"XmlRpcClient error calling event ... on binary://127.0.0.1:8701/RPC2"

Anbindung von FS20-Komponenten, ELV-Wetterstationen, EnOcean und DMX an HomeMatic

Moderator: Co-Administratoren

Antworten
apollon77
Beiträge: 308
Registriert: 12.10.2013, 12:32

"XmlRpcClient error calling event ... on binary://127.0.0.1:8701/RPC2"

Beitrag von apollon77 » 21.08.2022, 09:40

Hi @uwe111,

bei mir läuft ccu2 (früher) und jetzt ccu3 mit cuxd an sich immer Problemlos ...

Heute früh fingen sehr komische Probleme an (natürlich genau am zweiten tag wo wir nicht zuhause sind).

Der Fehler ist im Log der hier:

Code: Alles auswählen

Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support system.listMethods
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support system.methodHelp
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support init
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support listDevices
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support deleteDevice
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support getDeviceDescription
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support getParamsetDescription
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support getParamset
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support putParamset
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support getValue
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support setValue
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support reportValueUsage
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support listReplaceableDevices
Aug 21 09:23:11 ccu3-webui.fritz.box rfd: rcux support ping
Aug 21 09:23:39 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:23:49 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","NEQ0071913:0","LOWBAT",true}]}) on binary://127.0.0.1:8701/RPC2:
Aug 21 09:23:49 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:23:59 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:24:09 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","NEQ0071913:1","TEMPERATURE",25.400000}],[methodName:"event",params:{"rcux","NEQ0071913:1","HUMIDITY",50}],[methodName:"event",params:{"rcux","REQ1390511:2","BOOT",true}],[methodName:"event",params:{"rcux","REQ1390511:2","ENERGY_COUNTER",177072.400000}],[methodName:"event",params:{"rcux","REQ1390511:2","POWER",230.750000}],[methodName:"event",params:{"rcux","REQ1390511:2","CURRENT",1022.000000}],[methodName:"event",params:{"rcux","REQ1390511:2","VOLTAGE",229.800000}],[methodName:"event",params:{"rcux","REQ1390511:2","FREQUENCY",50.000000}],[methodName:"event",params:{"rcux","NEQ0775524:1","TEMPERATURE",28.300000}],[methodName:"event",params:{"rcux","NEQ0775524:2","TEMPERATURE",28.500000}],[methodName:"event",params:{"rcux","NEQ0775524:3","TEMPERATURE",-0.200000}],[methodName:"event",params:{"rcux","NEQ0775524:4","TEMPERATURE",0.200000}],[methodName:"event",params:{"rcux","NEQ0775524:0","LOWBAT",false}],[methodName:"
Aug 21 09:24:09 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:24:19 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:24:29 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","MEQ0270119:2","BOOT",true}],[methodName:"event",params:{"rcux","MEQ0270119:2","ENERGY_COUNTER",194756.200000}],[methodName:"event",params:{"rcux","MEQ0270119:2","POWER",54.340000}],[methodName:"event",params:{"rcux","MEQ0270119:2","CURRENT",361.000000}],[methodName:"event",params:{"rcux","MEQ0270119:2","VOLTAGE",229.500000}],[methodName:"event",params:{"rcux","MEQ0270119:2","FREQUENCY",49.990000}],[methodName:"event",params:{"rcux","SEQ0026985:1","TEMPERATURE",23.500000}],[methodName:"event",params:{"rcux","SEQ0026985:2","TEMPERATURE",23.900000}],[methodName:"event",params:{"rcux","SEQ0026985:3","TEMPERATURE",-0.400000}],[methodName:"event",params:{"rcux","SEQ0026985:4","TEMPERATURE",0.400000}],[methodName:"event",params:{"rcux","SEQ0026985:0","LOWBAT",false}],[methodName:"event",params:{"rcux","SEQ0026985:1","LOWBAT",false}],[methodName:"event",params:{"rcux","SEQ0026985:2","LOWBAT",false}],[methodName:"event",par
Aug 21 09:24:29 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:24:39 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:24:49 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","QEQ1860372:1","TEMPERATURE",19.100000}],[methodName:"event",params:{"rcux","QEQ1860372:1","HUMIDITY",65}],[methodName:"event",params:{"rcux","LEQ0122925:1","TEMPERATURE",25.600000}],[methodName:"event",params:{"rcux","LEQ0122925:1","HUMIDITY",49}],[methodName:"event",params:{"rcux","MEQ0789108:4","CONTROL_MODE",1}],[methodName:"event",params:{"rcux","MEQ0789108:4","FAULT_REPORTING",0}],[methodName:"event",params:{"rcux","MEQ0789108:4","BATTERY_STATE",3.000000}],[methodName:"event",params:{"rcux","MEQ0789108:4","VALVE_STATE",0}],[methodName:"event",params:{"rcux","MEQ0789108:4","BOOST_STATE",0}],[methodName:"event",params:{"rcux","MEQ0789108:4","ACTUAL_TEMPERATURE",24.600000}],[methodName:"event",params:{"rcux","MEQ0789108:4","SET_TEMPERATURE",18.500000}],[methodName:"event",params:{"rcux","MEQ0789108:4","PARTY_TEMPERATURE",5.000000}],[methodName:"event",params:{"rcux","MEQ0789108:4","PARTY_START_TIME",0}],[methodNa
Aug 21 09:24:49 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:24:59 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:25:09 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","MEQ0270119:2","BOOT",true}],[methodName:"event",params:{"rcux","MEQ0270119:2","ENERGY_COUNTER",194756.800000}],[methodName:"event",params:{"rcux","MEQ0270119:2","POWER",47.350000}],[methodName:"event",params:{"rcux","MEQ0270119:2","CURRENT",319.000000}],[methodName:"event",params:{"rcux","MEQ0270119:2","VOLTAGE",229.200000}],[methodName:"event",params:{"rcux","MEQ0270119:2","FREQUENCY",50.010000}],[methodName:"event",params:{"rcux","NEQ0124378:2","ACTUAL_TEMPERATURE",24.600000}],[methodName:"event",params:{"rcux","NEQ0124378:2","ACTUAL_HUMIDITY",45.000000}],[methodName:"event",params:{"rcux","NEQ0124378:2","SET_TEMPERATURE",18.500000}],[methodName:"event",params:{"rcux","NEQ0072437:2","ACTUAL_TEMPERATURE",24.500000}],[methodName:"event",params:{"rcux","NEQ0072437:2","ACTUAL_HUMIDITY",51.000000}],[methodName:"event",params:{"rcux","NEQ0072437:2","SET_TEMPERATURE",20.500000}],[methodName:"event",params:{"rcux","NEQ01
Aug 21 09:25:09 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:25:19 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:25:29 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","REQ1390511:2","BOOT",true}],[methodName:"event",params:{"rcux","REQ1390511:2","ENERGY_COUNTER",177077.400000}],[methodName:"event",params:{"rcux","REQ1390511:2","POWER",230.720000}],[methodName:"event",params:{"rcux","REQ1390511:2","CURRENT",1022.000000}],[methodName:"event",params:{"rcux","REQ1390511:2","VOLTAGE",229.900000}],[methodName:"event",params:{"rcux","REQ1390511:2","FREQUENCY",50.010000}],[methodName:"event",params:{"rcux","NEQ0117318:2","BOOT",true}],[methodName:"event",params:{"rcux","NEQ0117318:2","ENERGY_COUNTER",20942.400000}],[methodName:"event",params:{"rcux","NEQ0117318:2","POWER",6.690000}],[methodName:"event",params:{"rcux","NEQ0117318:2","CURRENT",63.000000}],[methodName:"event",params:{"rcux","NEQ0117318:2","VOLTAGE",228.900000}],[methodName:"event",params:{"rcux","NEQ0117318:2","FREQUENCY",50.010000}],[methodName:"event",params:{"rcux","NEQ0124378:1","TEMPERATURE",24.600000}],[methodName:"ev
Aug 21 09:25:29 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:25:39 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:25:49 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","MEQ0270119:2","BOOT",true}],[methodName:"event",params:{"rcux","MEQ0270119:2","ENERGY_COUNTER",194757.400000}],[methodName:"event",params:{"rcux","MEQ0270119:2","POWER",54.090000}],[methodName:"event",params:{"rcux","MEQ0270119:2","CURRENT",349.000000}],[methodName:"event",params:{"rcux","MEQ0270119:2","VOLTAGE",229.800000}],[methodName:"event",params:{"rcux","MEQ0270119:2","FREQUENCY",50.020000}],[methodName:"event",params:{"rcux","REQ1390511:2","BOOT",true}],[methodName:"event",params:{"rcux","REQ1390511:2","ENERGY_COUNTER",177079.200000}],[methodName:"event",params:{"rcux","REQ1390511:2","POWER",230.730000}],[methodName:"event",params:{"rcux","REQ1390511:2","CURRENT",1022.000000}],[methodName:"event",params:{"rcux","REQ1390511:2","VOLTAGE",229.900000}],[methodName:"event",params:{"rcux","REQ1390511:2","FREQUENCY",50.010000}],[methodName:"event",params:{"rcux","MEQ0270119:2","BOOT",true}],[methodName:"event",para
Aug 21 09:25:49 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:26:07 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:26:17 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","NEQ0071913:2","ACTUAL_TEMPERATURE",25.400000}],[methodName:"event",params:{"rcux","NEQ0071913:2","ACTUAL_HUMIDITY",50.000000}],[methodName:"event",params:{"rcux","NEQ0071913:2","SET_TEMPERATURE",19.000000}],[methodName:"event",params:{"rcux","JEQ0122686:1","TEMPERATURE",25.600000}],[methodName:"event",params:{"rcux","JEQ0122686:1","HUMIDITY",49}],[methodName:"event",params:{"rcux","MEQ0270119:2","BOOT",true}],[methodName:"event",params:{"rcux","MEQ0270119:2","ENERGY_COUNTER",194757.700000}],[methodName:"event",params:{"rcux","MEQ0270119:2","POWER",49.370000}],[methodName:"event",params:{"rcux","MEQ0270119:2","CURRENT",331.000000}],[methodName:"event",params:{"rcux","MEQ0270119:2","VOLTAGE",229.600000}],[methodName:"event",params:{"rcux","MEQ0270119:2","FREQUENCY",50.010000}],[methodName:"event",params:{"rcux","JEQ0122620:1","TEMPERATURE",24.300000}],[methodName:"event",params:{"rcux","JEQ0122620:1","HUMIDITY",55}],
Aug 21 09:26:17 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:26:27 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:26:37 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","MEQ0270119:2","BOOT",true}],[methodName:"event",params:{"rcux","MEQ0270119:2","ENERGY_COUNTER",194758.000000}],[methodName:"event",params:{"rcux","MEQ0270119:2","POWER",48.470000}],[methodName:"event",params:{"rcux","MEQ0270119:2","CURRENT",328.000000}],[methodName:"event",params:{"rcux","MEQ0270119:2","VOLTAGE",229.700000}],[methodName:"event",params:{"rcux","MEQ0270119:2","FREQUENCY",50.010000}],[methodName:"event",params:{"rcux","NEQ0071913:0","LOWBAT",true}],[methodName:"event",params:{"rcux","NEQ0071913:1","TEMPERATURE",25.400000}],[methodName:"event",params:{"rcux","NEQ0071913:1","HUMIDITY",50}],[methodName:"event",params:{"rcux","NEQ0117318:2","BOOT",true}],[methodName:"event",params:{"rcux","NEQ0117318:2","ENERGY_COUNTER",20942.500000}],[methodName:"event",params:{"rcux","NEQ0117318:2","POWER",7.020000}],[methodName:"event",params:{"rcux","NEQ0117318:2","CURRENT",65.000000}],[methodName:"event",params:{"rcu
Aug 21 09:26:37 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:26:47 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:26:57 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","NEQ0117318:2","BOOT",true}],[methodName:"event",params:{"rcux","NEQ0117318:2","ENERGY_COUNTER",20942.600000}],[methodName:"event",params:{"rcux","NEQ0117318:2","POWER",6.510000}],[methodName:"event",params:{"rcux","NEQ0117318:2","CURRENT",61.000000}],[methodName:"event",params:{"rcux","NEQ0117318:2","VOLTAGE",228.800000}],[methodName:"event",params:{"rcux","NEQ0117318:2","FREQUENCY",50.000000}],[methodName:"event",params:{"rcux","MEQ0270119:2","BOOT",true}],[methodName:"event",params:{"rcux","MEQ0270119:2","ENERGY_COUNTER",194758.400000}],[methodName:"event",params:{"rcux","MEQ0270119:2","POWER",57.140000}],[methodName:"event",params:{"rcux","MEQ0270119:2","CURRENT",362.000000}],[methodName:"event",params:{"rcux","MEQ0270119:2","VOLTAGE",229.200000}],[methodName:"event",params:{"rcux","MEQ0270119:2","FREQUENCY",50.010000}],[methodName:"event",params:{"rcux","REQ1390511:2","BOOT",true}],[methodName:"event",params:{"
Aug 21 09:26:57 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:27:10 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:27:20 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","MEQ0789108:4","CONTROL_MODE",1}],[methodName:"event",params:{"rcux","MEQ0789108:4","FAULT_REPORTING",0}],[methodName:"event",params:{"rcux","MEQ0789108:4","BATTERY_STATE",3.000000}],[methodName:"event",params:{"rcux","MEQ0789108:4","VALVE_STATE",0}],[methodName:"event",params:{"rcux","MEQ0789108:4","BOOST_STATE",0}],[methodName:"event",params:{"rcux","MEQ0789108:4","ACTUAL_TEMPERATURE",24.600000}],[methodName:"event",params:{"rcux","MEQ0789108:4","SET_TEMPERATURE",18.500000}],[methodName:"event",params:{"rcux","MEQ0789108:4","PARTY_TEMPERATURE",5.000000}],[methodName:"event",params:{"rcux","MEQ0789108:4","PARTY_START_TIME",0}],[methodName:"event",params:{"rcux","MEQ0789108:4","PARTY_START_DAY",1}],[methodName:"event",params:{"rcux","MEQ0789108:4","PARTY_START_MONTH",1}],[methodName:"event",params:{"rcux","MEQ0789108:4","PARTY_START_YEAR",0}],[methodName:"event",params:{"rcux","MEQ0789108:4","PARTY_STOP_TIME",0}],[m
Aug 21 09:27:20 ccu3-webui.fritz.box rfd: XmlRpc transport error
Wenn das nur im Log wäre wäre es ja ok ... aber das ganze blockt auch XMLRPC generell scheinbar und auch Rega (also auch die Web UI der CCU3) ist geblockt.Nichts lädt. AUch die cuxd seite an sich lät nicht. Auch zB iobroker der mit binrpc gegen cuxd connecten will bekommt nichts. Komplett geblockt

