Code: Alles auswählen
Loading avrdude config...
/usr/local/Cellar/avrdude/6.3_1/bin/avrdude -v -c ?
SUCCESS
Reading fuses...
/usr/local/Cellar/avrdude/6.3_1/bin/avrdude -P /dev/cu.usbmodem14701 -c stk500v2 -b 57600 -p ATmega328P -s -B 1 -U lfuse:r:/tmp/LOW.tmp:h -U efuse:r:/tmp/EXTENDED.tmp:h -U hfuse:r:/tmp/HIGH.tmp:h
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: reading lfuse memory:
Reading | ################################################## | 100% 0.00s
avrdude: writing output file "/tmp/LOW.tmp"
avrdude: reading efuse memory:
Reading | ################################################## | 100% 0.00s
avrdude: writing output file "/tmp/EXTENDED.tmp"
avrdude: reading hfuse memory:
Reading | ################################################## | 100% 0.00s
avrdude: writing output file "/tmp/HIGH.tmp"
avrdude: safemode: Fuses OK (E:FD, H:DA, L:FF)
avrdude done. Thank you.
SUCCESS
Was ich da wieder an Zeit verballert habe, weil ich selbst dahinter kommen wollte