nach einer Neuinstallation wegen Bookworm habe ich das Problem dass die WebUI nicht erreichbar ist. Die piVCCU scheint aber soweit fehlerfrei zu laufen:
Code: Alles auswählen
pi@piPivCCU:~ $ sudo pivccu-info
piVCCU version: 3.71.12-85
OS: Raspbian GNU/Linux 12 (bookworm)
Kernel: 6.1.0-rpi6-rpi-v7 armv7l
Kernel modules: Available
Raw UART dev: Available
HMRF Hardware: HM-MOD-RPI-PCB
Connected via: GPIO@3f201000.serial (/dev/raw-uart)
Board serial: OEQ0611036
Radio MAC: 0x5C7F92
HMIP Hardware: HM-MOD-RPI-PCB
Connected via: GPIO@3f201000.serial (/dev/raw-uart)
SGTIN: 3014F711A061A7D70992BADC
Radio MAC: 0xBB6073
State: RUNNING
PID: 1208
IP: 192.168.137.94
Link: vethpivccu
TX bytes: 26.03 KiB
RX bytes: 3.31 MiB
Total bytes: 3.34 MiB
Code: Alles auswählen
C:\Users\Admin>ping 192.168.137.94
Ping wird ausgeführt für 192.168.137.94 mit 32 Bytes Daten:
Antwort von 192.168.137.94: Bytes=32 Zeit<1ms TTL=64
Antwort von 192.168.137.94: Bytes=32 Zeit=1ms TTL=64
Antwort von 192.168.137.94: Bytes=32 Zeit=1ms TTL=64
Antwort von 192.168.137.94: Bytes=32 Zeit=1ms TTL=64
Ping-Statistik für 192.168.137.94:
Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0
(0% Verlust),
Ca. Zeitangaben in Millisek.:
Minimum = 0ms, Maximum = 1ms, Mittelwert = 0ms
Code: Alles auswählen
pi@piPivCCU:~ $ sudo pivccu-attach ping www.heise.de
PING www.heise.de (193.99.144.85): 56 data bytes
64 bytes from 193.99.144.85: seq=0 ttl=241 time=69.781 ms
64 bytes from 193.99.144.85: seq=1 ttl=241 time=61.499 ms
64 bytes from 193.99.144.85: seq=2 ttl=241 time=77.353 ms
64 bytes from 193.99.144.85: seq=3 ttl=241 time=61.966 ms
64 bytes from 193.99.144.85: seq=4 ttl=241 time=60.521 ms
^C
--- www.heise.de ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 60.521/66.224/77.353 ms
Weiß gerade nicht wo ich noch ansetzen könnte... Bitte um Hilfe.