Wenn ich cuxd dann stoppe (oder restarte - da aber nur kurz) kommt zb im Log:

Code: Alles auswählen

Aug 21 09:29:59 ccu3-webui.fritz.box cuxd[17730]: Received SIGHUP signal.
Aug 21 09:29:59 ccu3-webui.fritz.box cuxd[17730]: save paramsets(/usr/local/addons/cuxd/cuxd.ps) size:22856
Aug 21 09:29:59 ccu3-webui.fritz.box cuxd[17730]: TTY(/ttyTCP0)  disconnect
Aug 21 09:29:59 ccu3-webui.fritz.box cuxd[17730]: TTY(/ttyTCP1)  disconnect
Aug 21 09:29:59 ccu3-webui.fritz.box cuxd[17730]: TTY(/ttyTCP2)  disconnect
Aug 21 09:29:59 ccu3-webui.fritz.box cuxd[17730]: USB(1-1.5/ttyACM0) CUL868 disconnect
Aug 21 09:29:59 ccu3-webui.fritz.box ReGaHss: ERROR: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [error():iseXmlRpc.h:281]
Aug 21 09:29:59 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'setValue': rpcClient.execute() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX4000003:1","PRESS_SHORT",true}, result: nil) [CallXmlrpcMethod():iseXmlRpc.cpp:2602]
Aug 21 09:29:59 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'setValue' call failed (interface: 1272, params: {"CUX4000003:1","PRESS_SHORT",true}) [CallSetValue():iseXmlRpc.cpp:1505]
Aug 21 09:29:59 ccu3-webui.fritz.box ReGaHss: ERROR: rpc.CallSetValue failed; address = CUX4000003:1 [WriteValue():iseDOMdpHSS.cpp:76]
Aug 21 09:29:59 ccu3-webui.fritz.box cuxd.pty2tcp: start (26796) /var/run/pty.ttyTCP0.pid
Aug 21 09:29:59 ccu3-webui.fritz.box cuxd.pty2tcp: start (26801) /var/run/pty.ttyTCP1.pid
Aug 21 09:29:59 ccu3-webui.fritz.box ReGaHss: ERROR: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [error():iseXmlRpc.h:281]
Aug 21 09:29:59 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'setValue': rpcClient.execute() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX9002011:1","SET_HUMIDITY",43.000000}, result: nil) [CallXmlrpcMethod():iseXmlRpc.cpp:2602]
Aug 21 09:29:59 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'setValue' call failed (interface: 1272, params: {"CUX9002011:1","SET_HUMIDITY",43.000000}) [CallSetValue():iseXmlRpc.cpp:1505]
Aug 21 09:29:59 ccu3-webui.fritz.box ReGaHss: ERROR: rpc.CallSetValue failed; address = CUX9002011:1 [WriteValue():iseDOMdpHSS.cpp:76]
Aug 21 09:30:00 ccu3-webui.fritz.box ReGaHss: ERROR: XmlRpc: Error in XmlRpcClient::writeRequest: write error (error 111). [error():iseXmlRpc.h:281]
Aug 21 09:30:00 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'setValue': rpcClient.execute() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX4000003:1","PRESS_SHORT",true}, result: nil) [CallXmlrpcMethod():iseXmlRpc.cpp:2602]
Aug 21 09:30:00 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'setValue' call failed (interface: 1272, params: {"CUX4000003:1","PRESS_SHORT",true}) [CallSetValue():iseXmlRpc.cpp:1505]
Aug 21 09:30:00 ccu3-webui.fritz.box ReGaHss: ERROR: rpc.CallSetValue failed; address = CUX4000003:1 [WriteValue():iseDOMdpHSS.cpp:76]
Aug 21 09:30:00 ccu3-webui.fritz.box cuxd: stopped cux-daemon
Aug 21 09:30:00 ccu3-webui.fritz.box cuxd[26812]: CUx-Daemon(2.9.4) on CCU(3.65.8) start PID:26812
Aug 21 09:30:00 ccu3-webui.fritz.box cuxd[26812]: write_pid /var/run/cuxd.pid [26812]
Aug 21 09:30:00 ccu3-webui.fritz.box cuxd: started (restart) cux-daemon
Aug 21 09:30:00 ccu3-webui.fritz.box cuxd.pty2tcp: kill -HUP (26796)
Aug 21 09:30:01 ccu3-webui.fritz.box cuxd[26812]: system(extra/pty2tcp start ttyTCP0 192.168.178.40:2201 keepalive,keepidle=30,keepcnt=3,keepintvl=10)
Aug 21 09:30:01 ccu3-webui.fritz.box cuxd.pty2tcp: start (26835) /var/run/pty.ttyTCP0.pid
Aug 21 09:30:02 ccu3-webui.fritz.box cuxd.pty2tcp: kill -HUP (26801)
Aug 21 09:30:03 ccu3-webui.fritz.box cuxd[26812]: system(extra/pty2tcp start ttyTCP1 192.168.178.40:2203 keepalive,keepidle=30,keepcnt=3,keepintvl=10)
Aug 21 09:30:03 ccu3-webui.fritz.box cuxd.pty2tcp: start (26862) /var/run/pty.ttyTCP1.pid
Aug 21 09:30:03 ccu3-webui.fritz.box cuxd.pty2tcp: kill -HUP (17801)
Aug 21 09:30:04 ccu3-webui.fritz.box cuxd[26812]: system(extra/pty2tcp start ttyTCP2 192.168.178.40:2202 keepalive,keepidle=30,keepcnt=3,keepintvl=10)
Aug 21 09:30:04 ccu3-webui.fritz.box cuxd[26812]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:22856 update(-5s):Sun Aug 21 09:29:59 2022
Aug 21 09:30:04 ccu3-webui.fritz.box cuxd.pty2tcp: start (26895) /var/run/pty.ttyTCP2.pid
Aug 21 09:30:04 ccu3-webui.fritz.box cuxd[26812]: 49 device-paramset(s) loaded ok!
Aug 21 09:30:04 ccu3-webui.fritz.box cuxd[26812]: write_proxy /var/cache/cuxd_proxy.ini (26812 /usr/local/addons/cuxd/ 2.9.4 3.65.8 0)
Aug 21 09:30:04 ccu3-webui.fritz.box cuxd[26812]: RPC-server from HM-CCU (1272) registered!
Aug 21 09:30:04 ccu3-webui.fritz.box cuxd[26812]: TTY(/ttyTCP0)  connect(9600:8N1)
Aug 21 09:30:07 ccu3-webui.fritz.box cuxd[26812]: TTY(/ttyTCP1)  connect(9600:8N1)
Aug 21 09:30:10 ccu3-webui.fritz.box cuxd[26812]: TTY(/ttyTCP2)  connect(9600:8N1)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: USB(1-1.5/ttyACM0) CUL868 connect(9600:8N1)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9000001:1 read(CUX-SYSTEM:0) => CUxD.CUX-SYSTEM:0 (SYSTEM) DP(|CPU10|LAVG1M|LAVG5M|LAVG15M|PROCS|CUXDMEM|MEMUSED|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9000002:1 read(CUX-SYSTEM:0) => CUxD.CUX-SYSTEM:0 (SYSTEM) DP(|CPU10|LAVG1M|LAVG5M|LAVG15M|PROCS|CUXDMEM|MEMUSED|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9000003:1 read(CUX-SYSTEM:0) => CUxD.CUX-SYSTEM:0 (SYSTEM) DP(|CPU10|LAVG1M|LAVG5M|LAVG15M|PROCS|CUXDMEM|MEMUSED|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9000004:1 read(CUX-SYSTEM:0) => CUxD.CUX-SYSTEM:0 (SYSTEM) DP(|CPU10|LAVG1M|LAVG5M|LAVG15M|PROCS|CUXDMEM|MEMUSED|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9000005:1 read(CUX-SYSTEM:0) => CUxD.CUX-SYSTEM:0 (SYSTEM) DP(|CPU10|LAVG1M|LAVG5M|LAVG15M|PROCS|CUXDMEM|MEMUSED|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9002001:1 read(JEQ0122620:1) => BidCos-RF.JEQ0122620:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9002002:1 read(KEQ0850196:1) => BidCos-RF.KEQ0850196:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9002003:1 read(JEQ0122713:1) => BidCos-RF.JEQ0122713:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9002004:1 read(KEQ0765986:1) => BidCos-RF.KEQ0765986:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9002005:1 read(QEQ1860372:1) => BidCos-RF.QEQ1860372:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9002006:1 read(KEQ0850700:1) => BidCos-RF.KEQ0850700:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9002007:1 read(KEQ0850562:1) => BidCos-RF.KEQ0850562:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9002008:1 read(JEQ0122686:1) => BidCos-RF.JEQ0122686:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9002009:1 read(JEQ0122680:1) => BidCos-RF.JEQ0122680:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9002010:1 read(KEQ0004930:1) => BidCos-RF.KEQ0004930:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: setup CUX9002013:1 read(LEQ0122925:1) => BidCos-RF.LEQ0122925:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:30:13 ccu3-webui.fritz.box cuxd[26812]: connection to 127.0.0.1:8183 successfull!
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support system.listMethods
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support system.methodHelp
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support init
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support listDevices
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support deleteDevice
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support getDeviceDescription
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support getParamsetDescription
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support getParamset
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support putParamset
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support getValue
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support setValue
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support reportValueUsage
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support listReplaceableDevices
Aug 21 09:30:14 ccu3-webui.fritz.box rfd: rcux support ping
aber dan gehts direkt wieder los.

Ich habe dann ersmal cuxd und ccu auf das aktuellste aktualisiert ... leider ohne änderung.

