04:11 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:04:11 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:04:11 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  5 00:04:11 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:04:11 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:04:11 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:04:11 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:04:12 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:04:12 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:04:14 homematic-raspi daemon.err udhcpc[10877]: sending discover
May  5 00:04:17 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:04:17 homematic-raspi daemon.notice wpa_supplicant[11065]: Successfully initialized wpa_supplicant
May  5 00:04:17 homematic-raspi daemon.notice wpa_supplicant[11065]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:04:17 homematic-raspi daemon.notice wpa_supplicant[11065]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:04:17 homematic-raspi daemon.err wpa_supplicant[11065]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:04:17 homematic-raspi daemon.notice wpa_supplicant[11065]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:04:17 homematic-raspi syslog.info syslogd exiting
May  5 00:04:17 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:04:17 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:04:17 homematic-raspi daemon.err udhcpc[10877]: received SIGTERM
May  5 00:04:17 homematic-raspi daemon.err udhcpc[11083]: started, v1.29.3
May  5 00:04:17 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:17 homematic-raspi user.info firewall: configuration set
May  5 00:04:20 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:23 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:26 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:26 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  5 00:04:26 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:04:26 homematic-raspi user.warn kernel: [ 2186.714409] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:04:27 homematic-raspi user.warn kernel: [ 2186.817857] RTL8723BS: start auth
May  5 00:04:28 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:04:28 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=7 duration=90 reason=CONN_FAILED
May  5 00:04:28 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:04:29 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:32 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:35 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:38 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:41 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:42 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:04:44 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:47 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:50 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:53 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:56 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:59 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:04:59 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:04:59 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:04:59 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:04:59 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:04:59 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:05:00 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:05:00 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:05:02 homematic-raspi daemon.err udhcpc[11083]: sending discover
May  5 00:05:05 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:05:05 homematic-raspi daemon.notice wpa_supplicant[11275]: Successfully initialized wpa_supplicant
May  5 00:05:05 homematic-raspi daemon.notice wpa_supplicant[11275]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:05:05 homematic-raspi daemon.notice wpa_supplicant[11275]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:05:05 homematic-raspi daemon.err wpa_supplicant[11275]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:05:05 homematic-raspi daemon.notice wpa_supplicant[11275]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:05:05 homematic-raspi syslog.info syslogd exiting
May  5 00:05:05 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:05:05 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:05:05 homematic-raspi daemon.err udhcpc[11083]: received SIGTERM
May  5 00:05:05 homematic-raspi daemon.err udhcpc[11293]: started, v1.29.3
May  5 00:05:05 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:05 homematic-raspi user.info firewall: configuration set
May  5 00:05:08 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:11 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:14 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:17 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:20 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:23 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:26 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:29 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:30 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:05:32 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:35 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:38 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:41 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:44 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:47 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:47 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:05:48 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  5 00:05:48 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:05:48 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:05:48 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:05:48 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:05:48 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:05:48 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:05:50 homematic-raspi daemon.err udhcpc[11293]: sending discover
May  5 00:05:53 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:05:53 homematic-raspi daemon.notice wpa_supplicant[11474]: Successfully initialized wpa_supplicant
May  5 00:05:53 homematic-raspi daemon.notice wpa_supplicant[11474]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:05:53 homematic-raspi daemon.notice wpa_supplicant[11474]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:05:53 homematic-raspi daemon.err wpa_supplicant[11474]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:05:53 homematic-raspi daemon.notice wpa_supplicant[11474]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:05:53 homematic-raspi syslog.info syslogd exiting
May  5 00:05:53 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:05:53 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:05:53 homematic-raspi daemon.err udhcpc[11293]: received SIGTERM
May  5 00:05:53 homematic-raspi daemon.err udhcpc[11497]: started, v1.29.3
May  5 00:05:53 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:05:54 homematic-raspi user.info firewall: configuration set
May  5 00:05:56 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:05:59 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:00 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  5 00:06:00 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:06:00 homematic-raspi user.warn kernel: [ 2280.670787] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:06:02 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:05 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:06 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:06:06 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=8 duration=90 reason=CONN_FAILED
May  5 00:06:06 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:06:08 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:11 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:14 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:17 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:18 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:06:20 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:23 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:26 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:29 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:32 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:35 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:36 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:06:36 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:06:36 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:06:36 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:06:36 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:06:36 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:06:36 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:06:38 homematic-raspi daemon.err udhcpc[11497]: sending discover
May  5 00:06:41 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:06:41 homematic-raspi daemon.notice wpa_supplicant[11683]: Successfully initialized wpa_supplicant
May  5 00:06:41 homematic-raspi daemon.notice wpa_supplicant[11683]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:06:41 homematic-raspi daemon.notice wpa_supplicant[11683]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:06:41 homematic-raspi daemon.err wpa_supplicant[11683]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:06:41 homematic-raspi daemon.notice wpa_supplicant[11683]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:06:41 homematic-raspi syslog.info syslogd exiting
May  5 00:06:41 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:06:41 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:06:41 homematic-raspi daemon.err udhcpc[11497]: received SIGTERM
May  5 00:06:41 homematic-raspi daemon.err udhcpc[11701]: started, v1.29.3
May  5 00:06:41 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:06:42 homematic-raspi user.info firewall: configuration set
May  5 00:06:44 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:06:47 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:06:50 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:06:53 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:06:56 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:06:59 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:07:02 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:07:05 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:07:06 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:07:08 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:07:11 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:07:14 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:07:17 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:07:20 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:07:23 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:07:24 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:07:24 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  5 00:07:24 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:07:24 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:07:24 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:07:24 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:07:24 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:07:24 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:07:26 homematic-raspi daemon.err udhcpc[11701]: sending discover
May  5 00:07:29 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:07:29 homematic-raspi daemon.notice wpa_supplicant[11912]: Successfully initialized wpa_supplicant
May  5 00:07:29 homematic-raspi daemon.notice wpa_supplicant[11912]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:07:29 homematic-raspi daemon.notice wpa_supplicant[11912]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:07:29 homematic-raspi daemon.err wpa_supplicant[11912]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:07:29 homematic-raspi daemon.notice wpa_supplicant[11912]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:07:29 homematic-raspi syslog.info syslogd exiting
May  5 00:07:29 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:07:29 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:07:29 homematic-raspi daemon.err udhcpc[11701]: received SIGTERM
May  5 00:07:29 homematic-raspi daemon.err udhcpc[11930]: started, v1.29.3
