zuerst einmal einen großen Dank an Jens und die Community. Wirklich klasse was Ihr hier entwickelt habt!
Ich möchte von EQ3 Max! auf HmIP umstellen. Mir ist klar, dass alle alten Max! Geräte dafür in die Tonne müssen (und da gehören sie m.E. auch hin...). Nun möchte ich aber auf ein stabiles System wechseln, gerade weil mir die ständigen Ausfälle von Max! wahnsinnig auf die Nerven gehen und sie den Wife-Acceptance-Factor erheblich in die Knie gezwungen haben.
Mein Setup soweit
- Mac mini Server als Host, VirtualBox 6.0
- Guest auf Basis OVA RaspberryMatic-3.49.17.20200131, HD vor Start auf 64 GB erweitert -> läuft grundsätzlich
- von Host auf Guest durchgereicht HmIP-RF-USB Stick (in der Telekom Magenta Smarthome Version), auf Guest erkannt als:
Code: Alles auswählen
root@homematic-raspi:~# lsusb
Bus 002 Device 002: ID 1b1f:c020
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Code: Alles auswählen
macserver:~ administrator$ ioreg -p IOUSB
+-o Root <class IORegistryEntry, id 0x100000100, retain 18>
+-o AppleUSBEHCI Root Hub Simulation@1a000000 <class AppleUSBRootHubDevice, $
| +-o IOUSBHostDevice@1a100000 <class AppleUSBDevice, id 0x100000327, regist$
+-o AppleUSBEHCI Root Hub Simulation@1d000000 <class AppleUSBRootHubDevice, $
| +-o IOUSBHostDevice@1d100000 <class AppleUSBDevice, id 0x10000032e, regist$
| +-o IOUSBHostDevice@1d180000 <class AppleUSBDevice, id 0x100000365, regi$
| +-o BRCM20702 Hub@1d181000 <class AppleUSBDevice, id 0x100000382, regi$
| | +-o Bluetooth USB Host Controller@1d181300 <class AppleUSBDevice, id$
| +-o IR Receiver@1d182000 <class AppleUSBDevice, id 0x100000394, regist$
+-o AppleUSBXHCI Root Hub Simulation@14000000 <class AppleUSBRootHubDevice, $
+-o IOUSBHostDevice@14100000 <class AppleUSBDevice, id 0x10000034f, regist$
+-o Eaton 3S@14200000 <class AppleUSBDevice, id 0x1000003ad, registered, m$
+-o eQ-3 HmIP-RFUSB@14300000 <class AppleUSBDevice, id 0x100000905, regist$
...und nicht ganz überraschend kommt folglich bei "Geräte anlernen" auch die Fehlermeldung
Das Fehlerfenster kommt allerdings erst, nachdem das Anlernfenster vorher m.E. normal von 60 sek runterzählt.Homematic Funk Anlernmodus konnte nicht aktiviert werden.
Bestimmt habe ich in dem inzwischen ziemlichen langen Thread zu virtuellen Raspberrymatics an irgendeiner Stelle ein Detail überlesen. Kann mir jemand helfen?
Danke vorab!