Der letzte Log eines Reboots sieht so aus

Code: Alles auswählen

Aug 21 09:05:32 ccu3-webui.fritz.box kernel: [   38.323967] NET: Registered protocol family 10
Aug 21 09:05:32 ccu3-webui.fritz.box kernel: [   38.325741] Segment Routing with IPv6
Aug 21 09:05:33 ccu3-webui.fritz.box kernel: [   38.621989] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Aug 21 09:05:33 ccu3-webui.fritz.box kernel: [   39.120684] ip6_tables: (C) 2000-2006 Netfilter Core Team
Aug 21 09:05:34 ccu3-webui.fritz.box firewall: configuration set
Aug 21 09:05:34 ccu3-webui.fritz.box rfkill: block set for type wlan
Aug 21 09:05:34 ccu3-webui.fritz.box ifplugd(eth0)[540]: ifplugd 0.28 initializing.
Aug 21 09:05:34 ccu3-webui.fritz.box ifplugd(eth0)[540]: Using interface eth0/B8:27:EB:FF:FE:B6 with driver <smsc95xx> (version: 22-Aug-2005)
Aug 21 09:05:34 ccu3-webui.fritz.box ifplugd(eth0)[540]: Using detection mode: SIOCETHTOOL
Aug 21 09:05:34 ccu3-webui.fritz.box ifplugd(eth0)[540]: Initialization complete, link beat detected.
Aug 21 09:05:34 ccu3-webui.fritz.box ifplugd(wlan0)[544]: ifplugd 0.28 initializing, using NETLINK device monitoring.
Aug 21 09:05:34 ccu3-webui.fritz.box ifplugd(wlan0)[544]: Using interface wlan0/B8:27:EB:AA:AB:E3 with driver <brcmfmac> (version: 7.45.98.38)
Aug 21 09:05:34 ccu3-webui.fritz.box ifplugd(wlan0)[544]: Using detection mode: wireless extension
Aug 21 09:05:34 ccu3-webui.fritz.box ifplugd(wlan0)[544]: Initialization complete, link beat not detected, interface enabled.
Aug 21 09:05:34 ccu3-webui.fritz.box ifplugd(eth0)[540]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Aug 21 09:05:34 ccu3-webui.fritz.box ifplugd(eth0)[540]: client: ifup: interface eth0 already configured
Aug 21 09:05:34 ccu3-webui.fritz.box ifplugd(eth0)[540]: Program executed successfully.
Aug 21 09:05:41 ccu3-webui.fritz.box ntpdate[552]: step time server 192.168.178.1 offset 0.544301 sec
Aug 21 09:05:41 ccu3-webui.fritz.box ntpd[553]: ntpd 4.2.8p12@1.3728-o Thu Jul 14 12:42:17 CEST 2022 (1): Starting
Aug 21 09:05:41 ccu3-webui.fritz.box ntpd[553]: Command line: /usr/sbin/ntpd -g 192.168.178.1
Aug 21 09:05:41 ccu3-webui.fritz.box ntpd[555]: proto: precision = 0.520 usec (-21)
Aug 21 09:05:41 ccu3-webui.fritz.box ntpd[555]: Listen and drop on 0 v6wildcard [::]:123
Aug 21 09:05:41 ccu3-webui.fritz.box ntpd[555]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Aug 21 09:05:41 ccu3-webui.fritz.box ntpd[555]: Listen normally on 2 lo 127.0.0.1:123
Aug 21 09:05:41 ccu3-webui.fritz.box ntpd[555]: Listen normally on 3 eth0 192.168.178.27:123
Aug 21 09:05:41 ccu3-webui.fritz.box ntpd[555]: Listen normally on 4 lo [::1]:123
Aug 21 09:05:41 ccu3-webui.fritz.box ntpd[555]: Listen normally on 5 eth0 [fe80::ba27:ebff:feff:feb6%2]:123
Aug 21 09:05:41 ccu3-webui.fritz.box ntpd[555]: Listening on routing socket on fd #22 for interface updates
Aug 21 09:05:41 ccu3-webui.fritz.box ntpd[555]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
Aug 21 09:05:41 ccu3-webui.fritz.box ntpd[555]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
Aug 21 09:05:41 ccu3-webui.fritz.box xinetd[575]: Unable to read included directory: /etc/config/xinetd.d [file=/etc/xinetd.conf] [line=14]
Aug 21 09:05:41 ccu3-webui.fritz.box xinetd[575]: 575 {init_services} no services. Exiting...
Aug 21 09:05:41 ccu3-webui.fritz.box sshd[602]: Server listening on 0.0.0.0 port 22.
Aug 21 09:05:41 ccu3-webui.fritz.box sshd[602]: Server listening on :: port 22.
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: CUx-Daemon(2.9.4) on CCU(3.65.8) start PID:628
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: write_pid /var/run/cuxd.pid [628]
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd: started cux-daemon
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: system(extra/pty2tcp start ttyTCP0 192.168.178.40:2201 keepalive,keepidle=30,keepcnt=3,keepintvl=10)
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd.pty2tcp: start (655) /var/run/pty.ttyTCP0.pid
Aug 21 09:05:42 ccu3-webui.fritz.box root: Updating RF Lan Gateway Coprocessor Firmware
Aug 21 09:05:42 ccu3-webui.fritz.box update-coprocessor: firmware filename is: coprocessor_update_hm_only.eq3
Aug 21 09:05:42 ccu3-webui.fritz.box update-coprocessor: performGatewayCoproUpdate(): updating CCU2GW0001
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: system(extra/pty2tcp start ttyTCP1 192.168.178.40:2203 keepalive,keepidle=30,keepcnt=3,keepintvl=10)
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd.pty2tcp: start (679) /var/run/pty.ttyTCP1.pid
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: system(extra/pty2tcp start ttyTCP2 192.168.178.40:2202 keepalive,keepidle=30,keepcnt=3,keepintvl=10)
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd.pty2tcp: start (698) /var/run/pty.ttyTCP2.pid
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: load paramsets(/usr/local/addons/cuxd/cuxd.ps) size:22846 update(-518s):Sun Aug 21 08:57:04 2022
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: 49 device-paramset(s) loaded ok!
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: write_proxy /var/cache/cuxd_proxy.ini (628 /usr/local/addons/cuxd/ 2.9.4 3.65.8 0)
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: add interface 'CUxD'
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: write interface(1) 'BidCos-RF' to /usr/local/etc/config/InterfacesList.xml
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: write interface(2) 'VirtualDevices' to /usr/local/etc/config/InterfacesList.xml
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: write interface(3) 'HmIP-RF' to /usr/local/etc/config/InterfacesList.xml
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: write interface(4) 'CUxD' to /usr/local/etc/config/InterfacesList.xml
Aug 21 09:05:42 ccu3-webui.fritz.box cuxd[628]: TTY(/ttyTCP0)  connect(9600:8N1)
Aug 21 09:05:44 ccu3-webui.fritz.box update-coprocessor: Could not find gateway by unicast with ip 192.168.178.199. Trying search by serial number.
Aug 21 09:05:45 ccu3-webui.fritz.box cuxd[628]: TTY(/ttyTCP1)  connect(9600:8N1)
Aug 21 09:05:48 ccu3-webui.fritz.box cuxd[628]: TTY(/ttyTCP2)  connect(9600:8N1)
Aug 21 09:05:51 ccu3-webui.fritz.box cuxd[628]: USB(1-1.5/ttyACM0) CUL868 connect(9600:8N1)
Aug 21 09:05:52 ccu3-webui.fritz.box update-coprocessor: Could not find Lan Gateway using ip and serial number
Aug 21 09:05:52 ccu3-webui.fritz.box update-coprocessor: UnifiedLanCommController::connect(): Unable to connect.
Aug 21 09:05:52 ccu3-webui.fritz.box update-coprocessor: Could not connect to Lan Gateway ip: 192.168.178.199.
Aug 21 09:05:52 ccu3-webui.fritz.box update-coprocessor: performGatewayCoproUpdate(): updating MEQ0460709
Aug 21 09:05:54 ccu3-webui.fritz.box update-coprocessor: Lan Device Information:#012Protocol-Version: 1#012Product-ID: eQ3-HM-LGW#012Firmware-Version: 1.1.5#012Serial Number: MEQ0460709
Aug 21 09:05:54 ccu3-webui.fritz.box update-coprocessor: Lan Device Information:#012Protocol-Version: 1#012Product-ID: eQ3-HM-LGW#012Firmware-Version: 1.1.5#012Serial Number: MEQ0460709
Aug 21 09:05:55 ccu3-webui.fritz.box update-coprocessor: (MEQ0460709) CCU2CommControllerMod::handleIdentifyEvent(): Coprocessor is in application.
Aug 21 09:05:55 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): System frame
Aug 21 09:05:55 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::isResponseStatusOk(): System status OK
Aug 21 09:05:55 ccu3-webui.fritz.box update-coprocessor: CCU2CommControllerMod::handleIncomingResponse() System response OK
Aug 21 09:05:55 ccu3-webui.fritz.box update-coprocessor: (MEQ0460709) CCU2CommControllerMod::handleIdentifyEvent(): Coprocessor is in application.
Aug 21 09:05:55 ccu3-webui.fritz.box update-coprocessor: CoprocessorUpdate::startApplication():Coprocessor entered application.
Aug 21 09:05:56 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:05:56 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): System frame
Aug 21 09:05:56 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::isResponseStatusOk(): System status OK
Aug 21 09:05:56 ccu3-webui.fritz.box update-coprocessor: CCU2CommControllerMod::handleIncomingResponse() System response OK
Aug 21 09:05:56 ccu3-webui.fritz.box update-coprocessor: Version: 1.4.1
Aug 21 09:05:56 ccu3-webui.fritz.box update-coprocessor: Coprocessor firmware not necessary.
Aug 21 09:05:56 ccu3-webui.fritz.box update-coprocessor: performGatewayCoproUpdate(): updating NEQ0382194
Aug 21 09:05:56 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:05:58 ccu3-webui.fritz.box update-coprocessor: message repeated 2 times: [ CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame]
Aug 21 09:05:58 ccu3-webui.fritz.box update-coprocessor: Lan Device Information:#012Protocol-Version: 1#012Product-ID: eQ3-HM-LGW#012Firmware-Version: 1.1.5#012Serial Number: NEQ0382194
Aug 21 09:05:58 ccu3-webui.fritz.box update-coprocessor: Lan Device Information:#012Protocol-Version: 1#012Product-ID: eQ3-HM-LGW#012Firmware-Version: 1.1.5#012Serial Number: NEQ0382194
Aug 21 09:05:59 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:00 ccu3-webui.fritz.box update-coprocessor: (NEQ0382194) CCU2CommControllerMod::handleIdentifyEvent(): Coprocessor is in application.
Aug 21 09:06:00 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): System frame
Aug 21 09:06:00 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::isResponseStatusOk(): System status OK
Aug 21 09:06:00 ccu3-webui.fritz.box update-coprocessor: CCU2CommControllerMod::handleIncomingResponse() System response OK
Aug 21 09:06:00 ccu3-webui.fritz.box update-coprocessor: (NEQ0382194) CCU2CommControllerMod::handleIdentifyEvent(): Coprocessor is in application.
Aug 21 09:06:00 ccu3-webui.fritz.box update-coprocessor: CoprocessorUpdate::startApplication():Coprocessor entered application.