May  5 00:07:29 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:07:30 homematic-raspi user.info firewall: configuration set
May  5 00:07:32 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:07:35 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:07:38 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:07:38 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  5 00:07:38 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:07:38 homematic-raspi user.warn kernel: [ 2378.754494] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:07:39 homematic-raspi user.warn kernel: [ 2379.060119] RTL8723BS: start auth
May  5 00:07:39 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:07:39 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=9 duration=90 reason=CONN_FAILED
May  5 00:07:39 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:07:41 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:07:44 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:07:47 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:07:50 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:07:53 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:07:54 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:07:56 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:07:59 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:08:02 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:08:05 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:08:08 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:08:11 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:08:12 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:08:12 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:08:12 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:08:12 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:08:12 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:08:12 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:08:12 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:08:14 homematic-raspi daemon.err udhcpc[11930]: sending discover
May  5 00:08:17 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:08:17 homematic-raspi daemon.notice wpa_supplicant[12126]: Successfully initialized wpa_supplicant
May  5 00:08:17 homematic-raspi daemon.notice wpa_supplicant[12126]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:08:17 homematic-raspi daemon.notice wpa_supplicant[12126]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:08:17 homematic-raspi daemon.err wpa_supplicant[12126]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:08:17 homematic-raspi daemon.notice wpa_supplicant[12126]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:08:17 homematic-raspi syslog.info syslogd exiting
May  5 00:08:17 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:08:17 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:08:17 homematic-raspi daemon.err udhcpc[11930]: received SIGTERM
May  5 00:08:17 homematic-raspi daemon.err udhcpc[12144]: started, v1.29.3
May  5 00:08:17 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:18 homematic-raspi user.info firewall: configuration set
May  5 00:08:20 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:23 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:26 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:29 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:32 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:35 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:38 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:41 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:42 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:08:44 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:47 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:50 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:53 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:56 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:08:59 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:09:00 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:09:00 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  5 00:09:00 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:09:00 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:09:00 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:09:00 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:09:00 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:09:00 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:09:02 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:09:05 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:09:05 homematic-raspi daemon.notice wpa_supplicant[12324]: Successfully initialized wpa_supplicant
May  5 00:09:05 homematic-raspi daemon.notice wpa_supplicant[12324]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:09:05 homematic-raspi daemon.notice wpa_supplicant[12324]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:09:05 homematic-raspi daemon.err wpa_supplicant[12324]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:09:05 homematic-raspi daemon.notice wpa_supplicant[12324]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:09:05 homematic-raspi syslog.info syslogd exiting
May  5 00:09:05 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:09:05 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:09:05 homematic-raspi daemon.err udhcpc[12144]: sending discover
May  5 00:09:05 homematic-raspi daemon.err udhcpc[12342]: started, v1.29.3
May  5 00:09:05 homematic-raspi daemon.err udhcpc[12144]: received SIGTERM
May  5 00:09:05 homematic-raspi daemon.err udhcpc[12342]: sending discover
May  5 00:09:06 homematic-raspi user.info firewall: configuration set
May  5 00:09:08 homematic-raspi daemon.err udhcpc[12342]: sending discover
May  5 00:09:11 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  5 00:09:11 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:09:11 homematic-raspi user.warn kernel: [ 2471.028286] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:09:11 homematic-raspi user.warn kernel: [ 2471.180808] RTL8723BS: start auth
May  5 00:09:11 homematic-raspi daemon.err udhcpc[12342]: sending discover
May  5 00:09:12 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:09:12 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=10 duration=90 reason=CONN_FAILED
May  5 00:09:12 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:09:14 homematic-raspi daemon.err udhcpc[12342]: sending discover
May  5 00:09:15 homematic-raspi daemon.err udhcpc[12342]: received SIGTERM
May  5 00:09:16 homematic-raspi user.info firewall: configuration set
May  5 00:09:34 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:09:34 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:09:34 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:09:34 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:09:34 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:09:34 homematic-raspi daemon.notice wpa_supplicant[9931]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:09:34 homematic-raspi daemon.notice wpa_supplicant[9931]: wlan0: CTRL-EVENT-TERMINATING
May  5 00:09:34 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:09:39 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:09:39 homematic-raspi daemon.notice wpa_supplicant[12668]: Successfully initialized wpa_supplicant
May  5 00:09:39 homematic-raspi syslog.info syslogd exiting
May  5 00:09:39 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:09:39 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:09:39 homematic-raspi daemon.err udhcpc[12687]: started, v1.29.3
May  5 00:09:39 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:09:41 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:09:41 homematic-raspi user.warn kernel: [ 2501.631355] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:09:42 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:09:45 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:09:47 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:09:47 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:09:48 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:09:48 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:09:48 homematic-raspi user.warn kernel: [ 2508.486909] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:09:49 homematic-raspi user.warn kernel: [ 2509.374225] RTL8723BS: start auth
May  5 00:09:51 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:09:51 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:09:51 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:09:52 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:09:52 homematic-raspi user.warn kernel: [ 2512.489880] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:09:52 homematic-raspi user.warn kernel: [ 2512.585268] RTL8723BS: start auth
May  5 00:09:52 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:09:52 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:09:54 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:09:54 homematic-raspi user.warn kernel: [ 2514.275161] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:09:54 homematic-raspi user.warn kernel: [ 2514.395268] RTL8723BS: start auth
May  5 00:09:54 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:09:56 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:09:56 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:09:57 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:09:58 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:09:58 homematic-raspi user.warn kernel: [ 2518.415426] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:09:58 homematic-raspi user.warn kernel: [ 2518.421931] RTL8723BS: start auth
May  5 00:09:58 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:09:58 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=1 duration=10 reason=CONN_FAILED
May  5 00:09:58 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:10:00 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:10:01 homematic-raspi user.debug script: [Setzen der Astrotimer inklusive Offset]
May  5 00:10:03 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:10:04 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:10:05 homematic-raspi user.debug script: [Batteriespannungen auslesen]
May  5 00:10:06 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:10:09 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  5 00:10:09 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:10:09 homematic-raspi user.warn kernel: [ 2529.568184] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:10:09 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:10:10 homematic-raspi user.warn kernel: [ 2530.059415] RTL8723BS: start auth
May  5 00:10:11 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:10:11 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=2 duration=20 reason=CONN_FAILED
May  5 00:10:11 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:10:12 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:10:15 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:10:18 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:10:21 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:10:22 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:10:22 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  5 00:10:22 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:10:22 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:10:22 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:10:22 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:10:22 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:10:22 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:10:24 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:10:25 homematic-raspi user.debug script: [Mondphase berechnen]
May  5 00:10:27 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:10:27 homematic-raspi daemon.notice wpa_supplicant[12782]: Successfully initialized wpa_supplicant
May  5 00:10:27 homematic-raspi daemon.notice wpa_supplicant[12782]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:10:27 homematic-raspi daemon.notice wpa_supplicant[12782]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:10:27 homematic-raspi daemon.err wpa_supplicant[12782]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:10:27 homematic-raspi daemon.notice wpa_supplicant[12782]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:10:27 homematic-raspi syslog.info syslogd exiting
May  5 00:10:27 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:10:27 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:10:27 homematic-raspi daemon.err udhcpc[12687]: sending discover
May  5 00:10:27 homematic-raspi daemon.err udhcpc[12800]: started, v1.29.3
May  5 00:10:27 homematic-raspi daemon.err udhcpc[12800]: sending discover
May  5 00:10:27 homematic-raspi daemon.err udhcpc[12687]: received SIGTERM
May  5 00:10:28 homematic-raspi user.info firewall: configuration set
May  5 00:10:30 homematic-raspi daemon.err udhcpc[12800]: sending discover
May  5 00:10:33 homematic-raspi daemon.err udhcpc[12800]: sending discover
May  5 00:10:34 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  5 00:10:34 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:10:34 homematic-raspi user.warn kernel: [ 2554.065318] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:10:34 homematic-raspi user.warn kernel: [ 2554.466486] RTL8723BS: start auth
May  5 00:10:34 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:10:34 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=3 duration=30 reason=CONN_FAILED
May  5 00:10:34 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:10:36 homematic-raspi daemon.err udhcpc[12800]: sending discover
May  5 00:10:37 homematic-raspi daemon.err udhcpc[12800]: received SIGTERM
May  5 00:10:38 homematic-raspi user.info firewall: configuration set
May  5 00:10:40 homematic-raspi user.debug script: [Wochentag und Wochenende setzen]
May  5 00:10:56 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:10:56 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:10:56 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:10:56 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:10:56 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:10:56 homematic-raspi daemon.notice wpa_supplicant[12669]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:10:56 homematic-raspi daemon.notice wpa_supplicant[12669]: wlan0: CTRL-EVENT-TERMINATING
May  5 00:10:56 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:11:00 homematic-raspi user.debug script: [Senden des Systemlogs per EMail]
May  5 00:11:00 homematic-raspi user.err email: msmtp: cannot locate host smtp.1und1.de: Temporary failure in name resolution msmtp: could not send mail (account default from /etc/config/addons/email/msmtp.conf)
May  5 00:11:00 homematic-raspi daemon.info cuxd[13125]: system(/etc/config/addons/email/email 10) exit(1) 0s
May  5 00:11:01 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:11:01 homematic-raspi daemon.notice wpa_supplicant[13134]: Successfully initialized wpa_supplicant
May  5 00:11:01 homematic-raspi syslog.info syslogd exiting
May  5 00:11:01 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:11:01 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:11:01 homematic-raspi daemon.err udhcpc[13153]: started, v1.29.3
May  5 00:11:01 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:03 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:11:03 homematic-raspi user.warn kernel: [ 2583.197078] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:11:03 homematic-raspi user.warn kernel: [ 2583.445447] RTL8723BS: start auth
May  5 00:11:03 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:03 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:04 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:11:04 homematic-raspi user.warn kernel: [ 2584.235485] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:11:04 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:04 homematic-raspi user.warn kernel: [ 2584.534875] RTL8723BS: start auth
May  5 00:11:06 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:06 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:07 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:07 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:11:07 homematic-raspi user.warn kernel: [ 2587.649860] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:11:08 homematic-raspi user.warn kernel: [ 2588.054096] RTL8723BS: start auth
May  5 00:11:08 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:08 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:09 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:11:09 homematic-raspi user.warn kernel: [ 2589.760587] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:11:10 homematic-raspi user.warn kernel: [ 2589.963658] RTL8723BS: start auth
May  5 00:11:10 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:11 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:11 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:13 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:14 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:11:14 homematic-raspi user.warn kernel: [ 2593.966522] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:11:14 homematic-raspi user.warn kernel: [ 2594.607035] RTL8723BS: start auth
May  5 00:11:14 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:14 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=1 duration=10 reason=CONN_FAILED
May  5 00:11:14 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:16 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:19 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:22 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:25 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:25 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  5 00:11:25 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:11:25 homematic-raspi user.warn kernel: [ 2605.749673] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:11:26 homematic-raspi user.warn kernel: [ 2605.938004] RTL8723BS: start auth
May  5 00:11:26 homematic-raspi user.err monit[1161]: 'wlan0' failed to start (exit status -1) -- '/sbin/ifup wlan0': Program timed out -- wlan0: up, dhcp,
May  5 00:11:27 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:27 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=2 duration=20 reason=CONN_FAILED
May  5 00:11:27 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:28 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:31 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:34 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:37 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:40 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:44 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:44 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:11:44 homematic-raspi user.err monit[1161]: 'wlan0' service restarted 1 times within 1 cycles(s) - exec
May  5 00:11:44 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:11:44 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:11:44 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:11:44 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:11:44 homematic-raspi user.info monit[1161]: 'wlan0' stopped
May  5 00:11:44 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:11:47 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:49 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="Praslin 2.4"
May  5 00:11:49 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:11:49 homematic-raspi user.warn kernel: [ 2628.950827] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:11:49 homematic-raspi user.warn kernel: [ 2629.010913] RTL8723BS: start auth
May  5 00:11:49 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:49 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Praslin 2.4" auth_failures=3 duration=30 reason=CONN_FAILED
May  5 00:11:49 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:11:49 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:11:49 homematic-raspi daemon.notice wpa_supplicant[13215]: Successfully initialized wpa_supplicant
May  5 00:11:49 homematic-raspi daemon.notice wpa_supplicant[13215]: ctrl_iface exists and seems to be in use - cannot override it
May  5 00:11:49 homematic-raspi daemon.notice wpa_supplicant[13215]: Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
May  5 00:11:49 homematic-raspi daemon.err wpa_supplicant[13215]: Failed to initialize control interface '/var/run/wpa_supplicant'. You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again.
May  5 00:11:49 homematic-raspi daemon.notice wpa_supplicant[13215]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:11:49 homematic-raspi syslog.info syslogd exiting
May  5 00:11:49 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:11:49 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:11:49 homematic-raspi daemon.err udhcpc[13153]: sending discover
May  5 00:11:49 homematic-raspi daemon.err udhcpc[13233]: started, v1.29.3
May  5 00:11:49 homematic-raspi daemon.err udhcpc[13233]: sending discover
May  5 00:11:49 homematic-raspi daemon.err udhcpc[13153]: received SIGTERM
May  5 00:11:50 homematic-raspi user.info firewall: configuration set
May  5 00:11:52 homematic-raspi daemon.err udhcpc[13233]: sending discover
May  5 00:11:55 homematic-raspi daemon.err udhcpc[13233]: sending discover
May  5 00:11:58 homematic-raspi daemon.err udhcpc[13233]: sending discover
May  5 00:11:59 homematic-raspi daemon.err udhcpc[13233]: received SIGTERM
May  5 00:12:00 homematic-raspi user.info firewall: configuration set
May  5 00:12:18 homematic-raspi user.err monit[1161]: 'hasInternet' status failed (1) -- no output
May  5 00:12:18 homematic-raspi user.info monit[1161]: 'wlan0' link data collection succeeded
May  5 00:12:18 homematic-raspi user.err monit[1161]: 'wlan0' link down
May  5 00:12:18 homematic-raspi user.info monit[1161]: 'wlan0' trying to restart
May  5 00:12:18 homematic-raspi user.info monit[1161]: 'wlan0' stop: '/sbin/ifdown wlan0'
May  5 00:12:18 homematic-raspi daemon.notice wpa_supplicant[13135]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
May  5 00:12:18 homematic-raspi daemon.notice wpa_supplicant[13135]: wlan0: CTRL-EVENT-TERMINATING
May  5 00:12:18 homematic-raspi user.info monit[1161]: 'wlan0' start: '/sbin/ifup wlan0'
May  5 00:12:23 homematic-raspi user.notice rfkill: unblock set for type wlan
May  5 00:12:23 homematic-raspi daemon.notice wpa_supplicant[13556]: Successfully initialized wpa_supplicant
May  5 00:12:23 homematic-raspi syslog.info syslogd exiting
May  5 00:12:23 homematic-raspi syslog.info syslogd started: BusyBox v1.29.3
May  5 00:12:23 homematic-raspi user.notice kernel: klogd started: BusyBox v1.29.3 (2019-05-04 19:46:25 CEST)
May  5 00:12:23 homematic-raspi daemon.err udhcpc[13575]: started, v1.29.3
May  5 00:12:23 homematic-raspi daemon.err udhcpc[13575]: sending discover
May  5 00:12:25 homematic-raspi daemon.notice wpa_supplicant[13557]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:12:25 homematic-raspi user.warn kernel: [ 2665.287158] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:12:25 homematic-raspi user.warn kernel: [ 2665.366797] RTL8723BS: start auth
May  5 00:12:25 homematic-raspi daemon.notice wpa_supplicant[13557]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:12:25 homematic-raspi daemon.notice wpa_supplicant[13557]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:12:26 homematic-raspi daemon.notice wpa_supplicant[13557]: wlan0: Trying to associate with 44:4e:6d:49:e0:be (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:12:26 homematic-raspi user.warn kernel: [ 2666.170829] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:12:26 homematic-raspi daemon.err udhcpc[13575]: sending discover
May  5 00:12:26 homematic-raspi user.warn kernel: [ 2666.559646] RTL8723BS: start auth
May  5 00:12:28 homematic-raspi daemon.notice wpa_supplicant[13557]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:12:28 homematic-raspi daemon.notice wpa_supplicant[13557]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1
May  5 00:12:29 homematic-raspi daemon.err udhcpc[13575]: sending discover
May  5 00:12:29 homematic-raspi daemon.notice wpa_supplicant[13557]: wlan0: Trying to associate with 34:31:c4:71:8f:68 (SSID='Praslin 2.4' freq=2437 MHz)
May  5 00:12:29 homematic-raspi user.warn kernel: [ 2669.690085] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
May  5 00:12:29 homematic-raspi user.warn kernel: [ 2669.766065] RTL8723BS: start auth
May  5 00:12:29 homematic-raspi daemon.notice wpa_supplicant[13557]: wlan0: CTRL-EVENT-ASSOC-REJECT status_code=1