Aug 21 09:06:00 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): System frame
Aug 21 09:06:00 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::isResponseStatusOk(): System status OK
Aug 21 09:06:00 ccu3-webui.fritz.box update-coprocessor: CCU2CommControllerMod::handleIncomingResponse() System response OK
Aug 21 09:06:00 ccu3-webui.fritz.box update-coprocessor: Version: 1.4.1
Aug 21 09:06:00 ccu3-webui.fritz.box update-coprocessor: Coprocessor firmware not necessary.
Aug 21 09:06:00 ccu3-webui.fritz.box update-coprocessor: performGatewayCoproUpdate(): updating MEQ0836418
Aug 21 09:06:02 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:02 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:02 ccu3-webui.fritz.box update-coprocessor: Lan Device Information:#012Protocol-Version: 1#012Product-ID: Revilo-HM-LGW#012Firmware-Version: 0.0.2#012Serial Number: MEQ0836418
Aug 21 09:06:02 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:02 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:02 ccu3-webui.fritz.box update-coprocessor: Lan Device Information:#012Protocol-Version: 1#012Product-ID: Revilo-HM-LGW#012Firmware-Version: 0.0.2#012Serial Number: MEQ0836418
Aug 21 09:06:03 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:03 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:03 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: message repeated 5 times: [ CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame]
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: (MEQ0836418) CCU2CommControllerMod::handleIdentifyEvent(): Coprocessor is in bootloader.
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): System frame
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::isResponseStatusOk(): System status OK
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CommControllerMod::handleIncomingResponse() System response OK
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: (MEQ0836418) CCU2CommControllerMod::handleIdentifyEvent(): Coprocessor is in bootloader.
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: (MEQ0836418) CCU2CommControllerMod::startCoprocessorApp(): Trying to start coprocessor application
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CommControllerMod::sendSystemCommand(): Start Application / Bootloader
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): System frame
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::isResponseStatusOk(): System status OK
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CommControllerMod::handleIncomingResponse() System response OK
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): System frame
Aug 21 09:06:04 ccu3-webui.fritz.box update-coprocessor: (MEQ0836418) CCU2CommControllerMod::handleIdentifyEvent(): Coprocessor is in application.
Aug 21 09:06:05 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:05 ccu3-webui.fritz.box update-coprocessor: CoprocessorUpdate::startApplication():Coprocessor entered application.
Aug 21 09:06:05 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame
Aug 21 09:06:05 ccu3-webui.fritz.box update-coprocessor: message repeated 2 times: [ CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): Bidcos frame]
Aug 21 09:06:05 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::CCU2CoprocessorCommandMod(): System frame
Aug 21 09:06:05 ccu3-webui.fritz.box update-coprocessor: CCU2CoprocessorCommandMod::isResponseStatusOk(): System status OK
Aug 21 09:06:05 ccu3-webui.fritz.box update-coprocessor: CCU2CommControllerMod::handleIncomingResponse() System response OK
Aug 21 09:06:05 ccu3-webui.fritz.box update-coprocessor: Version: 1.4.1
Aug 21 09:06:05 ccu3-webui.fritz.box update-coprocessor: Coprocessor firmware not necessary.
Aug 21 09:06:05 ccu3-webui.fritz.box root: Updating RF Lan Gateway Firmware
Aug 21 09:06:06 ccu3-webui.fritz.box update-lgw-firmware: LAN Gateway Firmware Update...
Aug 21 09:06:06 ccu3-webui.fritz.box update-lgw-firmware: Gateway CCU2GW0001
Aug 21 09:06:08 ccu3-webui.fritz.box update-lgw-firmware: Could not find gateway by unicast with ip 192.168.178.199. Trying search by serial number.
Aug 21 09:06:16 ccu3-webui.fritz.box update-lgw-firmware: Could not find Lan Gateway using ip and serial number
Aug 21 09:06:16 ccu3-webui.fritz.box update-lgw-firmware: LAN Gateway Firmware Update...
Aug 21 09:06:16 ccu3-webui.fritz.box update-lgw-firmware: Gateway MEQ0460709
Aug 21 09:06:18 ccu3-webui.fritz.box update-lgw-firmware: Gateway type is eQ3-HM-LGW-App
Aug 21 09:06:18 ccu3-webui.fritz.box update-lgw-firmware: Available Firmware Version:   1.1.5
Aug 21 09:06:18 ccu3-webui.fritz.box update-lgw-firmware: Lan Gateway Firmware Version: 1.1.5
Aug 21 09:06:18 ccu3-webui.fritz.box update-lgw-firmware: Firmware is up to date
Aug 21 09:06:18 ccu3-webui.fritz.box update-lgw-firmware: LAN Gateway Firmware Update...
Aug 21 09:06:18 ccu3-webui.fritz.box update-lgw-firmware: Gateway NEQ0382194
Aug 21 09:06:20 ccu3-webui.fritz.box update-lgw-firmware: Gateway type is eQ3-HM-LGW-App
Aug 21 09:06:20 ccu3-webui.fritz.box update-lgw-firmware: Available Firmware Version:   1.1.5
Aug 21 09:06:20 ccu3-webui.fritz.box update-lgw-firmware: Lan Gateway Firmware Version: 1.1.5
Aug 21 09:06:20 ccu3-webui.fritz.box update-lgw-firmware: Firmware is up to date
Aug 21 09:06:20 ccu3-webui.fritz.box update-lgw-firmware: LAN Gateway Firmware Update...
Aug 21 09:06:20 ccu3-webui.fritz.box update-lgw-firmware: Gateway MEQ0836418
Aug 21 09:06:22 ccu3-webui.fritz.box update-lgw-firmware: Gateway type is eQ3-HmIP-CCU3-App
Aug 21 09:06:22 ccu3-webui.fritz.box update-lgw-firmware: Wrong type of gateway. Should be HMLGW2, but found 
Aug 21 09:06:22 ccu3-webui.fritz.box kernel: [   87.000600] eq3loop: created slave mmd_hmip
Aug 21 09:06:22 ccu3-webui.fritz.box kernel: [   87.000883] eq3loop: created slave mmd_bidcos
Aug 21 09:06:22 ccu3-webui.fritz.box multimac: Copro application running.
Aug 21 09:06:22 ccu3-webui.fritz.box multimac: Vapp=040416 Vbl=010001 Vhmos=014200
Aug 21 09:06:22 ccu3-webui.fritz.box multimac: SGTIN=30 14 F7 11 A0 00 1F 9D 89 AB 28 C8
Aug 21 09:06:22 ccu3-webui.fritz.box multimac: RF address=7798420
Aug 21 09:06:22 ccu3-webui.fritz.box multimac: Serial Number=SEQ2212040
Aug 21 09:06:22 ccu3-webui.fritz.box multimac: Timer=23112
Aug 21 09:06:24 ccu3-webui.fritz.box rfd: BidCoS-Service started
Aug 21 09:06:24 ccu3-webui.fritz.box rfd: XmlRpc Server is listening on TCP port 32001
Aug 21 09:06:24 ccu3-webui.fritz.box kernel: [   89.145898] eq3loop: eq3loop_open_slave() mmd_bidcos
Aug 21 09:06:24 ccu3-webui.fritz.box rfd: CCU2CommController::init(): Coprocessor Bootloader Version is: 1.0.1
Aug 21 09:06:24 ccu3-webui.fritz.box rfd: CCU2CommController::init(): Coprocessor Firmware Version is: 4.4.22
Aug 21 09:06:24 ccu3-webui.fritz.box rfd: () CCU2CommController::setCSMACAEnabled(): CSMA/CA disabled.
Aug 21 09:06:24 ccu3-webui.fritz.box rfd: Lan Device Information:#012Protocol-Version: 1#012Product-ID: Revilo-HM-LGW#012Firmware-Version: 0.0.2#012Serial Number: CCU2GW0001
Aug 21 09:06:24 ccu3-webui.fritz.box rfd: Lan Device Information:#012Protocol-Version: 1#012Product-ID: Revilo-HM-LGW#012Firmware-Version: 0.0.2#012Serial Number: CCU2GW0001
Aug 21 09:06:25 ccu3-webui.fritz.box rfd: CCU2CommController::init(): Coprocessor Bootloader Version is: 1.0.5
Aug 21 09:06:25 ccu3-webui.fritz.box rfd: CCU2CommController::init(): Coprocessor Firmware Version is: 1.4.1
Aug 21 09:06:25 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::setCSMACAEnabled(): CSMA/CA disabled.
Aug 21 09:06:25 ccu3-webui.fritz.box rfd: Lan Device Information:#012Protocol-Version: 1#012Product-ID: eQ3-HM-LGW#012Firmware-Version: 1.1.5#012Serial Number: MEQ0460709
Aug 21 09:06:25 ccu3-webui.fritz.box rfd: Lan Device Information:#012Protocol-Version: 1#012Product-ID: eQ3-HM-LGW#012Firmware-Version: 1.1.5#012Serial Number: MEQ0460709
Aug 21 09:06:26 ccu3-webui.fritz.box rfd: CCU2CommController::init(): Coprocessor Bootloader Version is: 1.0.4
Aug 21 09:06:26 ccu3-webui.fritz.box rfd: CCU2CommController::init(): Coprocessor Firmware Version is: 1.4.1
Aug 21 09:06:26 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::setCSMACAEnabled(): CSMA/CA disabled.
Aug 21 09:06:26 ccu3-webui.fritz.box rfd: Lan Device Information:#012Protocol-Version: 1#012Product-ID: eQ3-HM-LGW#012Firmware-Version: 1.1.5#012Serial Number: NEQ0382194
Aug 21 09:06:26 ccu3-webui.fritz.box rfd: Lan Device Information:#012Protocol-Version: 1#012Product-ID: eQ3-HM-LGW#012Firmware-Version: 1.1.5#012Serial Number: NEQ0382194
Aug 21 09:06:26 ccu3-webui.fritz.box rfd: CCU2CommController::init(): Coprocessor Bootloader Version is: 1.0.4
Aug 21 09:06:26 ccu3-webui.fritz.box rfd: CCU2CommController::init(): Coprocessor Firmware Version is: 1.4.1
Aug 21 09:06:26 ccu3-webui.fritz.box rfd: (NEQ0382194) CCU2CommController::setCSMACAEnabled(): CSMA/CA disabled.
Aug 21 09:06:26 ccu3-webui.fritz.box rfd: Lan Device Information:#012Protocol-Version: 1#012Product-ID: Revilo-HM-LGW#012Firmware-Version: 0.0.2#012Serial Number: MEQ0836418
Aug 21 09:06:27 ccu3-webui.fritz.box rfd: Lan Device Information:#012Protocol-Version: 1#012Product-ID: Revilo-HM-LGW#012Firmware-Version: 0.0.2#012Serial Number: MEQ0836418
Aug 21 09:06:27 ccu3-webui.fritz.box rfd: CCU2CommController::init(): Coprocessor Bootloader Version is: 1.0.3
Aug 21 09:06:27 ccu3-webui.fritz.box rfd: CCU2CommController::init(): Coprocessor Firmware Version is: 1.4.1
Aug 21 09:06:28 ccu3-webui.fritz.box rfd: (MEQ0836418) CCU2CommController::setCSMACAEnabled(): CSMA/CA disabled.
Aug 21 09:06:28 ccu3-webui.fritz.box rfd: Current AES key=0, previous AES key=0
Aug 21 09:06:35 ccu3-webui.fritz.box rfd: BidcosRemoteInterface::AddDevice(): Adding device remotely failed.