Code: Alles auswählen

 <6>[    0.000000] Booting Linux on physical CPU 0x500
<5>[    0.000000] Linux version 4.19.36 (damato@bilbo) (gcc version 7.4.0 (Buildroot 2019.02.2-01885-gbf9ee7c9)) #1 SMP PREEMPT Sat May 4 20:10:59 CEST 2019
<6>[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
<6>[    0.000000] CPU: div instructions available: patching division code
<6>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<6>[    0.000000] OF: fdt: Machine model: Rockchip RK3288 Tinker Board
<6>[    0.000000] Memory policy: Data cache writealloc
<6>[    0.000000] cma: Reserved 8 MiB at 0x7f800000
<7>[    0.000000] On node 0 totalpages: 524288
<7>[    0.000000]
<7>[    0.000000]
<7>[    0.000000]
<7>[    0.000000]
<5>[    0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4c4 with crng_init=0
<6>[    0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s41292 r8192 d24244 u73728
Normal zone: 1728 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 196608 pages, LIFO batch:63
HighMem zone: 327680 pages, LIFO batch:63
<7>[    0.000000] pcpu-alloc: s41292 r8192 d24244 u73728 alloc=18*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<6>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522560
<5>[    0.000000] Kernel command line: console=tty2 kgdboc=tty2 scandelay=5 root=PARTUUID=deedbeef-02 ro noswap rootfstype=ext4 elevator=deadline fsck.repair=yes lapic rootwait rootdelay=5 consoleblank=120 quiet loglevel=0 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] allocated 2097152 bytes of page_ext
<6>[    0.000000] Memory: 2051028K/2097152K available (9216K kernel code, 656K rwdata, 2612K rodata, 1024K init, 703K bss, 37932K reserved, 8192K cma-reserved, 1302528K highmem)
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
<5>[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]
<5>[    0.000000]
<5>[    0.000000]
<5>[    0.000000]
<6>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[    0.000000] ftrace: allocating 30135 entries in 89 pages
<6>[    0.000000] rcu: Preemptible hierarchical RCU implementation.
<6>[    0.000000]       Tasks RCU enabled.
<6>[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
<3>[    0.000000] rockchip_mmc_get_phase: invalid clk rate
<3>[    0.000000] rockchip_mmc_get_phase: invalid clk rate
<3>[    0.000000] rockchip_mmc_get_phase: invalid clk rate
<3>[    0.000000] rockchip_mmc_get_phase: invalid clk rate
<3>[    0.000000] rockchip_mmc_get_phase: invalid clk rate
<3>[    0.000000] rockchip_mmc_get_phase: invalid clk rate
<3>[    0.000000] rockchip_mmc_get_phase: invalid clk rate
<3>[    0.000000] rockchip_mmc_get_phase: invalid clk rate
<6>[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
<6>[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
<6>[    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
<6>[    0.000022] Switching to timer-based delay loop, resolution 41ns
<6>[    0.001791] Console: colour dummy device 80x30
<6>[    0.001814] console [tty2] enabled
<6>[    0.001855] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
<6>[    0.001877] pid_max: default: 32768 minimum: 301
<6>[    0.002040] Security Framework initialized
<6>[    0.002052] Yama: becoming mindful.
<6>[    0.002287] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.002307] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.003234] CPU: Testing write buffer coherency: ok
<6>[    0.003278] CPU0: Spectre v2: using BPIALL workaround
<6>[    0.003671] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
<6>[    0.028062] Setting up static identity map for 0x100000 - 0x10003c
<6>[    0.036073] rcu: Hierarchical SRCU implementation.
<6>[    0.052189] smp: Bringing up secondary CPUs ...
<6>[    0.085712] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
<6>[    0.085723] CPU1: Spectre v2: using BPIALL workaround
<6>[    0.117921] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
<6>[    0.117931] CPU2: Spectre v2: using BPIALL workaround
<6>[    0.150143] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
<6>[    0.150153] CPU3: Spectre v2: using BPIALL workaround
<6>[    0.150357] smp: Brought up 1 node, 4 CPUs
<6>[    0.150370] SMP: Total of 4 processors activated (192.00 BogoMIPS).
<6>[    0.150379] CPU: All CPU(s) started in SVC mode.
<6>[    0.151410] devtmpfs: initialized
<6>[    0.166856] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
<6>[    0.167306] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
<6>[    0.167330] futex hash table entries: 1024 (order: 4, 65536 bytes)
<6>[    0.167935] pinctrl core: initialized pinctrl subsystem
<6>[    0.169166] NET: Registered protocol family 16
<6>[    0.174550] DMA: preallocated 2048 KiB pool for atomic coherent allocations
<6>[    0.176386] cpuidle: using governor ladder
<6>[    0.176437] cpuidle: using governor menu
<6>[    0.177006] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.177056] hw-breakpoint: maximum watchpoint size is 4 bytes.
<5>[    0.238096] SCSI subsystem initialized
<6>[    0.238385] usbcore: registered new interface driver usbfs
<6>[    0.238473] usbcore: registered new interface driver hub
<6>[    0.238616] usbcore: registered new device driver usb
<6>[    0.238711] pps_core: LinuxPPS API ver. 1 registered
<6>[    0.238721] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    0.238746] PTP clock support registered
<6>[    0.239815] NetLabel: Initializing
<6>[    0.239826] NetLabel:  domain hash size = 128
<6>[    0.239834] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
<6>[    0.239934] NetLabel:  unlabeled traffic allowed by default
<6>[    0.240564] clocksource: Switched to clocksource arch_sys_counter
<5>[    0.345402] VFS: Disk quotas dquot_6.6.0
<6>[    0.345492] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>[    0.345711] FS-Cache: Loaded
<6>[    0.345921] CacheFiles: Loaded
<6>[    0.358765] NET: Registered protocol family 2
<6>[    0.359795] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
<6>[    0.359841] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
<6>[    0.359934] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.360124] TCP: Hash tables configured (established 8192 bind 8192)
<6>[    0.360259] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.360312] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.360692] NET: Registered protocol family 1
<6>[    0.361483] RPC: Registered named UNIX socket transport module.
<6>[    0.361494] RPC: Registered udp transport module.
<6>[    0.361503] RPC: Registered tcp transport module.
<6>[    0.361512] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[    0.363453] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
<5>[    0.369763] Initialise system trusted keyrings
<6>[    0.370028] workingset: timestamp_bits=14 max_order=19 bucket_order=5
<6>[    0.378462] zbud: loaded
<5>[    0.380358] FS-Cache: Netfs 'nfs' registered for caching
<5>[    0.381096] NFS: Registering the id_resolver key type
<5>[    0.381135] Key type id_resolver registered
<5>[    0.381144] Key type id_legacy registered
<6>[    0.381166] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[    0.382135] pstore: using deflate compression
<6>[    0.382649] aufs 4.19-20181029
<5>[    0.386291] Key type asymmetric registered
<5>[    0.386303] Asymmetric key parser 'x509' registered
<6>[    0.386399] bounce: pool size: 64 pages
<6>[    0.386461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
<6>[    0.386683] io scheduler noop registered
<6>[    0.386695] io scheduler deadline registered (default)
<6>[    0.386906] io scheduler cfq registered
<6>[    0.386919] io scheduler mq-deadline registered (default)
<6>[    0.386929] io scheduler kyber registered
<6>[    0.395285] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
<6>[    0.395303] dma-pl330 ff250000.dma-controller:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
<6>[    0.396239] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
<6>[    0.396258] dma-pl330 ffb20000.dma-controller:    DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
<4>[    0.397668] dw-apb-uart: probe of ff180000.serial failed with error -28
<6>[    0.399854] iommu: Adding device ff930000.vop to group 0
<6>[    0.400162] rockchip-vop ff930000.vop: Linked as a consumer to ff930300.iommu
<6>[    0.400643] iommu: Adding device ff940000.vop to group 1
<6>[    0.400697] rockchip-vop ff940000.vop: Linked as a consumer to ff940300.iommu
<6>[    0.402483] rockchip-drm display-subsystem: Linked as a consumer to ff930000.vop
<6>[    0.402525] rockchip-drm display-subsystem: Linked as a consumer to ff940000.vop
<6>[    0.403128] rockchip-drm display-subsystem: Linked as a consumer to ff980000.hdmi
<6>[    0.404008] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops)
<6>[    0.404509] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops)
<3>[    0.404668] rockchip-drm display-subsystem: failed to bind ff980000.hdmi (ops dw_hdmi_rockchip_ops): -517
<6>[    0.404937] rockchip-drm display-subsystem: master bind failed: -517
<6>[    0.405321] usbcore: registered new interface driver udl
<6>[    0.421841] brd: module loaded
<6>[    0.433953] loop: module loaded
<6>[    0.434013] Loading iSCSI transport class v2.0-870.
<6>[    0.435424] libphy: Fixed MDIO Bus: probed
<4>[    0.436882] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock
<3>[    0.436930] rk_gmac-dwmac ff290000.ethernet: phy regulator is not available yet, deferred probing
<6>[    0.438053] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
<6>[    0.438121] usbcore: registered new interface driver pegasus
<6>[    0.438172] usbcore: registered new interface driver rtl8150
<6>[    0.438237] usbcore: registered new interface driver r8152
<6>[    0.438286] usbcore: registered new interface driver lan78xx
<6>[    0.438335] usbcore: registered new interface driver dm9601
<6>[    0.438407] usbcore: registered new interface driver smsc75xx
<6>[    0.438474] usbcore: registered new interface driver smsc95xx
<4>[    0.438838] dwc2 ff540000.usb: ff540000.usb supply vusb_d not found, using dummy regulator
<6>[    0.438937] dwc2 ff540000.usb: Linked as a consumer to regulator.0
<4>[    0.438961] dwc2 ff540000.usb: ff540000.usb supply vusb_a not found, using dummy regulator
<6>[    0.497161] dwc2 ff540000.usb: DWC OTG Controller
<6>[    0.497201] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
<6>[    0.497245] dwc2 ff540000.usb: irq 43, io mem 0xff540000
<6>[    0.497696] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
<6>[    0.497712] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.497725] usb usb1: Product: DWC OTG Controller
<6>[    0.497737] usb usb1: Manufacturer: Linux 4.19.36 dwc2_hsotg
<6>[    0.497748] usb usb1: SerialNumber: ff540000.usb
<6>[    0.498439] hub 1-0:1.0: USB hub found
<6>[    0.498509] hub 1-0:1.0: 1 port detected
<4>[    0.499395] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
<6>[    0.499509] dwc2 ff580000.usb: Linked as a consumer to regulator.0
<4>[    0.499533] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
<4>[    0.499807] dwc2 ff580000.usb: dwc2_core_reset: HANG! Soft Reset timeout GRSTCTL GRSTCTL_CSFTRST
<4>[    0.500030] dwc2: probe of ff580000.usb failed with error -16
<6>[    0.501141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    0.501151] ehci-platform: EHCI generic platform driver
<6>[    0.501464] ehci-platform ff500000.usb: EHCI Host Controller
<6>[    0.501725] ehci-platform ff500000.usb: new USB bus registered, assigned bus number 2
<6>[    0.502021] ehci-platform ff500000.usb: irq 42, io mem 0xff500000
<6>[    0.516600] ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00
<6>[    0.516942] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
<6>[    0.516958] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    0.516970] usb usb2: Product: EHCI Host Controller
<6>[    0.516982] usb usb2: Manufacturer: Linux 4.19.36 ehci_hcd
<6>[    0.516994] usb usb2: SerialNumber: ff500000.usb
<6>[    0.517659] hub 2-0:1.0: USB hub found
<6>[    0.517730] hub 2-0:1.0: 1 port detected
<6>[    0.518672] usbcore: registered new interface driver cdc_acm
<6>[    0.518681] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    0.518803] usbcore: registered new interface driver usb-storage
<6>[    0.518924] usbcore: registered new interface driver usbserial_generic
<6>[    0.518969] usbserial: USB Serial support registered for generic
<6>[    0.519029] usbcore: registered new interface driver keyspan
<6>[    0.519071] usbserial: USB Serial support registered for Keyspan - (without firmware)
<6>[    0.519112] usbserial: USB Serial support registered for Keyspan 1 port adapter
<6>[    0.519162] usbserial: USB Serial support registered for Keyspan 2 port adapter
<6>[    0.519204] usbserial: USB Serial support registered for Keyspan 4 port adapter
<6>[    0.519267] usbcore: registered new interface driver option
<6>[    0.519309] usbserial: USB Serial support registered for GSM modem (1-port)
<6>[    0.519504] usbcore: registered new interface driver oti6858
<6>[    0.519547] usbserial: USB Serial support registered for oti6858
<6>[    0.519606] usbcore: registered new interface driver qcserial
<6>[    0.519647] usbserial: USB Serial support registered for Qualcomm USB modem
<6>[    0.519719] usbcore: registered new interface driver sierra
<6>[    0.519769] usbserial: USB Serial support registered for Sierra USB modem
<6>[    0.520111] mousedev: PS/2 mouse device common for all mice
<6>[    0.523183] rk808 0-001b: chip id: 0x0
<6>[    0.527554] DCDC_REG1: supplied by vcc_sys
<6>[    0.528686] DCDC_REG2: supplied by vcc_sys
<6>[    0.529563] DCDC_REG3: supplied by vcc_sys
<6>[    0.529967] DCDC_REG4: supplied by vcc_sys
<6>[    0.530703] LDO_REG1: supplied by vcc_sys
<6>[    0.532317] LDO_REG2: supplied by vcc_sys
<6>[    0.533486] LDO_REG3: supplied by vcc_sys
<6>[    0.534810] LDO_REG4: supplied by vcc_io
<6>[    0.536136] LDO_REG5: supplied by vcc_io
<6>[    0.537506] LDO_REG6: supplied by vcc_io
<6>[    0.538858] LDO_REG7: supplied by vcc_sys
<6>[    0.540172] LDO_REG8: supplied by vcc_sys
<6>[    0.541524] SWITCH_REG1: supplied by vcc_io
<6>[    0.541935] SWITCH_REG2: supplied by vcc_io
<6>[    0.544738] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.13
<6>[    0.544906] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.11
<6>[    0.548280] cpu cpu0: Linked as a consumer to regulator.3
<6>[    0.548372] cpu cpu0: Dropping the link to regulator.3
<6>[    0.548735] cpu cpu0: Linked as a consumer to regulator.3
<4>[    0.551186] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 500000 KHz
<4>[    0.551627] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz
<6>[    0.553150] sdhci: Secure Digital Host Controller Interface driver
<6>[    0.553153] sdhci: Copyright(c) Pierre Ossman
<6>[    0.553156] Synopsys Designware Multimedia Card Interface Driver
<6>[    0.553532] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
<6>[    0.553585] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
<6>[    0.553592] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
<6>[    0.553618] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
<6>[    0.553669] dwmmc_rockchip ff0c0000.dwmmc: Linked as a consumer to regulator.15
<6>[    0.553700] dwmmc_rockchip ff0c0000.dwmmc: Linked as a consumer to regulator.11
<6>[    0.566594] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
<6>[    0.581422] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
<6>[    0.581613] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
<6>[    0.581655] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
<6>[    0.581847] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
<6>[    0.582269] dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq
<6>[    0.582301] mmc_host mmc1: card is non-removable.
<6>[    0.596199] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
<6>[    0.610731] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode.
<6>[    0.610943] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller.
<6>[    0.610983] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a
<6>[    0.611146] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
<6>[    0.611568] mmc_host mmc2: card is non-removable.
<6>[    0.624648] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
<6>[    0.628483] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
<6>[    0.629379] mmc1: new high speed SDIO card at address 0001
<6>[    0.637654] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    0.639468] ledtrig-cpu: registered to indicate activity on CPUs
<6>[    0.641306] rk3288-crypto ff8a0000.cypto-controller: Crypto Accelerator successfully registered
<6>[    0.641528] hidraw: raw HID events driver (C) Jiri Kosina
<6>[    0.641665] usbcore: registered new interface driver usbhid
<6>[    0.641672] usbhid: USB HID core driver
<6>[    0.642014] ashmem: initialized
<6>[    0.643107] NET: Registered protocol family 17
<5>[    0.643207] Key type dns_resolver registered
<6>[    0.643534] ThumbEE CPU extension supported.