Aug 21 09:06:36 ccu3-webui.fritz.box rfd: CCU2BidcosRemoteInterface::SetDeviceAesPolicy(): Error disabling channel authentication.
Aug 21 09:06:54 ccu3-webui.fritz.box kernel: [  119.523219] eq3loop: eq3loop_open_slave() mmd_hmip
Aug 21 09:06:54 ccu3-webui.fritz.box kernel: [  119.523365] eq3loop: eq3loop_close_slave() mmd_hmip
Aug 21 09:06:54 ccu3-webui.fritz.box kernel: [  119.526140] eq3loop: eq3loop_open_slave() mmd_hmip
Aug 21 09:06:54 ccu3-webui.fritz.box kernel: [  119.526267] eq3loop: eq3loop_close_slave() mmd_hmip
Aug 21 09:06:54 ccu3-webui.fritz.box kernel: [  119.526870] eq3loop: eq3loop_open_slave() mmd_hmip
Aug 21 09:06:54 ccu3-webui.fritz.box kernel: [  119.526944] eq3loop: eq3loop_close_slave() mmd_hmip
Aug 21 09:06:54 ccu3-webui.fritz.box kernel: [  119.535980] eq3loop: eq3loop_open_slave() mmd_hmip
Aug 21 09:07:01 ccu3-webui.fritz.box cuxd[628]: process_rpc_request(127.0.0.1) - illegal XMLRPC(listDevices) request
Aug 21 09:07:03 ccu3-webui.fritz.box cuxd[628]: process_rpc_request(127.0.0.1) - illegal XMLRPC(init) request
Aug 21 09:07:03 ccu3-webui.fritz.box rfd: BidCos-RF_java support system.methodHelp
Aug 21 09:07:03 ccu3-webui.fritz.box rfd: BidCos-RF_java support system.multicall
Aug 21 09:07:03 ccu3-webui.fritz.box rfd: BidCos-RF_java support updateDevice
Aug 21 09:07:03 ccu3-webui.fritz.box rfd: BidCos-RF_java support deleteDevices
Aug 21 09:07:03 ccu3-webui.fritz.box rfd: BidCos-RF_java support newDevices
Aug 21 09:07:03 ccu3-webui.fritz.box rfd: BidCos-RF_java support firmwareUpdateStatusChanged
Aug 21 09:07:03 ccu3-webui.fritz.box rfd: BidCos-RF_java support replaceDevice
Aug 21 09:07:03 ccu3-webui.fritz.box rfd: yes support replace device
Aug 21 09:07:03 ccu3-webui.fritz.box rfd: BidCos-RF_java support readdedDevice
Aug 21 09:07:03 ccu3-webui.fritz.box rfd: BidCos-RF_java support system.listMethods
Aug 21 09:07:03 ccu3-webui.fritz.box rfd: BidCos-RF_java support event
Aug 21 09:07:03 ccu3-webui.fritz.box rfd: BidCos-RF_java support listDevices
Aug 21 09:07:23 ccu3-webui.fritz.box rfd: 1007 support deleteDevices
Aug 21 09:07:23 ccu3-webui.fritz.box rfd: 1007 support event
Aug 21 09:07:23 ccu3-webui.fritz.box rfd: 1007 support listDevices
Aug 21 09:07:23 ccu3-webui.fritz.box rfd: 1007 support newDevices
Aug 21 09:07:23 ccu3-webui.fritz.box rfd: 1007 support replaceDevice
Aug 21 09:07:23 ccu3-webui.fritz.box rfd: yes support replace device
Aug 21 09:07:23 ccu3-webui.fritz.box rfd: 1007 support reportValueUsage
Aug 21 09:07:23 ccu3-webui.fritz.box rfd: 1007 support setReadyConfig
Aug 21 09:07:23 ccu3-webui.fritz.box rfd: 1007 support system.listMethods
Aug 21 09:07:23 ccu3-webui.fritz.box rfd: 1007 support system.methodHelp
Aug 21 09:07:23 ccu3-webui.fritz.box rfd: 1007 support updateDevice
Aug 21 09:07:23 ccu3-webui.fritz.box rfd: 1007 support system.multicall
Aug 21 09:07:23 ccu3-webui.fritz.box cuxd[628]: INIT 'xmlrpc_bin://127.0.0.1:31999' '1272'
Aug 21 09:07:23 ccu3-webui.fritz.box cuxd[628]: RPC-server from HM-CCU (1272) registered!
Aug 21 09:07:23 ccu3-webui.fritz.box multimac: ACK received after 0 repetitions: #01[BiDi|BC|Ren] 37D2C0->1F8AAC EnergySpontaenous: 88 66 35 00 00 17 00 35 08 FD 01
Aug 21 09:07:24 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:24 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:24 ccu3-webui.fritz.box multimac: ACK received after 0 repetitions: #71[BiDi|BC|Ren] 37C341->1F8AAC EnergySpontaenous: 9D B7 17 00 14 8C 01 5D 08 FB 01
Aug 21 09:07:25 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:25 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9000001:1 read(CUX-SYSTEM:0) => CUxD.CUX-SYSTEM:0 (SYSTEM) DP(|CPU10|LAVG1M|LAVG5M|LAVG15M|PROCS|CUXDMEM|MEMUSED|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9000002:1 read(CUX-SYSTEM:0) => CUxD.CUX-SYSTEM:0 (SYSTEM) DP(|CPU10|LAVG1M|LAVG5M|LAVG15M|PROCS|CUXDMEM|MEMUSED|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9000003:1 read(CUX-SYSTEM:0) => CUxD.CUX-SYSTEM:0 (SYSTEM) DP(|CPU10|LAVG1M|LAVG5M|LAVG15M|PROCS|CUXDMEM|MEMUSED|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9000004:1 read(CUX-SYSTEM:0) => CUxD.CUX-SYSTEM:0 (SYSTEM) DP(|CPU10|LAVG1M|LAVG5M|LAVG15M|PROCS|CUXDMEM|MEMUSED|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9000005:1 read(CUX-SYSTEM:0) => CUxD.CUX-SYSTEM:0 (SYSTEM) DP(|CPU10|LAVG1M|LAVG5M|LAVG15M|PROCS|CUXDMEM|MEMUSED|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9002001:1 read(JEQ0122620:1) => BidCos-RF.JEQ0122620:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9002002:1 read(KEQ0850196:1) => BidCos-RF.KEQ0850196:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9002003:1 read(JEQ0122713:1) => BidCos-RF.JEQ0122713:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9002004:1 read(KEQ0765986:1) => BidCos-RF.KEQ0765986:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9002005:1 read(QEQ1860372:1) => BidCos-RF.QEQ1860372:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:07:25 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9002006:1 read(KEQ0850700:1) => BidCos-RF.KEQ0850700:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9002007:1 read(KEQ0850562:1) => BidCos-RF.KEQ0850562:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9002008:1 read(JEQ0122686:1) => BidCos-RF.JEQ0122686:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9002009:1 read(JEQ0122680:1) => BidCos-RF.JEQ0122680:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9002010:1 read(KEQ0004930:1) => BidCos-RF.KEQ0004930:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: setup CUX9002013:1 read(LEQ0122925:1) => BidCos-RF.LEQ0122925:1 (WEATHER) DP(|TEMPERATURE|HUMIDITY|)
Aug 21 09:07:25 ccu3-webui.fritz.box cuxd[628]: connection to 127.0.0.1:8183 successfull!
Aug 21 09:07:25 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support system.listMethods
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support system.methodHelp
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support init
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support listDevices
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support deleteDevice
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support getDeviceDescription
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support getParamsetDescription
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support getParamset
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support putParamset
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support getValue
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support setValue
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support reportValueUsage
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support listReplaceableDevices
Aug 21 09:07:26 ccu3-webui.fritz.box rfd: rcux support ping
Aug 21 09:07:27 ccu3-webui.fritz.box multimac: ACK received after 0 repetitions: #01[BiDi|BC|Ren] 2375AB->1F8AAC Info: 06 01 00 00 47
Aug 21 09:07:27 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:27 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:28 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:28 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:28 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:29 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:29 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:29 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:30 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:30 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:30 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:30 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:30 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:31 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:31 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:31 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:1.CMD_QUERY_RET=1 to activate CUX2801001:1.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:1","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:1","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:1.CMD_QUERY_RET=1 to activate CUX2801001:1.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:1","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:1","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:2.CMD_QUERY_RET=1 to activate CUX2801001:2.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:2","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:2","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:2.CMD_QUERY_RET=1 to activate CUX2801001:2.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:2","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:2","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:3.CMD_QUERY_RET=1 to activate CUX2801001:3.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:3","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:3","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:3.CMD_QUERY_RET=1 to activate CUX2801001:3.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:3","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:3","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:4.CMD_QUERY_RET=1 to activate CUX2801001:4.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:4","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:4","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:4.CMD_QUERY_RET=1 to activate CUX2801001:4.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:4","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:4","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:5.CMD_QUERY_RET=1 to activate CUX2801001:5.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:5","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:5","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:5.CMD_QUERY_RET=1 to activate CUX2801001:5.