<5>[    0.643548] Registering SWP/SWPB emulation handler
<6>[    0.644179] registered taskstats version 1
<5>[    0.644192] Loading compiled-in X.509 certificates
<5>[    0.644492] random: fast init done
<6>[    0.658361] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops)
<6>[    0.658623] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops)
<6>[    0.658725] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY)
<6>[    0.659027] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops)
<6>[    0.659032] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[    0.659035] [drm] No driver support for vblank timestamp query.
<6>[    0.659058] [drm] Cannot find any crtc or sizes
<6>[    0.659303] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
<4>[    0.659718] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock
<6>[    0.659772] rk_gmac-dwmac ff290000.ethernet: Linked as a consumer to regulator.16
<6>[    0.659777] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input).
<6>[    0.659782] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30).
<6>[    0.659786] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10).
<6>[    0.659791] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no).
<3>[    0.659823] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed
<6>[    0.659826] rk_gmac-dwmac ff290000.ethernet: clock input from PHY
<6>[    0.664838] rk_gmac-dwmac ff290000.ethernet: init for RGMII
<6>[    0.664934] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35
<6>[    0.664940] rk_gmac-dwmac ff290000.ethernet:      DWMAC1000
<6>[    0.664944] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported
<6>[    0.664948] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported
<6>[    0.664951] rk_gmac-dwmac ff290000.ethernet: COE Type 2
<6>[    0.664954] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported
<6>[    0.664957] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported
<6>[    0.664960] rk_gmac-dwmac ff290000.ethernet: Normal descriptors
<6>[    0.664964] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled
<6>[    0.664967] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer
<6>[    0.707462] mmc_host mmc2: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
<6>[    0.856690] usb 2-1: new high-speed USB device number 2 using ehci-platform
<6>[    0.892722] usb 1-1: new high-speed USB device number 2 using dwc2
<6>[    0.981983] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to 202
<6>[    0.983828] mmc2: new HS200 MMC card at address 0001
<6>[    0.989429] mmcblk2: mmc2:0001 HAG4a2 14.7 GiB
<6>[    0.993343] mmcblk2boot0: mmc2:0001 HAG4a2 partition 1 4.00 MiB
<6>[    0.997278] mmcblk2boot1: mmc2:0001 HAG4a2 partition 2 4.00 MiB
<6>[    0.998034] mmcblk2rpmb: mmc2:0001 HAG4a2 partition 3 4.00 MiB, chardev (247:0)
<6>[    1.002173]  mmcblk2: p1 p2 p3
<6>[    1.103276] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
<6>[    1.103314] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
<6>[    1.103342] usb 1-1: Product: USB2.0 Hub
<6>[    1.104971] hub 1-1:1.0: USB hub found
<6>[    1.105479] hub 1-1:1.0: 4 ports detected
<4>[    1.210866] usb 2-1: config 1 has an invalid interface number: 255 but max is 6
<4>[    1.210901] usb 2-1: config 1 has no interface number 6
<6>[    1.213012] usb 2-1: New USB device found, idVendor=0bda, idProduct=481a, bcdDevice= 0.00
<6>[    1.213073] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
<6>[    1.213122] usb 2-1: Product: USB Audio
<6>[    1.213167] usb 2-1: Manufacturer: Generic
<6>[    1.213212] usb 2-1: SerialNumber: 201405280001
<6>[    1.227237] input: Generic USB Audio Consumer Control as /devices/platform/ff500000.usb/usb2/2-1/2-1:1.255/0003:0BDA:481A.0001/input/input0
<6>[    1.284630] input: Generic USB Audio as /devices/platform/ff500000.usb/usb2/2-1/2-1:1.255/0003:0BDA:481A.0001/input/input1
<6>[    1.284787] hid-generic 0003:0BDA:481A.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [Generic USB Audio] on usb-ff500000.usb-1/input255
<6>[    1.404619] usb 1-1.3: new high-speed USB device number 3 using dwc2
<6>[    1.507272] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00
<6>[    1.507297] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[    1.507315] usb 1-1.3: Product: Ultra Fit
<6>[    1.507351] usb 1-1.3: Manufacturer: SanDisk
<6>[    1.507370] usb 1-1.3: SerialNumber: 4C530001251027121091
<6>[    1.508787] usb-storage 1-1.3:1.0: USB Mass Storage device detected
<6>[    1.509789] scsi host0: usb-storage 1-1.3:1.0
<6>[    1.668757] [drm] Cannot find any crtc or sizes
<6>[    1.710977] libphy: stmmac: probed
<6>[    1.711008] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
<6>[    1.711030] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
<6>[    1.714608] vcc_sd: supplied by vcc_io
<6>[    1.714803] vcc_sd: disabling
<6>[    1.715997] Waiting 5 sec before mounting root device...
<5>[    2.534742] scsi 0:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
<5>[    2.536539] sd 0:0:0:0: [sda] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
<5>[    2.538797] sd 0:0:0:0: [sda] Write Protect is off
<7>[    2.538824] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
<5>[    2.540035] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6>[    2.547260]  sda: sda1
<5>[    2.549875] sd 0:0:0:0: [sda] Attached SCSI removable disk
<5>[    2.810902] random: crng init done
<6>[    6.897894] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null)
<6>[    6.897916] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
<6>[    6.899561] devtmpfs: mounted
<6>[    6.901528] Freeing unused kernel memory: 1024K
<6>[    6.901623] Run /sbin/init as init process
<4>[    7.221697] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
<6>[    7.225032] EXT4-fs (mmcblk2p3): mounted filesystem with journalled data mode. Opts: data=journal
<6>[    7.290083] i2c /dev entries driver
<4>[    7.308644] rtc_rx8130: loading out-of-tree module taints kernel.
<6>[    7.313265] rtc-ds1307 1-0032: registered as rtc0
<6>[    7.313417] i2c i2c-1: new_device: Instantiated device rx8130 at 0x32
<6>[   15.835457] tun: Universal TUN/TAP device driver, 1.6
<30>[   15.885675] udevd[246]: starting version 3.2.7
<27>[   15.888436] udevd[246]: specified group 'kvm' unknown
<30>[   15.898503] udevd[247]: starting eudev-3.2.7
<27>[   15.910029] udevd[247]: specified group 'kvm' unknown
<6>[   15.959828] rockchip-saradc ff100000.saradc: Linked as a consumer to regulator.7
<6>[   15.963118] dw_apb_raw_uart ff190000.serial: No valid reset pin configured in device tree
<6>[   15.986158] rk808-rtc rk808-rtc: registered as rtc1
<6>[   15.989778] usbcore: registered new interface driver uas
<5>[   16.006339] cfg80211: Loading compiled-in X.509 certificates for regulatory database
<3>[   16.013876] rockchip-pinctrl pinctrl: pin gpio6-0 already requested by gpio-leds; cannot claim for ff890000.i2s
<3>[   16.013886] rockchip-pinctrl pinctrl: pin-184 (ff890000.i2s) status -22
<3>[   16.013891] rockchip-pinctrl pinctrl: could not request pin 184 (gpio6-0) from group i2s0-bus  on device rockchip-pinctrl
<3>[   16.013895] rockchip-i2s ff890000.i2s: Error applying setting, reverse things back
<4>[   16.013913] rockchip-i2s: probe of ff890000.i2s failed with error -22
<6>[   16.019122] mali ffa30000.gpu: Linked as a consumer to regulator.4
<6>[   16.019318] input: gpio-keys as /devices/platform/gpio-keys/input/input2
<6>[   16.019828] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
<6>[   16.019979] mali ffa30000.gpu: Protected mode not available
<5>[   16.021164] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
<6>[   16.021211] mali ffa30000.gpu: Probed as mali0
<4>[   16.021603] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
<6>[   16.021611] cfg80211: failed to load regulatory.db
<4>[   16.029563] r8723bs: module is from the staging directory, the quality is unknown, you have been warned.
<4>[   16.039843] RTL8723BS: module init start
<4>[   16.039851] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
<4>[   16.039853] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
<6>[   16.044647] pnetdev = 9f69ee85
<4>[   16.094341] RTL8723BS: rtw_ndev_init(wlan0)
<4>[   16.095218] RTL8723BS: module init ret =0
<6>[   16.228626] dw_apb_raw_uart ff190000.serial: Initialized dw_apb device; mapbase=0xff190000; irq=38; sclk rate=1843200; pclk rate=74250000
<4>[   16.263879] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>[   18.133898] usbcore: registered new interface driver snd-usb-audio
<6>[   22.251232] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
<6>[   22.260567] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found
<4>[   22.260581] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW
<6>[   23.269881] rk_gmac-dwmac ff290000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>[   24.548986] NET: Registered protocol family 10
<6>[   24.551479] Segment Routing with IPv6
<6>[   36.851730] eq3loop: created slave mmd_hmip
<6>[   36.852001] eq3loop: created slave mmd_bidcos
<6>[   38.949638] eq3loop: eq3loop_open_slave() mmd_bidcos
<6>[   46.756925] eq3loop: eq3loop_open_slave() mmd_hmip
<6>[   46.757040] eq3loop: eq3loop_close_slave() mmd_hmip
<6>[   46.758849] eq3loop: eq3loop_open_slave() mmd_hmip
<6>[   46.758926] eq3loop: eq3loop_close_slave() mmd_hmip
<6>[   46.764334] eq3loop: eq3loop_open_slave() mmd_hmip
<6>[   63.222095] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null)
<6>[   63.274743] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null)
<6>[   63.285215] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null)
<6>[   63.323525] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null)
<6>[   63.329380] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null)
<6>[   63.360297] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null)
<6>[   63.367656] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null)
<6>[   63.394753] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null)
<6>[   63.400715] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null)
<6>[   63.429727] EXT4-fs (mmcblk2p2): re-mounted. Opts: (null)
<6>[   85.634073] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin
<6>[   86.955562] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[   88.473459] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[   88.511705] RTL8723BS: start auth
<4>[   90.077400] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[   90.356789] RTL8723BS: start auth
<4>[   92.329683] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[   92.507909] RTL8723BS: start auth
<4>[   94.960174] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[   95.167573] RTL8723BS: start auth
<4>[  105.526322] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  133.264148] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  133.505157] RTL8723BS: start auth
<4>[  166.191871] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  166.436795] RTL8723BS: start auth
<4>[  228.535080] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  229.144288] RTL8723BS: start auth
<4>[  292.483029] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  292.593932] RTL8723BS: start auth
<4>[  384.568925] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  384.650600] RTL8723BS: start auth
<6>[  451.001389] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[  457.971458] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  458.681411] RTL8723BS: start auth
<4>[  459.478331] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  459.647134] RTL8723BS: start auth
<4>[  462.424327] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  462.982122] RTL8723BS: start auth
<4>[  464.683639] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  464.767032] RTL8723BS: start auth
<4>[  468.431345] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  468.614655] RTL8723BS: start auth
<4>[  479.753448] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  479.922531] RTL8723BS: start auth
<4>[  503.753110] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  540.633266] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  547.535752] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  548.017770] RTL8723BS: start auth
<4>[  551.123659] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  551.147041] RTL8723BS: start auth
<4>[  552.865043] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  552.933233] RTL8723BS: start auth
<4>[  556.626812] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  556.778785] RTL8723BS: start auth
<4>[  567.917070] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  568.292403] RTL8723BS: start auth
<4>[  591.607809] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  591.800361] RTL8723BS: start auth
<4>[  622.230705] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  622.316128] RTL8723BS: start auth
<4>[  623.122961] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  623.485997] RTL8723BS: start auth
<4>[  625.976458] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  626.309642] RTL8723BS: start auth
<4>[  628.839096] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  633.118971] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  633.886494] RTL8723BS: start auth
<4>[  645.025239] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  645.092483] RTL8723BS: start auth
<4>[  668.393646] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  668.600263] RTL8723BS: start auth
<4>[  704.818343] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  704.948997] RTL8723BS: start auth
<4>[  705.765827] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  706.226860] RTL8723BS: start auth
<4>[  708.729570] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  708.945570] RTL8723BS: start auth
<4>[  710.668372] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  710.728166] RTL8723BS: start auth
<4>[  714.128251] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  714.885021] RTL8723BS: start auth
<4>[  726.025614] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  726.602191] RTL8723BS: start auth
<4>[  749.899634] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  749.904494] RTL8723BS: start auth
<4>[  786.959679] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  787.279420] RTL8723BS: start auth
<4>[  788.094434] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  788.145858] RTL8723BS: start auth
<4>[  791.289448] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  791.680901] RTL8723BS: start auth
<4>[  793.375954] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  793.672560] RTL8723BS: start auth
<4>[  797.349870] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  797.414784] RTL8723BS: start auth
<4>[  808.555054] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  808.929796] RTL8723BS: start auth
<4>[  832.644015] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  869.113889] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  869.298149] RTL8723BS: start auth
<4>[  870.106522] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  870.471576] RTL8723BS: start auth
<4>[  873.265076] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  873.291924] RTL8723BS: start auth
<4>[  875.009638] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  875.491573] RTL8723BS: start auth
<4>[  879.509338] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  879.539421] RTL8723BS: start auth
<4>[  890.675969] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  890.954131] RTL8723BS: start auth
<4>[  913.636801] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  914.047757] RTL8723BS: start auth
<4>[  951.196474] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  951.216813] RTL8723BS: start auth
<4>[  952.026374] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  952.084286] RTL8723BS: start auth
<4>[  954.909302] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  955.312825] RTL8723BS: start auth
<4>[  957.069292] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  957.613314] RTL8723BS: start auth
<4>[  961.647656] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  962.379861] RTL8723BS: start auth
<4>[  973.526736] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  973.689855] RTL8723BS: start auth
<4>[  996.400041] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[  996.783849] RTL8723BS: start auth
<4>[ 1033.214548] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1033.241266] RTL8723BS: start auth
<4>[ 1034.517711] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1042.136262] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1042.149733] RTL8723BS: start auth
<4>[ 1043.845378] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1044.039387] RTL8723BS: start auth
<4>[ 1047.441606] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1047.573362] RTL8723BS: start auth
<4>[ 1058.724052] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1058.889648] RTL8723BS: start auth
<4>[ 1081.860881] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1082.185626] RTL8723BS: start auth