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:5","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:5","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:6.CMD_QUERY_RET=1 to activate CUX2801001:6.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:6","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:6","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:6.CMD_QUERY_RET=1 to activate CUX2801001:6.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:6","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:6","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:7.CMD_QUERY_RET=1 to activate CUX2801001:7.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:7","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:7","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:7.CMD_QUERY_RET=1 to activate CUX2801001:7.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:7","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:7","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:8.CMD_QUERY_RET=1 to activate CUX2801001:8.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:8","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:8","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:8.CMD_QUERY_RET=1 to activate CUX2801001:8.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:8","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:8","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:9.CMD_QUERY_RET=1 to activate CUX2801001:9.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:9","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:9","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:9.CMD_QUERY_RET=1 to activate CUX2801001:9.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:9","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:9","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:10.CMD_QUERY_RET=1 to activate CUX2801001:10.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:10","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:10","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:10.CMD_QUERY_RET=1 to activate CUX2801001:10.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:10","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:10","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:11.CMD_QUERY_RET=1 to activate CUX2801001:11.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:11","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:11","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:11.CMD_QUERY_RET=1 to activate CUX2801001:11.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:11","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:11","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:12.CMD_QUERY_RET=1 to activate CUX2801001:12.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:12","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:12","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:12.CMD_QUERY_RET=1 to activate CUX2801001:12.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:12","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:12","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:13.CMD_QUERY_RET=1 to activate CUX2801001:13.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:13","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:13","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:13.CMD_QUERY_RET=1 to activate CUX2801001:13.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:13","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:13","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:14.CMD_QUERY_RET=1 to activate CUX2801001:14.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:14","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:14","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:14.CMD_QUERY_RET=1 to activate CUX2801001:14.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:14","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:14","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:15.CMD_QUERY_RET=1 to activate CUX2801001:15.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:15","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:15","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:15.CMD_QUERY_RET=1 to activate CUX2801001:15.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:15","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:15","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:16.CMD_QUERY_RET=1 to activate CUX2801001:16.CMD_RETS command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:16","CMD_RETS"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:16","CMD_RETS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box cuxd[628]: use CUX2801001:16.CMD_QUERY_RET=1 to activate CUX2801001:16.CMD_RETL command!
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:8701, params: {"CUX2801001:16","CMD_RETL"}, result: [faultCode:-4,faultString:"Unknown parameter"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1272, params: {"CUX2801001:16","CMD_RETL"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal =  [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"MEQ0092950:3","BRIGHTNESS"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"MEQ0092950:3","BRIGHTNESS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:32 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:32 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:32 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:32 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:33 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:33 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=BRIGHTNESS failed getting physical value.
Aug 21 09:07:33 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"MEQ0669472:3","BRIGHTNESS"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:33 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"MEQ0669472:3","BRIGHTNESS"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:33 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:33 ccu3-webui.fritz.box multimac: ACK received after 0 repetitions: #7B[BiDi|BC|Ren] 37C341->1F8AAC Info: 06 01 C8 00 2D
Aug 21 09:07:34 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:34 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:35 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:35 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:35 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:35 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:35 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:36 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:38 ccu3-webui.fritz.box multimac: No ACK received after 3 repetitions: #01[BiDi|WOR|Ren] 1F8AAC->2757A2 Configuration: 01 0E
Aug 21 09:07:38 ccu3-webui.fritz.box rfd: RFPhysicalDataInterfaceCommand::GetData SendFrame failed for LEVEL_GET
Aug 21 09:07:38 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=STATE failed getting physical value.
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"LEQ0186539:1","STATE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"LEQ0186539:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:38 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0534774:1","TEMPERATURE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0534774:1","TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:38 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0534774:2","TEMPERATURE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0534774:2","TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:38 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0534774:3","TEMPERATURE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0534774:3","TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:38 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0534774:4","TEMPERATURE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0534774:4","TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:38 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0534774:5","TEMPERATURE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0534774:5","TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:38 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:38 ccu3-webui.fritz.box multimac: ACK received after 0 repetitions: #0A[BiDi|BC|Ren] 37D2C0->1F8AAC Info: 06 01 C8 00 5A
Aug 21 09:07:40 ccu3-webui.fritz.box multimac: No ACK received after 3 repetitions: #01[BiDi|Ren] 1F8AAC->452FEF Configuration: 01 0E
Aug 21 09:07:40 ccu3-webui.fritz.box rfd: RFPhysicalDataInterfaceCommand::GetData SendFrame failed for LEVEL_GET
Aug 21 09:07:40 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=STATE failed getting physical value.
Aug 21 09:07:40 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0152679:1","STATE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:40 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0152679:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:40 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:41 ccu3-webui.fritz.box multimac: No ACK received after 3 repetitions: #01[BiDi|Ren] 1F8AAC->449487 Configuration: 01 0E
Aug 21 09:07:41 ccu3-webui.fritz.box rfd: RFPhysicalDataInterfaceCommand::GetData SendFrame failed for LEVEL_GET
Aug 21 09:07:41 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=STATE failed getting physical value.