<4>[ 1115.280830] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1115.361650] RTL8723BS: start auth
<4>[ 1116.174559] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1116.640646] RTL8723BS: start auth
<4>[ 1119.776409] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1120.174432] RTL8723BS: start auth
<4>[ 1121.868110] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1122.069040] RTL8723BS: start auth
<4>[ 1125.748381] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1126.112793] RTL8723BS: start auth
<4>[ 1137.242508] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1137.326610] RTL8723BS: start auth
<4>[ 1160.667447] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1160.725064] RTL8723BS: start auth
<4>[ 1192.732862] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1192.824489] RTL8723BS: start auth
<4>[ 1256.139428] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1256.160717] RTL8723BS: start auth
<4>[ 1318.155663] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1318.265350] RTL8723BS: start auth
<4>[ 1410.978337] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1410.984549] RTL8723BS: start auth
<4>[ 1502.957152] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1503.041220] RTL8723BS: start auth
<4>[ 1595.525274] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1694.164077] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1726.337934] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1733.324633] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1733.391304] RTL8723BS: start auth
<4>[ 1736.190256] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1736.303817] RTL8723BS: start auth
<4>[ 1737.983204] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1738.614934] RTL8723BS: start auth
<4>[ 1742.297143] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1742.345146] RTL8723BS: start auth
<4>[ 1753.478232] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1753.973071] RTL8723BS: start auth
<4>[ 1777.118920] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1777.160748] RTL8723BS: start auth
<4>[ 1808.020931] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1808.085398] RTL8723BS: start auth
<4>[ 1808.895588] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1808.965155] RTL8723BS: start auth
<4>[ 1812.090658] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1812.386538] RTL8723BS: start auth
<4>[ 1814.088542] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1814.186293] RTL8723BS: start auth
<4>[ 1818.217701] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1818.325138] RTL8723BS: start auth
<4>[ 1829.466420] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1829.648781] RTL8723BS: start auth
<4>[ 1852.600726] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1852.628829] RTL8723BS: start auth
<4>[ 1890.332965] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1890.617976] RTL8723BS: start auth
<4>[ 1891.420671] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1891.600023] RTL8723BS: start auth
<4>[ 1894.410180] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1894.508851] RTL8723BS: start auth
<4>[ 1897.151491] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1897.335697] RTL8723BS: start auth
<4>[ 1900.745215] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1900.859544] RTL8723BS: start auth
<4>[ 1912.013250] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1912.078739] RTL8723BS: start auth
<4>[ 1935.097147] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1935.263680] RTL8723BS: start auth
<4>[ 1967.302608] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 1967.475942] RTL8723BS: start auth
<4>[ 2030.461852] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2030.596359] RTL8723BS: start auth
<4>[ 2092.615700] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2094.492850] RTL8723BS: start auth
<4>[ 2186.714409] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2186.817857] RTL8723BS: start auth
<4>[ 2280.670787] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2378.754494] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2379.060119] RTL8723BS: start auth
<4>[ 2471.028286] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2471.180808] RTL8723BS: start auth
<4>[ 2501.631355] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2508.486909] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2509.374225] RTL8723BS: start auth
<4>[ 2512.489880] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2512.585268] RTL8723BS: start auth
<4>[ 2514.275161] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2514.395268] RTL8723BS: start auth
<4>[ 2518.415426] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2518.421931] RTL8723BS: start auth
<4>[ 2529.568184] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2530.059415] RTL8723BS: start auth
<4>[ 2554.065318] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2554.466486] RTL8723BS: start auth
<4>[ 2583.197078] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2583.445447] RTL8723BS: start auth
<4>[ 2584.235485] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2584.534875] RTL8723BS: start auth
<4>[ 2587.649860] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2588.054096] RTL8723BS: start auth
<4>[ 2589.760587] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2589.963658] RTL8723BS: start auth
<4>[ 2593.966522] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2594.607035] RTL8723BS: start auth
<4>[ 2605.749673] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2605.938004] RTL8723BS: start auth
<4>[ 2628.950827] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2629.010913] RTL8723BS: start auth
<4>[ 2665.287158] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2665.366797] RTL8723BS: start auth
<4>[ 2666.170829] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2666.559646] RTL8723BS: start auth
<4>[ 2669.690085] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2669.766065] RTL8723BS: start auth
<4>[ 2671.480155] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2671.575161] RTL8723BS: start auth
<4>[ 2674.677092] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2674.786103] RTL8723BS: start auth
<4>[ 2685.926649] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2686.833277] RTL8723BS: start auth
<4>[ 2709.807828] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2709.908592] RTL8723BS: start auth
<4>[ 2748.108048] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2755.022679] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2755.131720] RTL8723BS: start auth
<4>[ 2758.255938] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2758.545387] RTL8723BS: start auth
<4>[ 2760.244899] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2761.686937] RTL8723BS: start auth
<4>[ 2765.728315] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2765.814813] RTL8723BS: start auth
<4>[ 2776.968609] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2777.353388] RTL8723BS: start auth
<4>[ 2800.317973] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2800.322939] RTL8723BS: start auth
<4>[ 2832.315406] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2832.446656] RTL8723BS: start auth
<4>[ 2895.763368] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2895.862214] RTL8723BS: start auth
<4>[ 2957.815088] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 2957.883654] RTL8723BS: start auth
<4>[ 3050.870965] RTL8723BS: rtw_set_802_11_connect(wlan0)  fw_state = 0x00000008
<4>[ 3050.891463] RTL8723BS: start auth
.text : 0x(ptrval) - 0x(ptrval)
.init : 0x(ptrval) - 0x(ptrval)
.data : 0x(ptrval) - 0x(ptrval)
(10208 kB)
(1024 kB)
( 657 kB)
( 704 kB)
.bss : 0x(ptrval) - 0x(ptrval)

Gruß
Klana

bibo09 · Beitrag von **bibo09** » 05.05.2019, 08:09

Moin,
neue Version auf dem TinkerBoard S installiert funktioniert alles wie immer 1a.

Danke und Gruß
bibo

HomeMatic-Forum / FHZ-Forum

RaspberryMatic 3.45.7.20190504 – Erfahrungsberichte

Re: RaspberryMatic 3.45.7.20190504 – Erfahrungsberichte

Re: RaspberryMatic 3.45.7.20190504 – Erfahrungsberichte

Re: RaspberryMatic 3.45.7.20190504 – Erfahrungsberichte

Re: RaspberryMatic 3.45.7.20190504 – Erfahrungsberichte

Re: RaspberryMatic 3.45.7.20190504 – Erfahrungsberichte

Re: RaspberryMatic 3.45.7.20190504 – Erfahrungsberichte

Re: RaspberryMatic 3.45.7.20190504 – Erfahrungsberichte

Re: RaspberryMatic 3.45.7.20190504 – Erfahrungsberichte

Re: RaspberryMatic 3.45.7.20190504 – Erfahrungsberichte

Re: RaspberryMatic 3.45.7.20190504 – Erfahrungsberichte