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0152727:1","STATE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0152727:1","STATE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:41 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0775524:1","TEMPERATURE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0775524:1","TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:41 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0775524:2","TEMPERATURE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0775524:2","TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:41 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0775524:3","TEMPERATURE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0775524:3","TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:41 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0775524:4","TEMPERATURE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0775524:4","TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:41 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0775524:5","TEMPERATURE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0775524:5","TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:41 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0124378:7","DECISION_VALUE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0124378:7","DECISION_VALUE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:41 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0071913:7","DECISION_VALUE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0071913:7","DECISION_VALUE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:41 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0072178:7","DECISION_VALUE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0072178:7","DECISION_VALUE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:41 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"NEQ0072437:7","DECISION_VALUE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"NEQ0072437:7","DECISION_VALUE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:41 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:41 ccu3-webui.fritz.box cuxd[3227]: system(wget --quiet --no-check-certificate --post-data 'token=aQCJoGFiDVBknRBPbewSh3LiW1D1gT&user=uVmoFYfhu1xUi2TtkH4RkGkj7gBVfE&message=Host%20pm3%20is%20Up -O - https://api.pushover.net/1/messages.xml) exit(2) 0s
Aug 21 09:07:42 ccu3-webui.fritz.box rfd: (MEQ0836418) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:43 ccu3-webui.fritz.box rfd: (MEQ0836418) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:43 ccu3-webui.fritz.box rfd: (MEQ0836418) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:43 ccu3-webui.fritz.box rfd: (MEQ0836418) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:43 ccu3-webui.fritz.box rfd: (MEQ0836418) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:44 ccu3-webui.fritz.box rfd: (MEQ0836418) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:44 ccu3-webui.fritz.box rfd: (MEQ0836418) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:44 ccu3-webui.fritz.box cuxd[3299]: system(wget --quiet --no-check-certificate --post-data 'token=aQCJoGFiDVBknRBPbewSh3LiW1D1gT&user=uVmoFYfhu1xUi2TtkH4RkGkj7gBVfE&message=Host%20pm4%20is%20Up -O - https://api.pushover.net/1/messages.xml) exit(2) 0s
Aug 21 09:07:44 ccu3-webui.fritz.box rfd: (MEQ0836418) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:45 ccu3-webui.fritz.box rfd: (MEQ0836418) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:45 ccu3-webui.fritz.box rfd: (MEQ0836418) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:46 ccu3-webui.fritz.box rfd: (NEQ0382194) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:46 ccu3-webui.fritz.box rfd: (NEQ0382194) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:46 ccu3-webui.fritz.box rfd: (NEQ0382194) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:46 ccu3-webui.fritz.box rfd: (NEQ0382194) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:46 ccu3-webui.fritz.box rfd: (NEQ0382194) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:47 ccu3-webui.fritz.box rfd: (NEQ0382194) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:47 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:47 ccu3-webui.fritz.box rfd: (MEQ0460709) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:47 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug 21 09:07:47 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"OEQ0987006:7","DECISION_VALUE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:47 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"OEQ0987006:7","DECISION_VALUE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:47 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:47 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=DECISION_VALUE failed getting physical value.
Aug 21 09:07:47 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"OEQ2277720:7","DECISION_VALUE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:47 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"OEQ2277720:7","DECISION_VALUE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:47 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:48 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::sendBidcosRequest(): Retrying to send request (coprocessor was busy). Retry number 1
Aug 21 09:07:48 ccu3-webui.fritz.box rfd: (CCU2GW0001) CCU2CommController::sendBidcosRequest(): Got response after retry number 1
Aug 21 09:07:48 ccu3-webui.fritz.box rfd: HSSParameter::GetValue() id=TEMPERATURE failed getting physical value.
Aug 21 09:07:48 ccu3-webui.fritz.box ReGaHss: WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc_bin://127.0.0.1:32001, params: {"SEQ0026985:5","TEMPERATURE"}, result: [faultCode:-1,faultString:"Failure"]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]
Aug 21 09:07:48 ccu3-webui.fritz.box ReGaHss: ERROR: XMLRPC 'getValue' call failed (interface: 1007, params: {"SEQ0026985:5","TEMPERATURE"}) [CallGetValue():iseXmlRpc.cpp:1435]
Aug 21 09:07:48 ccu3-webui.fritz.box ReGaHss: ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]
Aug 21 09:07:50 ccu3-webui.fritz.box cuxd[3440]: system(wget --quiet --no-check-certificate --post-data 'token=aQCJoGFiDVBknRBPbewSh3LiW1D1gT&user=uVmoFYfhu1xUi2TtkH4RkGkj7gBVfE&message=Host%20pm6%20is%20Up -O - https://api.pushover.net/1/messages.xml) exit(2) 0s
Aug 21 09:08:04 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:08:14 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","OEQ2277720:2","ACTUAL_HUMIDITY",40.000000}]}) on binary://127.0.0.1:8701/RPC2:
Aug 21 09:08:14 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:08:24 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:08:34 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","OEQ2277720:2","SET_TEMPERATURE",18.500000}],[methodName:"event",params:{"rcux","MEQ0270119:2","BOOT",true}],[methodName:"event",params:{"rcux","MEQ0270119:2","ENERGY_COUNTER",194742.000000}],[methodName:"event",params:{"rcux","MEQ0270119:2","POWER",46.850000}],[methodName:"event",params:{"rcux","MEQ0270119:2","CURRENT",314.000000}],[methodName:"event",params:{"rcux","MEQ0270119:2","VOLTAGE",229.800000}],[methodName:"event",params:{"rcux","MEQ0270119:2","FREQUENCY",50.010000}],[methodName:"event",params:{"rcux","REQ1390511:2","BOOT",true}],[methodName:"event",params:{"rcux","REQ1390511:2","ENERGY_COUNTER",177012.600000}],[methodName:"event",params:{"rcux","REQ1390511:2","POWER",230.640000}],[methodName:"event",params:{"rcux","REQ1390511:2","CURRENT",1021.000000}],[methodName:"event",params:{"rcux","REQ1390511:2","VOLTAGE",229.900000}],[methodName:"event",params:{"rcux","REQ1390511:2","FREQUENCY",50.000000}],[methodN
Aug 21 09:08:34 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:08:44 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:08:54 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","NEQ0071913:2","ACTUAL_TEMPERATURE",25.400000}],[methodName:"event",params:{"rcux","NEQ0071913:2","ACTUAL_HUMIDITY",50.000000}],[methodName:"event",params:{"rcux","NEQ0071913:2","SET_TEMPERATURE",19.000000}],[methodName:"event",params:{"rcux","MEQ0270119:2","BOOT",true}],[methodName:"event",params:{"rcux","MEQ0270119:2","ENERGY_COUNTER",194742.300000}],[methodName:"event",params:{"rcux","MEQ0270119:2","POWER",46.650000}],[methodName:"event",params:{"rcux","MEQ0270119:2","CURRENT",311.000000}],[methodName:"event",params:{"rcux","MEQ0270119:2","VOLTAGE",230.100000}],[methodName:"event",params:{"rcux","MEQ0270119:2","FREQUENCY",49.990000}],[methodName:"event",params:{"rcux","NEQ0117318:2","BOOT",true}],[methodName:"event",params:{"rcux","NEQ0117318:2","ENERGY_COUNTER",20940.600000}],[methodName:"event",params:{"rcux","NEQ0117318:2","POWER",7.220000}],[methodName:"event",params:{"rcux","NEQ0117318:2","CURRENT",67.000000
Aug 21 09:08:54 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:09:04 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
Aug 21 09:09:15 ccu3-webui.fritz.box rfd: XmlRpcClient error calling event({[methodName:"event",params:{"rcux","NEQ0117318:2","BOOT",true}],[methodName:"event",params:{"rcux","NEQ0117318:2","ENERGY_COUNTER",20940.600000}],[methodName:"event",params:{"rcux","NEQ0117318:2","POWER",6.790000}],[methodName:"event",params:{"rcux","NEQ0117318:2","CURRENT",64.000000}],[methodName:"event",params:{"rcux","NEQ0117318:2","VOLTAGE",229.100000}],[methodName:"event",params:{"rcux","NEQ0117318:2","FREQUENCY",49.980000}],[methodName:"event",params:{"rcux","NEQ0071913:0","LOWBAT",true}],[methodName:"event",params:{"rcux","NEQ0071913:1","TEMPERATURE",25.400000}],[methodName:"event",params:{"rcux","NEQ0071913:1","HUMIDITY",50}],[methodName:"event",params:{"rcux","MEQ0270119:2","BOOT",true}],[methodName:"event",params:{"rcux","MEQ0270119:2","ENERGY_COUNTER",194742.600000}],[methodName:"event",params:{"rcux","MEQ0270119:2","POWER",52.080000}],[methodName:"event",params:{"rcux","MEQ0270119:2","CURRENT",342.000000}],[methodName:"event",params:{"rcu
Aug 21 09:09:15 ccu3-webui.fritz.box rfd: XmlRpc transport error
Aug 21 09:09:25 ccu3-webui.fritz.box rfd: XmlRpc transport failed (first try), retrying...
hast Du irgendeine Idee? zw irgendwas auffälliges im Log?

Debug Log kommt auch gleich noch

EDIT: Meehhhh ...Debug Log läuft jetzt seit 10mins und issue ist nicht passoert bisher ... Willst Du trotzdem das Log? Wenn ja vom start oder mal mittendrin (der hat jetzt schon oft rotiert, aber er benennt ja immer nur tnt in txt.0 um, überschreibt also ...

Ingo
Nach oben
apollon77
Beiträge: 308
Registriert: 12.10.2013, 12:32

Re: "XmlRpcClient error calling event ... on binary://127.0.0.1:8701/RPC2"

Beitrag von apollon77 » 21.08.2022, 11:09

Na super ... läuft jetzt über ne Stunde auf Debug Log und Fehler nicht wieder aufgetreten. Mach ich Debug aus passierts wieder sofort.

Das kann das ja nur Timing sein (weil debug log üblicherweise dinge leicht verzögert weil es zeit kostet), oder?!

EDIT: Ok, seit heute früh ohne Fehler :-(
Nach oben
apollon77
Beiträge: 308
Registriert: 12.10.2013, 12:32

Re: "XmlRpcClient error calling event ... on binary://127.0.0.1:8701/RPC2"

Beitrag von apollon77 » 18.09.2022, 19:36

@uwe111 Irgendeine Idee?
Nach oben
Benutzeravatar
uwe111
Beiträge: 4819
Registriert: 26.02.2011, 22:22
Hat sich bedankt: 3 Mal
Danksagung erhalten: 245 Mal
Kontaktdaten:
Kontaktdaten von uwe111

Re: "XmlRpcClient error calling event ... on binary://127.0.0.1:8701/RPC2"

Beitrag von uwe111 » 18.09.2022, 22:13

apollon77 hat geschrieben: ↑
18.09.2022, 19:36
 @uwe111 Irgendeine Idee?
Keine Ahnung. :roll:
Alle sagten: Das geht nicht. Dann kam einer, der wußte das nicht und hat's einfach gemacht.
SPENDEN :wink: Download: CUxD 2.11, SSH KeyDir
Nach oben
apollon77
Beiträge: 308
Registriert: 12.10.2013, 12:32

Re: "XmlRpcClient error calling event ... on binary://127.0.0.1:8701/RPC2"

Beitrag von apollon77 » 18.09.2022, 22:44

Ok, dann schalte ich die Tage debug mal aus und schaue was dann passiert ... sonst läuft halt weiter im Debug :-(

Danke
Nach oben
Antworten

Zurück zu „CUxD“